Netatmo Wetterstation (incl. CO2 Messung) einbinden

hwegsche · Beitrag von **hwegsche** » 28.12.2016, 18:37

So, jetzt läuft wieder alles. Habe die CuxD Geräte gelöscht, neu angelegt und konfiguriert. Warum dies geschah weiß ich nicht, aber hab ja sonst nichts zu tun [emoji6].
Danke Euch allen für die Hilfe...

Harald

Gesendet von iPad mit Tapatalk Pro

michacolonia · Beitrag von **michacolonia** » 14.01.2017, 19:24

Hallo,
ich habe nach einem Werksreset und einer Neuinstallation in SynTime nur ??? stehen.
Habe ich etwas vergessen oder übersehen?

Grüße
michacolonia

Indigo · Beitrag von **Indigo** » 14.01.2017, 19:49

Wenn der Rest passt ist wahrscheinlich ein Tippfehler in der Systenvariablen oder ganz am Ende im Tcl Script.

Gesendet von iPhone mit Tapatalk

Franzens · Beitrag von **Franzens** » 15.01.2017, 12:31

Hallo zusammen,

ich hab mich an der Anleitung auf Seite 4 dieses Threads orientiert.
Ich besitze ein Innenmodul, ein Aussenmodul, einen Regen- und einen Windmesser.

ich habe alles soweit installiert, bekomme aber im Terminal immer folgendes:

# tclsh /usr/local/addons/netatmo/netatmo.tcl
info: found stored credentials
info: token is still valid
can't read "otemp": no such variable
while executing
"log info "Outside temperature is $otemp""
(file "/usr/local/addons/netatmo/netatmo.tcl" line 174)

Ich denke es liegt an den Device-ID´s - vielleicht kann mir jemand sagen, wie auf der aktuellen Netatmo-Seite an diese Informationen für alle genannten Module dran komme - der Link von Seite 4 funktioniert so jedenfalls nicht mehr:

Hier noch mein Skript - bei dem ich mir allerdings auch nicht sicher bin, ob dies aktuell ist - Regen und Windmesser denke ich sind noch gar nicht drin. Ich weiß auch nicht, wie ich die im CUXD anlegen muss.

Wäre nett, wenn mir jemand den entscheidenden Fingerzeig geben könnte

Franzens

Code: Alles auswählen

#!/bin/tclsh

    load tclrega.so

    #---------------------------------------------------------------------------------------------------------------#
    #                                                   CONFIG                                                      #
    #---------------------------------------------------------------------------------------------------------------#
    #  to obtain your own client ID and API key please register a new app here: http://dev.netatmo.com/dev/listapps
    set clientId "xxxxxxxxxxb11e8828b5908"                     
    set clientSecret "xxxxxxxxxxxxxxxxxxxxxxxxxxxxwGo2vomQFvX"
    #  the following are your normal netatmo credentials (the ones you used to setup your netatmo weather station)
    set username "xxxxxxxxxxxx@mail.com"
    set password "xxxxxxxxx"
    #  the following are MAC addresses of your indoor station and the outside module
    set deviceid "xx:xx:50:03:xx:08"
    set moduleid "xx:xx:50:01:xx:3a"

    set ::env(LD_LIBRARY_PATH) "/usr/local/addons/cuxd"
    set cfgfile "/tmp/netatmo.dat"
    set logtag "netatmo.tcl"
    set logfacility "local1"
    # 0=panic, 1=alert 2=crit 3=err 4=warn 5=notice 6=info 7=debug
    set loglevel 6
    #---------------------------------------------------------------------------------------------------------------#

    #---------------------------------------------------------------------------------------------------------------#
    #                                              GLOBAL VARIABLES                                                                #
    #---------------------------------------------------------------------------------------------------------------#
    set accesstoken ""
    set refreshtoken ""
    set tokenexpires 0
    #---------------------------------------------------------------------------------------------------------------#


    set loglevels {panic alert crit err warn notice info debug}

    proc log {lvl msg} {
        global logtag
        global logfacility
        global loglevel
        global loglevels
       
        set lvlnum [lsearch $loglevels $lvl]
       
        if {$lvlnum <= $loglevel} {
            if {$lvlnum <= 3} {
                catch {exec logger -s -t $logtag -p $logfacility.$lvl $msg}
            } else {
                puts "$lvl: $msg"
                catch {exec logger -t $logtag -p $logfacility.$lvl $msg}
            }
           
        }
       
    }

    proc refreshToken {rt ci cs} {
        log debug "refreshing token"
        set url "https://api.netatmo.net/oauth2/token"
        set header "Content-Type: application/x-www-form-urlencoded;charset=UTF-8"
        set parameter "grant_type=refresh_token&refresh_token=$rt&client_id=$ci&client_secret=$cs"

        catch {exec /usr/local/addons/cuxd/curl -k -i -H $header -X POST -d $parameter $url} response
        log debug "response was $response"
       
        return $response

    }

    proc requestToken {ci cs un pw} {
        log "debug" "requesting new token"
        set url "https://api.netatmo.net/oauth2/token"
        set header "Content-Type: application/x-www-form-urlencoded;charset=UTF-8"
        set parameter "grant_type=password&client_id=$ci&client_secret=$cs&username=$un&password=$pw"

        catch {exec /usr/local/addons/cuxd/curl -k -i -H $header -X POST -d $parameter $url} response
        log debug "response was $response"
       
        return $response

    }

    proc parseOAuthResponse {input} {
        log debug "parsing authentication result"
        global accesstoken
        global refreshtoken
       
        regexp {HTTP/1.1\s(\d*)} $input dummy returncode
        regexp {\"access_token\":\"(.*?)\"} $input dummy accesstoken
        regexp {\"refresh_token\":\"(.*?)\"} $input dummy refreshtoken
        regexp {\"expires_in\":(.*?)\,} $input dummy expiresin

        log debug "returncode is $returncode"
        log debug "access token is $accesstoken"
        log debug "refresh token is $refreshtoken"
        log debug "expires in $expiresin"
       
        if {[expr $returncode]!=200} {
                log error "Authentication failed with code $returncode and response $input"
                exit 1
            }
       
        return $expiresin
    }

    proc saveAccessToken {expin} {
        global accesstoken
        global refreshtoken
        global tokenexpires
        global cfgfile
           
        log debug "saving new access token to $cfgfile"
       
        set fileId [open $cfgfile "w"]
       
        set now [clock seconds]
        set tokenexpires [expr $now + $expin]
       
        puts $fileId $accesstoken
        puts $fileId $refreshtoken
        puts $fileId $tokenexpires
        close $fileId
    }

    proc loadAccessToken {} {
        global accesstoken
        global refreshtoken
        global tokenexpires
        global cfgfile
       
        log debug "loading stored credentials from $cfgfile"
       
        set fp [open $cfgfile r]
        set file_data [read $fp]
        close $fp
       
        log debug "file data is: $file_data"
       
        set data [split $file_data "\n"]   
       
        set accesstoken [lindex $data 0]
        set refreshtoken [lindex $data 1]
        set tokenexpires [lindex $data 2]
    }

    log debug "script has started"

    if { [file exists $cfgfile] == 1} {
        log info "found stored credentials"
            loadAccessToken
            set now [clock seconds]
            log debug "current time is [clock format $now -format "%Y-%m-%dT%H:%M:%S"], token is valid until [clock format $tokenexpires -format "%Y-%m-%dT%H:%M:%S"]"
            if {[expr $now >= $tokenexpires] == 1} {
                log notice "token has already expired"
                saveAccessToken [parseOAuthResponse [refreshToken $refreshtoken $clientId $clientSecret]]
                log notice "oauth token successfully refreshed"
            } else {
                log info "token is still valid"
            }
        } else {
            log warn "no stored credentials found"
            saveAccessToken [parseOAuthResponse [requestToken $clientId $clientSecret $username $password]]
            log notice "oauth token successfully initialized"
        }

    log debug "polling outdoor module..."
    set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$moduleid&scale=max&type=Temperature,Humidity&date_end=last"
    log debug "querying $url"
    catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
    log debug "response is: $response"

    regexp {\"value\":\[\[(.*?),(.*?)\]} $response dummy otemp ohum
                       
    log info "Outside temperature is $otemp"
    log info "Outside humidity is $ohum"

    log debug "polling main module..."
    set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&scale=max&type=Temperature,Humidity,CO2,Pressure,Noise&date_end=last"
    log debug "querying $url"
    catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
    log debug "response is: $response"

    regexp {\"value\":\[\[(.*?),(.*?),(.*?),(.*?),(.*?)\]} $response dummy itemp ihum ico2 ipressure inoise
                       
    log info "Inside temperature is $itemp"
    log info "Inside humidity is $ihum"
    log info "Inside CO2 level $ico2"
    log info "Inside pressure is $ipressure"
    log info "Inside noise level is $inoise"

    #
    # set ReGaHss variables
    #
    set rega_cmd ""
    append rega_cmd "var ITemp = dom.GetObject('CUxD.CUX9002001:1.SET_TEMPERATURE');"
    append rega_cmd "var IHumi = dom.GetObject('CUxD.CUX9002001:1.SET_HUMIDITY');"
    append rega_cmd "var OTemp = dom.GetObject('CUxD.CUX9002002:1.SET_TEMPERATURE');"
    append rega_cmd "var OHumi = dom.GetObject('CUxD.CUX9002002:1.SET_HUMIDITY');"
    append rega_cmd "var IPress = dom.GetObject('Luftdruck');"
    append rega_cmd "var ICO2 = dom.GetObject('CO2');"
    append rega_cmd "var INoise = dom.GetObject('Sonometer');"
    append rega_cmd "OTemp.State('$otemp');"
    append rega_cmd "OHumi.State('$ohum');"
    append rega_cmd "ITemp.State('$itemp');"
    append rega_cmd "IHumi.State('$ihum');"
    append rega_cmd "IPress.State('$ipressure');"
    append rega_cmd "ICO2.State('$ico2');"
    append rega_cmd "INoise.State('$inoise');"
    append rega_cmd "var sdatetime = system.Date('%d.%m.%Y %H:%M:%S');"
    append rega_cmd "var netatmosynctime = dom.GetObject('SyncTime');"
    append rega_cmd "netatmosynctime.Variable(sdatetime.ToString());"
    rega_script $rega_cmd

Indigo · Beitrag von **Indigo** » 15.01.2017, 13:52

Hallo.

Kennst du dieses HowTo hier?

http://homematic-forum.de/forum/viewtop ... 31&t=28188

Wenn nicht schau dir das mal an und wenn du dann immernoch nicht weiterkommst helfe ich gerne weiter.

Grüße

Franzens · Beitrag von **Franzens** » 15.01.2017, 16:04

Nicht mehr nötig.
Ganz großes Kompliment.

Alles läuft!
Vielen Dank

Franzens

ab_home · Beitrag von **ab_home** » 16.01.2017, 19:45

Erstmal ein großes Lob für das tolle How-to. Es hat gleich beim ersten Versuch alles funktioniert, obwohl ich bestenfalls ansatzweise verstehe, was eigentlich passiert ...

Da ich zwei zusätzliche Innenmodule besitze, wollte ich diese ebenfalls einbeziehen. Das hat leider gleich beim ersten Modul nicht funktioniert. Ich habe eine zusätzliche Systemvariable "CO2-2" angelegt und ein weiteres CUxD-Gerät analog zum How-To.

Im Code habe ich folgendes eingefügt:
1. "Roter Bereich"

Code: Alles auswählen

   set module2id "03:00:00:xx:xx:xx"

2. Hinter dem "Grünen Bereich"

Code: Alles auswählen

    log debug "polling zusatzmodule2..."
    set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$module2id&scale=max&type=Temperature,Humidity,CO2&date_end=last"
    log debug "querying $url"
    catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
    log debug "response is: $response"

    regexp {\"value\":\[\[(.*?),(.*?),(.*?)\]} $response dummy ztemp zhum zco2

    log info "LogI is $response"             
    log info "Inside temperature is $ztemp"
    log info "Inside humidity is $zhum"
    log info "Inside CO2 level $zco2"

3. Am Ende (die eingerückten Zeilen)

Code: Alles auswählen

append rega_cmd "var ZTemp = dom.GetObject('CUxD.CUX9002003:1.SET_TEMPERATURE');"
append rega_cmd "var ZHumi = dom.GetObject('CUxD.CUX9002003:1.SET_HUMIDITY');"
append rega_cmd "var ZCO2-2 = dom.GetObject('CO2-2');"
append rega_cmd "ZTemp.State('$ztemp');"
append rega_cmd "ZHumi.State('$zhum');"
append rega_cmd "ZCO2-2.State('$zco2');"
	append rega_cmd "var sdatetime = system.Date('%d.%m.%Y %H:%M:%S');"
    append rega_cmd "var netatmosynctime = dom.GetObject('SyncTime');"
    append rega_cmd "netatmosynctime.Variable(sdatetime.ToString());"
    rega_script $rega_cmd

Nach Ausführung bekam ich folgende Rückmeldung (Nur das Ende, den Anfang habe ich weggelassen):

info: Inside temperature is 22.7
info: Inside humidity is 34
info: Inside CO2 level 581
Content size mismatch
header:

body:

while executing
"rega_script $rega_cmd
"
(file "/usr/local/addons/netatmo/netatmo.tcl" line 265)

Danach war die CCU2 über die Web-Oberfläche nicht mehr ansprechbar. Angeblich "beschäftigt" ...
Ein reboot über die SSH-Verbindung hat immerhin geholfen.

Für einen Tipp wäre ich sehr dankbar!
AB

Indigo · Beitrag von **Indigo** » 17.01.2017, 08:00

Hallo,

Poste mal dein ganzes Skript bitte.
Sollte nur eine Kleinigkeit sein.

Grüße

ab_home · Beitrag von **ab_home** » 17.01.2017, 20:39

Hallo,
hier das ganze Skript:

Code: Alles auswählen

    #!/bin/tclsh

    load tclrega.so

    #---------------------------------------------------------------------------------------------------------------#
    #                                                   CONFIG                                                      #
    #---------------------------------------------------------------------------------------------------------------#
    #  to obtain your own client ID and API key please register a new app here: http://dev.netatmo.com/dev/listapps
    set clientId "xxx"                     
    set clientSecret "xxx"
    #  the following are your normal netatmo credentials (the ones you used to setup your netatmo weather station)
    set username "xxx"
    set password "xxx"
    #  the following are MAC addresses of your indoor station and the outside module and rain module
    set deviceid "xxx"
    set moduleid "xxx"
    set rainid "xxx"
    set module2id "xxx"
    set module3id "xxx"
    
    set ::env(LD_LIBRARY_PATH) "/usr/local/addons/cuxd"
    set cfgfile "/tmp/netatmo.dat"
    set logtag "netatmo.tcl"
    set logfacility "local1"
    # 0=panic, 1=alert 2=crit 3=err 4=warn 5=notice 6=info 7=debug
    set loglevel 6
    #---------------------------------------------------------------------------------------------------------------#

    #---------------------------------------------------------------------------------------------------------------#
    #                                              GLOBAL VARIABLES                                                                #
    #---------------------------------------------------------------------------------------------------------------#
    set accesstoken ""
    set refreshtoken ""
    set tokenexpires 0
    #---------------------------------------------------------------------------------------------------------------#


    set loglevels {panic alert crit err warn notice info debug}

    proc log {lvl msg} {
        global logtag
        global logfacility
        global loglevel
        global loglevels
       
        set lvlnum [lsearch $loglevels $lvl]
       
        if {$lvlnum <= $loglevel} {
            if {$lvlnum <= 3} {
                catch {exec logger -s -t $logtag -p $logfacility.$lvl $msg}
            } else {
                puts "$lvl: $msg"
                catch {exec logger -t $logtag -p $logfacility.$lvl $msg}
            }
           
        }
       
    }

    proc refreshToken {rt ci cs} {
        log debug "refreshing token"
        set url "https://api.netatmo.net/oauth2/token"
        set header "Content-Type: application/x-www-form-urlencoded;charset=UTF-8"
        set parameter "grant_type=refresh_token&refresh_token=$rt&client_id=$ci&client_secret=$cs"

        catch {exec /usr/local/addons/cuxd/curl -k -i -H $header -X POST -d $parameter $url} response
        log debug "response was $response"
       
        return $response

    }

    proc requestToken {ci cs un pw} {
        log "debug" "requesting new token"
        set url "https://api.netatmo.net/oauth2/token"
        set header "Content-Type: application/x-www-form-urlencoded;charset=UTF-8"
        set parameter "grant_type=password&client_id=$ci&client_secret=$cs&username=$un&password=$pw"

        catch {exec /usr/local/addons/cuxd/curl -k -i -H $header -X POST -d $parameter $url} response
        log debug "response was $response"
       
        return $response

    }

    proc parseOAuthResponse {input} {
        log debug "parsing authentication result"
        global accesstoken
        global refreshtoken
       
        regexp {HTTP/1.1\s(\d*)} $input dummy returncode
        regexp {\"access_token\":\"(.*?)\"} $input dummy accesstoken
        regexp {\"refresh_token\":\"(.*?)\"} $input dummy refreshtoken
        regexp {\"expires_in\":(.*?)\,} $input dummy expiresin

        log debug "returncode is $returncode"
        log debug "access token is $accesstoken"
        log debug "refresh token is $refreshtoken"
        log debug "expires in $expiresin"
       
        if {[expr $returncode]!=200} {
                log error "Authentication failed with code $returncode and response $input"
                exit 1
            }
       
        return $expiresin
    }

    proc saveAccessToken {expin} {
        global accesstoken
        global refreshtoken
        global tokenexpires
        global cfgfile
           
        log debug "saving new access token to $cfgfile"
       
        set fileId [open $cfgfile "w"]
       
        set now [clock seconds]
        set tokenexpires [expr $now + $expin]
       
        puts $fileId $accesstoken
        puts $fileId $refreshtoken
        puts $fileId $tokenexpires
        close $fileId
    }

    proc loadAccessToken {} {
        global accesstoken
        global refreshtoken
        global tokenexpires
        global cfgfile
       
        log debug "loading stored credentials from $cfgfile"
       
        set fp [open $cfgfile r]
        set file_data [read $fp]
        close $fp
       
        log debug "file data is: $file_data"
       
        set data [split $file_data "\n"]   
       
        set accesstoken [lindex $data 0]
        set refreshtoken [lindex $data 1]
        set tokenexpires [lindex $data 2]
    }

    log debug "script has started"

    if { [file exists $cfgfile] == 1} {
        log info "found stored credentials"
            loadAccessToken
            set now [clock seconds]
            log debug "current time is [clock format $now -format "%Y-%m-%dT%H:%M:%S"], token is valid until [clock format $tokenexpires -format "%Y-%m-%dT%H:%M:%S"]"
            if {[expr $now >= $tokenexpires] == 1} {
                log notice "token has already expired"
                saveAccessToken [parseOAuthResponse [refreshToken $refreshtoken $clientId $clientSecret]]
                log notice "oauth token successfully refreshed"
            } else {
                log info "token is still valid"
            }
        } else {
            log warn "no stored credentials found"
            saveAccessToken [parseOAuthResponse [requestToken $clientId $clientSecret $username $password]]
            log notice "oauth token successfully initialized"
        }

    log debug "polling outdoor module..."
    set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$moduleid&scale=max&type=Temperature,Humidity&date_end=last"
    log debug "querying $url"
    catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
    log debug "response is: $response"

    regexp {\"value\":\[\[(.*?),(.*?)\]} $response dummy otemp ohum

    log info "Outside temperature is $otemp"
    log info "Outside humidity is $ohum"

    log debug "polling main module..."
    set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&scale=max&type=Temperature,Humidity,CO2,Pressure,Noise&date_end=last"
    log debug "querying $url"
    catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
    log debug "response is: $response"

    regexp {\"value\":\[\[(.*?),(.*?),(.*?),(.*?),(.*?)\]} $response dummy itemp ihum ico2 ipressure inoise
    
    log info "LogI is $response"              
    log info "Inside temperature is $itemp"
    log info "Inside humidity is $ihum"
    log info "Inside CO2 level $ico2"
    log info "Inside pressure is $ipressure"
    log info "Inside noise level is $inoise"

    log debug "polling regensensor module...1d"
    set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$rainid&scale=1day&type=sum_rain&date_end=last"
    log debug "querying $url"
    catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
    log debug "response is: $response"

    regexp {\"value\":\[\[(.*?)\]} $response dummy rain1d
    
    log info "LogR is $response"                
    log info "Outside Regen1d is $rain1d"

    log debug "polling regensensor module...30min"
    set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$rainid&scale=30min&type=Rain,sum_rain&date_end=last"
    log debug "querying $url"
    catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
    log debug "response is: $response"

    regexp {\"value\":\[\[(.*?),(.*?)\]} $response dummy rain2 rain30min
    
    log info "LogR is $response"                
    log info "Outside rain2 is $rain2"
    log info "Outside Regen30min is $rain30min"

    log debug "polling zusatzmodule2..."
    set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$module2id&scale=max&type=Temperature,Humidity,CO2&date_end=last"
    log debug "querying $url"
    catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
    log debug "response is: $response"

    regexp {\"value\":\[\[(.*?),(.*?),(.*?)\]} $response dummy ztemp zhum zco2

    log info "LogI is $response"             
    log info "Inside temperature is $ztemp"
    log info "Inside humidity is $zhum"
    log info "Inside CO2 level $zco2"


    #
    # set ReGaHss variables
    #
    set rega_cmd ""
    append rega_cmd "var ITemp = dom.GetObject('CUxD.CUX9002001:1.SET_TEMPERATURE');"
    append rega_cmd "var IHumi = dom.GetObject('CUxD.CUX9002001:1.SET_HUMIDITY');"
    append rega_cmd "var OTemp = dom.GetObject('CUxD.CUX9002002:1.SET_TEMPERATURE');"
    append rega_cmd "var OHumi = dom.GetObject('CUxD.CUX9002002:1.SET_HUMIDITY');"
    append rega_cmd "var Rain1 = dom.GetObject('Regenmenge_30min');"
    append rega_cmd "var Rain2 = dom.GetObject('Regenmenge_1d');"
    append rega_cmd "var Rain3 = dom.GetObject('Regen_aktuell');"
    append rega_cmd "var IPress = dom.GetObject('Luftdruck');"
    append rega_cmd "var ICO2 = dom.GetObject('CO2-1');"
    append rega_cmd "var INoise = dom.GetObject('Sonometer');"
    append rega_cmd "OTemp.State('$otemp');"
    append rega_cmd "OHumi.State('$ohum');"
    append rega_cmd "ITemp.State('$itemp');"
    append rega_cmd "IHumi.State('$ihum');"
    append rega_cmd "IPress.State('$ipressure');"
    append rega_cmd "ICO2.State('$ico2');"
    append rega_cmd "INoise.State('$inoise');"
    append rega_cmd "Rain1.State('$rain30min');"
    append rega_cmd "Rain2.State('$rain1d');"
    append rega_cmd "Rain3.State('$rain2');"
append rega_cmd "var ZTemp = dom.GetObject('CUxD.CUX9002003:1.SET_TEMPERATURE');"
append rega_cmd "var ZHumi = dom.GetObject('CUxD.CUX9002003:1.SET_HUMIDITY');"
append rega_cmd "var ZCO2-2 = dom.GetObject('CO2-2');"
append rega_cmd "ZTemp.State('$ztemp');"
append rega_cmd "ZHumi.State('$zhum');"
append rega_cmd "ZCO2-2.State('$zco2');"
	append rega_cmd "var sdatetime = system.Date('%d.%m.%Y %H:%M:%S');"
    append rega_cmd "var netatmosynctime = dom.GetObject('SyncTime');"
    append rega_cmd "netatmosynctime.Variable(sdatetime.ToString());"
    rega_script $rega_cmd

Viele Grüße

Indigo · Beitrag von **Indigo** » 18.01.2017, 14:34

Hi,

ok. Nicht so einfach.
Ein offensichtlicher Fehler fällt mir nicht auf. Aber das Script stolpert im letzten Teil über irgendetwas.
Es könnte sein dass das Script deinen Variablennamen ZCO2-2 als Rechenaufgabe interpretiert.
Ist ziemlich ins Blaue geraten aber nenne diese Variable doch mal einfach ZCO2 analog zu ZTemp und ZHumi.
Kommt zweimal in den letzten zeilen vor.

Ich hoffe es bringt etwas. Ansonsten forschen wir weiter.

HomeMatic-Forum / FHZ-Forum

Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden

Re: Netatmo Wetterstation (incl. CO2 Messung) einbinden