*gelöst* Viele Fehler in der var/log/messages nach Neustart

Einrichtung, Anschluss und Programmierung der HomeMatic CCU

Moderator: Co-Administratoren

Antworten
Tomiliy
Beiträge: 158
Registriert: 03.12.2014, 19:28
Hat sich bedankt: 12 Mal
Danksagung erhalten: 1 Mal

*gelöst* Viele Fehler in der var/log/messages nach Neustart

Beitrag von Tomiliy » 31.03.2024, 18:32

Ich musste meine CCU3 kürzlich neu starten und lies einfach mal ein Tail mitlaufen.
Erschreckenderweise kommen dort viele Fehler, die mir aber leider nichts sagen...
Alle CCU Geräte sind per LAN Kabel verbunden

Kann mir bitte jemand beim Interpretieren helfen?
Das wäre super nett....

Es geht um folgende Fehler:
Ich habe 2 alte CCU2 die ich als Repeater nutze jeweils mit verschiedener Seriennummer, beide funktionieren und sind verbunden. Wieso die Meldungen?

Code: Alles auswählen

Mar 30 15:18:17 ccu3 auth.info sshd[964]: Accepted password for root from 192.168.99.115 port 58999 ssh2
Mar 30 15:18:17 ccu3 user.err update-coprocessor: Could not find gateway by unicast with ip 192.168.99.150. Trying search by serial number.
Mar 30 15:18:25 ccu3 user.err update-coprocessor: Could not find Lan Gateway using ip and serial number
Mar 30 15:18:25 ccu3 user.err update-coprocessor: UnifiedLanCommController::connect(): Unable to connect.
Mar 30 15:18:25 ccu3 user.err update-coprocessor: Could not connect to Lan Gateway ip: 192.168.99.150.
Mar 30 15:18:25 ccu3 user.info update-coprocessor: performGatewayCoproUpdate(): updating CCU2GW0002
Mar 30 15:18:27 ccu3 user.err update-coprocessor: Could not find gateway by unicast with ip 192.168.99.128. Trying search by serial number.
Mar 30 15:18:35 ccu3 user.err update-coprocessor: Could not find Lan Gateway using ip and serial number
Mar 30 15:18:35 ccu3 user.err update-coprocessor: UnifiedLanCommController::connect(): Unable to connect.
Mar 30 15:18:35 ccu3 user.err update-coprocessor: Could not connect to Lan Gateway ip: 192.168.99.128.
Mar 30 15:18:35 ccu3 user.info root: Updating RF Lan Gateway Firmware
Mar 30 15:18:35 ccu3 user.info update-lgw-firmware: LAN Gateway Firmware Update...
Mar 30 15:18:35 ccu3 user.info update-lgw-firmware: Gateway CCU2GW0001
Mar 30 15:18:37 ccu3 user.err update-lgw-firmware: Could not find gateway by unicast with ip 192.168.99.150. Trying search by serial number.
Mar 30 15:18:45 ccu3 user.err update-lgw-firmware: Could not find Lan Gateway using ip and serial number
Mar 30 15:18:45 ccu3 user.info update-lgw-firmware: LAN Gateway Firmware Update...
Mar 30 15:18:45 ccu3 user.info update-lgw-firmware: Gateway CCU2GW0002
Mar 30 15:18:47 ccu3 user.err update-lgw-firmware: Could not find gateway by unicast with ip 192.168.99.128. Trying search by serial number.
Mar 30 15:18:55 ccu3 user.err update-lgw-firmware: Could not find Lan Gateway using ip and serial number
Woher kommt der Routeeintrag Fehler? Ich nutze Cloudematic. Daher?

Code: Alles auswählen

Mar 30 15:19:47 ccu3 daemon.warn openvpn[1730]: ERROR: Linux route add command failed: external program exited with error status: 2
gebe ich route ein, erscheint:

Code: Alles auswählen

# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         fritz.box       0.0.0.0         UG    0      0        0 eth0
10.200.0.0      10.220.0.1      255.255.0.0     UG    0      0        0 tun0
10.220.0.1      *               255.255.255.255 UH    0      0        0 tun0
10.251.0.0      10.220.0.1      255.255.0.0     UG    0      0        0 tun0
192.168.99.0    *               255.255.255.0   U     0      0        0 eth0
Und letztendlich ein paar Meldungen zu Geräten:
Aber wer fragt die ab und wie? Und es ist ja Hardware, wie kann es da zu Problemen kommen?
Es scheint sich aber Ausnahmslos NUR um HMIP Geräte zu handeln.

Code: Alles auswählen

HMIP-SWDO:
Mar 30 15:20:02 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000DA498D29A6:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]

Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"0000DA498D29A6:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:02 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000DA498D29A6:0","SABOTAGE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SABOTAGE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"0000DA498D29A6:0","SABOTAGE"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
HmIP-ASIR-O:
Mar 30 15:20:02 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00209A4990E3B4:0","SABOTAGE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SABOTAGE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"00209A4990E3B4:0","SABOTAGE"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:02 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000C170999FFE3:1","ILLUMINATION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ILLUMINATION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000C170999FFE3:1","ILLUMINATION"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:02 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000C17099A002C:1","PRESENCE_DETECTION_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PRESENCE_DETECTION_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000C17099A002C:1","PRESENCE_DETECTION_STATE"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
HmIP-SPI
Mar 30 15:20:02 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000C170999FFE3:1","PRESENCE_DETECTION_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PRESENCE_DETECTION_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000C170999FFE3:1","PRESENCE_DETECTION_STATE"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:02 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A5A49946D1B:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000A5A49946D1B:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A98FA7D8:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000A58A98FA7D8:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A5A49946DEE:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000A5A49946DEE:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A98FA57B:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000A58A98FA57B:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A5A49946E0A:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000A5A49946E0A:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A98FAAB1:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000A58A98FAAB1:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A98FA6EC:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"000A58A98FA6EC:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00111BE989BD81:4","LEVEL"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"00111BE989BD81:4","LEVEL"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0001D8A98EFF4F:6","POWER"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: POWER"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"0001D8A98EFF4F:6","POWER"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115F2997DAF8:4","LEVEL"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"00115F2997DAF8:4","LEVEL"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:04 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00111A49A49688:4","LEVEL"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"00111A49A49688:4","LEVEL"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:04 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 30 15:20:05 ccu3 local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0001D8A98EFF4F:6","ENERGY_COUNTER"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2618]
Mar 30 15:20:05 ccu3 local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 37033, params: {"0001D8A98EFF4F:6","ENERGY_COUNTER"}) [CallGetValue():iseXmlRpc.cpp:1445]
Mar 30 15:20:05 ccu3 local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Zuletzt geändert von Tomiliy am 31.03.2024, 20:59, insgesamt 1-mal geändert.
--------------------------------------------
4 Kanäle in 42 Geräten:
1x HM-LC-Dim1T-FM, 1x HM-RC-8, 12x HM-Sec-SCo, 3x HM-LC-Sw1-Pl-2, 1x HM-PBI-4-FM, 1x HM-OU-CFM-Pl, 3x HM-Sen-EP, 1x HM-CC-VG-1, 1x HM-Sec-MDIR-2, 12x HM-CC-RT-DN, 1x HM-LC-Bl1PBU-FM, 1x HM-Sen-RD-O, 2x HM-PB-2-WM55-2, 1x HM-TC-IT-WM-W-EU, 1x 10000
--------------------------------------------
Nach oben
jp112sdl
Beiträge: 12119
Registriert: 20.11.2016, 20:01
Hat sich bedankt: 849 Mal
Danksagung erhalten: 2152 Mal
Kontaktdaten:
Kontaktdaten von jp112sdl

Re: Viele Fehler in der var/log/messages nach Neustart

Beitrag von jp112sdl » 31.03.2024, 20:40

Die XMLRPC Meldungen sind beim Start normal.
Wurde hier im Forum aber auch schon zig mal behandelt. :mrgreen:
Einfach ignorieren.

Die umgebaute CCU2 als LAN Gateway... Meldungen ebenfalls ignorieren.

VG,
Jérôme ☕️

---
Support for my Homebrew-Devices: Download JP-HB-Devices Addon
Nach oben
Tomiliy
Beiträge: 158
Registriert: 03.12.2014, 19:28
Hat sich bedankt: 12 Mal
Danksagung erhalten: 1 Mal

Re: Viele Fehler in der var/log/messages nach Neustart

Beitrag von Tomiliy » 31.03.2024, 20:57

Ja dann...
Vielen Dank für die Hinweise.
Aber warum betrifft das denn nur HMIP Geräte? Bzw. warum kommt das überhaupt bei denen?
Oder wurde das auch schon hier behandelt?

Ansonnsten: Ignorieren kann ich :-)
--------------------------------------------
4 Kanäle in 42 Geräten:
1x HM-LC-Dim1T-FM, 1x HM-RC-8, 12x HM-Sec-SCo, 3x HM-LC-Sw1-Pl-2, 1x HM-PBI-4-FM, 1x HM-OU-CFM-Pl, 3x HM-Sen-EP, 1x HM-CC-VG-1, 1x HM-Sec-MDIR-2, 12x HM-CC-RT-DN, 1x HM-LC-Bl1PBU-FM, 1x HM-Sen-RD-O, 2x HM-PB-2-WM55-2, 1x HM-TC-IT-WM-W-EU, 1x 10000
--------------------------------------------
Nach oben
Antworten

Zurück zu „HomeMatic Zentrale (CCU / CCU2 / CCU3 / Charly)“