Fehlermeldung Regahss im log

Einrichtung, Anschluss und Programmierung der HomeMatic CCU

Moderator: Co-Administratoren

Antworten
K_Media
Beiträge: 294
Registriert: 18.05.2013, 19:42
Hat sich bedankt: 1 Mal
Danksagung erhalten: 1 Mal

Fehlermeldung Regahss im log

Beitrag von K_Media » 16.06.2019, 22:08

Hallo Leute,

meine CCU3 spinnt manchmal. Habe mir heute mal das Log angeschaut und es taucht super oft diese Meldung auf

Code: Alles auswählen

Jun 16 01:57:10 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
kann mir jemand sagen was das bedeutet bzw. wie ich dies abstellen kann?
Zuletzt geändert von alchy am 16.06.2019, 22:36, insgesamt 1-mal geändert.
Grund: Code in Codetags posten
schöne Grüße aus dem Bergischen.....

CCU3mit FHZ 2000 , Homeputer Studio 4 CL, Mediola Gateway V2. und jede Menge HM Aktoren und Sensoren
Nach oben
Bratmaxe
Beiträge: 1573
Registriert: 28.05.2015, 12:48
Wohnort: Willich
Hat sich bedankt: 4 Mal
Danksagung erhalten: 10 Mal

Re: Fehlermeldung Regahss im log

Beitrag von Bratmaxe » 18.06.2019, 12:51

Hast du vielleicht ein Script was den Fehler verursacht?

Evtl. mit dem Befahl: ExistsDeviceObject()?
Dann musst du vor der Verwendung dieses Object auf "null" prüfen.
Gruß Carsten
Nach oben
Benutzeravatar
Black
Beiträge: 5480
Registriert: 12.09.2015, 22:31
System: Alternative CCU (auf Basis OCCU)
Wohnort: Wegberg
Hat sich bedankt: 424 Mal
Danksagung erhalten: 1074 Mal
Kontaktdaten:
Kontaktdaten von Black

Re: Fehlermeldung Regahss im log

Beitrag von Black » 18.06.2019, 13:29

also mein IDA-Pro Disassembler sagt (ok, kann sich auch vertun, aber lag sonst immer ziemlich gut bis jetzt):

ExistsDeviceObject ()ist nicht als namentliche Methode Bestandteil einer Methode des RegaHSS Sprachraumes.

Black

Das sieht nach irgendeine Fail resonse der xmlrpc Schnittstelle zu einem Gerät aus
Wenn das Fernsehprogramm immer mehr durch nervende Werbung unterbrochen wird und der Radiomoderator nur noch Müll erzählt, ist es besser, die Zeit für sinnvolle Dinge zu nutzen -
mal aufs Klo zu gehen, ein Bier zu holen oder einfach mal den roten AUS-Knopf zu drücken. Klick - und weg

Script Time Scheduler V1.3
AstroSteuerung über Zeitmodul flexibel mit Offset / spätestens, frühestens
SDV 5.03.01 Das umfassende Entwicklungs und Diagnosetool für Homematik
Selektive Backups - Nützliche Dinge, die die WebUI nicht kann

Intel NUC6 Celeron 16GB mit 512GB SSD unter Proxxmox mit insgesamt 5 VM: 2 x bloatwarebefreiter Raspberrymatik, 2 x IOBroker als Middleware und einer MariaDB zur Archivierung. Verbrauch: 6W

technical contribution against annoying advertising
Nach oben
Bratmaxe
Beiträge: 1573
Registriert: 28.05.2015, 12:48
Wohnort: Willich
Hat sich bedankt: 4 Mal
Danksagung erhalten: 10 Mal

Re: Fehlermeldung Regahss im log

Beitrag von Bratmaxe » 19.06.2019, 12:51

Vielleicht beschreibst du mal was mit "CCU spinnt manachmal" gemeint ist und evtl. kann dir da geholfen werden.
Gruß Carsten
Nach oben
K_Media
Beiträge: 294
Registriert: 18.05.2013, 19:42
Hat sich bedankt: 1 Mal
Danksagung erhalten: 1 Mal

Re: Fehlermeldung Regahss im log

Beitrag von K_Media » 23.06.2019, 22:12

So, hier mal ein Auszug meines Log Datei

Code: Alles auswählen

[ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 20:51:25 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 20:51:50 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 20:52:14 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:02:40 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0661565:2","BOOT",true}],[methodName:"event",params:{"1007","LEQ0661565:2","ENERGY_COUNTER",11365.900000}],[methodName:"event",params:{"1007","LEQ0661565:2","POWER",0.000000}],[methodName:"event",params:{"1007","LEQ0661565:2","CURRENT",0.000000}],[methodName:"event",params:{"1007","LEQ0661565:2","VOLTAGE",233.000000}],[methodName:"event",params:{"1007","LEQ0661565:2","FREQUENCY",49.970000}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:40 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:43 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0741153:1","STATE",true}],[methodName:"event",params:{"1007","JEQ0741153:1","WORKING",true}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:43 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:44 ccu3-webui local0.err ReGaHss: ERROR: device pointer is null [ClearAllUnusedServiceMessages():iseManageDevice.cpp:361]
Jun 23 21:02:45 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0724327:2","ADJUSTING_COMMAND",0}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:45 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:45 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0724327:2","ADJUSTING_DATA",0}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:45 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:46 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0727307:1","VALVE_STATE",0}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:46 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:46 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0727307:1","ERROR",0}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:46 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:46 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ1056549:2","ACTUAL_TEMPERATURE",24.300000}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:46 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:46 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ1056549:2","ACTUAL_HUMIDITY",55.000000}],[methodName:"event",params:{"1007","LEQ1056549:2","SET_TEMPERATURE",12.000000}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:46 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:47 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0079869:1","TEMPERATURE",24.800000}],[methodName:"event",params:{"1007","KEQ0079869:1","HUMIDITY",60}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:47 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:47 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0741153:1","STATE",true}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:47 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:47 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0741153:1","WORKING",true}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:02:47 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:02:53 ccu3-webui daemon.info cuxd[589]: INIT 'xmlrpc_bin://127.0.0.1:31999' '3903'
Jun 23 21:02:54 ccu3-webui local0.err ReGaHss: ERROR: ScriptRuntimeError:  var source = dom.GetObject("$src$");     var maxTemp = dom.GetObject("Pool_Temp_max");     object maxTempDate = dom.GetObject("Pool_Zeit_max");     object minTempDate = dom.GetObject("Pool_Zeit_min");     if (source)     {     if (source.Value() > maxTemp.Variable())     {     maxTemp.Variable(source.Value());maxTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     maxTemp.Variable(curTemp.Value());     }     var source = dom.GetObject("$src$");     var minTemp = dom.GetObject("Pool_Temp_min");     if (source)     {     if (source.Value() < minTemp.Variable())     {     minTemp.Variable(source.Value());minTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     minTemp.Variable
Jun 23 21:02:54 ccu3-webui local0.err ReGaHss: ERROR: ScriptRuntimeError:  var source = dom.GetObject("$src$");     var maxTemp = dom.GetObject("Pool_Temp_max");     object maxTempDate = dom.GetObject("Pool_Zeit_max");     object minTempDate = dom.GetObject("Pool_Zeit_min");     if (source)     {     if (source.Value() > maxTemp.Variable())     {     maxTemp.Variable(source.Value());maxTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     maxTemp.Variable(curTemp.Value());     }     var source = dom.GetObject("$src$");     var minTemp = dom.GetObject("Pool_Temp_min");     if (source)     {     if (source.Value() < minTemp.Variable())     {     minTemp.Variable(source.Value());minTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     minTemp.Variable
Jun 23 21:02:54 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0001D3C9961523:6","ENERGY_COUNTER"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jun 23 21:02:54 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 19181, params: {"0001D3C9961523:6","ENERGY_COUNTER"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jun 23 21:02:54 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jun 23 21:02:54 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0001D3C9961523:6","ENERGY_COUNTER_OVERFLOW"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVERFLOW"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jun 23 21:02:54 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 19181, params: {"0001D3C9961523:6","ENERGY_COUNTER_OVERFLOW"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jun 23 21:02:54 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jun 23 21:03:29 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:03:55 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:04:20 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:04:44 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:05:10 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:05:35 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:05:59 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:06:24 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:06:50 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:07:14 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:07:39 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:08:05 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:08:30 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:08:54 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:09:20 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:09:45 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:10:09 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:10:35 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:11:00 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:11:24 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:11:49 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:12:15 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:12:39 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:13:04 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:13:30 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:13:55 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:14:19 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:14:45 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:15:10 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:15:34 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:16:00 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:16:25 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:16:49 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:17:14 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:17:40 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:18:04 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:18:29 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:18:55 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:19:20 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:19:44 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:20:10 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:20:35 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:20:59 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:21:24 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:21:50 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:22:14 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:22:39 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:23:05 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:23:30 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:23:54 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:24:20 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:24:45 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:25:09 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:25:34 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:26:00 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:26:24 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:26:49 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:27:15 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:27:39 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:28:04 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:28:30 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:28:55 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:29:19 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:29:44 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:30:10 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:30:34 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:30:59 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:31:25 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:31:49 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:32:14 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:32:40 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:33:05 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:33:29 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:33:55 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:34:20 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:34:44 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:35:09 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:35:35 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:35:59 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:36:24 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:36:50 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:37:15 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:37:39 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:38:05 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:38:30 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:38:43 ccu3-webui user.err ^E: Response ID do not match 
Jun 23 21:38:54 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:39:19 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:39:45 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:40:09 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:40:34 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:41:00 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:41:25 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:41:49 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:42:14 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:42:40 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:43:04 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:53:30 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","QEQ0052377:1","TEMPERATURE",22.400000}],[methodName:"event",params:{"1007","QEQ0052377:2","TEMPERATURE",32.700000}],[methodName:"event",params:{"1007","QEQ0052377:3","TEMPERATURE",-10.300000}],[methodName:"event",params:{"1007","QEQ0052377:4","TEMPERATURE",10.300000}],[methodName:"event",params:{"1007","QEQ0052377:0","LOWBAT",false}],[methodName:"event",params:{"1007","QEQ0052377:1","LOWBAT",false}],[methodName:"event",params:{"1007","QEQ0052377:2","LOWBAT",false}],[methodName:"event",params:{"1007","QEQ0052377:3","LOWBAT",false}],[methodName:"event",params:{"1007","QEQ0052377:4","LOWBAT",false}],[methodName:"event",params:{"1007","QEQ0052377:5","LOWBAT",false}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:30 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:31 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0739100:1","BRIGHTNESS",108}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:31 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:32 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0540625:1","LEVEL",0.995000}],[methodName:"event",params:{"1007","KEQ0540625:1","WORKING",true}],[methodName:"event",params:{"1007","KEQ0540625:1","DIRECTION",2}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:32 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:32 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ1056549:1","TEMPERATURE",24.200000}],[methodName:"event",params:{"1007","LEQ1056549:1","HUMIDITY",55}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:32 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:33 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0741153:1","STATE",true}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:33 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:33 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0741153:1","WORKING",true}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:33 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:34 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0540557:1","LEVEL",1.000000}],[methodName:"event",params:{"1007","KEQ0540557:1","WORKING",true}],[methodName:"event",params:{"1007","KEQ0540557:1","DIRECTION",2}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:34 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:34 ccu3-webui local0.err ReGaHss: ERROR: device pointer is null [ClearAllUnusedServiceMessages():iseManageDevice.cpp:361]
Jun 23 21:53:37 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0540356:1","LEVEL",1.000000}],[methodName:"event",params:{"1007","KEQ0540356:1","WORKING",true}],[methodName:"event",params:{"1007","KEQ0540356:1","DIRECTION",2}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:37 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:37 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","JEQ0741153:1","STATE",true}],[methodName:"event",params:{"1007","JEQ0741153:1","WORKING",true}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:37 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:38 ccu3-webui user.err Sniffing Mode: XmlRpcClient error calling event({[methodName:"event",params:{"1007","NEQ0382920:1","STATE",true}]}) on binary://127.0.0.1:31999/RPC2:
Jun 23 21:53:38 ccu3-webui user.err Sniffing Mode: XmlRpc transport error
Jun 23 21:53:43 ccu3-webui daemon.info cuxd[589]: INIT 'xmlrpc_bin://127.0.0.1:31999' '3903'
Jun 23 21:53:44 ccu3-webui local0.err ReGaHss: ERROR: ScriptRuntimeError:  var source = dom.GetObject("$src$");     var maxTemp = dom.GetObject("Pool_Temp_max");     object maxTempDate = dom.GetObject("Pool_Zeit_max");     object minTempDate = dom.GetObject("Pool_Zeit_min");     if (source)     {     if (source.Value() > maxTemp.Variable())     {     maxTemp.Variable(source.Value());maxTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     maxTemp.Variable(curTemp.Value());     }     var source = dom.GetObject("$src$");     var minTemp = dom.GetObject("Pool_Temp_min");     if (source)     {     if (source.Value() < minTemp.Variable())     {     minTemp.Variable(source.Value());minTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     minTemp.Variable
Jun 23 21:53:44 ccu3-webui local0.err ReGaHss: ERROR: ScriptRuntimeError:  var source = dom.GetObject("$src$");     var maxTemp = dom.GetObject("Pool_Temp_max");     object maxTempDate = dom.GetObject("Pool_Zeit_max");     object minTempDate = dom.GetObject("Pool_Zeit_min");     if (source)     {     if (source.Value() > maxTemp.Variable())     {     maxTemp.Variable(source.Value());maxTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     maxTemp.Variable(curTemp.Value());     }     var source = dom.GetObject("$src$");     var minTemp = dom.GetObject("Pool_Temp_min");     if (source)     {     if (source.Value() < minTemp.Variable())     {     minTemp.Variable(source.Value());minTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     minTemp.Variable
Jun 23 21:53:44 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0001D3C9961523:6","ENERGY_COUNTER"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jun 23 21:53:44 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 19181, params: {"0001D3C9961523:6","ENERGY_COUNTER"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jun 23 21:53:44 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jun 23 21:53:44 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0001D3C9961523:6","ENERGY_COUNTER_OVERFLOW"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVERFLOW"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jun 23 21:53:44 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 19181, params: {"0001D3C9961523:6","ENERGY_COUNTER_OVERFLOW"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jun 23 21:53:44 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jun 23 21:53:53 ccu3-webui user.err Sniffing Mode: HSSParameter::SetValue() 0.000000 Put failed
Jun 23 21:53:53 ccu3-webui daemon.err cuxd[589]: sendbinrpc(127.0.0.1:31999) connect(7s) Connection timed out
Jun 23 21:54:19 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:54:45 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:55:10 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:55:34 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:55:59 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:56:25 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:56:49 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:57:14 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:57:40 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:58:05 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:58:29 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:58:55 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:59:20 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 21:59:44 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 22:00:10 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 22:00:35 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 22:00:59 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 22:01:24 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 22:01:50 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 22:02:15 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 22:02:39 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 23 22:03:05 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]

Die Ccu resetet sich und startet die Programme neu

Was löst den Fehler aus? Ich verstehe bei dem Inhalt des Logs nur Bahnhof....
Zuletzt geändert von alchy am 23.06.2019, 22:21, insgesamt 1-mal geändert.
Grund: Code in Codetags posten
schöne Grüße aus dem Bergischen.....

CCU3mit FHZ 2000 , Homeputer Studio 4 CL, Mediola Gateway V2. und jede Menge HM Aktoren und Sensoren
Nach oben
Bratmaxe
Beiträge: 1573
Registriert: 28.05.2015, 12:48
Wohnort: Willich
Hat sich bedankt: 4 Mal
Danksagung erhalten: 10 Mal

Re: Fehlermeldung Regahss im log

Beitrag von Bratmaxe » 24.06.2019, 08:03

also ich habe auch schwierigkeiten so ein Log zu lesen, aber die Zeile:

Code: Alles auswählen

Jun 23 21:02:54 ccu3-webui local0.err ReGaHss: ERROR: ScriptRuntimeError:  var source = dom.GetObject("$src$");     var maxTemp = dom.GetObject("Pool_Temp_max");     object maxTempDate = dom.GetObject("Pool_Zeit_max");     object minTempDate = dom.GetObject("Pool_Zeit_min");     if (source)     {     if (source.Value() > maxTemp.Variable())     {     maxTemp.Variable(source.Value());maxTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     maxTemp.Variable(curTemp.Value());     }     var source = dom.GetObject("$src$");     var minTemp = dom.GetObject("Pool_Temp_min");     if (source)     {     if (source.Value() < minTemp.Variable())     {     minTemp.Variable(source.Value());minTempDate.Variable(system.Date("%H:%M "))     }     }     else     {     var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     var curTemp = wds.DPByHssDP("TEMPERATURE");     minTemp.Variable
sagt aus, das es einen Fehler in einem Skript gibt. Das Skript beginnt mit den Zeilen:

Code: Alles auswählen

var source = dom.GetObject("$src$");     
var maxTemp = dom.GetObject("Pool_Temp_max");     
object maxTempDate = dom.GetObject("Pool_Zeit_max");     
object minTempDate = dom.GetObject("Pool_Zeit_min");
Was das Skript genau machen soll, kann ich nicht sagen, da es nicht komplett im Log eingetragen wurde. Aber es hat etwas mit der Pooltemperatur zu tun. WO es jetzt genau in den Skript "knallt" müsstest du mal selber herausfinden.
Es wäre z.B. möglich, das die ein Gerät, oder ein Programm genauso genannt hast wie eine der Variabeln, die du in dem Skript aufrufst.
z.B. "Pool_Temp_max", "Pool_Zeit_max", "Pool_Zeit_min", "Pool_Temp_min"
da du mit GetObject nach einem beliebigen Objekt und nicht explizit nach einer Variable suchst.

um den Fehler auszuschließen kannst du jede Variable so abfragen:

Code: Alles auswählen

var maxTemp = dom.GetObject("Pool_Temp_max")

Code: Alles auswählen

var maxTemp = dom.GetObject(ID_SYSTEM_VARIABLES).Get("Pool_Temp_max");
ich vermute das die Zeilen:

Code: Alles auswählen

var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     
var curTemp = wds.DPByHssDP("TEMPERATURE");
maxTemp.Variable(curTemp.Value());
aber auch zu einem Fehler führen. Denn in "wds" schreibst du den Temperaturwert des Aktors, und dann versuchst du mit "wds.DPByHssDP("TEMPERATURE")" auf den Datenpunkt "TEMPERATURE" zu zu greifen, aber "wds" ist ja nicht das Object, sondern schon der ausgelesene Wert.
wenn du also aus den oberen Zeilen diese machst:

Code: Alles auswählen

maxTemp.Variable(dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value());
sollte der Fehler behoben sein.

Weiter unten im Skript machst du dasselbe nochmal aus:

Code: Alles auswählen

var wds = dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value();     
var curTemp = wds.DPByHssDP("TEMPERATURE");     
minTemp.Variable(curTemp.Value());
muss dann:

Code: Alles auswählen

minTemp.Variable(dom.GetObject("BidCos-RF.OEQ0801737:1.TEMPERATURE").Value());
werden und ob noch weitere Fehler vorhanden sind, kann ich nicht mehr sehen.


Nachtrag: Das Starten von Programmen bei einem Neustart kann verhindert werden.
Gruß Carsten
Nach oben
K_Media
Beiträge: 294
Registriert: 18.05.2013, 19:42
Hat sich bedankt: 1 Mal
Danksagung erhalten: 1 Mal

Re: Fehlermeldung Regahss im log

Beitrag von K_Media » 24.06.2019, 11:28

Vielen Dank.
Werde es spater mal testen
schöne Grüße aus dem Bergischen.....

CCU3mit FHZ 2000 , Homeputer Studio 4 CL, Mediola Gateway V2. und jede Menge HM Aktoren und Sensoren
Nach oben
K_Media
Beiträge: 294
Registriert: 18.05.2013, 19:42
Hat sich bedankt: 1 Mal
Danksagung erhalten: 1 Mal

Re: Fehlermeldung Regahss im log

Beitrag von K_Media » 24.06.2019, 19:32

So, habe das script mal abgeändert. Ich bekomme aber immer diese Meldung

Code: Alles auswählen

Jun 24 19:23:29 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:23:54 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:24:20 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:24:44 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:25:09 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:25:35 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:26:00 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:26:24 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:26:50 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:27:15 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:27:39 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:28:05 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Jun 24 19:28:30 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Was löst diesen eintrag aus?
Zuletzt geändert von alchy am 24.06.2019, 20:19, insgesamt 1-mal geändert.
Grund: Code in Codetags posten
schöne Grüße aus dem Bergischen.....

CCU3mit FHZ 2000 , Homeputer Studio 4 CL, Mediola Gateway V2. und jede Menge HM Aktoren und Sensoren
Nach oben
pantau62
Beiträge: 9
Registriert: 29.10.2017, 12:18
Hat sich bedankt: 2 Mal

Re: Fehlermeldung Regahss im log

Beitrag von pantau62 » 01.12.2019, 10:42

Hallo habe exakt den gleichen LOG-Fehlereintrag so alle 25 Sekunden
Bei mir startet die CCU3 sporadisch von selber durch.
Kann es was mit dieser Meldung zu tun haben?
Dec 1 10:26:31 CCU3-Stellwaende local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Dec 1 10:26:56 CCU3-Stellwaende local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Dec 1 10:27:21 CCU3-Stellwaende local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Dec 1 10:27:46 CCU3-Stellwaende local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Dec 1 10:28:11 CCU3-Stellwaende local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Nach oben
duplo
Beiträge: 1
Registriert: 10.11.2020, 17:59
System: CCU

Re: Fehlermeldung Regahss im log

Beitrag von duplo » 10.11.2020, 18:06

Ich habe seit längerem das gleiche Problem. Ich habe schon Alles versucht. Alls Skripte gelöscht. CCU3 mehrfach reseted und komplett neu aufgespielt. Alle Geräte dabei wieder neu angelernt. Dann geht es ein paar Tage gut und ca. alle drei Tage macht sie dann einen Neustart. Ich habe nur keine Idee ob und wenn ja welches Gerät evtl. die Meldung verursacht.

Wurde hier inzwischen eine Lösung gefunden?

Hier mal ein Auszug aus der Log-Datei:

Code: Alles auswählen

....
...
Nov 10 17:12:23 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Nov 10 17:12:48 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Nov 10 17:13:13 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Nov 10 17:13:38 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Nov 10 17:14:03 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
Nov 10 17:14:28 ccu3-webui local0.err ReGaHss: ERROR: pointer is null [ExistsDeviceObject():iseXmlRpc.cpp:4517]
...
...
...
Nov 10 17:51:33 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [vert.x-eventloop-thread-4] event: Error for listener de.eq3.ccu.groupdevice.service.BidCosDeviceEventHandler@1df59d: 
java.lang.NullPointerException
	at de.eq3.ccu.virtualdevice.service.internal.DeviceAddressHelper.getDeviceSerialNumberFromChannelOrDeviceAddress(DeviceAddressHelper.java:16)
	at de.eq3.ccu.groupdevice.service.BidCosDeviceEventHandler.event(BidCosDeviceEventHandler.java:129)
	at de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher.event(BidCosRpcDispatcher.java:214)
	at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.multiCall(AnnotationAwareRpcHandler.java:128)
	at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
	at de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:70)
	at de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:24)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.netty.util.concurrent.AbstractEventExecutor.safeExecute(AbstractEventExecutor.java:163)
	at io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(SingleThreadEventExecutor.java:403)
	at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:445)
	at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:858)
	at java.lang.Thread.run(Thread.java:748)
Nov 10 17:51:58 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [vert.x-eventloop-thread-4] event: Error for listener de.eq3.ccu.groupdevice.service.BidCosDeviceEventHandler@1df59d: 
java.lang.NullPointerException
	at de.eq3.ccu.virtualdevice.service.internal.DeviceAddressHelper.getDeviceSerialNumberFromChannelOrDeviceAddress(DeviceAddressHelper.java:16)
	at de.eq3.ccu.groupdevice.service.BidCosDeviceEventHandler.event(BidCosDeviceEventHandler.java:129)
	at de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher.event(BidCosRpcDispatcher.java:214)
	at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.multiCall(AnnotationAwareRpcHandler.java:128)
	at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
	at de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:70)
	at de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:24)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.netty.util.concurrent.AbstractEventExecutor.safeExecute(AbstractEventExecutor.java:163)
	at io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(SingleThreadEventExecutor.java:403)
	at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:445)
	at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:858)
	at java.lang.Thread.run(Thread.java:748)
Nov 10 17:52:23 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [vert.x-eventloop-thread-4] event: Error for listener de.eq3.ccu.groupdevice.service.BidCosDeviceEventHandler@1df59d: 
java.lang.NullPointerException
	at de.eq3.ccu.virtualdevice.service.internal.DeviceAddressHelper.getDeviceSerialNumberFromChannelOrDeviceAddress(DeviceAddressHelper.java:16)
	at de.eq3.ccu.groupdevice.service.BidCosDeviceEventHandler.event(BidCosDeviceEventHandler.java:129)
	at de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher.event(BidCosRpcDispatcher.java:214)
	at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.multiCall(AnnotationAwareRpcHandler.java:128)
	at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
	at de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:70)
	at de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:24)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.netty.util.concurrent.AbstractEventExecutor.safeExecute(AbstractEventExecutor.java:163)
	at io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(SingleThreadEventExecutor.java:403)
	at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:445)
	at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:858)
	at java.lang.Thread.run(Thread.java:748)
Nov 10 17:52:47 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [vert.x-eventloop-thread-4] event: Error for listener de.eq3.ccu.groupdevice.service.BidCosDeviceEventHandler@1df59d: 
java.lang.NullPointerException
	at de.eq3.ccu.virtualdevice.service.internal.DeviceAddressHelper.getDeviceSerialNumberFromChannelOrDeviceAddress(DeviceAddressHelper.java:16)
	at de.eq3.ccu.groupdevice.service.BidCosDeviceEventHandler.event(BidCosDeviceEventHandler.java:129)
	at de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher.event(BidCosRpcDispatcher.java:214)
	at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.multiCall(AnnotationAwareRpcHandler.java:128)
	at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
	at de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:70)
	at de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:24)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.netty.util.concurrent.AbstractEventExecutor.safeExecute(AbstractEventExecutor.java:163)
	at io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(SingleThreadEventExecutor.java:403)
	at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:445)
	at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:858)
	at java.lang.Thread.run(Thread.java:748)
Nov 10 17:52:50 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-6] SYSTEM: 0 Accesspoints in Queue 
Nov 10 17:52:50 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-6] SYSTEM: Permanent-/Burstlistener Handler utilization: 0/50 used 
Nov 10 17:52:50 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-6] SYSTEM: Eventlistener Handler utilization: 0/50 used
Zuletzt geändert von Roland M. am 10.11.2020, 18:08, insgesamt 1-mal geändert.
Grund: Code-Tags eingefügt
CCU3; CCU2 als LAN-Gateway;
Nach oben
Antworten

Zurück zu „HomeMatic Zentrale (CCU / CCU2 / CCU3 / Charly)“