Anfänger steht auf dem Schlauch :-(
Moderator: Co-Administratoren
Anfänger steht auf dem Schlauch :-(
Hi,
Bin ganz neu hier.
Zu Testzwecken habe ich versucht den CCU-Historian auf meinem ausrangierten Windows10 Rechner zum fliegen zu kriegen und mit meiner CCU3 zu verbinden.
Kriege folgenden Fehler:
2018-10-21 16:11:23|SEVERE |Exception: Configuration file ccu-historian.config is invalid
2018-10-21 16:11:23|SEVERE |Detail: java.lang.Exception: Configuration file ccu-historian.config is invalid
at mdz.ccuhistorian.Configuration.readFile(Configuration.groovy:140)
at mdz.ccuhistorian.Main.start(Main.groovy:86)
at mdz.ccuhistorian.Main.access$0(Main.groovy)
at mdz.ccuhistorian.Main$_run_closure4.doCall(Main.groovy:77)
at mdz.ccuhistorian.Main$_run_closure4.call(Main.groovy)
at mdz.Exceptions.lambda$0(Exceptions.java:84)
at mdz.Exceptions.catchToLog(Exceptions.java:74)
at mdz.Exceptions.catchToLog(Exceptions.java:84)
at mdz.ccuhistorian.Main.run(Main.groovy:77)
at mdz.ccuhistorian.Main.main(Main.groovy:45)
Caused by: groovy.lang.MissingPropertyException: No such property: CCU3 for class: Config
at Config.run(Config:60)
at mdz.ccuhistorian.Configuration.readFile(Configuration.groovy:138)
Meine config sieht so aus:
devices.device1.type=CCU3
devices.device1.address='192.168.2.95'
devices.device1.plugin1.type=CUXD
Wäre nett , wenn mir jemand vom Schlauch hilft
Bin ganz neu hier.
Zu Testzwecken habe ich versucht den CCU-Historian auf meinem ausrangierten Windows10 Rechner zum fliegen zu kriegen und mit meiner CCU3 zu verbinden.
Kriege folgenden Fehler:
2018-10-21 16:11:23|SEVERE |Exception: Configuration file ccu-historian.config is invalid
2018-10-21 16:11:23|SEVERE |Detail: java.lang.Exception: Configuration file ccu-historian.config is invalid
at mdz.ccuhistorian.Configuration.readFile(Configuration.groovy:140)
at mdz.ccuhistorian.Main.start(Main.groovy:86)
at mdz.ccuhistorian.Main.access$0(Main.groovy)
at mdz.ccuhistorian.Main$_run_closure4.doCall(Main.groovy:77)
at mdz.ccuhistorian.Main$_run_closure4.call(Main.groovy)
at mdz.Exceptions.lambda$0(Exceptions.java:84)
at mdz.Exceptions.catchToLog(Exceptions.java:74)
at mdz.Exceptions.catchToLog(Exceptions.java:84)
at mdz.ccuhistorian.Main.run(Main.groovy:77)
at mdz.ccuhistorian.Main.main(Main.groovy:45)
Caused by: groovy.lang.MissingPropertyException: No such property: CCU3 for class: Config
at Config.run(Config:60)
at mdz.ccuhistorian.Configuration.readFile(Configuration.groovy:138)
Meine config sieht so aus:
devices.device1.type=CCU3
devices.device1.address='192.168.2.95'
devices.device1.plugin1.type=CUXD
Wäre nett , wenn mir jemand vom Schlauch hilft
-
- Beiträge: 3733
- Registriert: 23.09.2017, 12:04
- Hat sich bedankt: 66 Mal
- Danksagung erhalten: 120 Mal
Re: Anfänger steht auf dem Schlauch :-(
Hallo
- zeige bitte mal das gesamte config File und kopiere das hier in Code Tags rein
- trage bitte im config File die IP ein, auf der Historian läuft
- trage bitte im config File die IP ein, auf der der Web Server läuft
- stell den Log Level für den Bildschirm auf "Finest" . Dann sollte die Zeile des config File genau ausgegeben werden, in der der Fehler ist
Meist wird die config zerschossen, weil ein ungeeigneter Windows Texteditor benutzt wird. Geeignete Tools sind einfache Text Editoren wie z.B. "Notepad++" keine Programme für Briefe wie "Word"
- zeige bitte mal das gesamte config File und kopiere das hier in Code Tags rein
- trage bitte im config File die IP ein, auf der Historian läuft
- trage bitte im config File die IP ein, auf der der Web Server läuft
- stell den Log Level für den Bildschirm auf "Finest" . Dann sollte die Zeile des config File genau ausgegeben werden, in der der Fehler ist
Meist wird die config zerschossen, weil ein ungeeigneter Windows Texteditor benutzt wird. Geeignete Tools sind einfache Text Editoren wie z.B. "Notepad++" keine Programme für Briefe wie "Word"
-
- Beiträge: 1796
- Registriert: 03.11.2010, 10:25
- System: CCU
- Wohnort: Aachen
- Hat sich bedankt: 58 Mal
- Danksagung erhalten: 262 Mal
- Kontaktdaten:
Re: Anfänger steht auf dem Schlauch :-(
Welche CCU-Historian-Version setzt Du ein?
Bitte mal in der ccu-historian.config anstatt CCU3 den Wert CCU2 setzen.
Der Wert CCU3 kann erst in der nächsten Version vom CCU-Historian verwendet werden, er ist dann identisch mit CCU2.
Gruß
Mathias
Bitte mal in der ccu-historian.config anstatt CCU3 den Wert CCU2 setzen.
Der Wert CCU3 kann erst in der nächsten Version vom CCU-Historian verwendet werden, er ist dann identisch mit CCU2.
Gruß
Mathias
Re: Anfänger steht auf dem Schlauch :-(
Hi
nach Änderung CCU3 nach CCU2 und Eintrag der IP Adressen in config file
sieht das config wie folgt aus:
devices.device1.type=CCU2
devices.device1.address='192.168.2.95'
devices.device1.plugin1.type=CUXD
devices.device1.address='192.168.2.109'
webServer.historianAddress='192.168.2.109'
die DB wurde jetzt angelegt, jetzt gibt es connect Probleme:
die ports für eingehende Verbindungen : 2011,2098,2099,8080,8081,8082 sind frei
die für ausgehende: 2001,2010, 2098,2099 auch
2018-10-21 18:02:29|INFO |Creating HM script client for http://192.168.2.109:8181/tclrega.exe
2018-10-21 18:02:29|INFO |Setting up plug-in 1
2018-10-21 18:02:29|INFO |Configured following interfaces: BidCos-RF, HmIP-RF, SysVar, CUxD
2018-10-21 18:02:29|INFO |Starting interfaces
2018-10-21 18:02:29|INFO |Starting BIN-RPC server on port 2099
2018-10-21 18:02:29|INFO |Starting XML-RPC server on port 2098
2018-10-21 18:02:29|INFO |Connecting to 192.168.2.109:2001
2018-10-21 18:02:30|INFO |Stopping BIN-RPC server on port 2099
2018-10-21 18:02:30|INFO |Stopping database
2018-10-21 18:02:30|INFO |Stopping base services
2018-10-21 18:02:30|SEVERE |Exception: Connection refused: connect
2018-10-21 18:02:30|SEVERE |Detail: java.net.ConnectException: Connection refused: connect
at mdz.hc.itf.binrpc.BinRpcClient.connect(BinRpcClient.groovy:60)
at mdz.hc.itf.binrpc.BinRpcClient.send(BinRpcClient.groovy:74)
at mdz.hc.itf.binrpc.BinRpcClient.call(BinRpcClient.groovy:142)
at mdz.hc.itf.hm.HmBinRpcInterface.init(HmBinRpcInterface.groovy:121)
at mdz.hc.itf.hm.HmBinRpcInterface.start(HmBinRpcInterface.groovy:79)
at mdz.hc.itf.Manager$_start_closure1.doCall(Manager.groovy:60)
at mdz.hc.itf.Manager.start(Manager.groovy:58)
at mdz.ccuhistorian.HistorianSystem.<init>(HistorianSystem.groovy:39)
at mdz.ccuhistorian.Main.start(Main.groovy:100)
at mdz.ccuhistorian.Main.access$0(Main.groovy)
at mdz.ccuhistorian.Main$_run_closure4.doCall(Main.groovy:77)
at mdz.ccuhistorian.Main$_run_closure4.call(Main.groovy)
at mdz.Exceptions.lambda$0(Exceptions.java:84)
at mdz.Exceptions.catchToLog(Exceptions.java:74)
at mdz.Exceptions.catchToLog(Exceptions.java:84)
at mdz.ccuhistorian.Main.run(Main.groovy:77)
at mdz.ccuhistorian.Main.main(Main.groovy:45)
nach Änderung CCU3 nach CCU2 und Eintrag der IP Adressen in config file
sieht das config wie folgt aus:
devices.device1.type=CCU2
devices.device1.address='192.168.2.95'
devices.device1.plugin1.type=CUXD
devices.device1.address='192.168.2.109'
webServer.historianAddress='192.168.2.109'
die DB wurde jetzt angelegt, jetzt gibt es connect Probleme:
die ports für eingehende Verbindungen : 2011,2098,2099,8080,8081,8082 sind frei
die für ausgehende: 2001,2010, 2098,2099 auch
2018-10-21 18:02:29|INFO |Creating HM script client for http://192.168.2.109:8181/tclrega.exe
2018-10-21 18:02:29|INFO |Setting up plug-in 1
2018-10-21 18:02:29|INFO |Configured following interfaces: BidCos-RF, HmIP-RF, SysVar, CUxD
2018-10-21 18:02:29|INFO |Starting interfaces
2018-10-21 18:02:29|INFO |Starting BIN-RPC server on port 2099
2018-10-21 18:02:29|INFO |Starting XML-RPC server on port 2098
2018-10-21 18:02:29|INFO |Connecting to 192.168.2.109:2001
2018-10-21 18:02:30|INFO |Stopping BIN-RPC server on port 2099
2018-10-21 18:02:30|INFO |Stopping database
2018-10-21 18:02:30|INFO |Stopping base services
2018-10-21 18:02:30|SEVERE |Exception: Connection refused: connect
2018-10-21 18:02:30|SEVERE |Detail: java.net.ConnectException: Connection refused: connect
at mdz.hc.itf.binrpc.BinRpcClient.connect(BinRpcClient.groovy:60)
at mdz.hc.itf.binrpc.BinRpcClient.send(BinRpcClient.groovy:74)
at mdz.hc.itf.binrpc.BinRpcClient.call(BinRpcClient.groovy:142)
at mdz.hc.itf.hm.HmBinRpcInterface.init(HmBinRpcInterface.groovy:121)
at mdz.hc.itf.hm.HmBinRpcInterface.start(HmBinRpcInterface.groovy:79)
at mdz.hc.itf.Manager$_start_closure1.doCall(Manager.groovy:60)
at mdz.hc.itf.Manager.start(Manager.groovy:58)
at mdz.ccuhistorian.HistorianSystem.<init>(HistorianSystem.groovy:39)
at mdz.ccuhistorian.Main.start(Main.groovy:100)
at mdz.ccuhistorian.Main.access$0(Main.groovy)
at mdz.ccuhistorian.Main$_run_closure4.doCall(Main.groovy:77)
at mdz.ccuhistorian.Main$_run_closure4.call(Main.groovy)
at mdz.Exceptions.lambda$0(Exceptions.java:84)
at mdz.Exceptions.catchToLog(Exceptions.java:74)
at mdz.Exceptions.catchToLog(Exceptions.java:84)
at mdz.ccuhistorian.Main.run(Main.groovy:77)
at mdz.ccuhistorian.Main.main(Main.groovy:45)
-
- Beiträge: 1203
- Registriert: 03.02.2016, 14:44
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: irgendwo aus Süd BaWü
- Hat sich bedankt: 141 Mal
- Danksagung erhalten: 85 Mal
Re: Anfänger steht auf dem Schlauch :-(
Hi,
ich hab noch den Port 9092 freigegeben. Weiß aber immo nicht mehr für genau was.
EDIT:
Aus dem Historian Handbuch:
Ich kämpfe auch jedesmal unter Windows beim einrichten.
Grüße,
Slice
ich hab noch den Port 9092 freigegeben. Weiß aber immo nicht mehr für genau was.
EDIT:
Aus dem Historian Handbuch:
Und versuch mal die Exe mit Adminrechten zu starten, Win10 könnte evtl. nen Rechteproblem haben.9092 (Optional) Netzwerk-Port für die TCP-Schnittstelle der Datenbank
database.tcpPort
Ich kämpfe auch jedesmal unter Windows beim einrichten.
Grüße,
Slice
----------------------------------------------------------------------------------------
Raspi3B+ Bullseye mit HB-RF-ETH und RPI-RF-MOD auf piVCCU-FW 3.75.7 / Addons: CuxD v2.11 - E-Mail v1.7.6 - Patcher v1.0.0 - Philips Hue v3.2.5 - Programme drucken v2.6 - Scriptparser v1.11 - XML-API v2.3
Geräte: 141 / Kanäle: 791 / Datenpunkte: 6080 / SysVars: 275 / Programme: 161 / Regadom IDs: 14010 / 48 CUxD-Kanäle in 3 CUxD-Geräten
Intel NUC i3-5010U @ 2,1 GHz mit 16 GB RAM & 512 GB SSD für Proxmox mit ioBroker VM und CCU-Historian/InfluxDB/Grafana VM
----------------------------------------------------------------------------------------
Projekte im Forum: HomeHub v4.1 / Fritzbox-Anruferliste für HomeHub
----------------------------------------------------------------------------------------
Raspi3B+ Bullseye mit HB-RF-ETH und RPI-RF-MOD auf piVCCU-FW 3.75.7 / Addons: CuxD v2.11 - E-Mail v1.7.6 - Patcher v1.0.0 - Philips Hue v3.2.5 - Programme drucken v2.6 - Scriptparser v1.11 - XML-API v2.3
Geräte: 141 / Kanäle: 791 / Datenpunkte: 6080 / SysVars: 275 / Programme: 161 / Regadom IDs: 14010 / 48 CUxD-Kanäle in 3 CUxD-Geräten
Intel NUC i3-5010U @ 2,1 GHz mit 16 GB RAM & 512 GB SSD für Proxmox mit ioBroker VM und CCU-Historian/InfluxDB/Grafana VM
----------------------------------------------------------------------------------------
Projekte im Forum: HomeHub v4.1 / Fritzbox-Anruferliste für HomeHub
----------------------------------------------------------------------------------------
-
- Beiträge: 1203
- Registriert: 03.02.2016, 14:44
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: irgendwo aus Süd BaWü
- Hat sich bedankt: 141 Mal
- Danksagung erhalten: 85 Mal
Re: Anfänger steht auf dem Schlauch :-(
Poste nochmal die komplette Konfig in Code-Tags.
Und das Log mit Loglevel finest, sollte reichen denke ich.
Sollte man ja zum laufen kriegen.
Und das Log mit Loglevel finest, sollte reichen denke ich.
Sollte man ja zum laufen kriegen.
----------------------------------------------------------------------------------------
Raspi3B+ Bullseye mit HB-RF-ETH und RPI-RF-MOD auf piVCCU-FW 3.75.7 / Addons: CuxD v2.11 - E-Mail v1.7.6 - Patcher v1.0.0 - Philips Hue v3.2.5 - Programme drucken v2.6 - Scriptparser v1.11 - XML-API v2.3
Geräte: 141 / Kanäle: 791 / Datenpunkte: 6080 / SysVars: 275 / Programme: 161 / Regadom IDs: 14010 / 48 CUxD-Kanäle in 3 CUxD-Geräten
Intel NUC i3-5010U @ 2,1 GHz mit 16 GB RAM & 512 GB SSD für Proxmox mit ioBroker VM und CCU-Historian/InfluxDB/Grafana VM
----------------------------------------------------------------------------------------
Projekte im Forum: HomeHub v4.1 / Fritzbox-Anruferliste für HomeHub
----------------------------------------------------------------------------------------
Raspi3B+ Bullseye mit HB-RF-ETH und RPI-RF-MOD auf piVCCU-FW 3.75.7 / Addons: CuxD v2.11 - E-Mail v1.7.6 - Patcher v1.0.0 - Philips Hue v3.2.5 - Programme drucken v2.6 - Scriptparser v1.11 - XML-API v2.3
Geräte: 141 / Kanäle: 791 / Datenpunkte: 6080 / SysVars: 275 / Programme: 161 / Regadom IDs: 14010 / 48 CUxD-Kanäle in 3 CUxD-Geräten
Intel NUC i3-5010U @ 2,1 GHz mit 16 GB RAM & 512 GB SSD für Proxmox mit ioBroker VM und CCU-Historian/InfluxDB/Grafana VM
----------------------------------------------------------------------------------------
Projekte im Forum: HomeHub v4.1 / Fritzbox-Anruferliste für HomeHub
----------------------------------------------------------------------------------------
Re: Anfänger steht auf dem Schlauch :-(
Ist bestimmt was Simples:
config:
devices.device1.type=CCU2
devices.device1.address='192.168.2.95'
devices.device1.plugin1.type=CUXD
devices.device1.address='192.168.2.109'
webServer.historianAddress='192.168.2.109'
2018-10-21 18:47:45|INFO |Starting base services
2018-10-21 18:47:45|INFO |Connecting to database
2018-10-21 18:47:45|INFO |Starting database web server
2018-10-21 18:47:45|INFO |Auto detected local address (please check): 192.168.2.109
2018-10-21 18:47:45|INFO |Setting up device 1
2018-10-21 18:47:45|INFO |Creating HM script client for http://192.168.2.109:8181/tclrega.exe
2018-10-21 18:47:45|INFO |Setting up plug-in 1
2018-10-21 18:47:45|INFO |Configured following interfaces: BidCos-RF, HmIP-RF, SysVar, CUxD
2018-10-21 18:47:45|INFO |Starting interfaces
2018-10-21 18:47:45|INFO |Starting BIN-RPC server on port 2099
2018-10-21 18:47:45|INFO |Starting XML-RPC server on port 2098
2018-10-21 18:47:45|INFO |Connecting to 192.168.2.109:2001
2018-10-21 18:47:46|INFO |Stopping BIN-RPC server on port 2099
2018-10-21 18:47:46|INFO |Stopping database
2018-10-21 18:47:46|INFO |Stopping base services
2018-10-21 18:47:46|SEVERE |Exception: Connection refused: connect
2018-10-21 18:47:46|SEVERE |Detail: java.net.ConnectException: Connection refused: connect
at mdz.hc.itf.binrpc.BinRpcClient.connect(BinRpcClient.groovy:60)
at mdz.hc.itf.binrpc.BinRpcClient.send(BinRpcClient.groovy:74)
at mdz.hc.itf.binrpc.BinRpcClient.call(BinRpcClient.groovy:142)
at mdz.hc.itf.hm.HmBinRpcInterface.init(HmBinRpcInterface.groovy:121)
at mdz.hc.itf.hm.HmBinRpcInterface.start(HmBinRpcInterface.groovy:79)
at mdz.hc.itf.Manager$_start_closure1.doCall(Manager.groovy:60)
at mdz.hc.itf.Manager.start(Manager.groovy:58)
at mdz.ccuhistorian.HistorianSystem.<init>(HistorianSystem.groovy:39)
at mdz.ccuhistorian.Main.start(Main.groovy:100)
at mdz.ccuhistorian.Main.access$0(Main.groovy)
at mdz.ccuhistorian.Main$_run_closure4.doCall(Main.groovy:77)
at mdz.ccuhistorian.Main$_run_closure4.call(Main.groovy)
at mdz.Exceptions.lambda$0(Exceptions.java:84)
at mdz.Exceptions.catchToLog(Exceptions.java:74)
at mdz.Exceptions.catchToLog(Exceptions.java:84)
at mdz.ccuhistorian.Main.run(Main.groovy:77)
at mdz.ccuhistorian.Main.main(Main.groovy:45)
2018-10-21 18:48:16|INFO |Starting base services
2018-10-21 18:48:16|INFO |Connecting to database
2018-10-21 18:48:16|INFO |Starting database web server
2018-10-21 18:48:16|INFO |Auto detected local address (please check): 192.168.2.109
2018-10-21 18:48:16|INFO |Setting up device 1
2018-10-21 18:48:16|INFO |Creating HM script client for http://192.168.2.109:8181/tclrega.exe
2018-10-21 18:48:16|INFO |Setting up plug-in 1
2018-10-21 18:48:16|INFO |Configured following interfaces: BidCos-RF, HmIP-RF, SysVar, CUxD
2018-10-21 18:48:16|INFO |Starting interfaces
2018-10-21 18:48:16|INFO |Starting BIN-RPC server on port 2099
2018-10-21 18:48:16|INFO |Starting XML-RPC server on port 2098
2018-10-21 18:48:16|INFO |Connecting to 192.168.2.109:2001
2018-10-21 18:48:17|INFO |Stopping BIN-RPC server on port 2099
2018-10-21 18:48:17|INFO |Stopping database
2018-10-21 18:48:17|INFO |Stopping base services
2018-10-21 18:48:17|SEVERE |Exception: Connection refused: connect
2018-10-21 18:48:17|SEVERE |Detail: java.net.ConnectException: Connection refused: connect
at mdz.hc.itf.binrpc.BinRpcClient.connect(BinRpcClient.groovy:60)
at mdz.hc.itf.binrpc.BinRpcClient.send(BinRpcClient.groovy:74)
at mdz.hc.itf.binrpc.BinRpcClient.call(BinRpcClient.groovy:142)
at mdz.hc.itf.hm.HmBinRpcInterface.init(HmBinRpcInterface.groovy:121)
at mdz.hc.itf.hm.HmBinRpcInterface.start(HmBinRpcInterface.groovy:79)
at mdz.hc.itf.Manager$_start_closure1.doCall(Manager.groovy:60)
at mdz.hc.itf.Manager.start(Manager.groovy:58)
at mdz.ccuhistorian.HistorianSystem.<init>(HistorianSystem.groovy:39)
at mdz.ccuhistorian.Main.start(Main.groovy:100)
at mdz.ccuhistorian.Main.access$0(Main.groovy)
at mdz.ccuhistorian.Main$_run_closure4.doCall(Main.groovy:77)
at mdz.ccuhistorian.Main$_run_closure4.call(Main.groovy)
at mdz.Exceptions.lambda$0(Exceptions.java:84)
at mdz.Exceptions.catchToLog(Exceptions.java:74)
at mdz.Exceptions.catchToLog(Exceptions.java:84)
at mdz.ccuhistorian.Main.run(Main.groovy:77)
at mdz.ccuhistorian.Main.main(Main.groovy:45)
config:
devices.device1.type=CCU2
devices.device1.address='192.168.2.95'
devices.device1.plugin1.type=CUXD
devices.device1.address='192.168.2.109'
webServer.historianAddress='192.168.2.109'
2018-10-21 18:47:45|INFO |Starting base services
2018-10-21 18:47:45|INFO |Connecting to database
2018-10-21 18:47:45|INFO |Starting database web server
2018-10-21 18:47:45|INFO |Auto detected local address (please check): 192.168.2.109
2018-10-21 18:47:45|INFO |Setting up device 1
2018-10-21 18:47:45|INFO |Creating HM script client for http://192.168.2.109:8181/tclrega.exe
2018-10-21 18:47:45|INFO |Setting up plug-in 1
2018-10-21 18:47:45|INFO |Configured following interfaces: BidCos-RF, HmIP-RF, SysVar, CUxD
2018-10-21 18:47:45|INFO |Starting interfaces
2018-10-21 18:47:45|INFO |Starting BIN-RPC server on port 2099
2018-10-21 18:47:45|INFO |Starting XML-RPC server on port 2098
2018-10-21 18:47:45|INFO |Connecting to 192.168.2.109:2001
2018-10-21 18:47:46|INFO |Stopping BIN-RPC server on port 2099
2018-10-21 18:47:46|INFO |Stopping database
2018-10-21 18:47:46|INFO |Stopping base services
2018-10-21 18:47:46|SEVERE |Exception: Connection refused: connect
2018-10-21 18:47:46|SEVERE |Detail: java.net.ConnectException: Connection refused: connect
at mdz.hc.itf.binrpc.BinRpcClient.connect(BinRpcClient.groovy:60)
at mdz.hc.itf.binrpc.BinRpcClient.send(BinRpcClient.groovy:74)
at mdz.hc.itf.binrpc.BinRpcClient.call(BinRpcClient.groovy:142)
at mdz.hc.itf.hm.HmBinRpcInterface.init(HmBinRpcInterface.groovy:121)
at mdz.hc.itf.hm.HmBinRpcInterface.start(HmBinRpcInterface.groovy:79)
at mdz.hc.itf.Manager$_start_closure1.doCall(Manager.groovy:60)
at mdz.hc.itf.Manager.start(Manager.groovy:58)
at mdz.ccuhistorian.HistorianSystem.<init>(HistorianSystem.groovy:39)
at mdz.ccuhistorian.Main.start(Main.groovy:100)
at mdz.ccuhistorian.Main.access$0(Main.groovy)
at mdz.ccuhistorian.Main$_run_closure4.doCall(Main.groovy:77)
at mdz.ccuhistorian.Main$_run_closure4.call(Main.groovy)
at mdz.Exceptions.lambda$0(Exceptions.java:84)
at mdz.Exceptions.catchToLog(Exceptions.java:74)
at mdz.Exceptions.catchToLog(Exceptions.java:84)
at mdz.ccuhistorian.Main.run(Main.groovy:77)
at mdz.ccuhistorian.Main.main(Main.groovy:45)
2018-10-21 18:48:16|INFO |Starting base services
2018-10-21 18:48:16|INFO |Connecting to database
2018-10-21 18:48:16|INFO |Starting database web server
2018-10-21 18:48:16|INFO |Auto detected local address (please check): 192.168.2.109
2018-10-21 18:48:16|INFO |Setting up device 1
2018-10-21 18:48:16|INFO |Creating HM script client for http://192.168.2.109:8181/tclrega.exe
2018-10-21 18:48:16|INFO |Setting up plug-in 1
2018-10-21 18:48:16|INFO |Configured following interfaces: BidCos-RF, HmIP-RF, SysVar, CUxD
2018-10-21 18:48:16|INFO |Starting interfaces
2018-10-21 18:48:16|INFO |Starting BIN-RPC server on port 2099
2018-10-21 18:48:16|INFO |Starting XML-RPC server on port 2098
2018-10-21 18:48:16|INFO |Connecting to 192.168.2.109:2001
2018-10-21 18:48:17|INFO |Stopping BIN-RPC server on port 2099
2018-10-21 18:48:17|INFO |Stopping database
2018-10-21 18:48:17|INFO |Stopping base services
2018-10-21 18:48:17|SEVERE |Exception: Connection refused: connect
2018-10-21 18:48:17|SEVERE |Detail: java.net.ConnectException: Connection refused: connect
at mdz.hc.itf.binrpc.BinRpcClient.connect(BinRpcClient.groovy:60)
at mdz.hc.itf.binrpc.BinRpcClient.send(BinRpcClient.groovy:74)
at mdz.hc.itf.binrpc.BinRpcClient.call(BinRpcClient.groovy:142)
at mdz.hc.itf.hm.HmBinRpcInterface.init(HmBinRpcInterface.groovy:121)
at mdz.hc.itf.hm.HmBinRpcInterface.start(HmBinRpcInterface.groovy:79)
at mdz.hc.itf.Manager$_start_closure1.doCall(Manager.groovy:60)
at mdz.hc.itf.Manager.start(Manager.groovy:58)
at mdz.ccuhistorian.HistorianSystem.<init>(HistorianSystem.groovy:39)
at mdz.ccuhistorian.Main.start(Main.groovy:100)
at mdz.ccuhistorian.Main.access$0(Main.groovy)
at mdz.ccuhistorian.Main$_run_closure4.doCall(Main.groovy:77)
at mdz.ccuhistorian.Main$_run_closure4.call(Main.groovy)
at mdz.Exceptions.lambda$0(Exceptions.java:84)
at mdz.Exceptions.catchToLog(Exceptions.java:74)
at mdz.Exceptions.catchToLog(Exceptions.java:84)
at mdz.ccuhistorian.Main.run(Main.groovy:77)
at mdz.ccuhistorian.Main.main(Main.groovy:45)
Re: Anfänger steht auf dem Schlauch :-(
eingehende Ports:
2011, 2098, 2099, 8081, 8080, 8082, 9092
ausgehende:
2000, 2001, 2002, 2010, 2098, 2099, 8181, 8701
2011, 2098, 2099, 8081, 8080, 8082, 9092
ausgehende:
2000, 2001, 2002, 2010, 2098, 2099, 8181, 8701