RPi2 - Homebridge : Siri for the rest of us
Moderator: Co-Administratoren
-
- Beiträge: 61
- Registriert: 01.05.2016, 11:57
Re: RPi2 - Homebridge : Siri for the rest of us
Das kuck ich mir mal an. Vier Augen sehen besser als zwei
Gesendet von iPhone mit Tapatalk
Gesendet von iPhone mit Tapatalk
Re: RPi2 - Homebridge : Siri for the rest of us
Brachte leider keinen Erfolg node v4 Installation ist durchgelaufen.thkl hat geschrieben:Versuch mal node manuell zu installerenflumi1234 hat geschrieben: Hier der Code von der installation:Code: Alles auswählen
## You appear to be running on ARMv6 hardware. Unfortunately this is not currently supported by the NodeSource Linux distributions. Please use the 'linux-armv6l' binary tarballs available directly from nodejs.org for Node.js v4 and later.
dann noch mal das autosetup durchführen damit der Rest installiert wird. Sollte klappen ...Code: Alles auswählen
cd /home/pi/ wget https://nodejs.org/dist/v4.0.0/node-v4.0.0-linux-armv7l.tar.gz tar -xvf node-v4.0.0-linux-armv7l.tar.gz cd node-v4.0.0-linux-armv7l sudo cp -R * /usr/local/
Jedoch immer noch der gleiche Fehler wie davor.
Liebe Grüße
Philipp
RPi2 - Homebridge : Siri for the rest of us
Ja die Fehlermeldung mit dem Debian Node Paket bleibt aber npm sollte gehen
Probier mal sudo npm -G homebridge
Und dann sudo npm -G homebridge-homematic
Wenn das durchläuft musst du nur noch die config.json manuell erzeugen.
Probier mal sudo npm -G homebridge
Und dann sudo npm -G homebridge-homematic
Wenn das durchläuft musst du nur noch die config.json manuell erzeugen.
Gruß Thomas
- sent from my dishwasher -
- Head of HomeControl for iOS -
- Steuerung der CCU über HomeKit (Siri) -
- Homematic Interface Layer - baut alles was HTTP kann in die CCU, ja auch Alexa-
- sent from my dishwasher -
- Head of HomeControl for iOS -
- Steuerung der CCU über HomeKit (Siri) -
- Homematic Interface Layer - baut alles was HTTP kann in die CCU, ja auch Alexa-
Re: RPi2 - Homebridge : Siri for the rest of us
Bei diesen beiden befehlen tut sich garnichts!
Habe jetzt nochmal alles mit neuem Jessi Image gemacht!
Schritte:
- Expand Filesystem ausgeführt in
- Node v4 Manuell installiert mit
- Homebridge-Paket mit folgendem Befehl installiert
Nach diesen Schritten:
Vielleicht vergesse ich auch einen Schritt?
Gruß Philipp
Habe jetzt nochmal alles mit neuem Jessi Image gemacht!
Schritte:
- Expand Filesystem ausgeführt in
Code: Alles auswählen
sudo raspi-config
Code: Alles auswählen
cd /home/pi/
wget https://nodejs.org/dist/v4.0.0/node-v4.0.0-linux-armv7l.tar.gz
tar -xvf node-v4.0.0-linux-armv7l.tar.gz
cd node-v4.0.0-linux-armv7l
sudo cp -R * /usr/local/
Code: Alles auswählen
wget -nv -O- https://raw.githubusercontent.com/thkl/homebridge/xmlrpc/setup.sh | bash -
Code: Alles auswählen
pi@raspberrypi:~ $ homebridge
-bash: homebridge: command not found
pi@raspberrypi:~ $ sudo /etc/init.d/homebridge start
Starting homebridge
Unable to start, see /var/log/homebridge.log and /var/log/homebridge.err
Gruß Philipp
Re: RPi2 - Homebridge : Siri for the rest of us
Nein , kein Schritt vergessen ...
Ich habe das Setup noch mal angepasst, das auf einem nicht armv7 System node aus dem tar installiert wird.
Würdest Du bitte noch mal das autosetup probieren.
Ich habe das Setup noch mal angepasst, das auf einem nicht armv7 System node aus dem tar installiert wird.
Würdest Du bitte noch mal das autosetup probieren.
Gruß Thomas
- sent from my dishwasher -
- Head of HomeControl for iOS -
- Steuerung der CCU über HomeKit (Siri) -
- Homematic Interface Layer - baut alles was HTTP kann in die CCU, ja auch Alexa-
- sent from my dishwasher -
- Head of HomeControl for iOS -
- Steuerung der CCU über HomeKit (Siri) -
- Homematic Interface Layer - baut alles was HTTP kann in die CCU, ja auch Alexa-
Re: RPi2 - Homebridge : Siri for the rest of us
Code: Alles auswählen
pi@raspberrypi:~ $ wget -nv -O- https://raw.githubusercontent.com/thkl/homebridge/xmlrpc/setup.sh | bash -
2016-08-15 15:07:50 URL:https://raw.githubusercontent.com/thkl/homebridge/xmlrpc/setup.sh [3689/3689] -> "-" [1]
Installing Zeroconf
install libavahi-compat-libdnssd-dev
install git
Installing node
Cleaning ...
Installing Homebridge Node Modules
mkdir: cannot create directory ‘/home/pi/.homebridge’: File exists
Setup for Homematic
--2016-08-15 15:08:36-- https://raw.githubusercontent.com/thkl/homebridge/xmlrpc/homebridge
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.12.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.12.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2018 (2.0K) [text/plain]
Saving to: ‘homebridge’
homebridge 100%[================================================================================================>] 1.97K --.-KB/s in 0.001s
2016-08-15 15:08:37 (2.34 MB/s) - ‘homebridge’ saved [2018/2018]
127.0.0.1 Homebridge
Done. If there are no error messages you are done.
Your config.json is here : /home/pi/.homebridge/config.json
If you want to install more modules use npm install -G MODULENAME
Available Modules are here https://www.npmjs.com/browse/keyword/homebridge-plugin
Please navigate to https://github.com/nfarina/homebridge for more informations.
Start the Homebridge by typing homebridge
Soll ich testweise nochmal neu aufsetzen oder liegt es an was anderem?
Re: RPi2 - Homebridge : Siri for the rest of us
Aber da sind doch jetzt keine Fehlermeldungen mehr. Das er die Config nicht schreiben kann weil sie bereits existiert ok.
homebridge als Kommando sollte jetzt aber funktionieren ...
homebridge als Kommando sollte jetzt aber funktionieren ...
Gruß Thomas
- sent from my dishwasher -
- Head of HomeControl for iOS -
- Steuerung der CCU über HomeKit (Siri) -
- Homematic Interface Layer - baut alles was HTTP kann in die CCU, ja auch Alexa-
- sent from my dishwasher -
- Head of HomeControl for iOS -
- Steuerung der CCU über HomeKit (Siri) -
- Homematic Interface Layer - baut alles was HTTP kann in die CCU, ja auch Alexa-
-
- Beiträge: 61
- Registriert: 01.05.2016, 11:57
Re: RPi2 - Homebridge : Siri for the rest of us
Was steht denn im
VAR/log/homebridge.log und err??
Gesendet von iPhone mit Tapatalk
VAR/log/homebridge.log und err??
Gesendet von iPhone mit Tapatalk
Re: RPi2 - Homebridge : Siri for the rest of us
/var/log/homebridge.log
ist leer
/var/log/homebridge.err
ist leer
/var/log/homebridge.err
Code: Alles auswählen
sudo: homebridge: command not found
sudo: homebridge: command not found
-
- Beiträge: 61
- Registriert: 01.05.2016, 11:57
Re: RPi2 - Homebridge : Siri for the rest of us
Wie versuchst du sie zu starten?
Als pi angemeldet?
Gesendet von iPhone mit Tapatalk
Als pi angemeldet?
Gesendet von iPhone mit Tapatalk