CUxD 1.11a auf Raspberry Zero W

[uwe111]

Könnte es daran liegen, dass der Zero W keinen RJ45 Anschluss hat, sondern nur Wlan?

Das ist durchaus möglich, aber sicher bin ich mir nicht.

Gibt es Aussichten auf eine Behebung?

Ja, aber nicht zeitnah. Ich nehme es auf meine ToDo Liste.

Viele Grüße

Uwe

[Gelegenheitsbastler]

Testweise habe ich HomeMatic (das korrekte Image für den RasPi3) jetzt auf eine andere Micro-SD gespielt, in einen RasPi 3B gesteckt, gestartet, das Backup vom Zero W eingespielt und dann, da ich es vorher auf dem Zero W deinstalliert hatte, CUxD neu installiert. Auch nach dem Anlegen eines Gerätes und einem Neustart von CUxD stehen die Fehler immer noch im Statusfenster. Wo könnte das Problem liegen?

edit: Hier noch das Syslog

Code: Alles auswählen

Oct 17 18:11:18 homematic-raspi daemon.info cuxd[783]: write_pid /var/run/cuxd.pid [783]
Oct 17 18:11:18 homematic-raspi daemon.info cuxd[783]: CUx-Daemon(1.11a) on CCU(2.29.22.20171007) start PID:783
Oct 17 18:11:18 homematic-raspi daemon.info cuxd[783]: rename 'webcamconfig-default.ini' -> '/usr/local/addons/cuxd/webcamconfig.ini'
Oct 17 18:11:18 homematic-raspi daemon.info cuxd[783]: write_proxy /var/cache/cuxd_proxy.ini (783 /usr/local/addons/cuxd/ 1.11a 2.29.22.20171007 0)
Oct 17 18:11:18 homematic-raspi daemon.info cuxd[783]: add interface 'CUxD'
Oct 17 18:11:18 homematic-raspi daemon.info cuxd[783]: write 4 interfaces to /usr/local/etc/config/InterfacesList.xml
Oct 17 18:12:10 homematic-raspi daemon.info cuxd[783]: create CUX2801001 '' dtype=28&dtype2=1&dserial=1&dname=&dbase=10022&dcontrol=0'
Oct 17 18:12:31 homematic-raspi daemon.info cuxd[783]: CUx-Daemon restart(1)
Oct 17 18:12:31 homematic-raspi daemon.info cuxd[783]: unlink(/var/cache/cuxd_proxy.ini)
Oct 17 18:12:31 homematic-raspi daemon.info cuxd[783]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:587
Oct 17 18:12:31 homematic-raspi daemon.info cuxd[871]: write_pid /var/run/cuxd.pid [871]
Oct 17 18:12:31 homematic-raspi daemon.info cuxd[871]: CUx-Daemon(1.11a) on CCU(2.29.22.20171007) start PID:871
Oct 17 18:12:31 homematic-raspi daemon.info cuxd[871]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:587 update(0s):Tue Oct 17 18:12:31 2017
Oct 17 18:12:31 homematic-raspi daemon.info cuxd[871]: write_proxy /var/cache/cuxd_proxy.ini (871 /usr/local/addons/cuxd/ 1.11a 2.29.22.20171007 0)
Oct 17 18:18:12 homematic-raspi daemon.info cuxd[871]: Received SIGHUP signal.
Oct 17 18:18:12 homematic-raspi daemon.info cuxd[871]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:587
Oct 17 18:18:13 homematic-raspi daemon.info cuxd[1060]: write_pid /var/run/cuxd.pid [1060]
Oct 17 18:18:13 homematic-raspi daemon.info cuxd[1060]: CUx-Daemon(1.11a) on CCU(2.29.22.20171007) start PID:1060
Oct 17 18:18:13 homematic-raspi daemon.info cuxd[1060]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:587 update(-1s):Tue Oct 17 18:18:12 2017
Oct 17 18:18:13 homematic-raspi daemon.info cuxd[1060]: write_proxy /var/cache/cuxd_proxy.ini (1060 /usr/local/addons/cuxd/ 1.11a 2.29.22.20171007 0)

[uwe111]

edit: Hier noch das Syslog

Poste doch bitte mal das komplette Syslog (Full Syslog) und nicht nur die CUxD Einträge.

Viele Grüße

Uwe

[Gelegenheitsbastler]

Aus lauter Frust habe ich jetzt auf dem Zero W ein jungfräuliches Image genommen und CUxD installiert. Der Fehler blieb, auch ein Restart von CUcD brachte keine Änderung. Daher habe ich das System herunter gefahren, habe mich anderen Dingen gewidmet und eben gelesen, dass Du das Syslog haben möchtest. Darum habe ich den Zero W neu gestartet, schaue auf CUxD und sehe, dass er keine Fehlermeldung mehr bringt. Verrückte Geschichte. Nun wollte ich wissen, was wohl passiert, wenn ich dann mein Backup drauf spiele. CUxD war natürlich wieder verschwunden, weil ich es deinstalliert habe, bevor ich das Backup erstellt habe. Daher habe ich es neu installiert, woraufhin der Raspberry gebootet ist.

Nach dem Neustart und einer kleinen Wartezeit (damit alle Programme starten können), habe ich in die Einstellungen von CUxD geschaut. Jetzt läuft es - wieso auch immer. Der Vollständigkeit halber hier trotzdem noch das volle Log:

Code: Alles auswählen

Oct 17 22:06:09 homematic-raspi user.info root: Updating RF Lan Gateway Coprocessor Firmware
Oct 17 22:06:09 homematic-raspi user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Oct 17 22:06:09 homematic-raspi user.info root: Updating RF Lan Gateway Firmware
Oct 17 22:06:10 homematic-raspi user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Oct 17 22:06:10 homematic-raspi user.info root: Updating Wired Lan Gateway Firmware
Oct 17 22:06:10 homematic-raspi user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Oct 17 22:06:11 homematic-raspi daemon.info snmpd[518]: Created directory: /var/lib/snmp
Oct 17 22:06:11 homematic-raspi daemon.info snmpd[518]: Created directory: /var/lib/snmp/cert_indexes
Oct 17 22:06:11 homematic-raspi daemon.info snmpd[518]: Created directory: /var/lib/snmp/mib_indexes
Oct 17 22:06:11 homematic-raspi daemon.info snmpd[518]: Turning on AgentX master support.
Oct 17 22:06:11 homematic-raspi daemon.info snmpd[521]: NET-SNMP version 5.7.3
Oct 17 22:06:12 homematic-raspi user.info kernel: [   72.943828] eq3loop: created slave ttyS0
Oct 17 22:06:12 homematic-raspi user.info kernel: [   72.945713] eq3loop: created slave mmd_bidcos
Oct 17 22:06:16 homematic-raspi user.info kernel: [   77.452369] eq3loop: eq3loop_open_slave() mmd_bidcos
Oct 17 22:07:00 homematic-raspi cron.err crond[187]: time disparity of 25137846 minutes detected
Oct 17 22:07:13 homematic-raspi user.info kernel: [  134.039241] eq3loop: eq3loop_open_slave() ttyS0
Oct 17 22:07:13 homematic-raspi user.info kernel: [  134.049694] eq3loop: eq3loop_close_slave() ttyS0
Oct 17 22:07:13 homematic-raspi user.info kernel: [  134.112128] eq3loop: eq3loop_open_slave() ttyS0
Oct 17 22:07:13 homematic-raspi user.info kernel: [  134.112756] eq3loop: eq3loop_close_slave() ttyS0
Oct 17 22:07:13 homematic-raspi user.info kernel: [  134.212305] eq3loop: eq3loop_open_slave() ttyS0
Oct 17 22:07:13 homematic-raspi user.notice kernel: [  134.223307] eq3loop: eq3loop_ioctl_slave() ttyS0: unhandled ioctl 0x5459
Oct 17 22:07:13 homematic-raspi user.notice kernel: [  134.223353] eq3loop: eq3loop_ioctl_slave() ttyS0: unhandled ioctl 0x545D
Oct 17 22:07:23 homematic-raspi auth.info sshd[698]: Accepted password for root from 192.168.1.10 port 55564 ssh2
Oct 17 22:07:49 homematic-raspi daemon.warn cuxd[473]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Oct 17 22:08:09 homematic-raspi daemon.info cuxd[473]: INIT 'xmlrpc_bin://127.0.0.1:1999' '2162'

Ich hatte mich per SSH eingeloggt, um zu testen, ob ich 127.0.0.1 anpingen kann (hat geklappt), bevor ich CUxD öffne. Daher der SSH Eintrag.

[uwe111]

Darum habe ich den Zero W neu gestartet, schaue auf CUxD und sehe, dass er keine Fehlermeldung mehr bringt.

Hattest Du ihn nach der CUxD-Installation auch durchgestartet?

Der Vollständigkeit halber hier trotzdem noch das volle Log:

Hmm... in Deinem Log fehlt irgendwie der Anfang.

Viele Grüße

Uwe

[Gelegenheitsbastler]

Wie schon geschrieben, brachte auch ein Restart von CUxD keine Änderung. Daher habe ich den Raspberry gefrustet herunter gefahren.

Da ich den Zero noch in ein Gehäuse gepackt habe, musste ich ihn neu starten. Hier das aktuelle Protokoll (all):

Code: Alles auswählen

Jan  1 01:00:12 homematic-raspi syslog.info syslogd started: BusyBox v1.27.1
Jan  1 01:00:12 homematic-raspi user.notice kernel: klogd started: BusyBox v1.27.1 (2017-10-07 12:29:27 CEST)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000] Linux version 4.9.53 (damato@bilbo) (gcc version 6.4.0 (Buildroot 2017.08-00656-gaa3e245-dirty) ) #1 PREEMPT Sat Oct 7 13:04:48 CEST 2017
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] OF: fdt:Machine model: Raspberry Pi Zero W Rev 1.1
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] cma: Reserved 8 MiB at 0x1b400000
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] Memory policy: Data cache writeback
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.000000] On node 0 totalpages: 114688
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat c0982af8, node_mem_map db010000
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.000000]   Normal zone: 1008 pages used for memmap
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.000000]   Normal zone: 114688 pages, LIFO batch:31
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113680
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:C5:CE:78 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=tty2 root=PARTUUID=d2aff9b0-02 ro noswap rootfstype=ext4 elevator=deadline fsck.repair=yes lapic sdhci_bcm2708.enable_llm=0 rootwait rootdelay=5 consoleblank=0 logo.nologo quiet
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] Memory: 435516K/458752K available (6373K kernel code, 474K rwdata, 1964K rodata, 396K init, 732K bss, 15044K reserved, 8192K cma-reserved)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000] Virtual kernel memory layout:
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]     vmalloc : 0xdc800000 - 0xff800000   ( 560 MB)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]       .text : 0xc0008000 - 0xc0641780   (6374 kB)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]       .init : 0xc08af000 - 0xc0912000   ( 396 kB)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]       .data : 0xc0912000 - 0xc0988bfc   ( 475 kB)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.000000]        .bss : 0xc0988bfc - 0xc0a3fdb8   ( 733 kB)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] 	Build-time adjustment of leaf fanout to 32.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000000] NR_IRQS:16 nr_irqs:16 16
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000031] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000064] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000164] bcm2835: system timer (irq = 27)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000627] Console: colour dummy device 80x30
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000655] console [tty2] enabled
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.000689] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.060360] pid_max: default: 32768 minimum: 301
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.060808] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.060827] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.062080] Disabling memory control group subsystem
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.062213] CPU: Testing write buffer coherency: ok
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.062278] ftrace: allocating 21739 entries in 64 pages
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.177980] Setting up static identity map for 0x8200 - 0x8238
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.180767] devtmpfs: initialized
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.192255] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.192727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.192757] futex hash table entries: 256 (order: -1, 3072 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.194101] pinctrl core: initialized pinctrl subsystem
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.195711] NET: Registered protocol family 16
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.198821] DMA: preallocated 1024 KiB pool for atomic coherent allocations
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.209923] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.209941] hw-breakpoint: maximum watchpoint size is 4 bytes.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.213160] bcm2835-mbox 2000b880.mailbox: mailbox enabled
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.215023] irq: no irq domain found for /soc/aux@0x7e215000 !
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.290741] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80d000, dmachans=0x1
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.293697] SCSI subsystem initialized
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.293976] usbcore: registered new interface driver usbfs
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.294118] usbcore: registered new interface driver hub
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.294363] usbcore: registered new device driver usb
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.298257] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-06 13:56
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.300559] clocksource: Switched to clocksource timer
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.364162] VFS: Disk quotas dquot_6.6.0
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.364288] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.364648] FS-Cache: Loaded
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.365033] CacheFiles: Loaded
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.387918] NET: Registered protocol family 2
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.389370] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.389461] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.389533] TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.389640] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.389670] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.389989] NET: Registered protocol family 1
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.390978] RPC: Registered named UNIX socket transport module.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.390993] RPC: Registered udp transport module.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.390999] RPC: Registered tcp transport module.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.391005] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.392545] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.395246] workingset: timestamp_bits=14 max_order=17 bucket_order=3
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.417654] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.419578] NFS: Registering the id_resolver key type
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.419632] Key type id_resolver registered
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.419640] Key type id_legacy registered
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.424769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.425133] io scheduler noop registered
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.425147] io scheduler deadline registered (default)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.425641] io scheduler cfq registered
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.432445] BCM2708FB: allocated DMA memory 5b500000
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.432514] BCM2708FB: allocated DMA channel 0 @ dc80d000
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.441086] Console: switching to colour frame buffer device 80x30
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.447959] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
Jan  1 01:00:12 homematic-raspi user.err kernel: [    0.450103] bcm2835-aux-uart 20215040.serial: could not get clk: -517
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.452810] bcm2835-rng 20104000.rng: hwrng registered
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.453008] vc-cma: Videocore CMA driver
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.453021] vc-cma: vc_cma_base      = 0x00000000
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.453029] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.453036] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.453437] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.454476] vc-sm: Videocore shared memory driver
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.483079] brd: module loaded
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.497158] loop: module loaded
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.497182] Loading iSCSI transport class v2.0-870.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.498154] usbcore: registered new interface driver smsc95xx
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.498187] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.726717] Core Release: 2.80a
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.726756] Setting default values for core params
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.726792] Finished setting default values for core params
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.927549] Using Buffer DMA mode
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.927563] Periodic Transfer Interrupt Enhancement - disabled
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.927570] Multiprocessor Interrupt Enhancement - disabled
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.927582] OTG VER PARAM: 0, OTG VER FLAG: 0
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.927596] Dedicated Tx FIFOs mode
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928306] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xdb514000 dma = 0x5b514000 len=9024
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928335] FIQ FSM acceleration enabled for :
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928335] Non-periodic Split Transactions
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928335] Periodic Split Transactions
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928335] High-Speed Isochronous Endpoints
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928335] Interrupt/Control Split Transaction hack enabled
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.928350] dwc_otg: Microframe scheduler enabled
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928447] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc04a7c70
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928463] WARN::hcd_init_fiq:460: FIQ ASM at 0xc04a7f4c length 36
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928493] WARN::hcd_init_fiq:486: MPHI regs_base at 0xdc8a5000
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.928577] dwc_otg 20980000.usb: DWC OTG Controller
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.928642] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.928743] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928800] Init: Port Power? op_state=1
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    0.928807] Init: Power Port (0)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.929269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.929287] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.929300] usb usb1: Product: DWC OTG Controller
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.929311] usb usb1: Manufacturer: Linux 4.9.53 dwc_otg_hcd
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.929321] usb usb1: SerialNumber: 20980000.usb
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.930854] hub 1-0:1.0: USB hub found
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.930968] hub 1-0:1.0: 1 port detected
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.932017] dwc_otg: FIQ enabled
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.932030] dwc_otg: NAK holdoff enabled
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.932038] dwc_otg: FIQ split-transaction FSM enabled
Jan  1 01:00:12 homematic-raspi user.debug kernel: [    0.932062] Module dwc_common_port init
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.932642] usbcore: registered new interface driver usb-storage
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.933138] mousedev: PS/2 mouse device common for all mice
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.934995] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.935585] bcm2835-cpufreq: min=700000 max=1000000
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.936432] sdhci: Secure Digital Host Controller Interface driver
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.936445] sdhci: Copyright(c) Pierre Ossman
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.936981] sdhost-bcm2835 20202000.sdhost: could not get clk, deferring probe
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.939501] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.939692] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.940422] hidraw: raw HID events driver (C) Jiri Kosina
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.940977] usbcore: registered new interface driver usbhid
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.940987] usbhid: USB HID core driver
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.942360] vchiq: vchiq_init_state: slot_zero = 0xdb580000, is_master = 0
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.944484] [vc_sm_connected_init]: start
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.954717] [vc_sm_connected_init]: end - returning 0
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.955205] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.955276] Initializing XFRM netlink socket
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.955318] NET: Registered protocol family 17
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    0.955458] Key type dns_resolver registered
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.957313] registered taskstats version 1
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.967051] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 214, base_baud = 31250000) is a 16550
Jan  1 01:00:12 homematic-raspi user.info kernel: [    0.968161] sdhost: log_buf @ db513000 (5b513000)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.040652] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.043120] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.043137] mmc-bcm2835 20300000.mmc: DMA channel allocated
Jan  1 01:00:12 homematic-raspi user.notice kernel: [    1.073969] random: fast init done
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    1.118564] mmc0: host does not support reading read-only switch, assuming write-enable
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    1.120536] mmc0: Problem switching card into high-speed mode!
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.120779] of_cfs_init
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.120972] of_cfs_init: OK
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.122198] Waiting 5 sec before mounting root device...
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.122579] mmc0: new SDHC card at address 0001
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.124868] mmcblk0: mmc0:0001 00000 7.45 GiB
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.132620]  mmcblk0: p1 p2 p3
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    1.142759] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    1.144441] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    1.146122] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    1.149109] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    1.249109] mmc1: new high speed SDIO card at address 0001
Jan  1 01:00:12 homematic-raspi user.info kernel: [    6.175692] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 01:00:12 homematic-raspi user.info kernel: [    6.175800] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 01:00:12 homematic-raspi user.info kernel: [    6.185174] devtmpfs: mounted
Jan  1 01:00:12 homematic-raspi user.info kernel: [    6.186439] Freeing unused kernel memory: 396K
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    6.186449] This architecture does not have kernel memory protection.
Jan  1 01:00:12 homematic-raspi user.warn kernel: [    6.889406] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
Jan  1 01:00:12 homematic-raspi user.info kernel: [    6.918700] EXT4-fs (mmcblk0p3): mounted filesystem with journalled data mode. Opts: data=journal
Jan  1 01:00:12 homematic-raspi user.info kernel: [    7.361894] i2c /dev entries driver
Jan  1 01:00:12 homematic-raspi user.info kernel: [    7.457288] tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:00:12 homematic-raspi user.info kernel: [    7.457303] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 01:00:13 homematic-raspi user.warn kernel: [    7.487109] bcm2835_raw_uart: loading out-of-tree module taints kernel.
Jan  1 01:00:13 homematic-raspi user.info kernel: [    7.489334] bcm2835_raw_uart: Driver successfully loaded for uart0_base=0x20201000, uart0_irq=81.
Jan  1 01:00:13 homematic-raspi daemon.info kernel: [   13.163344] udevd[202]: starting version 3.2.2
Jan  1 01:00:13 homematic-raspi daemon.info kernel: [   13.263473] udevd[203]: starting eudev-3.2.2
Jan  1 01:00:13 homematic-raspi user.info kernel: [   13.833287] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
Jan  1 01:00:14 homematic-raspi user.info kernel: [   14.371336] usbcore: registered new interface driver brcmfmac
Jan  1 01:00:14 homematic-raspi user.info kernel: [   14.507609] brcmfmac: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
Jan  1 01:00:14 homematic-raspi user.err kernel: [   14.508787] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38 
Jan  1 01:00:15 homematic-raspi daemon.warn /usr/sbin/irqbalance: Balancing is ineffective on systems with a single cpu.  Shutting down
Jan  1 01:00:15 homematic-raspi user.notice kernel: [   15.303352] random: crng init done
Jan  1 01:00:45 homematic-raspi user.info kernel: [   45.657604] Bluetooth: Core ver 2.22
Jan  1 01:00:45 homematic-raspi user.info kernel: [   45.657805] NET: Registered protocol family 31
Jan  1 01:00:45 homematic-raspi user.info kernel: [   45.657817] Bluetooth: HCI device and connection manager initialized
Jan  1 01:00:45 homematic-raspi user.info kernel: [   45.657853] Bluetooth: HCI socket layer initialized
Jan  1 01:00:45 homematic-raspi user.info kernel: [   45.657875] Bluetooth: L2CAP socket layer initialized
Jan  1 01:00:45 homematic-raspi user.info kernel: [   45.657971] Bluetooth: SCO socket layer initialized
Jan  1 01:00:45 homematic-raspi user.info kernel: [   46.014729] brcmfmac: power management disabled
Jan  1 01:00:51 homematic-raspi daemon.notice wpa_supplicant[303]: Successfully initialized wpa_supplicant
Jan  1 01:00:51 homematic-raspi daemon.err udhcpc[317]: started, v1.27.1
Jan  1 01:00:51 homematic-raspi daemon.err udhcpc[317]: sending discover
Jan  1 01:00:51 homematic-raspi daemon.notice wpa_supplicant[306]: wlan0: Trying to associate with 5c:49:79:46:af:29 (SSID='daheim' freq=2437 MHz)
Jan  1 01:00:51 homematic-raspi daemon.err wpa_supplicant[306]: ioctl[SIOCSIWFREQ]: Operation not supported
Jan  1 01:00:51 homematic-raspi daemon.notice wpa_supplicant[306]: wlan0: Association request to the driver failed
Jan  1 01:00:52 homematic-raspi daemon.notice wpa_supplicant[306]: wlan0: Associated with 5c:49:79:46:af:29
Jan  1 01:00:52 homematic-raspi daemon.notice wpa_supplicant[306]: wlan0: WPA: Key negotiation completed with 5c:49:79:46:af:29 [PTK=CCMP GTK=TKIP]
Jan  1 01:00:52 homematic-raspi daemon.notice wpa_supplicant[306]: wlan0: CTRL-EVENT-CONNECTED - Connection to 5c:49:79:46:af:29 completed [id=0 id_str=]
Jan  1 01:00:54 homematic-raspi daemon.err udhcpc[317]: sending discover
Jan  1 01:00:54 homematic-raspi daemon.err udhcpc[317]: sending select for 192.168.1.84
Jan  1 01:00:54 homematic-raspi daemon.err udhcpc[317]: lease of 192.168.1.84 obtained, lease time 86400
Jan  1 01:00:55 homematic-raspi user.info kernel: [   55.343709] NET: Registered protocol family 10
Jan  1 01:00:55 homematic-raspi user.info kernel: [   55.640896] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:00:55 homematic-raspi user.info firewall: configuration set
Jan  1 01:00:55 homematic-raspi daemon.info ifplugd(wlan0)[380]: ifplugd 0.28 initializing, using NETLINK device monitoring.
Jan  1 01:00:55 homematic-raspi daemon.info ifplugd(wlan0)[380]: Using interface wlan0/B8:27:EB:90:9B:2D with driver <brcmfmac> (version: 7.45.41.26)
Jan  1 01:00:55 homematic-raspi daemon.info ifplugd(wlan0)[380]: Using detection mode: wireless extension
Jan  1 01:00:55 homematic-raspi daemon.info ifplugd(wlan0)[380]: Initialization complete, link beat detected, interface enabled.
Jan  1 01:00:56 homematic-raspi daemon.info ifplugd(wlan0)[380]: Executing '/etc/ifplugd/ifplugd.action wlan0 up'.
Jan  1 01:00:56 homematic-raspi daemon.warn ifplugd(wlan0)[380]: client: ifup: interface wlan0 already configured
Jan  1 01:00:56 homematic-raspi daemon.info ifplugd(wlan0)[380]: Program executed successfully.
Oct 17 22:54:14 homematic-raspi daemon.notice ntpdate[386]: step time server 192.168.1.1 offset 1508273592.395526 sec
Oct 17 22:54:14 homematic-raspi daemon.notice ntpd[388]: ntpd 4.2.8p10@1.3728-o Sat Oct  7 10:43:15 UTC 2017 (1): Starting
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[388]: Command line: /usr/sbin/ntpd -g 192.168.1.1
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[390]: proto: precision = 3.000 usec (-18)
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[390]: Listen and drop on 0 v6wildcard [::]:123
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[390]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[390]: Listen normally on 2 lo 127.0.0.1:123
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[390]: Listen normally on 3 wlan0 192.168.1.84:123
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[390]: Listen normally on 4 lo [::1]:123
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[390]: Listen normally on 5 wlan0 [fe80::ba27:ebff:fe90:9b2d%2]:123
Oct 17 22:54:14 homematic-raspi daemon.info ntpd[390]: Listening on routing socket on fd #22 for interface updates
Oct 17 22:54:15 homematic-raspi daemon.err xinetd[409]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
Oct 17 22:54:15 homematic-raspi daemon.crit xinetd[409]: 409 {init_services} no services. Exiting...
Oct 17 22:54:15 homematic-raspi user.err : Could not read serial number
Oct 17 22:54:15 homematic-raspi auth.info sshd[433]: Server listening on 0.0.0.0 port 22.
Oct 17 22:54:15 homematic-raspi auth.info sshd[433]: Server listening on :: port 22.
Oct 17 22:54:16 homematic-raspi daemon.info cuxd[472]: write_pid /var/run/cuxd.pid [472]
Oct 17 22:54:16 homematic-raspi user.info homematic: started cux-daemon
Oct 17 22:54:16 homematic-raspi daemon.info cuxd[472]: CUx-Daemon(1.11a) on CCU(2.29.22.20171007) start PID:472
Oct 17 22:54:16 homematic-raspi daemon.info cuxd[472]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:12 update(-408s):Tue Oct 17 22:47:28 2017
Oct 17 22:54:16 homematic-raspi daemon.info cuxd[472]: write_proxy /var/cache/cuxd_proxy.ini (472 /usr/local/addons/cuxd/ 1.11a 2.29.22.20171007 0)
Oct 17 22:54:16 homematic-raspi daemon.info cuxd[472]: add interface 'CUxD'
Oct 17 22:54:16 homematic-raspi daemon.info cuxd[472]: write 4 interfaces to /usr/local/etc/config/InterfacesList.xml
Oct 17 22:54:16 homematic-raspi daemon.err cuxd[472]: socket: No such device
Oct 17 22:54:16 homematic-raspi user.info root: Updating RF Lan Gateway Coprocessor Firmware
Oct 17 22:54:16 homematic-raspi user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Oct 17 22:54:16 homematic-raspi user.info root: Updating RF Lan Gateway Firmware
Oct 17 22:54:16 homematic-raspi user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Oct 17 22:54:16 homematic-raspi user.info root: Updating Wired Lan Gateway Firmware
Oct 17 22:54:16 homematic-raspi user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Oct 17 22:54:17 homematic-raspi daemon.info snmpd[521]: Created directory: /var/lib/snmp
Oct 17 22:54:17 homematic-raspi daemon.info snmpd[521]: Created directory: /var/lib/snmp/cert_indexes
Oct 17 22:54:17 homematic-raspi daemon.info snmpd[521]: Created directory: /var/lib/snmp/mib_indexes
Oct 17 22:54:18 homematic-raspi daemon.info snmpd[521]: Turning on AgentX master support.
Oct 17 22:54:18 homematic-raspi daemon.info snmpd[525]: NET-SNMP version 5.7.3
Oct 17 22:54:18 homematic-raspi user.info kernel: [   66.230200] eq3loop: created slave ttyS0
Oct 17 22:54:18 homematic-raspi user.info kernel: [   66.234976] eq3loop: created slave mmd_bidcos
Oct 17 22:54:22 homematic-raspi user.info kernel: [   70.669881] eq3loop: eq3loop_open_slave() mmd_bidcos
Oct 17 22:55:09 homematic-raspi user.info kernel: [  117.157403] eq3loop: eq3loop_open_slave() ttyS0
Oct 17 22:55:09 homematic-raspi user.info kernel: [  117.181174] eq3loop: eq3loop_close_slave() ttyS0
Oct 17 22:55:09 homematic-raspi user.info kernel: [  117.281788] eq3loop: eq3loop_open_slave() ttyS0
Oct 17 22:55:09 homematic-raspi user.info kernel: [  117.288538] eq3loop: eq3loop_close_slave() ttyS0
Oct 17 22:55:09 homematic-raspi user.info kernel: [  117.371038] eq3loop: eq3loop_open_slave() ttyS0
Oct 17 22:55:09 homematic-raspi user.notice kernel: [  117.379091] eq3loop: eq3loop_ioctl_slave() ttyS0: unhandled ioctl 0x5459
Oct 17 22:55:09 homematic-raspi user.notice kernel: [  117.379128] eq3loop: eq3loop_ioctl_slave() ttyS0: unhandled ioctl 0x545D
Oct 17 22:55:13 homematic-raspi cron.err crond[188]: time disparity of 25137894 minutes detected
Oct 17 22:55:26 homematic-raspi daemon.warn cuxd[472]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Oct 17 22:55:37 homematic-raspi daemon.warn cuxd[472]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Oct 17 22:55:58 homematic-raspi daemon.info cuxd[472]: INIT 'xmlrpc_bin://127.0.0.1:1999' '2162'
Oct 17 23:00:00 homematic-raspi cron.info crond[188]: USER root pid 956 cmd /bin/SetInterfaceClock 127.0.0.1:2001
Oct 17 23:00:00 homematic-raspi cron.info crond[188]: USER root pid 957 cmd /bin/setHWClock.sh
Oct 17 23:01:31 homematic-raspi daemon.notice wpa_supplicant[306]: wlan0: WPA: Group rekeying completed with 5c:49:79:46:af:29 [GTK=TKIP]
Oct 17 23:11:31 homematic-raspi daemon.notice wpa_supplicant[306]: wlan0: WPA: Group rekeying completed with 5c:49:79:46:af:29 [GTK=TKIP]

[Akwak]

Wie schon geschrieben, brachte auch ein Restart von CUxD keine Änderung. Daher habe ich den Raspberry gefrustet herunter gefahren.

Ich zitiere mal aus dem CUxD Handbuch:
Nach erfolgreicher Erstinstallation des CUxD muss die CCU nach dem Anlegen des ersten CUxD-Gerätes ein zweites Mal durchgestartet werden. Erst danach ist das CUxD-Interface vollständig betriebsbereit und kann auch Befehle von der CCU empfangen.
Wie Du schreibst hat Du nur den CUxD neu gestartet und nicht die CCU. Das reicht nicht.

Gruss
Alfred

[blackhole]

Ich packe das Thema einmal von einer anderen Seite an.

Ich bin Neuling im Thema HomeMatic. Nun habe ich heute versucht, CuxD 1.11a zu installieren.

Da CUL wohl kein Thema ist und wohl auch noch nicht gefragt wurde*, warum Du überhaupt CUxD benötigst, hole ich das hiermit einmal nach. (*Ich habe nicht alles hier im Thread gelesen.)

Ich gehe zunächst davon aus, dass Du nur meinst CUxD zu benötigen, weil hier oft fälschlicherweise proklamiert wird, dass man es für dies oder jenes (z.B. Logs, SSH, system.Exec, E-Mail, Messenger, Ping etc.pp.) benötigt.

Vielleichst erklärst Du daher einfach einmal wofür Du CUxD überhaupt verwenden möchtest.

[uwe111]

Wie schon geschrieben, brachte auch ein Restart von CUxD keine Änderung.

Oh, ich hatte angenommen, dass Du die CCU (also den Raspi) mal komplett neu gestartet hast. Wenn keine Verbindung zur ReGaHss (also der CCU Logikschicht) hergestellt wird, dann hilft ein CUxD Restart alleine nicht.

Viele Grüße

Uwe