HmIP-RF not running

Einrichtung, Anschluss und Programmierung der HomeMatic CCU

Moderator: Co-Administratoren

dabu1794
Beiträge: 20
Registriert: 16.08.2017, 11:45
Wohnort: Oldenburg

HmIP-RF not running

Beitrag von dabu1794 » 16.08.2017, 12:08

Moin zusammen,

ich habe schon einiges hier im Forum gelesen und oft einige hilfreiche Anregungen erhalten und möchte mich daher nun auch hier beteiligen.

Nach einiger Einarbeitungszeit bin ich aber nun an einem Problem angelagt bei dem ich nicht weiterkomme. Zu diesem Thema habe ich an der einen oder anderen Stelle (auch hier im Forum) schon etwas gefunden. Eine abschließende Lösung hat sich dadurch aber nicht ergeben. Daher möchte ich dies als neues Thema diskutuieren. Vielelicht aben auch andere diesen Problem.

Fehlerbeschreibung:
Nach dem Neustart der CCU2 besteht bereits zum zweiten mal das Problem, dass die CCU2 sehr langsam reagiert und auch eine Kommunikation mit den Sensoren und Aktoren nur bedingt möglich ist. Nach dem ersten Auftreten des Problems brachte ein Reset mit anschließendem neuaufspielen der aktuellen Firmware sowie anschließendem Rückspielen des Backups Abhilfe. Dies habe ich dieses mach auch wieder probiert, leider ohne nennenswerten Erfolg.
RaspberryMatic 3.43.15.20190223 | ~95 HM-IP Geräte | Integration Rademacher Homepilot | Integration Yamaha Musiccast

dabu1794
Beiträge: 20
Registriert: 16.08.2017, 11:45
Wohnort: Oldenburg

Re: HmIP-RF not running

Beitrag von dabu1794 » 16.08.2017, 12:10

Zu dem Problem im Detail:
• WebUI reagiert sehr langsam
• Bei der Konfiguration von Geräten werden Parameter zum Teil nicht angezeigt.
• Nach einem neuen Aufspielen der Firmware und des Backups, treten die Probleme nach einiger Zeit (maximal 2-3h) wieder auf.
• Der Zustand der Sensoren und Aktoren wird nicht zurückgemeldet. Das Schalten von Aktoren über die WebUI ist mit Verzögerung möglich.
• Zentralprogramme werden nur verzögert oder nicht ausgeführt.
• Nach Auftreten des Problems wurde der Cux-Deamon installiert um den DutyCycle per Skript auszulesen, eine Auslastung von mehr als 40% wurde nicht angezeigt.
• Gelegentlich wird die Fehlermeldung "HMIP-RF - Eine Komponente der Zentrale reagiert nicht mehr" angezeigt. Dies tritt auch auf nachdem die CCU2 in den Werkszustand zurückgesetzt und die Firmware neu aufgespielt wurde.
• Auf der HomeMatic Configurationswebseite die mittels (http://192.168.56.210/tools/devconfig.c ... GcmfELCh4J@) aufgerufen wurde, wird zudem bei Service Messages angezeigt: HmIP-RF not running.

Zu den Rahmenbedingungen:
• Aktuelle Firmware von der eq3 Homepage wird verwendet. (wurde mehrfach heruntergeladen um Übertragungsfehler auszuschließen)
• Vor dem Neustart der CCU2 hat das System störungsfrei funktioniert.
• Es werden ausschließlich Homematic IP Sensoren und Aktoren eingesetzt
• Anzahl der Sensoren/Aktoren größer 70 Stück
• Nutzung vorwiegend direkter Verknüpfungen inkl. virtueller Kanäle um die CCU2 nicht mit Zentralprogrammen zu belasten.
• Alle Programme wurden nach aufspielen des Backups deaktiviert um Fehler in diesen auszuschließen
• Die Speicherkarte wurde aus der CCU2 entfernt
• Keine weiteren Plugins installiert. (Cux-Deamon nach dem Test mit DutyCycle wieder entfernt und CCU2 komplett neu mit der Firmware bespielt)
RaspberryMatic 3.43.15.20190223 | ~95 HM-IP Geräte | Integration Rademacher Homepilot | Integration Yamaha Musiccast

dabu1794
Beiträge: 20
Registriert: 16.08.2017, 11:45
Wohnort: Oldenburg

Re: HmIP-RF not running

Beitrag von dabu1794 » 16.08.2017, 12:13

Hier auch ein Screenshot der Fehlermeldung in der WebUI
Dateianhänge
Fehler HMIP-RF.JPG
RaspberryMatic 3.43.15.20190223 | ~95 HM-IP Geräte | Integration Rademacher Homepilot | Integration Yamaha Musiccast

dabu1794
Beiträge: 20
Registriert: 16.08.2017, 11:45
Wohnort: Oldenburg

Re: HmIP-RF not running

Beitrag von dabu1794 » 16.08.2017, 12:14

Der Fehlerlog enthält folgendes:

Code: Alles auswählen

Aug 15 21:26:35 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2017-07-17 14:07:03 CEST)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] Booting Linux on physical CPU 0
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] Initializing cgroup subsys cpu
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000] Linux version 3.4.11.ccu2 (hudson@entw-build-10) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #1 PREEMPT Mon Jul 17 14:36:42 CEST 2017
Aug 15 21:26:35 homematic-ccu2 user.warn kernel: [    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Aug 15 21:26:35 homematic-ccu2 user.warn kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Aug 15 21:26:35 homematic-ccu2 user.warn kernel: [    0.000000] Machine: eQ-3 HomeMatic CCU2
Aug 15 21:26:35 homematic-ccu2 user.warn kernel: [    0.000000] Memory policy: ECC disabled, Data cache writeback
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    0.000000] On node 0 totalpages: 65536
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat c03c42ec, node_mem_map c03f8000
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    0.000000]   Normal zone: 512 pages used for memmap
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    0.000000]   Normal zone: 65024 pages, LIFO batch:15
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Aug 15 21:26:35 homematic-ccu2 user.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000] Kernel command line: eQ3Mode=production console=ttyAMA0,115200 ubi.mtd=7 ubi.mtd=6 ro ip=none root=ubi0:root ubi.mtd=7 rootfstype=ubifs noinitrd mtdparts=gpmi-nand:1024k(fcb)ro,1024k(bbt),1024k(bootenv),1536k(boo
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] allocated 524288 bytes of page_cgroup
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] Memory: 256MB = 256MB total
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000] Memory: 255276k/255276k available, 6868k reserved, 0K highmem
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000] Virtual kernel memory layout:
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]       .text : 0xc0008000 - 0xc037d000   (3540 kB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]       .init : 0xc037d000 - 0xc039a000   ( 116 kB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]       .data : 0xc039a000 - 0xc03c4a20   ( 171 kB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.000000]        .bss : 0xc03c4a44 - 0xc03f77dc   ( 204 kB)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] NR_IRQS:304
Aug 15 21:26:35 homematic-ccu2 user.err kernel: [    0.000000] saif0_clk_set_rate: clock is gated
Aug 15 21:26:35 homematic-ccu2 user.err kernel: [    0.000000] saif1_clk_set_rate: clock is gated
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] Console: colour dummy device 80x30
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.000000] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] pid_max: default: 32768 minimum: 301
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] Mount-cache hash table entries: 512
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] Initializing cgroup subsys cpuacct
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] Initializing cgroup subsys memory
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] Initializing cgroup subsys devices
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] Initializing cgroup subsys freezer
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] CPU: Testing write buffer coherency: ok
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] Setting up static identity map for 0x402b1198 - 0x402b11f0
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.070000] devtmpfs: initialized
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.080000] dummy: 
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.080000] NET: Registered protocol family 16
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.080000] gpiochip_add: registered GPIOs 0 to 31 on device: gpio-mxs.0
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.080000] gpiochip_add: registered GPIOs 32 to 63 on device: gpio-mxs.1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.080000] gpiochip_add: registered GPIOs 64 to 95 on device: gpio-mxs.2
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.080000] gpiochip_add: registered GPIOs 96 to 127 on device: gpio-mxs.3
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.080000] gpiochip_add: registered GPIOs 128 to 159 on device: gpio-mxs.4
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.090000] Serial: AMBA PL011 UART driver
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.090000] duart: ttyAMA0 at MMIO 0x80074000 (irq = 47) is a PL011 rev2
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.100000] console [ttyAMA0] enabled
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.100000] mxs-usbphy mxs-usbphy.0: initialized usb phy
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.110000] mxs-usbphy mxs-usbphy.1: initialized usb phy
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.120000] bio: create slab <bio-0> at 0
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.130000] mxs-dma mxs-dma-apbh: initialized
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.140000] mxs-dma mxs-dma-apbx: initialized
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.140000] REG-3V3: 3300 mV normal 
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.150000] REG-1V8: 1800 mV normal 
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.150000] USB 5V: 5000 mV normal 
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.150000] VDDIO-SD: 3300 mV normal 
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.160000] Switching to clocksource mxs_timer
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.200000] NET: Registered protocol family 2
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.200000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.210000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.220000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.220000] TCP: Hash tables configured (established 8192 bind 8192)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.230000] TCP: reno registered
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.240000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.250000] NET: Registered protocol family 1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.250000] RPC: Registered named UNIX socket transport module.
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.260000] RPC: Registered udp transport module.
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.260000] RPC: Registered tcp transport module.
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.270000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.280000] audit: initializing netlink socket (disabled)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.280000] type=2000 audit(0.280:1): initialized
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.490000] fuse init (API version 7.18)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.500000] msgmni has been set to 498
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.500000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.510000] io scheduler noop registered (default)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.520000] uart-pl011 duart: no DMA platform data
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.520000] mxs-auart.1: ttyAPP1 at MMIO 0x8006c000 (irq = 113) is a mxs-auart.1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.530000] mxs-auart mxs-auart.1: Found APPUART 3.1.0
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.540000] ONFI param page 0 valid
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.540000] ONFI flash detected
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.550000] NAND device: Manufacturer ID: 0x01, Chip ID: 0xda (AMD S34ML02G1)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    0.550000] Scanning device for bad blocks
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.960000] 8 cmdlinepart partitions found on MTD device gpmi-nand
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.970000] Creating 8 MTD partitions on "gpmi-nand":
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.970000] 0x000000000000-0x000000100000 : "fcb"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.980000] 0x000000100000-0x000000200000 : "bbt"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    0.990000] 0x000000200000-0x000000300000 : "bootenv"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.000000] 0x000000300000-0x000000480000 : "bootstream0"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.010000] 0x000000480000-0x000000a80000 : "bootstream1"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.010000] 0x000000a80000-0x000000e80000 : "kernel"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.020000] 0x000000e80000-0x000003e80000 : "user"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.030000] 0x000003e80000-0x000010000000 : "root"
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    1.040000] GPMI NAND driver registered. (IMX)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.050000] UBI: attaching mtd7 to ubi0
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.050000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.060000] UBI: logical eraseblock size:    126976 bytes
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.060000] UBI: smallest flash I/O unit:    2048
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.070000] UBI: VID header offset:          2048 (aligned 2048)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    1.070000] UBI: data offset:                4096
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.770000] UBI: max. sequence number:       2
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.790000] UBI: attached mtd7 to ubi0
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.800000] UBI: MTD device name:            "root"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.800000] UBI: MTD device size:            193 MiB
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.810000] UBI: number of good PEBs:        1548
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.810000] UBI: number of bad PEBs:         0
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.820000] UBI: number of corrupted PEBs:   0
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.820000] UBI: max. allowed volumes:       128
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.830000] UBI: wear-leveling threshold:    4096
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.830000] UBI: number of internal volumes: 1
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.840000] UBI: number of user volumes:     1
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.840000] UBI: available PEBs:             0
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.840000] UBI: total number of reserved PEBs: 1548
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.850000] UBI: number of PEBs reserved for bad PEB handling: 15
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.860000] UBI: max/mean erase counter: 13/6
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.860000] UBI: image sequence number:  81689411
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.860000] UBI: background thread "ubi_bgt0d" started, PID 32
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.870000] UBI: attaching mtd6 to ubi1
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.870000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.880000] UBI: logical eraseblock size:    126976 bytes
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.890000] UBI: smallest flash I/O unit:    2048
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.890000] UBI: VID header offset:          2048 (aligned 2048)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    2.900000] UBI: data offset:                4096
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.320000] UBI: max. sequence number:       230
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.340000] UBI: attached mtd6 to ubi1
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.340000] UBI: MTD device name:            "user"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.350000] UBI: MTD device size:            48 MiB
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.350000] UBI: number of good PEBs:        384
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.360000] UBI: number of bad PEBs:         0
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.360000] UBI: number of corrupted PEBs:   0
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.370000] UBI: max. allowed volumes:       128
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.370000] UBI: wear-leveling threshold:    4096
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.380000] UBI: number of internal volumes: 1
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.380000] UBI: number of user volumes:     1
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.390000] UBI: available PEBs:             0
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.390000] UBI: total number of reserved PEBs: 384
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.400000] UBI: number of PEBs reserved for bad PEB handling: 3
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.400000] UBI: max/mean erase counter: 25/21
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.410000] UBI: image sequence number:  21497975
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.410000] UBI: background thread "ubi_bgt1d" started, PID 33
Aug 15 21:26:35 homematic-ccu2 user.err kernel: [    3.420000] UBI error: ubi_init: cannot attach mtd7
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.450000] fec_enet_mii_bus: probed
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.460000] rtc-rs5c372 0-0032: rs5c372a found, 24hr, driver version 0.6
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.480000] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.480000] stmp3xxx-rtc stmp3xxx-rtc: rtc core: registered stmp3xxx-rtc as rtc1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.490000] watchdog watchdog0: watchdog initialized, 115 seconds remaining
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.500000] cpuidle: using governor ladder
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.500000] cpuidle: using governor menu
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    3.510000] Registered led device: power
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    3.510000] Registered led device: internet
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    3.510000] Registered led device: info
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.510000] NET: Registered protocol family 17
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.520000] registered taskstats version 1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.520000] rtc-rs5c372 0-0032: setting system clock to 2017-08-15 19:26:32 UTC (1502825192)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.670000] UBIFS: mounted UBI device 0, volume 0, name "root"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.680000] UBIFS: mounted read-only
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.680000] UBIFS: file system size:   192749568 bytes (188232 KiB, 183 MiB, 1518 LEBs)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.690000] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.700000] UBIFS: media format:       w4/r0 (latest is w4/r0)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.700000] UBIFS: default compressor: lzo
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    3.710000] UBIFS: reserved for root:  0 bytes (0 KiB)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.720000] VFS: Mounted root (ubifs filesystem) readonly on device 0:12.
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.730000] devtmpfs: mounted
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    3.730000] Freeing init memory: 116K
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    4.300000] UBIFS: mounted UBI device 1, volume 0, name "user"
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    4.300000] UBIFS: file system size:   46727168 bytes (45632 KiB, 44 MiB, 368 LEBs)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    4.310000] UBIFS: journal size:       2285568 bytes (2232 KiB, 2 MiB, 18 LEBs)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    4.320000] UBIFS: media format:       w4/r0 (latest is w4/r0)
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    4.320000] UBIFS: default compressor: lzo
Aug 15 21:26:35 homematic-ccu2 user.notice kernel: [    4.330000] UBIFS: reserved for root:  2207039 bytes (2155 KiB)
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.010000] eq3spi eq3spi.0: master is unqueued, this is deprecated
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.080000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.130000] Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    5.140000] mxs-usbphy mxs-usbphy.0: enabling gadget mode
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.220000] usb0: MAC 00:1a:22:00:05:87
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.220000] usb0: HOST MAC 00:1a:22:00:05:86
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.230000] g_multi gadget: Mass Storage Function, version: 2009/09/11
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.240000] g_multi gadget: Number of LUNs=1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.240000]  lun0: LUN: read only CD-ROM file: /usr/share/eq3/install.iso
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.250000] g_multi gadget: Multifunction Composite Gadget
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.260000] g_multi gadget: g_multi ready
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.260000] fsl-usb2-udc: bind to driver g_multi
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.290000] tun: Universal TUN/TAP device driver, 1.6
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.300000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.380000] usbcore: registered new interface driver usbfs
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.380000] usbcore: registered new interface driver hub
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.390000] usbcore: registered new device driver usb
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.410000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.420000] mxs-ehci mxs-ehci.1: initializing i.MX USB Controller
Aug 15 21:26:35 homematic-ccu2 user.debug kernel: [    5.440000] mxs-usbphy mxs-usbphy.1: enabling host mode
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.460000] mxs-ehci mxs-ehci.1: using regulator to control VBUS
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.460000] mxs-ehci mxs-ehci.1: Freescale On-Chip EHCI Host Controller
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.470000] mxs-ehci mxs-ehci.1: new USB bus registered, assigned bus number 1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.510000] mxs-ehci mxs-ehci.1: irq 92, io mem 0x80090000
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.530000] mxs-ehci mxs-ehci.1: USB 2.0 started, EHCI 1.00
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.530000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.540000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.550000] usb usb1: Product: Freescale On-Chip EHCI Host Controller
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.550000] usb usb1: Manufacturer: Linux 3.4.11.ccu2 ehci_hcd
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.560000] usb usb1: SerialNumber: mxs-ehci.1
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.560000] hub 1-0:1.0: USB hub found
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.570000] hub 1-0:1.0: 1 port detected
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    5.600000] mxs-raw-auart mxs-raw-auart.0: Found raw APPUART 3.1.0
Aug 15 21:26:35 homematic-ccu2 user.info kernel: [    6.130000] ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 15 21:26:35 homematic-ccu2 user.err kernel: 0>[    6.900000] udevd[118]: starting version 182
Aug 15 19:26:35 homematic-ccu2 daemon.err udevd[118]: specified group 'dialout' unknown
Aug 15 19:26:36 homematic-ccu2 daemon.err udevd[118]: specified group 'kmem' unknown
Aug 15 19:26:36 homematic-ccu2 daemon.err udevd[118]: specified group 'video' unknown
Aug 15 19:26:36 homematic-ccu2 daemon.err udevd[118]: specified group 'lp' unknown
Aug 15 19:26:36 homematic-ccu2 daemon.err udevd[118]: specified group 'floppy' unknown
Aug 15 19:26:36 homematic-ccu2 daemon.err udevd[118]: specified group 'cdrom' unknown
Aug 15 19:26:36 homematic-ccu2 daemon.err udevd[118]: specified group 'tape' unknown
Aug 15 21:26:37 homematic-ccu2 user.info kernel: [    8.170000] mxs-mmc mxs-mmc.0: using regulator to control VDDIO-SD
Aug 15 21:26:37 homematic-ccu2 user.info kernel: [    8.200000] mxs-mmc mxs-mmc.0: initialized
Aug 15 21:26:37 homematic-ccu2 daemon.info udhcpd[164]: udhcpd (v1.20.2) started
Aug 15 21:26:37 homematic-ccu2 daemon.err udhcpd[164]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Aug 15 19:26:38 homematic-ccu2 daemon.info ifplugd(eth0)[212]: ifplugd 0.28 initializing.
Aug 15 21:26:38 homematic-ccu2 user.info kernel: [   10.010000] eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=imx28-fec-1:00, irq=185)
Aug 15 19:26:39 homematic-ccu2 daemon.info ifplugd(eth0)[212]: Using interface eth0/00:1A:22:0A:56:95 with driver <fec> (version: Revision: 1.0)
Aug 15 19:26:39 homematic-ccu2 daemon.info ifplugd(eth0)[212]: Using detection mode: SIOCETHTOOL
Aug 15 19:26:39 homematic-ccu2 daemon.info ifplugd(eth0)[212]: Initialization complete, link beat not detected.
Aug 15 21:26:40 homematic-ccu2 user.debug setclock: Try to get time from ntp.homematic.com
Aug 15 21:26:40 homematic-ccu2 user.debug setclock: Tue Aug 15 21:26:40 CEST 2017
Aug 15 21:26:40 homematic-ccu2 user.info kernel: [   12.010000] PHY: imx28-fec-1:00 - Link is Up - 100/Full
Aug 15 19:26:41 homematic-ccu2 daemon.info ifplugd(eth0)[212]: Link beat detected.
Aug 15 19:26:42 homematic-ccu2 daemon.info ifplugd(eth0)[212]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Aug 15 19:26:42 homematic-ccu2 daemon.warn ifplugd(eth0)[212]: client: net.ipv4.tcp_timestamps = 0
Aug 15 19:26:42 homematic-ccu2 daemon.warn ifplugd(eth0)[212]: client: eth0 carrier detected
Aug 15 19:26:43 homematic-ccu2 daemon.info ifplugd(eth0)[212]: Program executed successfully.
Aug 15 19:26:43 homematic-ccu2 user.info logger: Updating RF Lan Gateway Coprocessor Firmware
Aug 15 19:26:43 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Aug 15 19:26:43 homematic-ccu2 user.info logger: Updating RF Lan Gateway Firmware
Aug 15 19:26:43 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Aug 15 19:26:44 homematic-ccu2 user.info logger: Updating Wired Lan Gateway Firmware
Aug 15 19:26:44 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Aug 15 21:26:49 homematic-ccu2 user.info update-coprocessor: Version: 2.8.5
Aug 15 21:26:49 homematic-ccu2 user.info update-coprocessor: No update necessary
Aug 15 21:26:50 homematic-ccu2 user.info kernel: [   21.800000] eq3loop: created slave ttyS0
Aug 15 21:26:50 homematic-ccu2 user.info kernel: [   21.810000] eq3loop: created slave mmd_bidcos
Aug 15 21:26:53 homematic-ccu2 user.info kernel: [   24.230000] eq3loop: eq3loop_open_slave() mmd_bidcos
Aug 15 21:27:40 homematic-ccu2 user.debug setclock: Try to get time from ntp.homematic.com
Aug 15 21:27:39 homematic-ccu2 user.debug setclock: Tue Aug 15 21:27:39 CEST 2017
Aug 15 21:28:54 homematic-ccu2 user.info kernel: [  146.210000] eq3loop: eq3loop_open_slave() ttyS0
Aug 15 21:28:54 homematic-ccu2 user.info kernel: [  146.250000] eq3loop: eq3loop_close_slave() ttyS0
Aug 15 21:28:54 homematic-ccu2 user.info kernel: [  146.580000] eq3loop: eq3loop_open_slave() ttyS0
Aug 15 21:28:54 homematic-ccu2 user.info kernel: [  146.610000] eq3loop: eq3loop_close_slave() ttyS0
Aug 15 21:28:55 homematic-ccu2 user.info kernel: [  146.960000] eq3loop: eq3loop_open_slave() ttyS0
Aug 15 21:28:55 homematic-ccu2 user.notice kernel: [  147.000000] eq3loop: eq3loop_ioctl_slave() ttyS0: unhandled ioctl 0x5459
Aug 15 21:28:55 homematic-ccu2 user.notice kernel: [  147.020000] eq3loop: eq3loop_ioctl_slave() ttyS0: unhandled ioctl 0x545D
Aug 15 21:29:54 homematic-ccu2 user.info : hss_lcd: Programm initialisiert.
Aug 15 21:29:54 homematic-ccu2 user.info homematic: meine-homematic.de Versions - Upgrade auf 1.503
Aug 15 21:29:55 homematic-ccu2 user.info homematic: meine-homematic.de VPN Dienst und Autoupdate DEAKTIVIERT
Aug 15 19:29:55 homematic-ccu2 daemon.info init: starting pid 568, tty '/dev/ttyAMA0': '/sbin/getty -L ttyAMA0 115200 vt100 '
Aug 15 19:29:55 homematic-ccu2 daemon.info init: starting pid 569, tty '/dev/ttyGS0': '/sbin/getty -L ttyGS0 115200 vt100 '
Aug 15 21:37:04 homematic-ccu2 user.err rfd: XmlRpc transport error calling system.listMethods({"1009"}) on binary://127.0.0.1:1999/RPC2:
Aug 15 21:37:04 homematic-ccu2 user.err rfd: XmlRpc transport error calling listDevices({"1009"}) on binary://127.0.0.1:1999/RPC2:
Aug 15 21:37:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E6671:3","PROCESS"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:05 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:06 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E6671:3","SECTION"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:06 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:06 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:07 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E6671:3","STATE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:07 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:07 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:08 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0000D3C98C9B92:1","STATE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:08 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:08 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:09 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E6671:2","PROCESS"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:09 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:09 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:09 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D7098DA11B:6","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:37:09 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:09 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:12 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E6671:2","SECTION"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:12 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:12 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:12 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C98DD5D9:6","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:37:12 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:12 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E6671:2","STATE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:13 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000855699C5738:7","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:37:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:13 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:15 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C98DD5DC:6","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:37:15 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:37:15 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:37:39 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000895699E66DC:3","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:39 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 21:37:39 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000895699E66DC:3 [iseDOMdpHSS.cpp:77]
Aug 15 21:37:59 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5832:5","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 21:37:59 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 21:37:59 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5832:5 [iseDOMdpHSS.cpp:77]
Aug 15 21:38:19 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000895699E78EE:3","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 21:38:19 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 21:38:19 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000895699E78EE:3 [iseDOMdpHSS.cpp:77]
Aug 15 21:38:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000895699E6671:3","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 21:38:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 21:38:40 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000895699E6671:3 [iseDOMdpHSS.cpp:77]
Aug 15 21:38:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C99616B5:6","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:38:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:38:40 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000895699E711C:3","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000895699E711C:3 [iseDOMdpHSS.cpp:77]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D7098D9B47:6","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D7098DA11B:6","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C992AC76:6","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C98DD5D9:6","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D7098D9A72:6","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C99616E9:6","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000855699C5738:7","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E74B3:5","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C98DD5DC:6","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E74B4:5","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000B9569A510C0:5","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000B9569A510D2:5","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E6671:5","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E78EE:5","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C99616B5:6","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D7098D9B47:6","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000B9569A510C4:5","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C992AC76:6","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000B9569A510CC:5","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:01 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: object chn = dom.GetObject('4196'); object oOverflow = chn.DPByControl('POWERMETER_PSM.ENERGY_COUNTER_OVERFLOW'); object oEnergyCounter = chn.DPByControl('POWERMETER_PSM.ENERGY_COUNTER'); ob
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D7098D9A72:6","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0001D3C99616E9:6","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E74B3:5","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E74B4:5","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000B9569A510C0:5","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000B9569A510D2:5","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:02 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E6671:5","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000895699E78EE:5","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000B9569A510C4:5","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000B9569A510CC:5","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 21:39:03 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1389:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1389:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1389:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:05:52 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A97098EDC36:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A97098EDC36:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A97098EDC36:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:05:53 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99F1DED:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99F1DED:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99F1DED:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A41A:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A41A:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A41A:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:06:05 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:07:34 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"0000D7098E44DD:1","STATE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"] [iseXmlRpc.cpp:2641]
Aug 15 22:07:34 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:07:34 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1376:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1376:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1376:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:19:20 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A095:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A095:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A095:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CE88:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CE88:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CE88:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A37B:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A37B:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3A37B:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CEAE:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CEAE:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CEAE:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CED1:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CED1:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C994CED1:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1387:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1387:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000393C99A1387:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3325E:1","PARTY_SET_POINT_TEMPERATURE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POIN
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:54 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug 15 22:31:55 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3325E:1","PARTY_TIME_END"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"] [iseXmlRpc
Aug 15 22:31:55 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:55 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:31:55 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000A9569A3325E:1","PARTY_TIME_START"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"] [iseXm
Aug 15 22:31:55 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug 15 22:31:55 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal =  [iseDOMdpHSS.cpp:130]
Aug 15 22:54:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= OEQ0046558 [iseXmlRpc.cpp:2180]
Aug 15 23:13:30 homematic-ccu2 local0.err ReGaHss: Error: ISEVALUE::GetValueTypeFromString -> empty string [iseValue.cpp:1141]
Aug 15 23:18:06 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5738:4","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 23:18:06 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 23:18:06 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5738:4 [iseDOMdpHSS.cpp:77]
Aug 15 23:18:26 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5738:4","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 23:18:26 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 23:18:26 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5738:4 [iseDOMdpHSS.cpp:77]
Aug 15 23:18:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C98DD5D9:3","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 23:18:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 23:18:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C98DD5D9:3 [iseDOMdpHSS.cpp:77]
Aug 15 23:19:06 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C98DD5D9:3","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 23:19:06 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 23:19:06 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C98DD5D9:3 [iseDOMdpHSS.cpp:77]
Aug 15 23:19:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C99616B5:3","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 23:19:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 23:19:30 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C99616B5:3 [iseDOMdpHSS.cpp:77]
Aug 15 23:19:50 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C99616B5:3","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 23:19:50 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 23:19:50 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C99616B5:3 [iseDOMdpHSS.cpp:77]
Aug 15 23:23:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0008D5699C6169:4","LEVEL",0.100000} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 23:23:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 23:23:40 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0008D5699C6169:4 [iseDOMdpHSS.cpp:77]
Aug 15 23:24:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0008D5699C6169:4","LEVEL",0.400000} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 15 23:24:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 15 23:24:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0008D5699C6169:4 [iseDOMdpHSS.cpp:77]
Aug 16 00:00:01 homematic-ccu2 cron.info crond[109]: crond: USER root pid 1228 cmd /bin/sh /usr/local/etc/config/addons/mh/cloudmaticcheck.sh >> /dev/null
Aug 16 00:07:01 homematic-ccu2 cron.info crond[109]: crond: USER root pid 1241 cmd /bin/sh /usr/local/etc/config/addons/mh/loopupd.sh >> /dev/null
Aug 16 00:07:01 homematic-ccu2 user.info homematic: meine-homematic.de Update Prozess, heruntergeladene Version ist neuer, führe Update durch.
Aug 16 00:07:01 homematic-ccu2 user.info homematic: meine-homematic.de Update Prozess aktualisiert Dateirechte
Aug 16 00:07:02 homematic-ccu2 user.info homematic: meine-homematic.de Update Prozess beendet
Aug 16 04:00:01 homematic-ccu2 cron.info crond[109]: crond: USER root pid 1297 cmd /usr/sbin/logrotate -f /etc/logrotate.conf || logger -p error -t "logrotate" "logrotate aborted with error $?"
Aug 16 04:12:01 homematic-ccu2 cron.info crond[109]: crond: USER root pid 1301 cmd /bin/setHWClock.sh
Aug 16 04:14:01 homematic-ccu2 cron.info crond[109]: crond: USER root pid 1305 cmd /bin/SetInterfaceClock 127.0.0.1:2001
Aug 16 06:00:01 homematic-ccu2 cron.info crond[109]: crond: USER root pid 1322 cmd /bin/sh /usr/local/etc/config/addons/mh/cloudmaticcheck.sh >> /dev/null
Aug 16 06:07:01 homematic-ccu2 cron.info crond[109]: crond: USER root pid 1335 cmd /bin/sh /usr/local/etc/config/addons/mh/loopupd.sh >> /dev/null
Aug 16 07:18:29 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C3FCE:4","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:18:29 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:18:29 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C3FCE:4 [iseDOMdpHSS.cpp:77]
Aug 16 07:18:49 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C3FCE:4","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:18:49 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:18:49 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C3FCE:4 [iseDOMdpHSS.cpp:77]
Aug 16 07:19:09 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C99616B5:3","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:19:09 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:19:09 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C99616B5:3 [iseDOMdpHSS.cpp:77]
Aug 16 07:19:37 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C99616B5:3","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:19:37 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:19:37 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C99616B5:3 [iseDOMdpHSS.cpp:77]
Aug 16 07:20:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C99616B5:3","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:20:00 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:20:00 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C99616B5:3 [iseDOMdpHSS.cpp:77]
Aug 16 07:20:20 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0008D5699C6169:4","LEVEL",0.100000} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:20:20 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:20:20 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0008D5699C6169:4 [iseDOMdpHSS.cpp:77]
Aug 16 07:20:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0008D5699C6169:4","LEVEL",0.200000} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:20:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:20:40 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0008D5699C6169:4 [iseDOMdpHSS.cpp:77]
Aug 16 07:21:59 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5738:4","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:21:59 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:21:59 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5738:4 [iseDOMdpHSS.cpp:77]
Aug 16 07:22:19 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5738:4","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:22:19 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:22:19 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5738:4 [iseDOMdpHSS.cpp:77]
Aug 16 07:22:44 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5738:4","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:22:44 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:22:44 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5738:4 [iseDOMdpHSS.cpp:77]
Aug 16 07:23:35 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5738:4","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:23:35 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:23:35 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5738:4 [iseDOMdpHSS.cpp:77]
Aug 16 07:44:59 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C99616B5:3","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:44:59 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:44:59 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C99616B5:3 [iseDOMdpHSS.cpp:77]
Aug 16 07:45:19 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"0001D3C99616B5:3","STATE",true} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 07:45:19 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 07:45:19 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 0001D3C99616B5:3 [iseDOMdpHSS.cpp:77]
Aug 16 08:01:44 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5738:4","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 08:01:44 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 08:01:44 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5738:4 [iseDOMdpHSS.cpp:77]
Aug 16 08:02:35 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000855699C5738:4","STATE",false} result= [faultCode:-1,faultString:"Generic error"] [iseXmlRpc.cpp:2641]
Aug 16 08:02:35 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1525]
Aug 16 08:02:35 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000855699C5738:4 [iseDOMdpHSS.cpp:77]
RaspberryMatic 3.43.15.20190223 | ~95 HM-IP Geräte | Integration Rademacher Homepilot | Integration Yamaha Musiccast

66er
Beiträge: 3083
Registriert: 23.08.2015, 11:06
System: CCU
Hat sich bedankt: 116 Mal
Danksagung erhalten: 111 Mal

Re: HmIP-RF not running

Beitrag von 66er » 16.08.2017, 12:15

Hallo,

1.) aktuelle Firmware ist zwar schön und gut, hast Du mal den "Fehlerthread" dazu gelesen? Wenn nicht, nachholen.

2.) Nach Reboot kommt es leicht zu DC-Problemen. Wie hoch ist der bei Dir?

3.) Netzwerkverbindung und IP-Vergabe 100% i.O. ?

LG
66er

PS:
fast übersehen: Willkommen im Forum
Ich übernehme keine Haftung für von mir gegebene Antworten, Tipps und veröffentlichte Projekte! Jeder ist für sich selbst verantwortlich! Arbeiten an 230V sind von einer Elektrofachkraft auszuführen!

Homematic in Betrieb seit 15.08.2015, > 60 HM-Komp. | 3x USV APC ES400 | Visualisierung auf ioBroker | Audio: Home24-Apps

Raspberrymatic auf DS923+ in VMM (Produktivsystem1)
Rollläden, SSD, Wetter, Logging, Licht, RM, Sonos, Shelly

Raspberrymatic auf DS923+ in VMM (Produktivsystem2 )
Erweiterung GMA, Heizung, Licht, Shelly, SSD, Sonos

>100 Shelly-Geräte an Homematic | CCU2 endgültig in Rente | 3 Raspis als Rückfallebene für Raspimatic und ioBroker

Shelly an Homematic | Infrarot-Heizungssteuerung | Fensteröffnungszeit überwachen

dabu1794
Beiträge: 20
Registriert: 16.08.2017, 11:45
Wohnort: Oldenburg

Re: HmIP-RF not running

Beitrag von dabu1794 » 16.08.2017, 12:27

Dasnke für die schnelle Antwort:

zu 1) ja habe ich gemacht. Da war auch teilweise von diesem bzw. ähnlichem Problemen zu lesen. Leider war dies häufig mit anderen Dingen vermischt. Ich habe alles ausprobiert was ich bisher dazu gefunden habe und nun hier zusammengetragen. Ob ich irgendwo etwas übersehen haben sollte, kann ich natürlich nicht ausschließen...

zu 2) Nicht mehr als ca. 40%. Auch nach mehreren Stunden werden die Probleme nicht besser.

Die Fehlermeldung "HMIP-RF - Eine Komponente der Zentrale reagiert nicht mehr" wird allerdings auch angezeigt, nachdem die CCU2 in den Werkszustand zurückgesetzt und die Firmware neu aufgespielt wurde (ohne rückspielen des Backup)

zu 3) ja die Netzwerkverbindung ist zu 100% ok. Mit Netzwerken habe ich beruflich jeden Tag zu tun, ich glaube ich weiß was ich da mache :wink:
RaspberryMatic 3.43.15.20190223 | ~95 HM-IP Geräte | Integration Rademacher Homepilot | Integration Yamaha Musiccast

66er
Beiträge: 3083
Registriert: 23.08.2015, 11:06
System: CCU
Hat sich bedankt: 116 Mal
Danksagung erhalten: 111 Mal

Re: HmIP-RF not running

Beitrag von 66er » 16.08.2017, 12:30

Hast Du mal versucht, auf die vorherige Firmware zurückzugehen?

Ansonsten könnte das Teil natürlich auch tatsächlich eine Hardwaremacke haben. Noch Gewährleistung drauf?

Viel Erfolg
66er

dabu1794
Beiträge: 20
Registriert: 16.08.2017, 11:45
Wohnort: Oldenburg

Re: HmIP-RF not running

Beitrag von dabu1794 » 16.08.2017, 12:38

Nein das habe ich noch nicht probiert. Ich habe alles mit der aktuellen Firmware (2.29.18) neu aufgesetzt. Aber es kann sicherlich nicht schaden zu prüfen wie es mit der vorherigen Version so läuft. Werde ich heute Abend mal testen.

Die CCU2 ist 2 Wochen alt, also Gewählistung habe ich noch.
RaspberryMatic 3.43.15.20190223 | ~95 HM-IP Geräte | Integration Rademacher Homepilot | Integration Yamaha Musiccast

dabu1794
Beiträge: 20
Registriert: 16.08.2017, 11:45
Wohnort: Oldenburg

Re: HmIP-RF not running

Beitrag von dabu1794 » 16.08.2017, 12:39

Ach nee das geht gar nicht, denn in der Vorgängerversion werden einige Komponenten aus HM-Ip die ich einsetze, noch gar nicht unterstützt.
RaspberryMatic 3.43.15.20190223 | ~95 HM-IP Geräte | Integration Rademacher Homepilot | Integration Yamaha Musiccast

robsdobs
Beiträge: 510
Registriert: 08.08.2015, 22:52
Danksagung erhalten: 1 Mal

Re: HmIP-RF not running

Beitrag von robsdobs » 16.08.2017, 12:49

dabu1794 hat geschrieben:Die Fehlermeldung "HMIP-RF - Eine Komponente der Zentrale reagiert nicht mehr" wird allerdings auch angezeigt, nachdem die CCU2 in den Werkszustand zurückgesetzt und die Firmware neu aufgespielt wurde (ohne rückspielen des Backup)
dabu1794 hat geschrieben:Die CCU2 ist 2 Wochen alt, also Gewählistung habe ich noch.
Wenn der Fehler auch im Werkszustand auftritt, würde ich nicht länger probieren, sondern die CCU zurückschicken.
sehr selten im Forum

Antworten

Zurück zu „HomeMatic Zentrale (CCU / CCU2 / CCU3 / Charly)“