Timer auf YAHM System mit "Zahnausfall"

[JoDi]

Nachdem ich unter YAHM Probleme mit dem regelmäßigen Timer der GUI hatte wurde ich auf den CUxD Timer gestoßen.
Super Sache das Ding, wenn er denn Lust hat.
Leider hat der Timer in nicht erkennbaren Rhythmen "Zahnausfall" und löst nicht aus (sieht Screenshot).
Ist das ein bekanntes Phänomen unter YAHM auf Raspi 2 ? Irgendein Trick dagegen bekannt?

Jeder der Timer löst eine gewisse Anzahl Scripte aus, die primär Temperatursensoren abfragen oder Sollwerte rechnen und in Systemvariable schreiben. Nix wildes.

An der Zeit unten rechts sieht man, wie micht das Thema beschäftigt. Ich würde gerne mehr Funktionen von CUxD einsetzen, allerdings bekomme ich es derzeit nicht wirklich zuverlässig zum Laufen, also bislang keine Option für Dinge die passieren müssen weil sonst etwas nicht äuft (WAF und so ... und meine eigene Acceptance auch). Bevor ich dem System meine Fußbodenheizung anvertraue muss das sitzen.

Bin für jeden Hinweis dankbar.

[uwe111]

Bin für jeden Hinweis dankbar.

Dazu müsstest Du etwas mehr Details Deines Tests verraten.

Der CUxD-Timer sendet Events an die CCU-Logikschicht. Und das tut er m.E. auch zuverlässig. Das Problem liegt hier meistens an der Triggerung von Programmverknüpfungen durch die Logikschicht der CCU.

Als Alternative kannst Du mittels CUxD-Timer auch Befehlszeilen auf Systemebene aufrufen. Das funktioniert sicher.

Viele Grüße

Uwe

[JoDi]

Dann versuche ich mal, die Details zusammenzustellen soweit ich mich da auskenne. Vielleicht liegt das Problem ja an ganz anderer Stelle.
Wie gesagt YAHM auf Raspberry Pi 2.
Ein CUxD Timer Device mit 5 Timern für 2min, 5 min, 10min, 15min, 30min, 1h. Alle nach dem gleichen Schema wie im Screenshot

Per Abfrage von TIMER_GET werden dann gemäß CUxD Anleitung die entsprechenden Skripte angestoßen.

Nicht sicher ob das <= 1s ok ist. Ich wollte sicher gehen, dass die programme ausgeführt wurden, falls YAHM mal einen Punkt verpasst, allerdings könnte es dann wohl sein dass die Programme alle 2mal ausgeführt werden, bei 1s und bei 0s fällt mir gerade auf. Mache ich besser auf 0s wie im Handbuch.

CUxD läuft nicht besonders stabil auf dem System. Nach einiger Zeit kommt beim Aufruf oft nur noch eine Textseite, auf der man ein paar Wahlmöglichkeiten hat, z.B. CUXd Restart. Nach Restart läuft es wieder und man kommt auf die normale Infoseite.
Auch kommen nach Änderungen an Timerprogrammen in der CCU GUI oft keine Timer_Get Werte mehr an. Letztes Mal hatte ich alle Programme überarbeitet und am nächsten Morgen im Historian festgestellt, dass danach keine Werte mehr angekommen waren.

In den CUxD Logs auf der Info Seite meckert auch einiges.

CUxD Syslog:

Code: Alles auswählen

Nov 17 07:08:46 homematic-ccu2 daemon.warn cuxd[319]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Nov 17 07:08:48 homematic-ccu2 daemon.warn cuxd[319]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Nov 17 07:09:13 homematic-ccu2 daemon.info cuxd[319]: INIT 'xmlrpc_bin://127.0.0.1:1999' '16439'
Nov 17 07:12:49 homematic-ccu2 daemon.info cuxd[319]: INIT 'binary://192.168.188.13:2011' 'CUxD'
Nov 17 07:37:16 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 09:46:08 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 12:49:43 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 12:49:50 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 12:49:57 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 12:50:45 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 15:13:26 homematic-ccu2 daemon.notice cuxd[319]: closing fd(8) (192.168.188.13:42749) idle(28837s)
Nov 17 23:09:01 homematic-ccu2 daemon.err cuxd[319]: Received SIGSEGV signal.
Nov 18 06:58:24 homematic-ccu2 daemon.info cuxd[2877]: write_pid /var/run/cuxd.pid [2877]
Nov 18 06:58:24 homematic-ccu2 daemon.info cuxd[2877]: CUx-Daemon(1.8) on CCU(2.21.10) start PID:2877
Nov 18 06:58:24 homematic-ccu2 daemon.info cuxd[2877]: write_proxy /var/cache/cuxd_proxy.ini (127.0.0.1 8700 2877 /usr/local/addons/cuxd/ 1.8)
Nov 18 08:16:26 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 12:27:25 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 15:47:13 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 17:07:25 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 17:21:31 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 17:21:38 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 17:21:46 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 18:52:01 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 21:31:25 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 22:05:30 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out

Full Syslog:

Code: Alles auswählen

Nov 18 21:31:10 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 21:31:20 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0964183:2","BOOT",true}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 21:31:20 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 21:31:25 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 21:31:29 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 21:53:50 homematic-ccu2 user.err hs485d: response timeout
Nov 18 21:53:50 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 21:53:59 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0730134:4","CONTROL_MODE",0}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 21:53:59 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 21:54:09 homematic-ccu2 user.err hs485d: UnifiedLanCommController::connect(): Unable to connect.
Nov 18 21:54:19 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0730134:4","FAULT_REPORTING",0}],[methodName:"event",params:{"BidCos-RF","KEQ0730134:4","BATTERY_STATE",3.000000}],[methodName:"event",params:{"BidCos-R
Nov 18 21:54:19 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 21:54:23 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 22:05:24 homematic-ccu2 user.err hs485d: response timeout
Nov 18 22:05:24 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 22:05:30 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 22:05:33 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 22:52:38 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 22:53:15 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 22:53:15 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 22:53:37 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 22:53:37 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 23:04:56 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 23:05:05 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 23:05:05 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]

Die IP, die ständig angemeckert wird, ist die des CCU Historian Raspi merke ich gerade. Muss ich prüfen, warum der manchmal weg ist, hängt direkt am LAN, aber davon sollte sich doch eigentlich die Kommunikation zwischen dem YAHM Raspi und seinem CUxD nicht stören lassen. Während der Timer Aussetzer ist definitiv nicht nur die Aufzeichnung per Historian gestört sondern die vom Timer getriggerten Programme werden definitiv nicht ausgeführt.

Kann man damit eher die Richtung weisen, in der mein Problem liegt? Bin ich damit eher im CUxD Forum oder YAHM Forum richtig ?

Danke schonmal für die Durchsicht.

[uwe111]

Die CUxD-Abstürze hier sollten wir genauer untersuchen:

Code: Alles auswählen

Nov 17 23:09:01 homematic-ccu2 daemon.err cuxd[319]: Received SIGSEGV signal.

Kannst Du das CUxD-LOGFILE aktivieren und mir nach einem CUxD-Absturz zur Verfügung stellen?

Viele Grüße

Uwe

[JoDi]

Gerne, ich kämpfe mich durch die Anleitung.
Allerdings, da es ein YAHM ist, bin ich nicht sicher, in welchem Filesystem ich das Logfile anlegen lassen muss. In der "virtuellen" CCU Umgebung im Container, die ja auch eine Ordnerstruktur hat, oder auf dem realen Hostsystem des Raspberry?

Bis ich morgen sehe ob das funktioniert hat wäre hier schonmal der Full Syslog (all) seit heute morgen

Code: Alles auswählen

Nov 17 06:17:12 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Nov 17 06:17:12 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2016-07-21 11:45:01 CEST)
Nov 17 05:17:12 homematic-ccu2 daemon.err udevd[50]: specified group 'dialout' unknown
Nov 17 05:17:12 homematic-ccu2 daemon.err udevd[50]: specified group 'kmem' unknown
Nov 17 05:17:12 homematic-ccu2 daemon.err udevd[50]: specified group 'video' unknown
Nov 17 05:17:12 homematic-ccu2 daemon.err udevd[50]: specified group 'lp' unknown
Nov 17 05:17:12 homematic-ccu2 daemon.err udevd[50]: specified group 'floppy' unknown
Nov 17 05:17:12 homematic-ccu2 daemon.err udevd[50]: specified group 'cdrom' unknown
Nov 17 05:17:12 homematic-ccu2 daemon.err udevd[50]: specified group 'tape' unknown
Nov 17 05:17:13 homematic-ccu2 daemon.err udevd[54]: inotify_add_watch(6, /dev/loop0, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[59]: inotify_add_watch(6, /dev/loop5, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[60]: inotify_add_watch(6, /dev/loop6, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[70]: inotify_add_watch(6, /dev/ram11, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[56]: inotify_add_watch(6, /dev/loop3, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[72]: inotify_add_watch(6, /dev/ram13, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[66]: inotify_add_watch(6, /dev/ram1, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[71]: inotify_add_watch(6, /dev/ram12, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[80]: inotify_add_watch(6, /dev/ram3, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[63]: inotify_add_watch(6, /dev/ram0, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[62]: inotify_add_watch(6, /dev/loop7, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[69]: inotify_add_watch(6, /dev/ram10, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[82]: inotify_add_watch(6, /dev/ram5, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[84]: inotify_add_watch(6, /dev/ram6, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[85]: inotify_add_watch(6, /dev/ram7, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[74]: inotify_add_watch(6, /dev/ram15, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[87]: inotify_add_watch(6, /dev/ram9, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[81]: inotify_add_watch(6, /dev/ram4, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[86]: inotify_add_watch(6, /dev/ram8, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[73]: inotify_add_watch(6, /dev/ram14, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[75]: inotify_add_watch(6, /dev/ram2, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[54]: inotify_add_watch(6, /dev/loop1, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[58]: inotify_add_watch(6, /dev/loop4, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[52]: inotify_add_watch(6, /dev/mmcblk0, 10) failed: No such file or directory
Nov 17 05:17:14 homematic-ccu2 daemon.err udevd[55]: inotify_add_watch(6, /dev/loop2, 10) failed: No such file or directory
Nov 17 05:17:16 homematic-ccu2 daemon.err udevd[52]: inotify_add_watch(6, /dev/mmcblk0p1, 10) failed: No such file or directory
Nov 17 05:17:16 homematic-ccu2 daemon.err udevd[58]: inotify_add_watch(6, /dev/mmcblk0p2, 10) failed: No such file or directory
Nov 17 06:08:24 homematic-ccu2 daemon.err udevd[52]: inotify_add_watch(6, /dev/sda, 10) failed: No such file or directory
Nov 17 06:08:24 homematic-ccu2 daemon.err udevd[52]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory
Nov 17 06:08:24 homematic-ccu2 daemon.err udevd[52]: inotify_add_watch(6, /dev/sda, 10) failed: No such file or directory
Nov 17 06:08:24 homematic-ccu2 daemon.err udevd[52]: inotify_add_watch(6, /dev/sda, 10) failed: No such file or directory
Nov 17 06:08:25 homematic-ccu2 daemon.info ifplugd(eth0)[236]: ifplugd 0.28 initializing.
Nov 17 06:08:25 homematic-ccu2 daemon.info ifplugd(eth0)[236]: Using interface eth0/4A:49:43:49:79:41 with driver <veth> (version: 1.0)
Nov 17 06:08:25 homematic-ccu2 daemon.info ifplugd(eth0)[236]: Using detection mode: SIOCETHTOOL
Nov 17 06:08:25 homematic-ccu2 daemon.info ifplugd(eth0)[236]: Initialization complete, link beat detected.
Nov 17 06:08:25 homematic-ccu2 daemon.warn ifplugd(eth0)[236]: Beep failure, disabled.
Nov 17 06:08:25 homematic-ccu2 daemon.info ifplugd(eth0)[236]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Nov 17 06:08:25 homematic-ccu2 daemon.warn ifplugd(eth0)[236]: client: eth0 carrier detected
Nov 17 06:08:25 homematic-ccu2 user.err : Could not read serial number
Nov 17 07:08:25 homematic-ccu2 user.debug setclock: Try to get time from 192.168.188.1
Nov 17 06:08:25 homematic-ccu2 daemon.info ifplugd(eth0)[236]: Program executed successfully.
Nov 17 07:08:25 homematic-ccu2 user.debug setclock: Thu Nov 17 07:08:25 CET 2016
Nov 17 06:08:25 homematic-ccu2 auth.info sshd[307]: Server listening on 0.0.0.0 port 22.
Nov 17 06:08:25 homematic-ccu2 auth.info sshd[307]: Server listening on :: port 22.
Nov 17 07:08:25 homematic-ccu2 daemon.info cuxd[319]: write_pid /var/run/cuxd.pid [319]
Nov 17 07:08:25 homematic-ccu2 user.info homematic: started cux-daemon
Nov 17 07:08:25 homematic-ccu2 daemon.info cuxd[319]: CUx-Daemon(1.8) on CCU(2.21.10) start PID:319
Nov 17 06:08:25 homematic-ccu2 user.info logger: Updating RF Lan Gateway Coprocessor Firmware
Nov 17 07:08:25 homematic-ccu2 daemon.info cuxd[319]: write_proxy /var/cache/cuxd_proxy.ini (127.0.0.1 8700 319 /usr/local/addons/cuxd/ 1.8)
Nov 17 06:08:25 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Nov 17 07:08:25 homematic-ccu2 daemon.info cuxd[319]: add interface 'CUxD'
Nov 17 07:08:25 homematic-ccu2 daemon.info cuxd[319]: write 4 interfaces to /usr/local/etc/config/InterfacesList.xml
Nov 17 06:08:25 homematic-ccu2 user.info logger: Updating RF Lan Gateway Firmware
Nov 17 06:08:25 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Nov 17 06:08:25 homematic-ccu2 user.info logger: Updating Wired Lan Gateway Firmware
Nov 17 06:08:25 homematic-ccu2 user.info update-lgw-firmware: LAN Gateway Firmware Update...
Nov 17 06:08:25 homematic-ccu2 user.info update-lgw-firmware: Gateway LEQ0151459
Nov 17 06:08:27 homematic-ccu2 user.info update-lgw-firmware: Gateway type is eQ3-HMW-LGW-App
Nov 17 06:08:27 homematic-ccu2 user.info update-lgw-firmware: Available Firmware Version:   1.0.5
Nov 17 06:08:27 homematic-ccu2 user.info update-lgw-firmware: Lan Gateway Firmware Version: 1.0.5
Nov 17 06:08:27 homematic-ccu2 user.info update-lgw-firmware: Firmware is up to date
Nov 17 07:08:34 homematic-ccu2 user.info kernel: [   43.688006] uart-pl011 3f201000.uart: no DMA platform data
Nov 17 07:08:46 homematic-ccu2 daemon.warn cuxd[319]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Nov 17 07:08:48 homematic-ccu2 daemon.warn cuxd[319]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Nov 17 06:08:54 homematic-ccu2 daemon.info init: starting pid 522, tty '/dev/tty1': '/sbin/getty -L tty1 115200 linux'
Nov 17 07:08:55 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Nov 17 07:08:55 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Nov 17 07:08:55 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Nov 17 07:08:55 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Nov 17 07:09:13 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 0 0x00 [1] 0 0x00 [2] 0 0x00 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 07:09:13 homematic-ccu2 daemon.info cuxd[319]: INIT 'xmlrpc_bin://127.0.0.1:1999' '16439'
Nov 17 07:09:13 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [../Platform/DOM/iseXmlRpc.h (281)]
Nov 17 07:09:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","28017"} result= nil [../Platform/DOM/iseXmlRpc.cpp (2621)]
Nov 17 07:09:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [../Platform/DOM/iseXmlRpc.cpp (1219)]
Nov 17 07:09:13 homematic-ccu2 local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=HmIP-RF [../Platform/RT/iseRTHss.cpp (163)]
Nov 17 07:09:25 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 07:09:26 homematic-ccu2 user.err rfd: HSSParameter::SetValue() false Put failed
Nov 17 07:09:26 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"KEQ0724164:4","AUTO_MODE",false} result= [faultCode:-1,faultString:"Failure"] [../Platform/DOM/iseXmlRpc.cpp (2627)]
Nov 17 07:09:26 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [../Platform/DOM/iseXmlRpc.cpp (1517)]
Nov 17 07:09:26 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = KEQ0724164:4 [../Platform/DOM/iseDOMdpHSS.cpp (77)]
Nov 17 07:11:12 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JEQ0741023:24","STATE"} result= [faultCode:-1,faultString:"Failure"] [../Platform/DOM/iseXmlRpc.cpp (2627)]
Nov 17 07:11:12 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [../Platform/DOM/iseXmlRpc.cpp (1447)]
Nov 17 07:11:12 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [../Platform/DOM/iseDOMdpHSS.cpp (130)]
Nov 17 07:11:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JEQ0741023:25","STATE"} result= [faultCode:-1,faultString:"Failure"] [../Platform/DOM/iseXmlRpc.cpp (2627)]
Nov 17 07:11:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [../Platform/DOM/iseXmlRpc.cpp (1447)]
Nov 17 07:11:13 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [../Platform/DOM/iseDOMdpHSS.cpp (130)]
Nov 17 07:11:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JEQ0741023:26","STATE"} result= [faultCode:-1,faultString:"Failure"] [../Platform/DOM/iseXmlRpc.cpp (2627)]
Nov 17 07:11:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [../Platform/DOM/iseXmlRpc.cpp (1447)]
Nov 17 07:11:13 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [../Platform/DOM/iseDOMdpHSS.cpp (130)]
Nov 17 07:12:49 homematic-ccu2 daemon.info cuxd[319]: INIT 'binary://192.168.188.13:2011' 'CUxD'
Nov 17 07:37:09 homematic-ccu2 user.err hs485d: response timeout
Nov 17 07:37:09 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 07:37:16 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 07:37:20 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 08:06:01 homematic-ccu2 user.err hs485d: response timeout
Nov 17 08:06:01 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 08:06:19 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 09:39:41 homematic-ccu2 user.err hs485d: response timeout
Nov 17 09:39:41 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 09:39:52 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 09:46:08 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 11:17:13 homematic-ccu2 user.err hs485d: response timeout
Nov 17 11:17:13 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 11:17:19 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724186:4","CONTROL_MODE",0}]}) on binary://192.168.188.13:2011/RPC2:
Nov 17 11:17:19 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 11:17:25 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 12:49:43 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 12:49:46 homematic-ccu2 user.err hs485d: response timeout
Nov 17 12:49:46 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 12:49:50 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 12:49:51 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:21","VALUE",226.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 17 12:49:51 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 17 12:49:57 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 12:49:59 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0964183:2","BOOT",true}]}) on binary://192.168.188.13:2011/RPC2:
Nov 17 12:49:59 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 12:50:11 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:17","STATE",false}]}) on binary://192.168.188.13:2011/RPC2:
Nov 17 12:50:11 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 17 12:50:19 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0964183:2","ENERGY_COUNTER",3018.600000}],[methodName:"event",params:{"BidCos-RF","KEQ0964183:2","POWER",0.000000}],[methodName:"event",params:{"BidCos-
Nov 17 12:50:19 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 12:50:39 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0000994:2","CONTROL_MODE",0}],[methodName:"event",params:{"BidCos-RF","LEQ0000994:2","LOWBAT_REPORTING",false}],[methodName:"event",params:{"BidCos-RF",
Nov 17 12:50:39 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 12:50:45 homematic-ccu2 daemon.err cuxd[319]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 17 12:50:58 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 14:56:19 homematic-ccu2 user.err hs485d: response timeout
Nov 17 14:56:19 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 14:56:30 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 15:13:26 homematic-ccu2 daemon.notice cuxd[319]: closing fd(8) (192.168.188.13:42749) idle(28837s)
Nov 17 17:30:12 homematic-ccu2 user.err hs485d: response timeout
Nov 17 17:30:12 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 17:30:24 homematic-ccu2 user.err hs485d: UnifiedLanCommController::connect(): Unable to connect.
Nov 17 17:30:38 homematic-ccu2 user.err hs485d: UnifiedLanCommController::connect(): Unable to connect.
Nov 17 17:30:40 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724164:4","CONTROL_MODE",0}]}) on binary://192.168.188.13:2011/RPC2:
Nov 17 17:30:40 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 17:30:46 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724164:4","FAULT_REPORTING",0}],[methodName:"event",params:{"BidCos-RF","KEQ0724164:4","BATTERY_STATE",2.900000}],[methodName:"event",params:{"BidCos-R
Nov 17 17:30:46 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 17:30:52 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724883:4","CONTROL_MODE",0}],[methodName:"event",params:{"BidCos-RF","KEQ0724883:4","FAULT_REPORTING",0}],[methodName:"event",params:{"BidCos-RF","KEQ0
Nov 17 17:30:52 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 17:30:55 homematic-ccu2 user.err hs485d: UnifiedLanCommController::connect(): Unable to connect.
Nov 17 17:31:03 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0000994:2","ACTUAL_TEMPERATURE",20.600000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 17 17:31:03 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 17:31:09 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0000994:2","ACTUAL_HUMIDITY",61.000000}],[methodName:"event",params:{"BidCos-RF","LEQ0000994:2","SET_TEMPERATURE",20.500000}]}) on binary://192.168.188.
Nov 17 17:31:09 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 17:31:16 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 20:30:38 homematic-ccu2 user.err hs485d: response timeout
Nov 17 20:30:38 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 20:30:47 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 20:54:27 homematic-ccu2 user.err hs485d: response timeout
Nov 17 20:54:27 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 20:54:37 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724190:4","CONTROL_MODE",0}]}) on binary://192.168.188.13:2011/RPC2:
Nov 17 20:54:37 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 17 20:54:42 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 17 21:52:56 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:01:03 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:39 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:41 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:43 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:47 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:51 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:53 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:55 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:56 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:58 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:02:59 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:00 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:02 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:08 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:12 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:13 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:15 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:16 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:18 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:19 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:21 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:03:23 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:27 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:34 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:38 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:40 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:42 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:43 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:47 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:52 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:53 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:55 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:56 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:04:57 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:05:02 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:05:05 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 145 0x91 [1] 0 0x00 [2] 102 0x66 [3] 0 0x00 [4] 0 0x00  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 17 23:09:01 homematic-ccu2 daemon.err cuxd[319]: Received SIGSEGV signal.
Nov 17 23:54:04 homematic-ccu2 user.err hs485d: response timeout
Nov 17 23:54:04 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 17 23:54:14 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 00:28:35 homematic-ccu2 user.err hs485d: response timeout
Nov 18 00:28:35 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 00:28:55 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:17","STATE",false}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 00:28:55 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 00:29:01 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 04:12:01 homematic-ccu2 cron.info crond[41]: crond: USER root pid 2814 cmd /bin/setHWClock.sh
Nov 18 04:14:01 homematic-ccu2 cron.info crond[41]: crond: USER root pid 2817 cmd /bin/SetInterfaceClock 127.0.0.1:2001
Nov 18 04:21:45 homematic-ccu2 user.err hs485d: response timeout
Nov 18 04:21:45 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 04:21:55 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:21","VALUE",213.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 04:21:55 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 04:21:56 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724160:4","CONTROL_MODE",0}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 04:21:56 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 04:22:07 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 05:43:08 homematic-ccu2 user.err hs485d: response timeout
Nov 18 05:43:08 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 05:43:19 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 06:10:40 homematic-ccu2 user.err hs485d: response timeout
Nov 18 06:10:40 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 06:10:48 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 06:57:57 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 06:58:24 homematic-ccu2 daemon.info cuxd[2877]: write_pid /var/run/cuxd.pid [2877]
Nov 18 06:58:24 homematic-ccu2 daemon.info cuxd[2877]: CUx-Daemon(1.8) on CCU(2.21.10) start PID:2877
Nov 18 06:58:24 homematic-ccu2 user.info homematic: started (restart) cux-daemon
Nov 18 06:58:24 homematic-ccu2 daemon.info cuxd[2877]: write_proxy /var/cache/cuxd_proxy.ini (127.0.0.1 8700 2877 /usr/local/addons/cuxd/ 1.8)
Nov 18 06:58:54 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 08:16:26 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 08:29:09 homematic-ccu2 user.err hs485d: response timeout
Nov 18 08:29:09 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 08:29:20 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0030141:1","TEMPERATURE",7.600000}],[methodName:"event",params:{"BidCos-RF","LEQ0030141:1","HUMIDITY",95}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 08:29:20 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 08:29:25 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:21","VALUE",211.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 08:29:25 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 08:29:40 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724157:4","CONTROL_MODE",0}],[methodName:"event",params:{"BidCos-RF","KEQ0724157:4","FAULT_REPORTING",0}],[methodName:"event",params:{"BidCos-RF","KEQ0
Nov 18 08:29:40 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 08:29:48 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 12:27:25 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 12:27:30 homematic-ccu2 user.err hs485d: response timeout
Nov 18 12:27:30 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 12:27:35 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","LEQ0147907:21","VALUE",344.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 12:27:35 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 12:27:42 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 12:33:42 homematic-ccu2 user.err hs485d: response timeout
Nov 18 12:33:42 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 12:33:54 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 12:45:35 homematic-ccu2 user.err hs485d: response timeout
Nov 18 12:45:35 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 12:45:41 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724094:4","CONTROL_MODE",0}],[methodName:"event",params:{"BidCos-RF","KEQ0724094:4","FAULT_REPORTING",1}],[methodName:"event",params:{"BidCos-RF","KEQ0
Nov 18 12:45:41 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 12:45:43 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","LEQ0147907:22","VALUE",386.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 12:45:43 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 12:45:46 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 12:55:27 homematic-ccu2 user.err hs485d: response timeout
Nov 18 12:55:27 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 12:55:35 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 12:56:56 homematic-ccu2 user.err hs485d: response timeout
Nov 18 12:56:56 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 12:57:07 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 12:58:08 homematic-ccu2 user.err hs485d: response timeout
Nov 18 12:58:08 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 12:58:22 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 15:47:13 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 16:41:25 homematic-ccu2 user.err hs485d: response timeout
Nov 18 16:41:25 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 16:41:36 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0000994:1","TEMPERATURE",20.500000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 16:41:36 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 16:41:38 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:22","VALUE",185.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 16:41:38 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 16:42:07 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 16:58:48 homematic-ccu2 user.err hs485d: response timeout
Nov 18 16:58:48 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 16:58:55 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ1041694:4","CONTROL_MODE",0}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 16:58:55 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 16:58:59 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 17:00:40 homematic-ccu2 user.err hs485d: response timeout
Nov 18 17:00:40 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 17:00:47 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 17:06:48 homematic-ccu2 user.err hs485d: response timeout
Nov 18 17:06:48 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 17:07:00 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:21","VALUE",217.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 17:07:00 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 17:07:01 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0001104:1","TEMPERATURE",20.200000}],[methodName:"event",params:{"BidCos-RF","LEQ0001104:1","HUMIDITY",66}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 17:07:01 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 17:07:21 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0724164:4","CONTROL_MODE",0}],[methodName:"event",params:{"BidCos-RF","KEQ0724164:4","FAULT_REPORTING",0}],[methodName:"event",params:{"BidCos-RF","KEQ0
Nov 18 17:07:21 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 17:07:25 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 17:07:28 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 17:21:29 homematic-ccu2 user.err hs485d: response timeout
Nov 18 17:21:29 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 17:21:31 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 17:21:38 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 17:21:46 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 17:21:47 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0000994:2","ACTUAL_TEMPERATURE",20.600000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 17:21:47 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 17:21:48 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:21","VALUE",172.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 17:21:48 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 17:22:07 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0000994:2","ACTUAL_HUMIDITY",58.000000}],[methodName:"event",params:{"BidCos-RF","LEQ0000994:2","SET_TEMPERATURE",20.500000}],[methodName:"event",params
Nov 18 17:22:07 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 17:22:42 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 17:30:03 homematic-ccu2 user.err hs485d: response timeout
Nov 18 17:30:03 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 17:30:23 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0109583:4","CONTROL_MODE",0}],[methodName:"event",params:{"BidCos-RF","LEQ0109583:4","FAULT_REPORTING",0}],[methodName:"event",params:{"BidCos-RF","LEQ0
Nov 18 17:30:23 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 17:30:27 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 18:23:29 homematic-ccu2 user.err hs485d: response timeout
Nov 18 18:23:29 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 18:23:36 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 18:51:57 homematic-ccu2 user.err hs485d: response timeout
Nov 18 18:51:57 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 18:52:01 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 18:52:13 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:21","VALUE",227.000000}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 18:52:13 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 18:52:13 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0109577:4","CONTROL_MODE",0}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 18:52:13 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 18:52:33 homematic-ccu2 user.err hs485d: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-Wired","JEQ0741023:17","STATE",false}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 18:52:33 homematic-ccu2 user.err hs485d: XmlRpc transport error
Nov 18 18:52:33 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","LEQ0109577:4","FAULT_REPORTING",0}],[methodName:"event",params:{"BidCos-RF","LEQ0109577:4","BATTERY_STATE",2.300000}],[methodName:"event",params:{"BidCos-R
Nov 18 18:52:33 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 18:52:36 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 19:33:57 homematic-ccu2 user.err hs485d: response timeout
Nov 18 19:33:57 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 19:34:08 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 21:31:10 homematic-ccu2 user.err hs485d: response timeout
Nov 18 21:31:10 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 21:31:20 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0964183:2","BOOT",true}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 21:31:20 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 21:31:25 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 21:31:29 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 21:53:50 homematic-ccu2 user.err hs485d: response timeout
Nov 18 21:53:50 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 21:53:59 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0730134:4","CONTROL_MODE",0}]}) on binary://192.168.188.13:2011/RPC2:
Nov 18 21:53:59 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 21:54:09 homematic-ccu2 user.err hs485d: UnifiedLanCommController::connect(): Unable to connect.
Nov 18 21:54:19 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","KEQ0730134:4","FAULT_REPORTING",0}],[methodName:"event",params:{"BidCos-RF","KEQ0730134:4","BATTERY_STATE",3.000000}],[methodName:"event",params:{"BidCos-R
Nov 18 21:54:19 homematic-ccu2 user.err rfd: XmlRpc transport error
Nov 18 21:54:23 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 22:05:24 homematic-ccu2 user.err hs485d: response timeout
Nov 18 22:05:24 homematic-ccu2 user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Nov 18 22:05:30 homematic-ccu2 daemon.err cuxd[2877]: sendbinrpc(192.168.188.13:2011) connect(7s) Connection timed out
Nov 18 22:05:33 homematic-ccu2 user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Nov 18 22:52:38 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 22:53:15 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 22:53:15 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 22:53:37 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 22:53:37 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 23:04:56 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 23:05:05 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 23:05:05 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 144 0x90 [1] 0 0x00 [2] 9 0x09 [3] 0 0x00 [4] 28 0x1c  [../Platform/DOM/iseESPexec.cpp (11622)]
Nov 18 23:35:44 homematic-ccu2 daemon.info cuxd[2877]: CUx-Daemon restart
Nov 18 23:35:44 homematic-ccu2 daemon.info cuxd[4729]: write_pid /var/run/cuxd.pid [4729]
Nov 18 23:35:44 homematic-ccu2 daemon.info cuxd[4729]: CUx-Daemon(1.8) on CCU(2.21.10) start PID:4729
Nov 18 23:35:44 homematic-ccu2 daemon.info cuxd[4729]: write_proxy /var/cache/cuxd_proxy.ini (127.0.0.1 8700 4729 /usr/local/addons/cuxd/ 1.8)
Nov 18 22:48:40 homematic-ccu2 auth.info sshd[5057]: Accepted password for root from 192.168.188.10 port 50023 ssh2
Nov 18 22:48:40 homematic-ccu2 auth.info sshd[5057]: subsystem request for sftp by user root
Nov 18 23:05:34 homematic-ccu2 auth.info sshd[5460]: Failed password for root from 192.168.188.10 port 50237 ssh2
Nov 18 23:05:39 homematic-ccu2 auth.info sshd[5460]: Failed password for root from 192.168.188.10 port 50237 ssh2
Nov 18 23:05:42 homematic-ccu2 auth.info sshd[5460]: Accepted password for root from 192.168.188.10 port 50237 ssh2
Nov 18 23:06:37 homematic-ccu2 auth.info sshd[5487]: Failed password for root from 192.168.188.10 port 50246 ssh2
Nov 18 23:06:43 homematic-ccu2 auth.info sshd[5487]: Failed password for root from 192.168.188.10 port 50246 ssh2
Nov 18 23:06:47 homematic-ccu2 auth.info sshd[5487]: Connection closed by 192.168.188.10 [preauth]
Nov 18 23:07:17 homematic-ccu2 auth.info sshd[307]: Received signal 15; terminating.
Nov 18 23:07:17 homematic-ccu2 auth.info sshd[5057]: Exiting on signal 15
Nov 19 00:07:17 homematic-ccu2 auth.info sshd[5527]: Server listening on 0.0.0.0 port 22.
Nov 19 00:07:17 homematic-ccu2 auth.info sshd[5527]: Server listening on :: port 22.
Nov 19 00:07:41 homematic-ccu2 auth.info sshd[5537]: Accepted password for root from 192.168.188.10 port 50260 ssh2
Nov 19 00:08:25 homematic-ccu2 auth.info sshd[5562]: Failed password for root from 192.168.188.10 port 50264 ssh2
Nov 19 00:08:32 homematic-ccu2 auth.info sshd[5562]: Accepted password for root from 192.168.188.10 port 50264 ssh2
Nov 19 00:08:32 homematic-ccu2 auth.info sshd[5562]: subsystem request for sftp by user root
Nov 19 00:09:20 homematic-ccu2 auth.info sshd[5587]: Failed password for root from 192.168.188.10 port 50271 ssh2
Nov 19 00:09:30 homematic-ccu2 auth.info sshd[5587]: Accepted password for root from 192.168.188.10 port 50271 ssh2
Nov 19 00:09:30 homematic-ccu2 auth.info sshd[5587]: subsystem request for sftp by user root

[JoDi]

Tja, Vorführeffekt, momentan benimmt sich der Timer.
Im CUx Devlog zeigt sich, dass alle Timer brav ausgeführt werden. Bei den fehlenden Zähnen im Historian steht jeweils auch ein Kommunikationsproblem mit der IP des Historian Raspi im Syslog. Scheint also, als ob der Timer von CUx zur Verfügung gestellt wird, aber zumindest den Historian nicht erreicht.
Diese Events werden dann auch jeweils nicht in YAHM ausgeführt, die angesteuerten Programme werden bei diesen Events nicht aktiv.
Wo der Zusammenhang ist zwischen unerreichbarem Historian und taubem YAHM ist mir noch unklar.
Ich beobachte das weiter und stelle ggf. Logs ein.