ich betreibe die HM-MOD-RPI-PCB (OCCU2) mit RPI3 und Home Assistant als Schnittstellenlayer. Leider kann ich meine HmIP-Broll Aktoren nicht anlernen. Verwende dazu den homematic manager V2.5.
Folgend kommt ein Logfile-Aussschnit (aus Home Asisstant add-on "HomeMatic OCCU")
Code: Alles auswählen
2019/04/13 23:14:35.422 <Debug> Device description rf_dim_t.xml loaded (67)
2019/04/13 23:14:35.453 <Debug> Device description rf_dim_2l_644.xml loaded (68)
2019/04/13 23:14:35.460 <Debug> Device description rf_sec_sd.xml loaded (69)
2019/04/13 23:14:35.474 <Debug> Device description rf_sec_sfa.xml loaded (70)
2019/04/13 23:14:35.503 <Debug> Device description rf_dim_2l_644_le_v2_4.xml loaded (71)
2019/04/13 23:14:35.527 <Debug> Device description rf_bl_644.xml loaded (72)
2019/04/13 23:14:35.542 <Debug> Device description rf_s_8_ba.xml loaded (73)
2019/04/13 23:14:35.553 <Debug> Device description rf_st_6_sh.xml loaded (74)
2019/04/13 23:14:35.559 <Debug> Device description rf_rc-key4-2.xml loaded (75)
2019/04/13 23:14:35.563 <Debug> Device description rf_ks550.xml loaded (76)
2019/04/13 23:14:35.569 <Debug> Device description rf_sen_wa_od.xml loaded (77)
2019/04/13 23:14:35.573 <Debug> Device description rf_pb-2-wm55_ge_v1_4.xml loaded (78)
2019/04/13 23:14:35.578 <Debug> Device description rf_rc_2_fm.xml loaded (79)
2019/04/13 23:14:35.582 <Debug> Device description rf_sec_sd_2.xml loaded (80)
2019/04/13 23:14:35.588 <Debug> Device description rf_rhs_e_v1_7.xml loaded (81)
2019/04/13 23:14:35.594 <Debug> Device description rf_dis_ep_wm55_le_v1_0.xml loaded (82)
2019/04/13 23:14:35.617 <Debug> Device description rf_dim_1t_fm_lf.xml loaded (83)
2019/04/13 23:14:35.625 <Debug> Device description rf_hm-wds100-c6-o-2.xml loaded (84)
2019/04/13 23:14:35.654 <Debug> Device description rf_dim_1l_644.xml loaded (85)
2019/04/13 23:14:35.686 <Debug> Device description rf_dim_1t_644.xml loaded (86)
2019/04/13 23:14:35.695 <Debug> Device description rf_sec_mdir_v1_5.xml loaded (87)
2019/04/13 23:14:35.708 <Debug> Device description rf_cm.xml loaded (88)
2019/04/13 23:14:35.718 <Debug> Device description rf_em_8_bit.xml loaded (89)
2019/04/13 23:14:35.740 <Debug> Device description rf_bl.xml loaded (90)
2019/04/13 23:14:35.764 <Debug> Device description rf_resc_win_pcb_sc.xml loaded (91)
2019/04/13 23:14:35.771 <Debug> Device description rf_ou_led16_ge_v1_1.xml loaded (92)
2019/04/13 23:14:35.784 <Debug> Device description rf_winmatic.xml loaded (93)
2019/04/13 23:14:35.790 <Debug> Device description rf_pb-2-wm55_le_v1_3.xml loaded (94)
2019/04/13 23:14:35.795 <Debug> Device description rf_rc-sec4-2.xml loaded (95)
2019/04/13 23:14:35.800 <Debug> Device description rf_sci_3.xml loaded (96)
2019/04/13 23:14:35.812 <Debug> Device description rf_s_2conf_644.xml loaded (97)
2019/04/13 23:14:35.816 <Debug> Device description rf_sec_sd_schueco.xml loaded (98)
2019/04/13 23:14:35.846 <Debug> Device description rf_roto_wdf_solar.xml loaded (99)
2019/04/13 23:14:35.889 <Debug> Device description rf_cc_rt_dn.xml loaded (100)
2019/04/13 23:14:35.914 <Debug> Device description rf_es_pmsw_le_v2_4.xml loaded (101)
2019/04/13 23:14:35.919 <Debug> Device description rf_central.xml loaded (102)
2019/04/13 23:14:35.930 <Debug> Device description rf_fs_ba.xml loaded (103)
2019/04/13 23:14:35.950 <Debug> Device description rf_dim_t_le_v1_9.xml loaded (104)
2019/04/13 23:14:35.969 <Debug> Device description rf_d_le_v1_7.xml loaded (105)
2019/04/13 23:14:35.975 <Debug> Device description rf_cmm.xml loaded (106)
2019/04/13 23:14:36.004 <Debug> Device description rf_dim_2t_644_le_v2_4.xml loaded (107)
2019/04/13 23:14:36.038 <Debug> Device description rf_dim_1t_644_le_v2_4.xml loaded (108)
2019/04/13 23:14:36.054 <Debug> Device description rf_em_8.xml loaded (109)
2019/04/13 23:14:36.084 <Debug> Device description rf_dim_1l_644_le_v2_4.xml loaded (110)
2019/04/13 23:14:36.097 <Debug> Device description rf_es_tx_wm.xml loaded (111)
2019/04/13 23:14:36.121 <Debug> Device description rf_cfm.xml loaded (112)
2019/04/13 23:14:36.136 <Debug> Device description rf_rc_19.xml loaded (113)
2019/04/13 23:14:36.143 <Debug> Device description rf_rhs_le_v1_6.xml loaded (114)
2019/04/13 23:14:36.147 <Debug> Device description rf_wds40_th_i_2.xml loaded (115)
2019/04/13 23:14:36.152 <Debug> Device description rf_sc_le_v1_6.xml loaded (116)
2019/04/13 23:14:36.181 <Debug> Device description rf_dim_1pwm_644_le_v2_4.xml loaded (117)
2019/04/13 23:14:36.197 <Debug> Device description rf_s_1conf_644_le_v2_3.xml loaded (118)
2019/04/13 23:14:36.219 <Debug> Device description rf_bl_le_v2_3.xml loaded (119)
2019/04/13 23:14:36.227 <Debug> Device description rf_dis_wm55.xml loaded (120)
2019/04/13 23:14:36.316 <Debug> Device description rf_tc_it_wm-w-eu.xml loaded (121)
2019/04/13 23:14:36.335 <Debug> Device description rf_sc.xml loaded (122)
2019/04/13 23:14:36.356 <Debug> Device description rf_bl_conf_644_e_v2_1.xml loaded (123)
2019/04/13 23:14:36.373 <Debug> Device description rf_s_le_v2_3.xml loaded (124)
2019/04/13 23:14:36.403 <Debug> Device description rf_dim_1t_dr.xml loaded (125)
2019/04/13 23:14:36.419 <Debug> Device description rf_s_ba.xml loaded (126)
2019/04/13 23:14:41.832 <Debug> PlatformInit()
2019/04/13 23:14:41.844 <Info> hmm_BidCos-RF support system.multicall
2019/04/13 23:14:41.844 <Info> hmm_BidCos-RF support event
2019/04/13 23:14:41.844 <Info> hmm_BidCos-RF support newDevices
2019/04/13 23:14:41.844 <Info> hmm_BidCos-RF support deleteDevices
2019/04/13 23:14:41.844 <Info> hmm_BidCos-RF support replaceDevice
2019/04/13 23:14:41.844 <Info> yes support replace device
2019/04/13 23:14:41.844 <Info> hmm_BidCos-RF support listDevices
2019/04/13 23:14:41.844 <Info> hmm_BidCos-RF support system.listMethods
2019/04/13 23:14:41.882 <Debug> GetAvailableFirmware for HM-RCV-50
2019/04/13 23:15:26.876 <Debug> Event: CENTRAL.PONG="hmm"
2019/04/13 23:15:26.876 <Debug> HSSXmlRpcEventDispatcher::Handle send 1 events
2019/04/13 23:15:26.883 <Debug> HSSXmlRpcEventDispatcher::Handle send completed
2019/04/13 23:15:31.989 <Debug> GetAvailableFirmware for HM-RCV-50
2019/04/13 23:15:56.648 RX SERIAL: fd 00 37 01 00 05 00 00
2019/04/13 23:15:56.649 RX SERIAL: 4a 01 00 8f 19 de 77 f0
2019/04/13 23:15:56.649 RX SERIAL: 00 03 10 30 14 f7 11 a0
2019/04/13 23:15:56.650 RX SERIAL: 00 13 57 09 99 7a 69 00
2019/04/13 23:15:56.651 RX SERIAL: 01 00 00 01 4c 01 00 0a
2019/04/13 23:15:56.651 RX SERIAL: 00 03 fb 58 dd 70 45 f0
2019/04/13 23:15:56.652 RX SERIAL: 18 bb 93 f4 b4 6f 78 2b
2019/04/13 23:15:56.653 RX SERIAL: 7a 10 fc 7d 32
2019/04/13 23:15:56.653 RX FRAME: 01 00 05 00 00 4a 01 00 8f 19 de 77 f0 00 03 10 30 14 f7 11 a0 00 13 57 09 99 7a 69 00 01 00 00 01 4c 01 00 0a 00 03 fb 58 dd 70 45 f0 18 bb 93 f4 b4 6f 78 2b 7a 10
2019/04/13 23:15:56.653 <Error> CCU2CoprocessorCommand::parseBidcosCommandResponse(): BidCoS event-message size not in specified limits. Incoming message dropped.
2019/04/13 23:15:56.653 CCU2CoprocessorCommand::parseBidcosCommandResponse(): Message size=55
2019/04/13 23:15:56.653 CCU2CoprocessorCommand::parseBidcosCommandResponse(): Response: 01 00 05 00 00 4a 01 00 8f 19 de 77 f0 00 03 10 30 14 f7 11 a0 00 13 57 09 99 7a 69 00 01 00 00 01 4c 01 00 0a 00 03 fb 58 dd 70 45 f0 18 bb 93 f4 b4 6f 78 2b 7a 10 .
2019/04/13 23:15:56.653 <Debug> (PEQ2216949) CCU2CommController::handleIncomingSerialFrame(): Command not parseable.
2019/04/13 23:16:06.777 RX SERIAL: fd 00 37 01 01 05 00 00
2019/04/13 23:16:06.778 RX SERIAL: 51 01 00 8f 19 de 77 f0
2019/04/13 23:16:06.778 RX SERIAL: 00 03 10 30 14 f7 11 a0
2019/04/13 23:16:06.779 RX SERIAL: 00 13 57 09 99 7a 69 00
2019/04/13 23:16:06.780 RX SERIAL: 01 00 00 01 4c 01 00 0a
2019/04/13 23:16:06.780 RX SERIAL: 00 03 fb 58 dd 70 45 f0
2019/04/13 23:16:06.781 RX SERIAL: 18 bb 93 f4 b4 6f 78 2b
2019/04/13 23:16:06.782 RX SERIAL: 7a 10 a8 44
2019/04/13 23:16:06.782 RX FRAME: 01 01 05 00 00 51 01 00 8f 19 de 77 f0 00 03 10 30 14 f7 11 a0 00 13 57 09 99 7a 69 00 01 00 00 01 4c 01 00 0a 00 03 fb 58 dd 70 45 f0 18 bb 93 f4 b4 6f 78 2b 7a 10
2019/04/13 23:16:06.782 <Error> CCU2CoprocessorCommand::parseBidcosCommandResponse(): BidCoS event-message size not in specified limits. Incoming message dropped.
2019/04/13 23:16:06.782 CCU2CoprocessorCommand::parseBidcosCommandResponse(): Message size=55
2019/04/13 23:16:06.783 CCU2CoprocessorCommand::parseBidcosCommandResponse(): Response: 01 01 05 00 00 51 01 00 8f 19 de 77 f0 00 03 10 30 14 f7 11 a0 00 13 57 09 99 7a 69 00 01 00 00 01 4c 01 00 0a 00 03 fb 58 dd 70 45 f0 18 bb 93 f4 b4 6f 78 2b 7a 10 .
2019/04/13 23:16:06.783 <Debug> (PEQ2216949) CCU2CommController::handleIncomingSerialFrame(): Command not parseable.