Homematic IP HmIP-WTH-2 + HmIP-PCBS
Moderator: Co-Administratoren
Homematic IP HmIP-WTH-2 + HmIP-PCBS
Hello,
I bought "Homematic IP HmIP-WTH-2" and using it with "HmIP-SK1" and "HmIP-PCBS" which is set as "Climate Control (Switches electric radiators in combination with wall Thermostat)".
I have in menu only 3 choices: AUTO, MANU and CONNECTION. HmIP-WTH-2 is now working as remote control for HmIP-eTRV-2 but it's not switching heating on HmIP-PCB. Why?
How can I set it up to turn on HmIP-PCB, when "actual temperature" is lower than "set temperature"???
Why I don't have FULL MENU when long press wheel button???
Thank you
I bought "Homematic IP HmIP-WTH-2" and using it with "HmIP-SK1" and "HmIP-PCBS" which is set as "Climate Control (Switches electric radiators in combination with wall Thermostat)".
I have in menu only 3 choices: AUTO, MANU and CONNECTION. HmIP-WTH-2 is now working as remote control for HmIP-eTRV-2 but it's not switching heating on HmIP-PCB. Why?
How can I set it up to turn on HmIP-PCB, when "actual temperature" is lower than "set temperature"???
Why I don't have FULL MENU when long press wheel button???
Thank you
Re: Homematic IP HmIP-WTH-2 + HmIP-PCBS
Hello,
OK, so I made some tests and so far:
"HmIP-PCBS" is connected to my central Gas heating in house switching it ON/OFF.
I managed to setup every "HmIP-eTRV-2 Radiator Thermostat" to switch ON "HmIP-PCBS" when BOOST is activated on any Radiator Thermostat for 5 minutes via AUTOMATION MENU. The problem is that there is no value ACTUAL TEMPERATURE in TEMPERATURE conditions.
"Homematic IP HmIP-WTH-2" wall thermostat is switching ON/OFF "HmIP-PCBS" when assigned in the SAME room.
My problem is that I want to have Wall thermostat in every room and always switch the same "HmIP-PCBS" which is connected to my central Gas heating in house.
Thank you
OK, so I made some tests and so far:
"HmIP-PCBS" is connected to my central Gas heating in house switching it ON/OFF.
I managed to setup every "HmIP-eTRV-2 Radiator Thermostat" to switch ON "HmIP-PCBS" when BOOST is activated on any Radiator Thermostat for 5 minutes via AUTOMATION MENU. The problem is that there is no value ACTUAL TEMPERATURE in TEMPERATURE conditions.
"Homematic IP HmIP-WTH-2" wall thermostat is switching ON/OFF "HmIP-PCBS" when assigned in the SAME room.
My problem is that I want to have Wall thermostat in every room and always switch the same "HmIP-PCBS" which is connected to my central Gas heating in house.
Thank you
-
- Beiträge: 1152
- Registriert: 30.11.2013, 16:35
- Wohnort: Mordor
- Hat sich bedankt: 23 Mal
- Danksagung erhalten: 56 Mal
Re: Homematic IP HmIP-WTH-2 + HmIP-PCBS
Hi seikino,
I'm using the Homematic CCU2 and not the Homematic IP Access Point but hope this will help.
1. If you also use the CCU2 (or Raspi) as your central than it can be done easily.
2. If you use Homematic IP Access Point - you wrote that you tried the new Automation rules in the app. They work like IFTTT - but this room thing I don't know because CCU2 don't have such limits.
3. What you should study anyway is the new Homematic IP User Guide PDF in English - it describes in details most possible scenarios:
http://www.eq-3.com/service/downloads.h ... &pid=16518
I'm using the Homematic CCU2 and not the Homematic IP Access Point but hope this will help.
1. If you also use the CCU2 (or Raspi) as your central than it can be done easily.
2. If you use Homematic IP Access Point - you wrote that you tried the new Automation rules in the app. They work like IFTTT - but this room thing I don't know because CCU2 don't have such limits.
3. What you should study anyway is the new Homematic IP User Guide PDF in English - it describes in details most possible scenarios:
http://www.eq-3.com/service/downloads.h ... &pid=16518
Re: Homematic IP HmIP-WTH-2 + HmIP-PCBS
I contacted Homematic official support, and it's not possible to use HmIP-PCBS as cenral heating switch as it must be ALWAYS assigned to room. So right now I can only control it from 1 Thermostat. If I want to work Thermostats from more rooms I will need HmIP-MIOB or HmIP-WHS2. I will wait until HmIP-WHS2 will be released in couple weeks and change if for HmIP-PCBS. Then I will use HmIP-PCBS for opening my garage doors.
-
- Beiträge: 97
- Registriert: 01.11.2017, 18:28
- Wohnort: Estonia
- Hat sich bedankt: 3 Mal
- Danksagung erhalten: 9 Mal
Re: Homematic IP HmIP-WTH-2 + HmIP-PCBS
Hi, have you tried with new device? I seem to stack by same/similar obstacle... viewtopic.php?f=49&t=46514
Please share your experience
Re: Homematic IP HmIP-WTH-2 + HmIP-PCBS
I didn't find HmIP-WHS2 on Amazon, so I didn't buy it yet. Do you have HmIP-WHS2 ?
So far I'm OK with simple solution, so I only controll gas heater paired with my Thermostat in bedroom.
So far I'm OK with simple solution, so I only controll gas heater paired with my Thermostat in bedroom.
-
- Beiträge: 97
- Registriert: 01.11.2017, 18:28
- Wohnort: Estonia
- Hat sich bedankt: 3 Mal
- Danksagung erhalten: 9 Mal
Re: Homematic IP HmIP-WTH-2 + HmIP-PCBS
Ordered from ELV.de https://www.elv.de/homematic-ip-2-fach- ... lagen.html, together with other stuff, with delivery timeline to 45 days. But they sent something last week. Should arrive on this Thursday, will publish findings, once available.
-
- Beiträge: 97
- Registriert: 01.11.2017, 18:28
- Wohnort: Estonia
- Hat sich bedankt: 3 Mal
- Danksagung erhalten: 9 Mal
Re: Homematic IP HmIP-WTH-2 + HmIP-PCBS
Positive updates (so far) on my game with HmIP-WHS2 viewtopic.php?f=49&t=46514&p=491020#p491020