Logging data

Support for our english speaking visitors

Moderator: Co-Administratoren

Antworten
blueznl
Beiträge: 109
Registriert: 29.11.2014, 18:09
Danksagung erhalten: 1 Mal

Logging data

Beitrag von blueznl » 26.12.2017, 19:52

I'm a little surprised there seems to be no 'standard' function to log data, so some work is required.

Does anyone have a good suggestion of keeping a log of certain data?

Here's what I want to do:

- log temperature a radiator valve (2x)
- log valve position of a radiator valve (2x)
- log a switch position (city heating main valve, open / close) (1x)
- log power (switching actuator) (3x)

I currently also deploy a 'BeeClear' gadget, a small box reading data from the energy company's meter, and would like to match some individual meter data with the results of the BeeClear box, as well as do some further optimizing to reduce energy usage.

I need a relatively detailed logging, approx. 3000 data points per object, per day

What is the best way to approach this?

It's not a permanent solution, so if I would have to keep my PC running for a day or two that is fine. I'm a little reluctant to install all sorts of other software on the CCU2, as any downtime will leave me with a very cold house :-) but that is acceptable too if it's the best solution :-)

Any suggestions?

Benutzeravatar
Homoran
Beiträge: 8613
Registriert: 02.07.2013, 15:29
Wohnort: Köln
Danksagung erhalten: 4 Mal

Re: Logging data

Beitrag von Homoran » 26.12.2017, 19:58

Did you ever hear about ioBroker?
The nederlands forum is not really good supportet, but we do our best ;-)

You can log nearly all you want:
Here are my ioBroker server's data
Last_Tinker.jpg
just because i had it at hand ;-)

Greetz
Rainer
Alle meine Hinweise sind auf eigene Gefahr umzusetzen. Immer einen Fachmann zu Rate ziehen!

blueznl
Beiträge: 109
Registriert: 29.11.2014, 18:09
Danksagung erhalten: 1 Mal

Re: Logging data

Beitrag von blueznl » 26.12.2017, 20:37

I can actually tell you that I had a look at IObroker some time ago. I'll have another look at it (if it is easy to install and run it might be interesting as a more flexible alternative to the CCU2).

Which still doesn't invalidate my question, as I also want to know what is the beast / easiest solution for the CCU2 :D

blueznl
Beiträge: 109
Registriert: 29.11.2014, 18:09
Danksagung erhalten: 1 Mal

Re: Logging data

Beitrag von blueznl » 10.03.2018, 21:17

Well, answering my own question: the solution was pretty simple. Just put in an SD card... :oops:

It's not perfect but good enough for now.

Sven_A
Beiträge: 4152
Registriert: 26.01.2016, 08:14
System: Alternative CCU (auf Basis OCCU)
Wohnort: Renningen
Hat sich bedankt: 345 Mal
Danksagung erhalten: 281 Mal

Re: Logging data

Beitrag von Sven_A » 13.03.2018, 12:58

Sorry, didn't see your post before.
I use ccu-historian, let it run on an old rasperry 2. WebUI is f*** slow on the small raspbi, but, it works, and i just want to check some singe every other week. Installing is really easy, just a few settings in a txt-config-file, fire it up, all good.

Antworten

Zurück zu „HomeMatic - english“