Homematic (IP) @ Raspberry PI - RaspberryMatic or piVCCU English

Support for our english speaking visitors

Moderator: Co-Administratoren

Antworten
tomi_cc16
Beiträge: 686
Registriert: 30.11.2013, 16:35
Wohnort: Mordor

Homematic (IP) @ Raspberry PI - RaspberryMatic or piVCCU English

Beitrag von tomi_cc16 » 26.06.2017, 18:10

To have also an English site for this if someone wants to comment.

Build your own CCU3 for Homematic and Homematic IP protocol on Raspberry PI or Tinkerboard:

• RaspberryPi3 Model B
• RaspberryPi2 Model B
• RaspberryPi Compute Module 3
• RaspberryPi Compute Module 3 lite
• RaspberryPi Zero W
• RaspberryPi Zero
• RaspberryPi Compute Module 1
• RaspberryPi1 Model B+ or Model B, 512MB
• RaspberryPi1 Model A+ or Model A, 256MB
• ASUS Tinkerboard

RaspberryMatic
https://github.com/jens-maus/RaspberryMatic
Discuss RaspberryMatic here in the Forum: (use Chrome to translate the page)
viewtopic.php?f=65&t=26917

*NEW* piVCCU
https://github.com/alexreinert/piVCCU/
piVCCU is a project to install the original Homematic CCU2 or CCU3 firmware inside a virtualized container (lxc) on ARM based single board computers.

Homematic Link Collection for Beginners (read it !! it's in German but so important - use Chrome to translate the page)
viewtopic.php?f=19&t=22801
Zuletzt geändert von tomi_cc16 am 15.10.2018, 12:11, insgesamt 5-mal geändert.

blueznl
Beiträge: 80
Registriert: 29.11.2014, 18:09

Re: EN Homematic @ Raspberry PI - RaspberryMatic

Beitrag von blueznl » 15.11.2017, 18:32

Thanks. I'm reading through your posts, and it is interesting... It takes me quite some extra time to figure it out as I am not a native German speaker.

Thanks for posting the link and pointing it out.

tomi_cc16
Beiträge: 686
Registriert: 30.11.2013, 16:35
Wohnort: Mordor

Re: Homematic (IP) @ Raspberry PI - RaspberryMatic or piVCCU English

Beitrag von tomi_cc16 » 15.10.2018, 12:06

Both now running with the latest CCU3 firmware so they will work also in the future :-)

Antworten

Zurück zu „HomeMatic - english“