[gelöst] homepilot Adapter, selber machen?

WebUIs (DashUI, yahui, ...), Adapter (Hue, IRTrans, Sonos, ...), Logging, Scripting

Moderator: Co-Administratoren

pustekuchen
Beiträge: 86
Registriert: 27.02.2013, 18:13

[gelöst] homepilot Adapter, selber machen?

Beitrag von pustekuchen » 27.05.2014, 01:53

Hallo zusammen!

Ich wohne in einem Mietshaus und habe in den letzten Jahren damit begonnen, das alte Haus zu automatisieren. Allerdings so, dass alles reversibel eingebaut wird, um bei einem eventuellen Auszug zu einem späteren Zeitpunkt alles ohne Spuren wieder ausbauen zu können. Damals wollte ich nur die Rolläden motorisieren. Ich entschied mich für die Gurtwickler der Firma Rademacher mit ihren Duofern Rollotrons. Diese sind per Funk steuerbar und auch weitere Geräte wie Funkzwischenstecker, Dimmer, etc sind verfügbar. Dann kam die Zentraleinheit "Homepilot" heraus (welche ich mir anschaffte) und mit dieser steuere ich seitdem sämtliche Rolläden im Haus).
Kurze Zeit später kam ich dann auf den Geschmack mit der Homematic. Mithilfe von Homematic habe ich z.B. die komplette Heizungssteuerung im Haus umgesetzt.
So, und jetzt habe ich gesehen, wie toll es doch aussehen könnte, wenn man alle Systeme im Dashui mit CCU.IO fernsteuern könnte. Wer von euch hätte denn Interesse an einem homepilot-Adapter für CCU.IO? Ich habe mir auch schon überlegt, für jeden Rollo ein eigenes CuxD-Gerät anzulegen, allerdings ist das sehr mühsam für alle Funktionen.
Ich habe bei der Recherche folgendes im IP-Symcon Forum gefunden, das bei der Entwicklung eines Adapters helfen könnte:

Code: Alles auswählen

<? 

$homepilot_ip = '192.168.100.168'; 
$ROLLONR='10000'; 
$CMD = '6'; 
$POS='0'; 
/* 
verfügbare Commands 
      UP:1, 
        STOP:2, 
        DOWN:3, 
        POSITION_0:4, 
        POSITION_25:5, 
        POSITION_50:6, 
        POSITION_75:7, 
        POSITION_100:8, 
        POSITION_N:9, 
        ON:10, 
        OFF:11, 
        INCREMENT:23, 
        DECREMENT:24 
         
        POS wird nur bei Kommando '9' benötigt 
        bei den anderen Kommandos hat es aber keine Auswirkung 
         
         
         
        mit http://homepilotip/deviceajax.do?devices=1 
        bekommt man eine Deviceliste mit den Statis der Aktoren 

*/ 
$ch = curl_init('http://'.$homepilot_ip.'/deviceajax.do'); 
 curl_setopt($ch, CURLOPT_POSTFIELDS, "cid={$CMD}&did={$ROLLONR}&goto={$POS}&command=1"); 
 curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); 
  
$result =  curl_exec($ch); 

print_r (json_decode($result)); 

curl_Close($ch); 

?>


Kann mir dazu vielleicht jemand Hilfestellung geben?
Zuletzt geändert von pustekuchen am 08.08.2014, 15:05, insgesamt 3-mal geändert.
399 Kanäle in 136 Geräten (CCU2, CCU.IO auf Cubie, 2x Funk-LAN-Gateway, CUL und CUxD, DashUI, ein paar Android-Tablets, homepilot mit Rademacher Duofern Gurtwicklern)

hobbyquaker
Beiträge: 3188
Registriert: 12.07.2009, 20:01
Kontaktdaten:

Re: homepilot Adapter, selber machen?

Beitrag von hobbyquaker » 01.06.2014, 12:07

das ist auf jeden Fall mit relativ geringem Aufwand machbar, aber bei mir mangelt es gerade an der Zeit. Ist natürlich auch immer blöd einen Adapter für etwas zu bauen das man selbst nicht hat, so kann man nicht testen... Ich hoffe eher darauf dass sich jemand anderes findet der das übernimmt :)

pustekuchen
Beiträge: 86
Registriert: 27.02.2013, 18:13

Re: homepilot Adapter, selber machen?

Beitrag von pustekuchen » 02.06.2014, 01:28

Freiwillige vor! ;-)

Ich würde auch nen Amazon Gutschein springen lassen!


Gesendet von meinem iPad mit Tapatalk HD
399 Kanäle in 136 Geräten (CCU2, CCU.IO auf Cubie, 2x Funk-LAN-Gateway, CUL und CUxD, DashUI, ein paar Android-Tablets, homepilot mit Rademacher Duofern Gurtwicklern)

Benutzeravatar
Eisbaeeer
Beiträge: 325
Registriert: 23.12.2010, 20:25

Re: homepilot Adapter, selber machen?

Beitrag von Eisbaeeer » 04.06.2014, 16:50

pustekuchen hat geschrieben:Freiwillige vor! ;-)
Ich würde auch nen Amazon Gutschein springen lassen!
Gesendet von meinem iPad mit Tapatalk HD
Baust du meine Rolläden um, dann bau ich den Adapter : 8) *spaß
Ohne Rademacher Hardware wird das nicht klappen, sorry.

Gruß Eisbaeeer
CCU.IO Adapter - Lcdproc: https://github.com/Eisbaeeer/lcdproc
CCU.IO Adapter - Onkyo: https://github.com/Eisbaeeer/Onkyo
CCU.IO Adapter - OWFS-Client: https://github.com/Eisbaeeer/owfs
CCU.IO Adapter - Syr https://github.com/Eisbaeeer/syr
RaspCEC-Server: https://github.com/Eisbaeeer/RaspCEC-Server

Bluefox
Beiträge: 779
Registriert: 20.02.2011, 19:55

Re: homepilot Adapter, selber machen?

Beitrag von Bluefox » 05.06.2014, 17:31

pustekuchen hat geschrieben:Hallo zusammen!

Ich wohne derzeit in einem Mietshaus und habe in den letzten zwei Jahren damit begonnen, das alte Haus zu automatisieren. Allerdings so, dass alles reversibel eingebaut wird, um bei einem eventuellen Auszug zu einem späteren Zeitpunkt alles ohne Spuren wieder ausbauen zu können. Damals wollte ich nur die Rolläden motorisieren. Da vom Vermieter kein Interesse an einer Investition von solchen Dingen bestand, musste ich also selber eine Lösung finden. Ich entschied mich für die Gurtwickler der Firma Rademacher mit ihren Duofern Rollotrons. Diese sind per Funk steuerbar und auch weitere Geräte wie Funkzwischenstecker, Dimmer, etc sind verfügbar. Dann kam die Zentraleinheit "Homepilot" heraus (welche ich mir anschaffte) und mit dieser steuere ich seitdem sämtliche Rolläden im Haus (10 Stück).
Kurze Zeit später kam ich dann auf den Geschmack mit der Homematic. Mithilfe von Homematic habe ich z.B. die komplette Heizungssteuerung im Haus umgesetzt. Ein Logitech Sqeezebox Mediaserver installiert auf der NAS und einige Squeezebox-Radios im Haus verteilt runden das Ganze ab.
So, und jetzt habe ich gesehen, wie toll es doch aussehen könnte, wenn man alle Systeme im Dashui mit CCU.IO fernsteuern könnte. Die ersten Schritte hierzu habe ich schon gemacht. Doch leider bin ich nicht so der Programmierungsprofi, um selber Hand an den Code zu legen. Wer von euch hätte denn Interesse an einem homepilot-Adapter für CCU.IO? Ich habe mir auch schon überlegt, für jeden Rollo ein eigenes CuxD-Gerät anzulegen, allerdings ist das sehr mühsam für alle Funktionen.
Ich habe leider bei der Recherche lediglich folgendes im IP-Symcon Forum gefunden, das bei der Entwicklung eines Adapters helfen könnte:

Code: Alles auswählen

<? 

$homepilot_ip = '192.168.100.168'; 
$ROLLONR='10000'; 
$CMD = '6'; 
$POS='0'; 
/* 
verfügbare Commands 
      UP:1, 
        STOP:2, 
        DOWN:3, 
        POSITION_0:4, 
        POSITION_25:5, 
        POSITION_50:6, 
        POSITION_75:7, 
        POSITION_100:8, 
        POSITION_N:9, 
        ON:10, 
        OFF:11, 
        INCREMENT:23, 
        DECREMENT:24 
         
        POS wird nur bei Kommando '9' benötigt 
        bei den anderen Kommandos hat es aber keine Auswirkung 
         
         
         
        mit http://homepilotip/deviceajax.do?devices=1 
        bekommt man eine Deviceliste mit den Statis der Aktoren 

*/ 
$ch = curl_init('http://'.$homepilot_ip.'/deviceajax.do'); 
 curl_setopt($ch, CURLOPT_POSTFIELDS, "cid={$CMD}&did={$ROLLONR}&goto={$POS}&command=1"); 
 curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); 
  
$result =  curl_exec($ch); 

print_r (json_decode($result)); 

curl_Close($ch); 

?>


Kann mir dazu vielleicht jemand Hilfestellung geben?
Was bekommst du als Antwort auf:

http://homepilotip/deviceajax.do?devices=1

(Einfach im browser aufrufen)

pustekuchen
Beiträge: 86
Registriert: 27.02.2013, 18:13

Re: homepilot Adapter, selber machen?

Beitrag von pustekuchen » 06.06.2014, 09:42

Bluefox hat geschrieben:Was bekommst du als Antwort auf:

http://homepilotip/deviceajax.do?devices=1

(Einfach im browser aufrufen)

Code: Alles auswählen

{ "response" : "get_visible_devices", "status" : "ok", "devices" : [
{"did":10009,"name":"Gartenbeleuchtung","description":" ","initialized":1,"position":100,"productName":"Universal-Aktor","serial":"43","statusesMap":{"Position":100,"Manuellbetrieb":0},"status_changed":1401217204,"deviceGroup":1,"iconSet":{"name":"Ein-Aus-Schalter","description":"Ein- Aus-Schalter Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/ein-aus-schalter1.png", "numTiles" : 2 },"k":"iconset5"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"43 XX XX","visible":true,"groups" : [ 5003 ] ,"favoredId":5013,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":2,"dawn":3,"dust":3,"favored":0,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":0},{"cfgKey":"setEveningAuto","cfgId":107,"state":1},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":1},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":293,"sTypes":[],"version":"2.2","sync":-2147483471,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10011,"name":"Moonlights","description":" ","initialized":1,"position":0,"productName":"Universal-Aktor","serial":"43","statusesMap":{"Position":0,"Manuellbetrieb":0},"status_changed":1401180892,"deviceGroup":1,"iconSet":{"name":"Ein-Aus-Schalter","description":"Ein- Aus-Schalter Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/ein-aus-schalter1.png", "numTiles" : 2 },"k":"iconset5"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"43 XX XX","visible":true,"groups" : [ 5003 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":0},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":294,"sTypes":[],"version":"2.2","sync":-2147483485,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10012,"name":"Poolbeleucht. klein","description":" ","initialized":1,"position":0,"productName":"Universal-Aktor","serial":"43","statusesMap":{"Position":0,"Manuellbetrieb":0},"status_changed":1401180892,"deviceGroup":1,"iconSet":{"name":"Ein-Aus-Schalter","description":"Ein- Aus-Schalter Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/ein-aus-schalter1.png", "numTiles" : 2 },"k":"iconset5"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"43 XX XX","visible":true,"groups" : [ 5003 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":0},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":295,"sTypes":[],"version":"2.2","sync":-2147483485,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10010,"name":"Poolbeleuchtung","description":" ","initialized":1,"position":0,"productName":"Universal-Aktor","serial":"43","statusesMap":{"Position":0,"Manuellbetrieb":0},"status_changed":1401217204,"deviceGroup":1,"iconSet":{"name":"Ein-Aus-Schalter","description":"Ein- Aus-Schalter Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/ein-aus-schalter1.png", "numTiles" : 2 },"k":"iconset5"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"43 XX XX","visible":true,"groups" : [ 5003 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":0},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":296,"sTypes":[],"version":"2.2","sync":-2147483481,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10006,"name":"Pumpe","description":"Teichpumpe","initialized":1,"position":0,"productName":"Steckdosenaktor","serial":"46","statusesMap":{"Position":0,"Manuellbetrieb":0},"status_changed":1401206405,"deviceGroup":1,"iconSet":{"name":"Pumpe","description":"Pumpe Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/pumpe1.png", "numTiles" : 2 },"k":"iconset16"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"46 XX XX","visible":true,"groups" : [  ] ,"favoredId":5009,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":2,"dawn":3,"dust":3,"favored":0,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":0},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":297,"sTypes":[],"version":"2.0","sync":-2147483448,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10001,"name":"Rollo EG Esstisch","description":" ","initialized":1,"position":0,"productName":"RolloTron Comfort","serial":"61","statusesMap":{"Position":0,"Manuellbetrieb":0},"status_changed":1401180972,"deviceGroup":2,"iconSet":{"name":"Rollladen 2","description":"Rollladen Icon-Set mit Streben","strMin":"Auf","strMax":"Zu","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/rollladen2.png", "numTiles" : 5 },"k":"iconset15"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"61 XX XX","visible":true,"groups" : [ 5000 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":2,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":0},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":298,"sTypes":[30],"version":"0.3","sync":-2147483479,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10000,"name":"Rollo EG Küche","description":" ","initialized":1,"position":100,"productName":"RolloTron Comfort","serial":"61","statusesMap":{"Position":100,"Manuellbetrieb":0},"status_changed":1401217223,"deviceGroup":2,"iconSet":{"name":"Rollladen 2","description":"Rollladen Icon-Set mit Streben","strMin":"Auf","strMax":"Zu","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/rollladen2.png", "numTiles" : 5 },"k":"iconset15"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"61 XX XX","visible":true,"groups" : [ 5000 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":2,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":1},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":1},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":299,"sTypes":[30],"version":"0.3","sync":-2147483474,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10005,"name":"Rollo EG WoZi F1","description":"kleines Fenster (Slave)","initialized":1,"position":100,"productName":"RolloTron Standard","serial":"40","statusesMap":{"Position":100,"Manuellbetrieb":0},"status_changed":1401215426,"deviceGroup":2,"iconSet":{"name":"Rollladen 1","description":"Rollladen Icon-Set","strMin":"Auf","strMax":"Zu","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/rollladen1.png", "numTiles" : 5 },"k":"iconset8"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"40 XX XX","visible":true,"groups" : [ 5000 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":2,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":1},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":1},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":300,"sTypes":[],"version":"0.7","sync":-2147483474,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10004,"name":"Rollo EG WoZi F2","description":"grosses Fenster (Slave)","initialized":1,"position":93,"productName":"RolloTron Standard","serial":"40","statusesMap":{"Position":93,"Manuellbetrieb":0},"status_changed":1401215431,"deviceGroup":2,"iconSet":{"name":"Rollladen 1","description":"Rollladen Icon-Set","strMin":"Auf","strMax":"Zu","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/rollladen1.png", "numTiles" : 5 },"k":"iconset8"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"40 XX XX","visible":true,"groups" : [ 5000 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":2,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":1},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":1},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":301,"sTypes":[],"version":"0.7","sync":-2147483474,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10003,"name":"Rollo EG WoZi F3","description":"grosses Fenster (Master)","initialized":1,"position":100,"productName":"RolloTron Comfort","serial":"61","statusesMap":{"Position":100,"Manuellbetrieb":0},"status_changed":1401215433,"deviceGroup":2,"iconSet":{"name":"Rollladen 2","description":"Rollladen Icon-Set mit Streben","strMin":"Auf","strMax":"Zu","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/rollladen2.png", "numTiles" : 5 },"k":"iconset15"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"61 XX XX","visible":true,"groups" : [ 5000 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":2,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":1},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":1},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":302,"sTypes":[30],"version":"0.3","sync":-2147483473,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10014,"name":"Rollo EG WoZi Türe","description":" ","initialized":1,"position":0,"productName":"RolloTron Comfort","serial":"61","statusesMap":{"Position":0,"Manuellbetrieb":0},"status_changed":1401180933,"deviceGroup":2,"iconSet":{"name":"Tür","description":"Tür Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/tuer1.png", "numTiles" : 2 },"k":"iconset12"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"61 XX XX","visible":true,"groups" : [ 5000 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":2,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":1},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":1},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":303,"sTypes":[30],"version":"0.4","sync":-2147483477,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10019,"name":"Rollo OG KiZi Fenster","description":" ","initialized":1,"position":100,"productName":"RolloTron Comfort","serial":"61","statusesMap":{"Position":100,"Manuellbetrieb":0},"status_changed":1401211341,"deviceGroup":2,"iconSet":{"name":"Rollladen 2","description":"Rollladen Icon-Set mit Streben","strMin":"Auf","strMax":"Zu","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/rollladen2.png", "numTiles" : 5 },"k":"iconset15"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"61 XX XX","visible":true,"groups" : [ 5004 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":304,"sTypes":[30],"version":"1.2","sync":-2147483478,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10020,"name":"Rollo OG KiZi Türe","description":" ","initialized":1,"position":100,"productName":"RolloTron Comfort","serial":"61","statusesMap":{"Position":100,"Manuellbetrieb":0},"status_changed":1401211347,"deviceGroup":2,"iconSet":{"name":"Tür","description":"Tür Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/tuer1.png", "numTiles" : 2 },"k":"iconset12"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"61 XX XX","visible":true,"groups" : [ 5004 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":305,"sTypes":[30],"version":"1.2","sync":-2147483477,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10017,"name":"Rollo OG SZ Fenster","description":" ","initialized":1,"position":100,"productName":"RolloTron Comfort","serial":"61","statusesMap":{"Position":100,"Manuellbetrieb":0},"status_changed":1401211636,"deviceGroup":2,"iconSet":{"name":"Rollladen 2","description":"Rollladen Icon-Set mit Streben","strMin":"Auf","strMax":"Zu","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/rollladen2.png", "numTiles" : 5 },"k":"iconset15"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"61 XX XX","visible":true,"groups" : [ 5004 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":1},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":1},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":306,"sTypes":[30],"version":"0.4","sync":-2147483464,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10018,"name":"Rollo OG SZ Türe","description":" ","initialized":1,"position":100,"productName":"RolloTron Comfort","serial":"61","statusesMap":{"Position":100,"Manuellbetrieb":0},"status_changed":1401211614,"deviceGroup":2,"iconSet":{"name":"Tür","description":"Tür Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/tuer1.png", "numTiles" : 2 },"k":"iconset12"},"iconSetInverted":0,"paired":0,"statusValid":true,"uid":"61 XX XX","visible":true,"groups" : [ 5004 ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":1},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":1}]},"sortId":307,"sTypes":[30],"version":"1.2","sync":-2147483464,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10016,"name":"Test-Steckdose 2","description":" ","initialized":1,"position":-1,"productName":"Steckdosenaktor","serial":"46","statusesMap":{"Position":0,"Manuellbetrieb":0},"status_changed":-1,"deviceGroup":1,"iconSet":{"name":"Tischlampe","description":"Tischlampe Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/tischlampe1.png", "numTiles" : 5 },"k":"iconset11"},"iconSetInverted":0,"paired":0,"statusValid":false,"uid":"46 XX XX","visible":true,"groups" : [  ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":0},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":0}]},"sortId":308,"sTypes":[],"version":"","sync":-2147483488,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]},
{"did":10013,"name":"Test-Steckdose Keller","description":" ","initialized":1,"position":-1,"productName":"Steckdosenaktor","serial":"46","statusesMap":{"Position":0,"Manuellbetrieb":0},"status_changed":-1,"deviceGroup":1,"iconSet":{"name":"Steckdose","description":"Steckdose Icon-Set","strMin":"An","strMax":"Aus","valMax":100,"valMin":0,"sprite":{ "imageUri" : "images/sets/steckdose1.png", "numTiles" : 2 },"k":"iconset10"},"iconSetInverted":0,"paired":0,"statusValid":false,"uid":"46 XX XX","visible":true,"groups" : [  ] ,"favoredId":-1,"properties":{"generic":3,"wind":3,"trigger":3,"closingContact":3,"dusk":3,"smoke":3,"sun":3,"temperature":3,"manual":3,"time":3,"dawn":3,"dust":3,"favored":3,"smartphone":3,"motion":3,"temperator":3,"warning":3,"rain":3,"states":[{"cfgKey":"setSunAuto","cfgId":105,"state":0},{"cfgKey":"setEveningAuto","cfgId":107,"state":0},{"cfgKey":"setAutomationOverall","cfgId":99,"state":0},{"cfgKey":"setMorningAuto","cfgId":103,"state":0},{"cfgKey":"setTimeAuto","cfgId":101,"state":0}]},"sortId":309,"sTypes":[],"version":"","sync":-2147483488,"messages":[],"hasErrors":0,"autos":[3,2,0,1,4]}
] }
399 Kanäle in 136 Geräten (CCU2, CCU.IO auf Cubie, 2x Funk-LAN-Gateway, CUL und CUxD, DashUI, ein paar Android-Tablets, homepilot mit Rademacher Duofern Gurtwicklern)

pustekuchen
Beiträge: 86
Registriert: 27.02.2013, 18:13

Re: homepilot Adapter, selber machen?

Beitrag von pustekuchen » 07.06.2014, 01:29

Also ich kann z.B. mit folgendem Befehl eine Funksteckdose von Rademacher an- bzw. ausschalten:

Code: Alles auswählen

An:
http://homepilot-ip/deviceajax.do?cid=10&did=10009&command=1
Aus:
http://homepilot-ip/deviceajax.do?cid=11&did=10009&command=1
Dabei erhalte ich jeweils folgende Rückmeldung:

Code: Alles auswählen

{"message":"Command used:10","status":"uisuccess"}
bzw.
{"message":"Command used:11","status":"uisuccess"}
Beim Rollo geht das ähnlich mit folgendem Befehl (auf 50% Öffnung fahren):

Code: Alles auswählen

http://homepilot-ip/deviceajax.do?cid=9&did=10001&goto=6&command=1
mit folgender Rückmeldung:

Code: Alles auswählen

{"message":"Command used:9 position:6","status":"uisuccess"}
Und wieder nach oben fahren:

Code: Alles auswählen

http://homepilot-ip/deviceajax.do?cid=9&did=10001&goto=4&command=1
Rückmeldung:

Code: Alles auswählen

{"message":"Command used:9 position:4","status":"uisuccess"}
399 Kanäle in 136 Geräten (CCU2, CCU.IO auf Cubie, 2x Funk-LAN-Gateway, CUL und CUxD, DashUI, ein paar Android-Tablets, homepilot mit Rademacher Duofern Gurtwicklern)

Bluefox
Beiträge: 779
Registriert: 20.02.2011, 19:55

Re: homepilot Adapter, selber machen?

Beitrag von Bluefox » 07.06.2014, 09:08

Ich sehe, es gibt 4 Gerätetypen:

Steckdosenaktor,
Universal-Aktor,
RolloTron Comfort,
RolloTron Standard.

Mit rollotron es ist klar. Rollo von 0 bis 100.

Steckdosenaktor: Kann man damit dimmen oder nur schalten 0/100?
Gleiche Frage für Universal-Aktor. Ich will die Aktoren, die nicht gedimmt werden können mit dem Datenpunkt STATE definieren.

pustekuchen
Beiträge: 86
Registriert: 27.02.2013, 18:13

Re: homepilot Adapter, selber machen?

Beitrag von pustekuchen » 07.06.2014, 14:08

Bluefox hat geschrieben:Ich sehe, es gibt 4 Gerätetypen:

Steckdosenaktor,
Universal-Aktor,
RolloTron Comfort,
RolloTron Standard.

Mit rollotron es ist klar. Rollo von 0 bis 100.

Steckdosenaktor: Kann man damit dimmen oder nur schalten 0/100?
Gleiche Frage für Universal-Aktor. Ich will die Aktoren, die nicht gedimmt werden können mit dem Datenpunkt STATE definieren.
Verstehe, das mit dem STATE klingt gut. Es gibt auch Dimmer von Rademacher. Aber die heißen dann anders.
http://www.rademacher.de/hausautomation ... maktor-up/

Steckdosenaktor = EIN/AUS
Universal-Aktor = EIN/AUS
Universal-Dimmer = EIN/AUS/LEVEL
399 Kanäle in 136 Geräten (CCU2, CCU.IO auf Cubie, 2x Funk-LAN-Gateway, CUL und CUxD, DashUI, ein paar Android-Tablets, homepilot mit Rademacher Duofern Gurtwicklern)

Bluefox
Beiträge: 779
Registriert: 20.02.2011, 19:55

Re: homepilot Adapter, selber machen?

Beitrag von Bluefox » 07.06.2014, 15:47

Kannst du deine Steckdose so steuern?
An

Code: Alles auswählen

http://homepilot-ip/deviceajax.do?cid=9&did=10016&goto=100&command=1
Aus

Code: Alles auswählen

http://homepilot-ip/deviceajax.do?cid=9&did=10016&goto=0&command=1

Antworten

Zurück zu „CCU.IO“