HmIP-BWTH as gas boiler trigger

Support for our english speaking visitors

Moderator: Co-Administratoren

Antworten
Benutzeravatar
a_patch
Beiträge: 11
Registriert: 16.07.2018, 16:35
Wohnort: Dublin

HmIP-BWTH as gas boiler trigger

Beitrag von a_patch » 16.07.2018, 16:53

Good evening,

I was hoping to use HmIP-BWTH as direct replacement for my analogue thermostat (similar to this one: https://www.diynot.com/diy/media/untitled.52257/full). Idea was to use this thermostat with conjunction of radiator valves and RaspberryMatic, and control everything via OpenHab.

How it can be achieved? How can I replace my current boiler controller and use Homematic devices to control my heating?
Zuletzt geändert von a_patch am 14.08.2018, 17:46, insgesamt 1-mal geändert.
a_patch

Benutzeravatar
Roland M.
Beiträge: 9736
Registriert: 08.12.2012, 15:53
System: CCU
Wohnort: Graz, Österreich
Hat sich bedankt: 251 Mal
Danksagung erhalten: 1356 Mal

Re: HmIP-BWTH as gas boiler trigger

Beitrag von Roland M. » 16.07.2018, 18:20

Hello and welcome to the forum!
a_patch hat geschrieben:
16.07.2018, 16:53
I got neutral from closest light switch, but then when I did connect Load to L, neutral to N, and outgoing wire to 1, my mine fuse blows up.
I'm asking you for understanding, that we cannot and will not help in such cases.
We do not want to be complicit in hurting you, yor family or someone else.
Please do get help from an skilled professional electrican, he will certainly know after measuring, how he can solve that problem.

Thank you.


Roland
Zur leichteren Hilfestellung bitte unbedingt beachten:
  • Bezeichnung (HM-... bzw. HmIP-...) der betroffenen Geräte angeben (nicht Artikelnummer)
  • Kurzbeschreibung des Soll-Zustandes (Was soll erreicht werden?)
  • Kurzbeschreibung des Ist-Zustandes (Was funktioniert nicht?)
  • Fehlermeldungen genau abschreiben, besser noch...
  • Screenshots von Programmen, Geräteeinstellungen und Fehlermeldungen (direkt als jpg/png) einstellen!

-----------------------------------------------------------------------
1. CCU2 mit ~100 Geräten (in Umstellung auf RaspberryMatic-OVA auf Proxmox-Server)
2. CCU2 per VPN mit ~50 Geräten (geplant: RaspberryMatic auf Charly)
3. CCU2 per VPN mit ~40 Geräten (geplant: RaspberryMatic auf CCU3)
CCU1, Test-CCU2, Raspi 1 mit kleinem Funkmodul, RaspberryMatic als VM unter Proxmox, Access Point,...

Benutzeravatar
a_patch
Beiträge: 11
Registriert: 16.07.2018, 16:35
Wohnort: Dublin

Re: HmIP-BWTH as gas boiler trigger

Beitrag von a_patch » 16.07.2018, 20:56

I do understand, and I will not hesitate to ask certified electrician to connect it for me. My question was if this thermostat is right device and should work, or I need to get something different?
a_patch

Antworten

Zurück zu „HomeMatic - english“