Habe vor kurzem ein HM-Dis-WM55 Display gekauft und bekomme dies nicht zu laufen
Könnte mir evtl. jmd helfen?
Danke
Ich würde gerne den Status der Fenster/Türen (sind alle im Gewerk Verschluss), Aussentemperatur, den Status der Lichter
und den Alarm anzeigen
Habe versucht das tolle Beispiel-Skript anzupassen, doch leider ohne Erfolg
Mein Skript sieht wie folgt aus:
Code: Alles auswählen
! ### Homatic-Statusanzeige HM-Dis-WM55 ####
! ### Stausanzeige 2 , Vers. 1.0;
! ### Anzeige der Zysternen Füllstand, Zysternen Filter stand, Außentemperatur, Status der Türen, Fenster und Lichter
!! Universalprogramm zum Füllen
!! (c) DrTob
!! optimized by thkl
!! changed by wortmann30
!! Das Script holt sich jetzt die Seriennummer des Displays selbst aus der Auslösebedinung des Programms
! Farben
! 0x80 weiß
! 0x81 rot
! 0x82 orange
! 0x83 gelb
! 0x84 gruen
! 0x85 blau
! Symbole
! 0x80 AUS
! 0x81 EIN
! 0x82 OFFEN
! 0x83 geschlossen
! 0x84 fehler
! 0x85 alles ok
! 0x86 information
! 0x87 neue nachricht
! 0x88 servicemeldung
! 0x89 Signal grün
! 0x8A Signal gelb
! 0x8B Signal rot
! Zugriff auf vordefinierte Texte
!
! 0x80 Text 0 (Kanal 1 Text Zeile 1)
! 0x81 Text 1 (Kanal 1 Text Zeile 2)
! 0x82 Text 2 (Kanal 2 Text Zeile 3)
! 0x83 Text 3 (Kanal 2 Text Zeile 4)
! 0x84 Text 4 (Kanal 3 Text Zeile 5)
! 0x85 Text 5 (Kanal 3 Text Zeile 6)
! 0x86 Text 6 (Kanal 4 Text Zeile 7)
! 0x87 Text 7 (Kanal 4 Text Zeile 8)
! 0x88 Text 8 (Kanal 5 Text Zeile 9)
! 0x89 Text 9 (Kanal 5 Text Zeile 10)
! 0x8A Text 10 (Kanal 6 Text Zeile 11)
! 0x8B Text 11 (Kanal 6 Text Zeile 12)
! 0x8C Text 12 (Kanal 7 Text Zeile 13)
! 0x8D Text 13 (Kanal 7 Text Zeile 14)
! 0x8E Text 14 (Kanal 8 Text Zeile 15)
! 0x8F Text 15 (Kanal 8 Text Zeile 16)
! 0x90 Text 16 (Kanal 9 Text Zeile 17)
! 0x91 Text 17 (Kanal 9 Text Zeile 18)
! 0x92 Text 18 (Kanal 10 Text Zeile 19)
! 0x93 Text 19 (Kanal 10 Text Zeile 20)
string zeile1 = "Zeile 1";
string color1 = "0x80";
string icon1 = "";
string zeile2 = "Zeile 2";
string color2 = "0x80";
string icon2 = "";
string zeile3 = "Zeile 3";
string color3 = "0x80";
string icon3 = "";
string zeile4 = "Zeile 4";
string color4 = "0x80";
string icon4 = "";
string zeile5 = "Zeile 5";
string color5 = "0x80";
string icon5 = "";
string zeile6 = "Zeile 6";
string color6 = "0x80";
string icon6 = "";
! --------- Anfang Ermitteln der Systemzustände und Zuweisung zu den einzelnen Zeilen -------------
! #### Alle Fenster zu ? #######
! ## Einlesen der Sys-Var Fenster Gewerk Verschluss
var oSysvar = dom.GetObject("Verschluss");
if (oSysvar.State()==1){
! ## Kanal : HM-Dis-WM55 :1 -> Text Zeile 1 , Textfarbe Weiß, Icon geschlossen
zeile1 = "Fenster/Tuere";
icon1 = "0x83";
color1="0x84";
}
else
{
! ## Kanal : HM-Dis-WM55 :1 -> Text Zeile 1 , Textfarbe Rot, Icon OFFEN
zeile1 = "Fenster/Tuere";
color1 = "0x81";
icon1 = "0x82";
}
! #### Alle Lichter aus ? #######
! ## Einlesen der Sys-Var Licht
var oSysvar = dom.GetObject("Licht");
if (oSysvar.State()==0){
! ## Kanal : HM-Dis-WM55 :1 -> Text Zeile 2 , Textfarbe Grün, Icon AUS
zeile2 = "Licht";
icon2 = "0x80";
color2="0x84";
}
else
{
! ## Kanal : HM-Dis-WM55 :1 -> Text Zeile 2 , Textfarbe Rot, Icon EIN
zeile2 = "Licht";
color2 = "0x81";
icon2 = "0x81";
}
! ## Außentemperatur
var term="LEQ0099367";
var channel=dom.GetObject("BidCos-RF."#term#":1.TEMPERATURE");
var temp = channel.Value();
if (temp > -10.0)
{ temp = temp.ToString(1);
zeile3 = "Außen "#temp#" C";
}
else
{ temp = temp.ToString(1);
zeile3 = "Außen"#temp#" C";
}
color3 = "0x85";
icon3 = "0x86";
!##Alarm
zeile4 ="Alarm";
color4 = "0x82";
icon4 = "0x86";
zeile5 = dom.Variable("Alarm");
color5 = "0x82";
icon5 = "0x86";
var oSysvar = dom.Variable("Alarm");
if (oSysvar.State() == true){
! ## Kanal : HM-Dis-WM55 :1 -> Text Zeile 6 , Textfarbe Weiß, Icon Ok
zeile6 = "An/Scharf";
icon6= "0x85";
color6="0x84";
}
else
{
! ## Kanal : HM-Dis-WM55 :1 -> Text Zeile 6 , Textfarbe Rot, Icon Signal Rot
zeile6 = "Aus";
color6 = "0x81";
icon6 = "0x8B";
}
! --------- Ende Ermitteln der Systemzustände und Zuweisung zu den einzelnen Zeilen -------------
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! System Routine do not change anything below !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
string splitter="|";
string msgBuffer = zeile1 # splitter # color1 # splitter # icon1 # "\t";
msgBuffer = msgBuffer # zeile2 # splitter # color2 # splitter # icon2 # "\t";
msgBuffer = msgBuffer # zeile3 # splitter # color3 # splitter # icon3 # "\t";
msgBuffer = msgBuffer # zeile4 # splitter # color4 # splitter # icon4 # "\t";
msgBuffer = msgBuffer # zeile5 # splitter # color5 # splitter # icon5 # "\t";
msgBuffer = msgBuffer # zeile6 # splitter # color6 # splitter # icon6;
string substitutions = "A,0x41\tB,0x42\tC,0x43\tD,0x44\tE,0x45\tF,0x46\tG,0x47\tH,0x48\tI,0x49\tJ,0x4A\tK,0x4B\tL,0x4C\tM,0x4D\tN,0x4E
\tO,0x4F\tP,0x50\tQ,0x51\tR,0x52\tS,0x53\tT,0x54\tU,0x55\tV,0x56\tW,0x57\tX,0x58\tY,0x59\tZ,0x5A";
substitutions = substitutions # "\ta,0x61\tb,0x62\tc,0x63\td,0x64\te,0x65\tf,0x66\tg,0x67\th,0x68\ti,0x69\tj,0x6A\tk,0x6B\tl,0x6C\tm,0x6D
\tn,0x6E\to,0x6F\tp,0x70\tq,0x71\tr,0x72\ts,0x73\tt,0x74\tu,0x75\tv,0x76\tw,0x77\tx,0x78\ty,0x79\tz,0x7A";
substitutions = substitutions # "\t0,0x30\t1,0x31\t2,0x32\t3,0x33\t4,0x34\t5,0x35\t6,0x36\t7,0x37\t8,0x38\t9,0x39\t ,0x20\t!,0x21\t\",0x22\t
%,0x25\t&,0x26\t=,0x27\t(,0x28\t),0x29\t*,0x2A\t+,0x2B\t,,0x2C\t-,0x2D\t.,0x2E\t/,0x2F";
substitutions = substitutions # "\tÄ,0x5B\tÖ,0x23\tÜ,0x24\tä,0x7B\tö,0x7C\tü,0x7D\tß,0x5F\t:,0x3A\t;,0x3B\t@,0x40\t>,0x3E";
string bufferLine;
string substEntry;
integer i;
string char;
string line;
string icon;
string command = "0x02";
foreach(bufferLine, msgBuffer) {
line = bufferLine.StrValueByIndex(splitter, 0);
icon = bufferLine.StrValueByIndex(splitter, 2);
if ((line <> "") || (icon <> "")) {
command = command # ",0x12";
if ((line.Substr(0,2) == "0x") && (line.Length() == 4)) {
command = command # "," # line;
i = 12;
}
else {
i = 0;
}
while ((i < line.Length()) && (i < 12)) {
char = line.Substr(i, 1);
foreach(substEntry, substitutions){
if (char == substEntry.Substr(0,1)){command = command # substEntry.Substr(1,5);}
}
i = i + 1;
}
command = command # ",0x11," # bufferLine.StrValueByIndex(splitter, 1);
if (icon <> "") {
command = command # ",0x13," # icon;
}
}
command = command # ",0x0A";
}
command = command # ",0x03";
dom.GetObject("BidCos-RF." # dom.GetObject("$src$").Name().StrValueByIndex(".",1) # ".SUBMIT").State(command);
! ##### FERTIG #####
Bekomme leider immer die Meldung "Keine Daten empfangen" (siehe Bild) wenn ich eine Taste drücke