in meinem unendlichen glauben das alles gut ist habe ich es gewagt bei YAHM und der CCU2 Firmware und Raspberry PI updates einzuspielen na ja und das wars denn auch wieder.
reste von der ausgabe
Code: Alles auswählen
Downloading CCU Firmware
Extracting firmware
Extract ubi image
Writing to: /var/lib/lxc/yahm/root
Cleanup CCU2 source
Applying patch
Applying scripts
Creating SD card
Clean Up
Creating lxc config file
Container version 2.31.25 is created, please use 'yahm-ctl -n yahm start' to start and 'yahm-ctl -n yahm join' for console access
For network configuration see yahm-network script
Restoring old LXC config
Trying to restore old CCU2 backup, calling 'yahm-backup data_restore'
Clean up TMP directory
Extracting CCU2 backup
WARNING: /usr/local folder with all settings inside yahm container will be removed. You have 5 seconds to cancel this operation...
... to late ;)
Extracting Backup Data
STATUS: Backup version 2.31.23 was successfully restored into yahm container version 2.31.25
Please start yahm container with 'sudo yahm-ctl -n yahm start' manually
Starting yahm LXC container
root@jarvis01:/home/pi# apt update && apt dist-upgrade
Get:1 http://archive.raspberrypi.org/debian stretch InRelease [25.3 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian stretch InRelease [15.0 kB]
Hit:3 https://deb.nodesource.com/node_9.x stretch InRelease
Get:4 http://archive.raspberrypi.org/debian stretch/main armhf Packages [139 kB]
Fetched 180 kB in 2s (62.9 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
1 package can be upgraded. Run 'apt list --upgradable' to see it.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
pi-bluetooth
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 3,782 B of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://archive.raspberrypi.org/debian stretch/main armhf pi-bluetooth all 0.1.7 [3,782 B]
Fetched 3,782 B in 0s (21.1 kB/s)
Reading changelogs... Done
(Reading database ... 41245 files and directories currently installed.)
Preparing to unpack .../pi-bluetooth_0.1.7_all.deb ...
Unpacking pi-bluetooth (0.1.7) over (0.1.6) ...
Setting up pi-bluetooth (0.1.7) ...
root@jarvis01:/home/pi# ping jarvis-ccu2
PING jarvis-ccu2.fritz.box (192.168.178.84) 56(84) bytes of data.
From jarvis01.fritz.box (192.168.178.83) icmp_seq=1 Destination Host Unreachable
From jarvis01.fritz.box (192.168.178.83) icmp_seq=2 Destination Host Unreachable
From jarvis01.fritz.box (192.168.178.83) icmp_seq=3 Destination Host Unreachable
From jarvis01.fritz.box (192.168.178.83) icmp_seq=4 Destination Host Unreachable
From jarvis01.fritz.box (192.168.178.83) icmp_seq=5 Destination Host Unreachable
From jarvis01.fritz.box (192.168.178.83) icmp_seq=6 Destination Host Unreachable
^C
--- jarvis-ccu2.fritz.box ping statistics ---
7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6212ms
Code: Alles auswählen
root@jarvis01:/var/lib/lxc/yahm/root/usr/local/etc# yahm-ctl -v start
Starting yahm LXC container in debug mode
lxc-start: tools/lxc_start.c: main: 366 The container failed to start.
lxc-start: tools/lxc_start.c: main: 368 To get more details, run the container in foreground mode.
lxc-start: tools/lxc_start.c: main: 370 Additional information can be obtained by setting the --logfile and --logpriority options.
root@jarvis01:/var/lib/lxc/yahm/root/usr/local/etc#
Code: Alles auswählen
root@jarvis01:/var/run# yahm-ctl join
yahm container is stopped, please start it first
root@jarvis01:/var/run# yahm-ctl stop
yahm container is already stopped
root@jarvis01:/var/run# yahm-ctl stop
yahm container is already stopped
root@jarvis01:/var/run# yahm-ctl start
Starting yahm LXC container
root@jarvis01:/var/run# yahm-ctl join
yahm container is stopped, please start it first
root@jarvis01:/var/run# yahm-ctl info
YAHM Version: 1.9
CCU2 Version: 2.31.25
LXC container information
Name: yahm
State: STOPPED
root@jarvis01:/var/run#
/dev/raw-uart ist vorhanden.
Code: Alles auswählen
root@jarvis01:/var/run# lsmod
Module Size Used by
cmac 3239 1
bnep 12051 2
hci_uart 20020 1
btbcm 7916 1 hci_uart
bluetooth 365780 24 hci_uart,bnep,btbcm
fuse 99603 3
iptable_filter 2197 0
bridge 108705 0
stp 2430 1 bridge
llc 5903 2 bridge,stp
brcmfmac 292632 0
brcmutil 9863 1 brcmfmac
cfg80211 544545 1 brcmfmac
rfkill 20851 4 bluetooth,cfg80211
snd_bcm2835 24427 0
snd_pcm 98501 1 snd_bcm2835
snd_timer 23968 1 snd_pcm
snd 70032 3 snd_timer,snd_bcm2835,snd_pcm
bcm2835_gpiomem 3940 0
pl011_raw_uart 4584 0
generic_raw_uart 10230 1 pl011_raw_uart
fixed 3285 0
uio_pdrv_genirq 3923 0
uio 10204 1 uio_pdrv_genirq
plat_eq3ccu2 1819 0
eq3_char_loop 9744 0
ip_tables 13161 1 iptable_filter
x_tables 20578 2 ip_tables,iptable_filter
ipv6 408900 25 bridge
Code: Alles auswählen
root@jarvis01:/boot# lxc-start -n yahm -F
sh: 1: /var/lib/yahm/pre-start.sh: not found
lxc-start: conf.c: run_buffer: 405 Script exited with status 127.
lxc-start: start.c: lxc_init: 450 Failed to run lxc.hook.pre-start for container "yahm".
lxc-start: start.c: __lxc_start: 1302 Failed to initialize container "yahm".
lxc-start: tools/lxc_start.c: main: 366 The container failed to start.
lxc-start: tools/lxc_start.c: main: 370 Additional information can be obtained by setting the --logfile and --logpriority options.
root@jarvis01:/boot# cd /root/
root@jarvis01:~# lxc-start -n yahm -F --logfile log
sh: 1: /var/lib/yahm/pre-start.sh: not found
lxc-start: conf.c: run_buffer: 405 Script exited with status 127.
lxc-start: start.c: lxc_init: 450 Failed to run lxc.hook.pre-start for container "yahm".
lxc-start: start.c: __lxc_start: 1302 Failed to initialize container "yahm".
lxc-start: tools/lxc_start.c: main: 366 The container failed to start.
lxc-start: tools/lxc_start.c: main: 370 Additional information can be obtained by setting the --logfile and --logpriority options.
root@jarvis01:~#
Weiß nicht weiter was kann ich noch machen ? :'-(
grüße
Alex