CCU.IO 1.0.52 empfängt keine Daten

[Herbert_Testmann]

Hallo

das Thema wurde in einem anderen Beitrag nach Erscheinen von 1.0.52 schon mal angesprochen, der ist aber inzwischen sehr lang. Deshalb hier noch mal neu.

Bei mir läuft 1.0.52 auf einem RASPI und hat Kontakt zur CCU2
Mit 1.0.51 lief alles mehr oder weniger problemlos.

Seit 1.0.52 werden nach einiger Zeit keine Daten von der CCU mehr empfangen. Ich sehe da nicht alzu oft nach, nur bei bestimmten Anlässen. Also ca. alle 4...8 Wochen.
Seit 1.0.52 habe ich dann immer das Problem, dass auf der Startseite die Zeiten bei Rega Anfrage und rf-Ereignis nicht mehr laufen. Auf der Seite Daten / Ereignisse wird nichts gelistet.

Nach einem Neustart über Steuerung / Neustart CCU.io startet CCU.io neu, dann geht die Verbindung nach ca. 30 sec noch mal verloren und dann werden Daten empfangen. Wie lange das dann funktioniert habe ich im Detail noch nicht beobachtet.

Hat noch jemand ähnliche Probleme?

Wie komme ich manuell wieder auf die Versionn 1.0.51 ?
Bei der .51 war ja die Vermutung, dass die CCU nach einiger Zeit stehen bleibt. Also auch nicht optimal

Danke für Eure Hilfe.

[Homoran]

Hallo Herbert,
mir ist im Moment nur präsent, dass es einen bug mit dem ical Adapter gibt. Dort scheinen die Dateien von cloneextend eine dateiebene zu tief zu liegen.
Dass überhaupt keine Daten mehr erfasst werden, ist mir nicht geläufig.
Rein vorsorglich:
Die IP Adressen in der Konfiguration sind korrekt?
Wenn es nach einem Neustart erst einmal läuft ist zumindest die der ccu korrekt.
Wenn nur einmalig Daten eingelesen werden, sieht das eher nach Problemen mit der IP Adresse des ccuio Servers aus.
Ggf. auch Fehler im Netzwerk?
Fritzbox (?) rebooten?

Gruß
Rainer

Gesendet von meinem LIFETAB_S785X mit Tapatalk

[Herbert_Testmann]

Hallo

nach CCU.io Neustart läuft es ja einige Tage. Dann bekommt der Raspi offenbar keine Daten mehr von der CCU geschickt oder ccu.io empfängt diese nicht.
Ich vermute, dass ein Neustart der Software dann eine Neu Registrierung des ccu.io an der CCU veranlasst. Da in dem Moment also auf beiden Seiten etwas verändert wird, kann ich schlecht fest stellen, ob die CCU keine Daten sendet, oder ccu.io keine Daten empfängt.

Parallel läuft "Historian" auf einem anderen Server und greift auf die gleiche CCU zu.
Da werden die Daten durchgehend gelogt.

[hobbyquaker]

Kannst Du mal die Logdatei /opt/ccu.io/log/ccu.io.log hier anhängen?

[Rantanplan]

Hallo

nach CCU.io Neustart läuft es ja einige Tage. Dann bekommt der Raspi offenbar keine Daten mehr von der CCU geschickt oder ccu.io empfängt diese nicht.
Ich vermute, dass ein Neustart der Software dann eine Neu Registrierung des ccu.io an der CCU veranlasst. Da in dem Moment also auf beiden Seiten etwas verändert wird, kann ich schlecht fest stellen, ob die CCU keine Daten sendet, oder ccu.io keine Daten empfängt.

Parallel läuft "Historian" auf einem anderen Server und greift auf die gleiche CCU zu.
Da werden die Daten durchgehend gelogt.

Hallo
Ich habe das gleiche Problem.
Eine Zeitlang läuft alles und dann bekommt CCU.IO Daten mehr. ("Letzte ReGa-Anfrage" bleibt leer).
Ich merke das meist, wenn die Rollos nicht rauf oder runter fahren.

Ich kann es leider nicht genau verifizieren.
Hatte mal ScriptGui/Script-Engine in Verdacht.
Nach Script-Erstellung und Neustart der Engine, kam der Fehler häufiger, aber auch nicht immer.

Grüße

[hobbyquaker]

Ich habe das gleiche Problem.

Auch auf Dein /opt/ccu.io/log/ccu.io.log kann ich gerne einen Blick werfen. Aber wenn ich weder Log noch Kristallkugel habe fällt es echt schwer irgendwas sinnvolles dazu zu sagen

[Herbert_Testmann]

Auch auf Dein /opt/ccu.io/log/ccu.io.log kann ich gerne einen Blick werfen. Aber wenn ich weder Log noch Kristallkugel habe fällt es echt schwer irgendwas sinnvolles dazu zu sagen

Bitte noch etwas Geduld. Daten kommen im Laufe der Woche ...

[Wortmann30]

Hallo zusammen

das habe ich gestern Abend auch festgestellt bei mir das mir Daten fehlen, habe es erst mal abgetan bis ich diesen tread hier gelesen habe.

Als Beispiel die Füllstandsensoren per Funk haben keine Daten mehr seit 01.06. während die wired Daten sicher da sind.

Ich werde heute Abend mir das nochmal genauer ansehen und auch meine LOG Datei zur Verfügung stellen, wenn das OK ist.

[Herbert_Testmann]

Hallo

hier in Kürze die Stellen in der Log Datei, die mir auffallen

Code: Alles auswählen

2015-06-30 16:41:08.152 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 85msg/min
2015-06-30 16:41:08.153 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 16:56:08.156 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 86msg/min
2015-06-30 16:56:08.159 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 17:11:08.162 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 89msg/min
2015-06-30 17:11:08.164 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 17:26:08.171 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 84msg/min
2015-06-30 17:26:08.174 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 17:41:08.176 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 91msg/min
2015-06-30 17:41:08.178 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 17:56:08.183 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 89msg/min
2015-06-30 17:56:08.186 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 18:11:08.190 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 89msg/min
2015-06-30 18:11:08.193 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 18:26:08.196 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 89msg/min
2015-06-30 18:26:08.199 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 18:41:08.202 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 87msg/min
2015-06-30 18:41:08.205 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 18:56:08.210 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 91msg/min
2015-06-30 18:56:08.213 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 18:59:45.394 [32minfo   [0m: ccu.io        polling service messages
2015-06-30 19:00:45.840 [32minfo   [0m: ccu.io        polling service messages
2015-06-30 19:01:46.292 [32minfo   [0m: ccu.io        polling service messages
2015-06-30 19:02:46.770 [32minfo   [0m: ccu.io        polling service messages
2015-06-30 19:04:47.854 [32minfo   [0m: ccu.io        polling service messages
2015-06-30 19:06:55.969 [31merror  [0m: rega          post request error: connect ECONNREFUSED
2015-06-30 19:11:08.216 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 115msg/min
2015-06-30 19:11:08.218 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 19:26:08.222 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 19:26:08.225 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 19:41:08.226 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 19:41:08.228 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 19:56:08.230 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 19:56:08.232 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 20:11:08.233 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 20:11:08.234 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 20:26:08.236 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 20:26:08.238 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 20:41:08.247 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 20:41:08.248 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 20:56:08.257 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 20:56:08.259 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 21:11:08.268 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 21:11:08.269 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 21:26:08.271 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 21:26:08.274 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 21:41:08.278 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-06-30 21:41:08.279 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-06-30 21:56:08.282 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min

Ab 19:26 keine eingehenden Msg mehr

-----------------------------

Hier der Neustart.
Was ist der Adapter _all3418v2
Ist das der für die daten des RasPi ?

Code: Alles auswählen

2015-07-13 05:56:13.357 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-07-13 05:56:13.358 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 06:11:13.361 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 0msg/min
2015-07-13 06:11:13.362 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 06:17:56.493 [32minfo   [0m: ccu.io        GET http://ccu.io/version.php
2015-07-13 06:18:38.981 [32minfo   [0m: ccu.io        received restart command
2015-07-13 06:18:40.224 [32minfo   [0m: ccu.io        saved datapoints
2015-07-13 06:18:41.184 [32minfo   [0m: adapter all3418v2   disconnected from ccu.io
2015-07-13 06:18:41.129 [32minfo   [0m: ccu.io        saved persistent objects
2015-07-13 06:18:41.142 [32minfo   [0m: binrpc    --> stopping init on io_rf (192.168.1.55:2001)
2015-07-13 06:18:41.144 [32minfo   [0m: socket.io --> disconnecting socket
2015-07-13 06:18:41.167 [32minfo   [0m: socket.io --> disconnecting socket
2015-07-13 06:18:41.179 [32minfo   [0m: ccu.io        closing http server
2015-07-13 06:18:41.181 [32minfo   [0m: ccu.io        killing adapter all3418v2
2015-07-13 06:18:41.191 [32minfo   [0m: ccu.io        killing adapter rpi
2015-07-13 06:18:41.217 [32minfo   [0m: adapter rpi   (Rasp1) terminating
2015-07-13 06:18:41.250 [32minfo   [0m: adapter all3418v2   terminating
2015-07-13 06:18:41.697 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:42.199 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:42.701 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:43.202 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:43.703 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:44.205 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:44.707 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:45.208 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:45.710 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:46.212 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:46.714 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:47.216 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:47.718 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:48.219 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:48.722 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:49.223 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:49.725 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:50.227 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:50.729 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:51.231 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:51.732 [32minfo   [0m: ccu.io uptime 0 Tage, 10 Stunden, 53 Minuten, 41 Sekunden
2015-07-13 06:18:51.733 [32minfo   [0m: ccu.io        terminating
2015-07-13 06:18:51.734 [32minfo   [0m: rega          waiting for pending ReGa request...
2015-07-13 06:18:54.950 [31merror  [0m: ccu.io        no settings.json found for ._all3418v2
2015-07-13 06:18:54.968 [31merror  [0m: ccu.io        no settings.json found for ._arduino
2015-07-13 06:18:54.972 [31merror  [0m: ccu.io        no settings.json found for ._bcontrol_em
2015-07-13 06:18:54.973 [31merror  [0m: ccu.io        no settings.json found for ._bcontrol_em_http
2015-07-13 06:18:54.975 [31merror  [0m: ccu.io        no settings.json found for ._cubie
2015-07-13 06:18:54.976 [31merror  [0m: ccu.io        no settings.json found for ._currency
2015-07-13 06:18:54.977 [31merror  [0m: ccu.io        no settings.json found for ._denon
2015-07-13 06:18:54.978 [31merror  [0m: ccu.io        no settings.json found for ._dream
2015-07-13 06:18:54.980 [31merror  [0m: ccu.io        no settings.json found for ._dwd
2015-07-13 06:18:54.981 [31merror  [0m: ccu.io        no settings.json found for ._email
2015-07-13 06:18:54.982 [31merror  [0m: ccu.io        no settings.json found for ._fritzBox
2015-07-13 06:18:54.984 [31merror  [0m: ccu.io        no settings.json found for ._geofency
2015-07-13 06:18:54.985 [31merror  [0m: ccu.io        no settings.json found for ._gismeteo
2015-07-13 06:18:54.986 [31merror  [0m: ccu.io        no settings.json found for ._graphite
2015-07-13 06:18:54.987 [31merror  [0m: ccu.io        no settings.json found for ._growl
2015-07-13 06:18:54.988 [31merror  [0m: ccu.io        no settings.json found for ._homepilot
2015-07-13 06:18:54.990 [31merror  [0m: ccu.io        no settings.json found for ._hue
2015-07-13 06:18:54.991 [31merror  [0m: ccu.io        no settings.json found for ._ical
2015-07-13 06:18:54.993 [31merror  [0m: ccu.io        no settings.json found for ._irtrans
2015-07-13 06:18:54.994 [31merror  [0m: ccu.io        no settings.json found for ._lcdproc
2015-07-13 06:18:54.995 [31merror  [0m: ccu.io        no settings.json found for ._lgtv
2015-07-13 06:18:54.997 [31merror  [0m: ccu.io        no settings.json found for ._lirc
2015-07-13 06:18:54.998 [31merror  [0m: ccu.io        no settings.json found for ._listen
2015-07-13 06:18:54.999 [31merror  [0m: ccu.io        no settings.json found for ._megaD
2015-07-13 06:18:55.000 [31merror  [0m: ccu.io        no settings.json found for ._mqtt
2015-07-13 06:18:55.002 [31merror  [0m: ccu.io        no settings.json found for ._muell_stuttgart
2015-07-13 06:18:55.003 [31merror  [0m: ccu.io        no settings.json found for ._mysql
2015-07-13 06:18:55.004 [31merror  [0m: ccu.io        no settings.json found for ._netalarm
2015-07-13 06:18:55.006 [31merror  [0m: ccu.io        no settings.json found for ._onkyo
2015-07-13 06:18:55.007 [31merror  [0m: ccu.io        no settings.json found for ._owfs
2015-07-13 06:18:55.008 [31merror  [0m: ccu.io        no settings.json found for ._owm
2015-07-13 06:18:55.009 [31merror  [0m: ccu.io        no settings.json found for ._ping
2015-07-13 06:18:55.011 [31merror  [0m: ccu.io        no settings.json found for ._prowl
2015-07-13 06:18:55.012 [31merror  [0m: ccu.io        no settings.json found for ._pushover
2015-07-13 06:18:55.013 [31merror  [0m: ccu.io        no settings.json found for ._rego
2015-07-13 06:18:55.015 [31merror  [0m: ccu.io        no settings.json found for ._roomba
2015-07-13 06:18:55.016 [31merror  [0m: ccu.io        no settings.json found for ._rpi
2015-07-13 06:18:55.017 [31merror  [0m: ccu.io        no settings.json found for ._sayit
2015-07-13 06:18:55.018 [31merror  [0m: ccu.io        no settings.json found for ._sonos
2015-07-13 06:18:55.020 [31merror  [0m: ccu.io        no settings.json found for ._speedport
2015-07-13 06:18:55.021 [31merror  [0m: ccu.io        no settings.json found for ._sun_and_time
2015-07-13 06:18:55.022 [31merror  [0m: ccu.io        no settings.json found for ._surveillance
2015-07-13 06:18:55.024 [31merror  [0m: ccu.io        no settings.json found for ._telnet
2015-07-13 06:18:55.025 [31merror  [0m: ccu.io        no settings.json found for ._textCommands
2015-07-13 06:18:55.026 [31merror  [0m: ccu.io        no settings.json found for ._yamaha
2015-07-13 06:18:55.027 [31merror  [0m: ccu.io        no settings.json found for ._yr
2015-07-13 06:18:58.110 [32minfo   [0m: ccu.io        starting version 1.0.52 copyright (c) 2013, 2014 hobbyquaker http://hobbyquaker.github.io
2015-07-13 06:18:58.124 [32minfo   [0m: ccu.io        loaded persistent objects
2015-07-13 06:18:58.127 [32minfo   [0m: ccu.io        loaded datapoints
2015-07-13 06:18:58.357 [32minfo   [0m: webserver     listening on port 8080
2015-07-13 06:18:59.080 [32minfo   [0m: rega          ReGaHSS up
2015-07-13 06:19:01.383 [32minfo   [0m: ccu.io        loaded translate.lang.js
2015-07-13 06:19:01.492 [32minfo   [0m: ccu.io        loaded translate.lang.stringtable.js
2015-07-13 06:19:01.865 [32minfo   [0m: ccu.io        stringtable loaded
2015-07-13 06:19:01.944 [32minfo   [0m: rega          fetching favorites
2015-07-13 06:19:02.009 [32minfo   [0m: ccu.io        indexing favorites
2015-07-13 06:19:02.012 [32minfo   [0m: rega          fetching variables
2015-07-13 06:19:02.170 [32minfo   [0m: ccu.io        indexing variables
2015-07-13 06:19:02.181 [32minfo   [0m: rega          fetching programs
2015-07-13 06:19:02.287 [32minfo   [0m: ccu.io        indexing programs
2015-07-13 06:19:02.297 [32minfo   [0m: rega          fetching rooms
2015-07-13 06:19:02.349 [32minfo   [0m: ccu.io        indexing rooms
2015-07-13 06:19:02.352 [32minfo   [0m: rega          fetching functions
2015-07-13 06:19:02.424 [32minfo   [0m: ccu.io        indexing functions
2015-07-13 06:19:02.426 [32minfo   [0m: rega          fetching devices
2015-07-13 06:19:04.035 [32minfo   [0m: ccu.io        indexing devices
2015-07-13 06:19:04.053 [32minfo   [0m: rega          fetching channels
2015-07-13 06:19:07.622 [32minfo   [0m: ccu.io        indexing channels
2015-07-13 06:19:07.776 [32minfo   [0m: rega          fetching datapoints
2015-07-13 06:19:25.930 [32minfo   [0m: ccu.io        indexing datapoints
2015-07-13 06:19:26.643 [32minfo   [0m: rega          fetching alarms
2015-07-13 06:19:28.352 [32minfo   [0m: ccu.io        indexing alarms
2015-07-13 06:19:28.555 [32minfo   [0m: rega          data succesfully loaded
2015-07-13 06:19:28.561 [32minfo   [0m: binrpc        binrpc starting
2015-07-13 06:19:28.576 [32minfo   [0m: binrpc        server listening on port 2101
2015-07-13 06:19:28.576 [32minfo   [0m: binrpc    --> init io_rf
2015-07-13 06:19:28.689 [33mwarn   [0m: binrpc    <-- method listDevices undefined
2015-07-13 06:19:28.768 [32minfo   [0m: ccu.io        polling service messages
2015-07-13 06:19:30.965 [32minfo   [0m: binrpc    <-- init on 192.168.1.55:2001 successful
2015-07-13 06:19:58.241 [33mwarn   [0m: binrpc    <-- method newDevices undefined
2015-07-13 06:20:13.561 [32minfo   [0m: ccu.io        starting adapter /opt/ccu.io/adapter/all3418v2/all3418v2.js
2015-07-13 06:20:14.598 [31merror  [0m: ccu.io        no settings.json found for ._all3418v2
2015-07-13 06:20:14.614 [31merror  [0m: ccu.io        no settings.json found for ._arduino
2015-07-13 06:20:14.618 [31merror  [0m: ccu.io        no settings.json found for ._bcontrol_em
2015-07-13 06:20:14.620 [31merror  [0m: ccu.io        no settings.json found for ._bcontrol_em_http
2015-07-13 06:20:14.621 [31merror  [0m: ccu.io        no settings.json found for ._cubie
2015-07-13 06:20:14.622 [31merror  [0m: ccu.io        no settings.json found for ._currency
2015-07-13 06:20:14.624 [31merror  [0m: ccu.io        no settings.json found for ._denon
2015-07-13 06:20:14.625 [31merror  [0m: ccu.io        no settings.json found for ._dream
2015-07-13 06:20:14.626 [31merror  [0m: ccu.io        no settings.json found for ._dwd
2015-07-13 06:20:14.627 [31merror  [0m: ccu.io        no settings.json found for ._email
2015-07-13 06:20:14.628 [31merror  [0m: ccu.io        no settings.json found for ._fritzBox
2015-07-13 06:20:14.630 [31merror  [0m: ccu.io        no settings.json found for ._geofency
2015-07-13 06:20:14.631 [31merror  [0m: ccu.io        no settings.json found for ._gismeteo
2015-07-13 06:20:14.632 [31merror  [0m: ccu.io        no settings.json found for ._graphite
2015-07-13 06:20:14.633 [31merror  [0m: ccu.io        no settings.json found for ._growl
2015-07-13 06:20:14.635 [31merror  [0m: ccu.io        no settings.json found for ._homepilot
2015-07-13 06:20:14.636 [31merror  [0m: ccu.io        no settings.json found for ._hue
2015-07-13 06:20:14.637 [31merror  [0m: ccu.io        no settings.json found for ._ical
2015-07-13 06:20:14.638 [31merror  [0m: ccu.io        no settings.json found for ._irtrans
2015-07-13 06:20:14.639 [31merror  [0m: ccu.io        no settings.json found for ._lcdproc
2015-07-13 06:20:14.641 [31merror  [0m: ccu.io        no settings.json found for ._lgtv
2015-07-13 06:20:14.642 [31merror  [0m: ccu.io        no settings.json found for ._lirc
2015-07-13 06:20:14.643 [31merror  [0m: ccu.io        no settings.json found for ._listen
2015-07-13 06:20:14.644 [31merror  [0m: ccu.io        no settings.json found for ._megaD
2015-07-13 06:20:14.646 [31merror  [0m: ccu.io        no settings.json found for ._mqtt
2015-07-13 06:20:14.647 [31merror  [0m: ccu.io        no settings.json found for ._muell_stuttgart
2015-07-13 06:20:14.648 [31merror  [0m: ccu.io        no settings.json found for ._mysql
2015-07-13 06:20:14.649 [31merror  [0m: ccu.io        no settings.json found for ._netalarm
2015-07-13 06:20:14.650 [31merror  [0m: ccu.io        no settings.json found for ._onkyo
2015-07-13 06:20:14.652 [31merror  [0m: ccu.io        no settings.json found for ._owfs
2015-07-13 06:20:14.653 [31merror  [0m: ccu.io        no settings.json found for ._owm
2015-07-13 06:20:14.654 [31merror  [0m: ccu.io        no settings.json found for ._ping
2015-07-13 06:20:14.655 [31merror  [0m: ccu.io        no settings.json found for ._prowl
2015-07-13 06:20:14.657 [31merror  [0m: ccu.io        no settings.json found for ._pushover
2015-07-13 06:20:14.658 [31merror  [0m: ccu.io        no settings.json found for ._rego
2015-07-13 06:20:14.659 [31merror  [0m: ccu.io        no settings.json found for ._roomba
2015-07-13 06:20:14.660 [31merror  [0m: ccu.io        no settings.json found for ._rpi
2015-07-13 06:20:14.661 [31merror  [0m: ccu.io        no settings.json found for ._sayit
2015-07-13 06:20:14.663 [31merror  [0m: ccu.io        no settings.json found for ._sonos
2015-07-13 06:20:14.664 [31merror  [0m: ccu.io        no settings.json found for ._speedport
2015-07-13 06:20:14.665 [31merror  [0m: ccu.io        no settings.json found for ._sun_and_time
2015-07-13 06:20:14.666 [31merror  [0m: ccu.io        no settings.json found for ._surveillance
2015-07-13 06:20:14.667 [31merror  [0m: ccu.io        no settings.json found for ._telnet
2015-07-13 06:20:14.669 [31merror  [0m: ccu.io        no settings.json found for ._textCommands
2015-07-13 06:20:14.670 [31merror  [0m: ccu.io        no settings.json found for ._yamaha
2015-07-13 06:20:14.671 [31merror  [0m: ccu.io        no settings.json found for ._yr
2015-07-13 06:20:15.416 [32minfo   [0m: adapter all3418v2   ftp server listening on 0.0.0.0:2122
2015-07-13 06:20:15.917 [32minfo   [0m: adapter all3418v2   connected to ccu.io
2015-07-13 06:20:16.559 [32minfo   [0m: ccu.io        starting adapter /opt/ccu.io/adapter/rpi/rpi.js
2015-07-13 06:20:17.238 [32minfo   [0m: adapter all3418v2   fetched metaObjects from ccu.io
2015-07-13 06:20:18.124 [32minfo   [0m: adapter all3418v2   fetched metaIndex from ccu.io
2015-07-13 06:20:18.184 [31merror  [0m: ccu.io        no settings.json found for ._all3418v2
2015-07-13 06:20:18.200 [31merror  [0m: ccu.io        no settings.json found for ._arduino
2015-07-13 06:20:18.204 [31merror  [0m: ccu.io        no settings.json found for ._bcontrol_em
2015-07-13 06:20:18.205 [31merror  [0m: ccu.io        no settings.json found for ._bcontrol_em_http
2015-07-13 06:20:18.206 [31merror  [0m: ccu.io        no settings.json found for ._cubie
2015-07-13 06:20:18.207 [31merror  [0m: ccu.io        no settings.json found for ._currency
2015-07-13 06:20:18.209 [31merror  [0m: ccu.io        no settings.json found for ._denon
2015-07-13 06:20:18.210 [31merror  [0m: ccu.io        no settings.json found for ._dream
2015-07-13 06:20:18.211 [31merror  [0m: ccu.io        no settings.json found for ._dwd
2015-07-13 06:20:18.212 [31merror  [0m: ccu.io        no settings.json found for ._email
2015-07-13 06:20:18.214 [31merror  [0m: ccu.io        no settings.json found for ._fritzBox
2015-07-13 06:20:18.215 [31merror  [0m: ccu.io        no settings.json found for ._geofency
2015-07-13 06:20:18.216 [31merror  [0m: ccu.io        no settings.json found for ._gismeteo
2015-07-13 06:20:18.217 [31merror  [0m: ccu.io        no settings.json found for ._graphite
2015-07-13 06:20:18.218 [31merror  [0m: ccu.io        no settings.json found for ._growl
2015-07-13 06:20:18.219 [31merror  [0m: ccu.io        no settings.json found for ._homepilot
2015-07-13 06:20:18.220 [31merror  [0m: ccu.io        no settings.json found for ._hue
2015-07-13 06:20:18.222 [31merror  [0m: ccu.io        no settings.json found for ._ical
2015-07-13 06:20:18.223 [31merror  [0m: ccu.io        no settings.json found for ._irtrans
2015-07-13 06:20:18.225 [31merror  [0m: ccu.io        no settings.json found for ._lcdproc
2015-07-13 06:20:18.226 [31merror  [0m: ccu.io        no settings.json found for ._lgtv
2015-07-13 06:20:18.227 [31merror  [0m: ccu.io        no settings.json found for ._lirc
2015-07-13 06:20:18.228 [31merror  [0m: ccu.io        no settings.json found for ._listen
2015-07-13 06:20:18.230 [31merror  [0m: ccu.io        no settings.json found for ._megaD
2015-07-13 06:20:18.245 [31merror  [0m: ccu.io        no settings.json found for ._mqtt
2015-07-13 06:20:18.246 [31merror  [0m: ccu.io        no settings.json found for ._muell_stuttgart
2015-07-13 06:20:18.247 [31merror  [0m: ccu.io        no settings.json found for ._mysql
2015-07-13 06:20:18.248 [31merror  [0m: ccu.io        no settings.json found for ._netalarm
2015-07-13 06:20:18.249 [31merror  [0m: ccu.io        no settings.json found for ._onkyo
2015-07-13 06:20:18.250 [31merror  [0m: ccu.io        no settings.json found for ._owfs
2015-07-13 06:20:18.252 [31merror  [0m: ccu.io        no settings.json found for ._owm
2015-07-13 06:20:18.254 [31merror  [0m: ccu.io        no settings.json found for ._ping
2015-07-13 06:20:18.255 [31merror  [0m: ccu.io        no settings.json found for ._prowl
2015-07-13 06:20:18.256 [31merror  [0m: ccu.io        no settings.json found for ._pushover
2015-07-13 06:20:18.257 [31merror  [0m: ccu.io        no settings.json found for ._rego
2015-07-13 06:20:18.258 [31merror  [0m: ccu.io        no settings.json found for ._roomba
2015-07-13 06:20:18.259 [31merror  [0m: ccu.io        no settings.json found for ._rpi
2015-07-13 06:20:18.261 [31merror  [0m: ccu.io        no settings.json found for ._sayit
2015-07-13 06:20:18.262 [31merror  [0m: ccu.io        no settings.json found for ._sonos
2015-07-13 06:20:18.263 [31merror  [0m: ccu.io        no settings.json found for ._speedport
2015-07-13 06:20:18.264 [31merror  [0m: ccu.io        no settings.json found for ._sun_and_time
2015-07-13 06:20:18.265 [31merror  [0m: ccu.io        no settings.json found for ._surveillance
2015-07-13 06:20:18.267 [31merror  [0m: ccu.io        no settings.json found for ._telnet
2015-07-13 06:20:18.268 [31merror  [0m: ccu.io        no settings.json found for ._textCommands
2015-07-13 06:20:18.269 [31merror  [0m: ccu.io        no settings.json found for ._yamaha
2015-07-13 06:20:18.270 [31merror  [0m: ccu.io        no settings.json found for ._yr
2015-07-13 06:20:19.985 [32minfo   [0m: adapter rpi   (Rasp1) connected to ccu.io
2015-07-13 06:33:58.514 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 87msg/min
2015-07-13 06:33:58.516 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 06:48:58.519 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 96msg/min
2015-07-13 06:48:58.520 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 07:03:58.526 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 85msg/min
2015-07-13 07:03:58.529 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 07:18:58.536 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 88msg/min
2015-07-13 07:18:58.538 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 07:33:58.540 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 89msg/min
2015-07-13 07:33:58.542 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 07:48:58.545 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 87msg/min
2015-07-13 07:48:58.547 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 08:03:58.547 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 88msg/min
2015-07-13 08:03:58.549 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 08:18:58.551 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 88msg/min
2015-07-13 08:18:58.553 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 08:33:58.555 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 100msg/min
2015-07-13 08:33:58.556 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 08:48:58.562 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 93msg/min
2015-07-13 08:48:58.565 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 09:03:58.568 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 92msg/min
2015-07-13 09:03:58.571 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 09:18:58.574 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 92msg/min
2015-07-13 09:18:58.576 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 09:33:58.581 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 88msg/min
2015-07-13 09:33:58.583 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 09:42:01.152 [32minfo   [0m: ccu.io        polling service messages
2015-07-13 09:47:03.449 [32minfo   [0m: ccu.io        polling service messages
2015-07-13 09:48:58.585 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 94msg/min
2015-07-13 09:48:58.587 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 10:03:58.588 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 93msg/min
2015-07-13 10:03:58.590 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 10:18:58.592 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 84msg/min
2015-07-13 10:18:58.595 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 10:33:58.606 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 91msg/min
2015-07-13 10:33:58.608 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 10:48:58.611 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 89msg/min
2015-07-13 10:48:58.613 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 11:03:58.619 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 88msg/min
2015-07-13 11:03:58.622 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 11:18:58.625 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 86msg/min
2015-07-13 11:18:58.627 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 11:33:58.630 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 93msg/min
2015-07-13 11:33:58.633 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 11:48:58.635 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 95msg/min
2015-07-13 11:48:58.638 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 12:03:58.641 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 86msg/min
2015-07-13 12:03:58.644 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 12:18:58.644 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 88msg/min
2015-07-13 12:18:58.647 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 12:33:58.647 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 97msg/min
2015-07-13 12:33:58.649 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 12:48:58.651 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 89msg/min
2015-07-13 12:48:58.654 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 13:03:58.658 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 85msg/min
2015-07-13 13:03:58.660 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 13:18:58.661 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 96msg/min
2015-07-13 13:18:58.664 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 13:33:58.669 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 88msg/min
2015-07-13 13:33:58.672 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 13:48:58.673 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 88msg/min
2015-07-13 13:48:58.675 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 14:03:58.676 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 87msg/min
2015-07-13 14:03:58.678 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 14:18:58.678 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 90msg/min
2015-07-13 14:18:58.680 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-13 14:23:09.573 [32minfo   [0m: ccu.io        polling service messages
2015-07-13 14:28:11.912 [32minfo   [0m: ccu.io        polling service messages
2015-07-13 14:33:58.681 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 97msg/min

Und dieses "binrpc <-- method updateDevice undefined" habe ich auch

Code: Alles auswählen

2015-07-15 17:34:00.351 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 92msg/min
2015-07-15 17:34:00.354 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-15 17:49:00.361 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 94msg/min
2015-07-15 17:49:00.364 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-15 17:50:37.029 [33mwarn   [0m: binrpc    <-- method updateDevice undefined
2015-07-15 17:50:44.454 [32minfo   [0m: ccu.io        polling service messages
2015-07-15 17:51:44.889 [33mwarn   [0m: binrpc    <-- method updateDevice undefined
2015-07-15 17:51:54.940 [33mwarn   [0m: binrpc    <-- method updateDevice undefined
2015-07-15 17:53:46.082 [32minfo   [0m: ccu.io        polling service messages
2015-07-15 18:04:00.370 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 89msg/min
2015-07-15 18:04:00.373 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected
2015-07-15 18:19:00.377 [32minfo   [0m: ccu.io stats  cuxd: 0msg/min, wired: 0msg/min, rf: 87msg/min
2015-07-15 18:19:00.378 [32minfo   [0m: ccu.io stats  2 Socket.IO Clients connected

[Herbert_Testmann]

Das gesamte log File

ccu.io.zip

(949.46 KiB) 50-mal heruntergeladen