Und zwar funktionierte ein langen Tastendruck nur einmalig, ein zweiter Versuch kommt nicht mehr an. Kurzer Tastendruck hingegen funktioniert immer.
Könnte sich mal jemand meinen CuxD Syslog anschauen ob da Fehler zu erkennen sind?
FRISCHER LOG NACH NEUSTART:
Code: Alles auswählen
Sep 24 16:16:21 ccu3-webui daemon.info cuxd[485]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:4114 update(-4780s):Mon Sep 24 14:56:41 2018
Sep 24 16:16:21 ccu3-webui daemon.info cuxd[485]: 8 device-paramset(s) loaded ok!
Sep 24 16:16:21 ccu3-webui daemon.info cuxd[485]: write_proxy /var/cache/cuxd_proxy.ini (485 /usr/local/addons/cuxd/ 2.1.0 3.37.8 0)
Sep 24 16:16:21 ccu3-webui daemon.info cuxd[485]: add interface 'CUxD'
Sep 24 16:16:21 ccu3-webui daemon.info cuxd[485]: write interface(1) 'BidCos-RF' to /usr/local/etc/config/InterfacesList.xml
Sep 24 16:16:21 ccu3-webui daemon.info cuxd[485]: write interface(2) 'VirtualDevices' to /usr/local/etc/config/InterfacesList.xml
Sep 24 16:16:21 ccu3-webui daemon.info cuxd[485]: write interface(3) 'HmIP-RF' to /usr/local/etc/config/InterfacesList.xml
Sep 24 16:16:21 ccu3-webui daemon.info cuxd[485]: write interface(4) 'CUxD' to /usr/local/etc/config/InterfacesList.xml
Sep 24 16:16:41 ccu3-webui daemon.warn cuxd[485]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Sep 24 16:16:43 ccu3-webui daemon.warn cuxd[485]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Sep 24 16:16:55 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(936) already running -> new pid!
Sep 24 16:16:55 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(938) already running -> new pid!
Sep 24 16:16:55 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(940) already running -> new pid!
Sep 24 16:17:01 ccu3-webui daemon.warn cuxd[485]: CUX9002001:1.SET_TEMPERATURE=13.500000 not set! disable USE_HMDATAPT
Sep 24 16:17:01 ccu3-webui daemon.warn cuxd[485]: CUX9002001:1.SET_HUMIDITY=58.000000 not set! disable USE_HMDATAPT
Sep 24 16:17:03 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(966) already running -> new pid!
Sep 24 16:17:03 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(968) already running -> new pid!
Sep 24 16:17:03 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(970) already running -> new pid!
Sep 24 16:17:05 ccu3-webui daemon.info cuxd[485]: INIT 'xmlrpc_bin://127.0.0.1:1999' '1436'
Sep 24 16:21:02 ccu3-webui daemon.info cuxd[1902]: system(/etc/config/addons/email/email 08) exit(1) 0s
Sep 24 16:21:05 ccu3-webui daemon.err cuxd[485]: process_getValue(CUX2802002:5.LEVEL) unknown parameter!
Sep 24 16:21:05 ccu3-webui daemon.err cuxd[485]: process_getValue(CUX2802001:5.LEVEL) unknown parameter!
Sep 24 16:25:57 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(2995) already running -> new pid!
Sep 24 16:25:57 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(2997) already running -> new pid!
Sep 24 16:25:57 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(2999) already running -> new pid!UND HIER DER FULLSYSLOG
Code: Alles auswählen
Sep 24 16:20:14 ccu3-webui daemon.info ntpd[423]: Listen normally on 7 eth0 [fe80::ba27:ebff:fe2f:81bf%2]:123
Sep 24 16:21:02 ccu3-webui user.err rfd: RFPhysicalDataInterfaceCommand::GetData SendFrame failed for LEVEL_GET
Sep 24 16:21:02 ccu3-webui user.err rfd: HSSParameter::GetValue() id=STATE failed getting physical value.
Sep 24 16:21:02 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"NEQ0957850:1","STATE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Sep 24 16:21:02 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Sep 24 16:21:02 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Sep 24 16:21:02 ccu3-webui user.err email: mkdir: can't create directory '/usr/local/etc/config/addons/email/tmp/': File exists
Sep 24 16:21:02 ccu3-webui daemon.info cuxd[1902]: system(/etc/config/addons/email/email 08) exit(1) 0s
Sep 24 16:21:02 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: var v1 = dom.GetObject("EmailEmpfaenger").Value(); var v2 = dom.GetObject("EmailBetreff").Value(); var v3 = dom.GetObject("EmailText").Value(); [iseESPexec.cpp:12575]
Sep 24 16:21:03 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: var v1 = dom.GetObject("EmailEmpfaenger").Value(); var v2 = dom.GetObject("EmailBetreff").Value(); var v3 = dom.GetObject("EmailText").Value(); [iseESPexec.cpp:12575]
Sep 24 16:21:05 ccu3-webui daemon.err cuxd[485]: process_getValue(CUX2802002:5.LEVEL) unknown parameter!
Sep 24 16:21:05 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"CUX2802002:5","LEVEL"} result= [faultCode:-4,faultString:"Unknown parameter"] [iseXmlRpc.cpp:2605]
Sep 24 16:21:05 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Sep 24 16:21:05 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Sep 24 16:21:05 ccu3-webui daemon.err cuxd[485]: process_getValue(CUX2802001:5.LEVEL) unknown parameter!
Sep 24 16:21:05 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"CUX2802001:5","LEVEL"} result= [faultCode:-4,faultString:"Unknown parameter"] [iseXmlRpc.cpp:2605]
Sep 24 16:21:05 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Sep 24 16:21:05 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Sep 24 16:21:06 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: var v1 = dom.GetObject("EmailEmpfaenger").Value(); var v2 = dom.GetObject("EmailBetreff").Value(); var v3 = dom.GetObject("EmailText").Value(); [iseESPexec.cpp:12575]
Sep 24 16:21:11 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: var v1 = dom.GetObject("EmailEmpfaenger").Value(); var v2 = dom.GetObject("EmailBetreff").Value(); var v3 = dom.GetObject("EmailText").Value(); [iseESPexec.cpp:12575]
Sep 24 16:25:57 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(2995) already running -> new pid!
Sep 24 16:25:57 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(2997) already running -> new pid!
Sep 24 16:25:57 ccu3-webui daemon.warn cuxd[485]: CUX2801001:1 [0] - pid(2999) already running -> new pid!
Sep 24 18:00:00 ccu3-webui daemon.warn cuxd[485]: CUX9002001:1.SET_TEMPERATURE=13.740000 not set! disable USE_HMDATAPT
Sep 24 18:00:00 ccu3-webui daemon.warn cuxd[485]: CUX9002001:1.SET_HUMIDITY=47.000000 not set! disable USE_HMDATAPT