Wie sieht man ein HM-CC-RT-DN (radiator ventil) CAL alarm auf dem CCU2?
Moderator: Co-Administratoren
Wie sieht man ein HM-CC-RT-DN (radiator ventil) CAL alarm auf dem CCU2?
(Never could find a solution, but it's getting annoying... How can you see a CAL alarm on a HM-CC-RT-DN on the CCU2? Nothing seems to work, absolutely nothing. Replies in German are fine...)
-
- Beiträge: 1573
- Registriert: 28.05.2015, 12:48
- Wohnort: Willich
- Hat sich bedankt: 4 Mal
- Danksagung erhalten: 10 Mal
Re: Wie sieht man ein HM-CC-RT-DN (radiator ventil) CAL alarm auf dem CCU2?
Hy,
there is a datapoint with the name "CLIMATECONTROL_RT_TRANSCEIVER" (Channel 4).
This datapoint has a sub datapoint named "FAULT_REPORTING" and maybe you can find the error in this datapoint.
Parameter FAULT_REPORTING
0 = NO_FAULT (Standard)
1 = VALVE_TIGHT
2 = ADJUSTING_RANGE_TOO_LARGE
3 = ADJUSTING_RANGE_TOO_SMALL
4 = COMMUNICATION_ERROR
5 = I DON't KNOW
6 = battery Low
maybe there are more fault codes that aren't in this list!
there is a datapoint with the name "CLIMATECONTROL_RT_TRANSCEIVER" (Channel 4).
This datapoint has a sub datapoint named "FAULT_REPORTING" and maybe you can find the error in this datapoint.
Parameter FAULT_REPORTING
0 = NO_FAULT (Standard)
1 = VALVE_TIGHT
2 = ADJUSTING_RANGE_TOO_LARGE
3 = ADJUSTING_RANGE_TOO_SMALL
4 = COMMUNICATION_ERROR
5 = I DON't KNOW
6 = battery Low
maybe there are more fault codes that aren't in this list!
Gruß Carsten
-
- Beiträge: 4155
- Registriert: 26.01.2016, 08:14
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Renningen
- Hat sich bedankt: 348 Mal
- Danksagung erhalten: 284 Mal
Re: Wie sieht man ein HM-CC-RT-DN (radiator ventil) CAL alarm auf dem CCU2?
CAL isn't a failure. It's just an info that the ventil is doing a "Entkalkungsfahrt" right now.
-
- Beiträge: 1573
- Registriert: 28.05.2015, 12:48
- Wohnort: Willich
- Hat sich bedankt: 4 Mal
- Danksagung erhalten: 10 Mal
Re: Wie sieht man ein HM-CC-RT-DN (radiator ventil) CAL alarm auf dem CCU2?
@Sven: stimmt. mich hat das CAL "alarm" irritiert..
ventil is doing a "Entkalkungsfahrt" klingt übrigens super
@blueznl:
Why do you need to detect this with a programm. You can adjust the time to start the calibration in the parameters of the device.
So you know when the calibration starts. It's allways the same time!
Gruß Carsten
-
- Beiträge: 4155
- Registriert: 26.01.2016, 08:14
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Renningen
- Hat sich bedankt: 348 Mal
- Danksagung erhalten: 284 Mal
Re: Wie sieht man ein HM-CC-RT-DN (radiator ventil) CAL alarm auf dem CCU2?
Mir ist keine Übersetzung eingefallen... aber der Kaffee wirkt langsam:
"...is doing descaling..."