Auf meinem Raspi bekomme ich die Meldung "There is no USB memory for saving the diagram data or it could not be accessed. External USB memory is required to store the diagram data", wenn ich auf Diagramme gehe.
Wenn ich mit SSH auf die Raspi gehe, ist unter /usr/local/sdcard/measurement alles noch da.
# ls -l
total 2320<br/>
-rw-r--r-- 1 root root 157344 Nov 8 09:51 1.rrd
-rw-r--r-- 1 root root 157344 Nov 8 09:53 10.rrd
-rw-r--r-- 1 root root 157344 Nov 8 09:51 3.rrd
-rw-r--r-- 1 root root 157344 Nov 8 09:51 4.rrd
-rw-r--r-- 1 root root 157344 Nov 8 09:52 5.rrd
-rw-r--r-- 1 root root 1096992 Nov 8 09:53 6.rrd
-rw-r--r-- 1 root root 157344 Nov 8 09:52 7.rrd
-rw-r--r-- 1 root root 157344 Nov 8 09:53 8.rrd
-rw-r--r-- 1 root root 157344 Nov 8 09:52 9.rrd
# pwd
/usr/local/sdcard/measurement
Reboot hat nicht geholfen. Hat jemand eine Idee was ich da falsch mache?
Danke.
There is no USB memory for saving the diagram data or it could not be accessed. External USB memory is required to store
Moderator: Co-Administratoren
- shartelt
- Beiträge: 7421
- Registriert: 14.01.2015, 14:59
- System: Alternative CCU (auf Basis OCCU)
- Hat sich bedankt: 524 Mal
- Danksagung erhalten: 753 Mal
Re: There is no USB memory for saving the diagram data or it could not be accessed. External USB memory is required to s
ich gehe davon aus, dass Du die normale CCU Firmware installiert hast, nachdem Du im CCU Thread postest?
-
- Beiträge: 14149
- Registriert: 08.05.2013, 23:33
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Nordwürttemberg
- Hat sich bedankt: 583 Mal
- Danksagung erhalten: 1497 Mal
Re: There is no USB memory for saving the diagram data or it could not be accessed. External USB memory is required to s
Änderungshinweise zur neuen Firmware nicht beachtet. Aufschluss bringt auch eine Übersetzung des Satzes in der Fehlermeldung. Dort steht alles drin.
Gruß Xel66
-------------------------------------------------------------------------------------------
524 Kanäle in 146 Geräten und 267 CUxD-Kanäle in 34 CUxD-Geräten:
343 Programme, 334 Systemvariablen und 183 Direktverknüpfungen,
RaspberryMatic Version: 3.65.11.20221005 + Testsystem: CCU2 2.61.7
-------------------------------------------------------------------------------------------
Einsteigerthread, Programmlogik-Thread, WebUI-Handbuch
524 Kanäle in 146 Geräten und 267 CUxD-Kanäle in 34 CUxD-Geräten:
343 Programme, 334 Systemvariablen und 183 Direktverknüpfungen,
RaspberryMatic Version: 3.65.11.20221005 + Testsystem: CCU2 2.61.7
-------------------------------------------------------------------------------------------
Einsteigerthread, Programmlogik-Thread, WebUI-Handbuch