How to switch on the Electric Boiler (Elektrisch Heizkessel) with thermostatic radiator heads?

Support for our english speaking visitors

Moderator: Co-Administratoren

Doctor.ventil
Beiträge: 28
Registriert: 12.08.2018, 13:29
Wohnort: Czech Republic

Re: How to switch on the Electric Boiler (Elektrisch Heizkessel) with thermostatic radiator heads?

Beitrag von Doctor.ventil » 14.03.2019, 16:18

I have adjusted a bit the setting of WHS2 - several times I woke up in the middle of the night and heard the heating running, although all radiators should be off - they looked like, but probably they were more than 1% open - so I have changed the setting to switch on from 5% on and it's working perfect :wink:

Sergo
Beiträge: 97
Registriert: 01.11.2017, 18:28
Wohnort: Estonia
Hat sich bedankt: 3 Mal
Danksagung erhalten: 9 Mal

Re: How to switch on the Electric Boiler (Elektrisch Heizkessel) with thermostatic radiator heads?

Beitrag von Sergo » 14.03.2019, 16:46

Where did you found that setting??

Doctor.ventil
Beiträge: 28
Registriert: 12.08.2018, 13:29
Wohnort: Czech Republic

Re: How to switch on the Electric Boiler (Elektrisch Heizkessel) with thermostatic radiator heads?

Beitrag von Doctor.ventil » 14.03.2019, 23:10

Sergo hat geschrieben:
14.03.2019, 16:46
Where did you found that setting??
When you set up WHS2 in Homematic app, it is one of the steps in set up wizard ;)

Sergo
Beiträge: 97
Registriert: 01.11.2017, 18:28
Wohnort: Estonia
Hat sich bedankt: 3 Mal
Danksagung erhalten: 9 Mal

Re: How to switch on the Electric Boiler (Elektrisch Heizkessel) with thermostatic radiator heads?

Beitrag von Sergo » 15.03.2019, 07:21

Ahh... Homematic app :!:
Never had a chance to play with it :roll:

blueznl
Beiträge: 109
Registriert: 29.11.2014, 18:09
Danksagung erhalten: 1 Mal

Re: How to switch on the Electric Boiler (Elektrisch Heizkessel) with thermostatic radiator heads?

Beitrag von blueznl » 27.03.2019, 11:32

Doctor.ventil hat geschrieben:
14.03.2019, 16:18
I have adjusted a bit the setting of WHS2 - several times I woke up in the middle of the night and heard the heating running, although all radiators should be off - they looked like, but probably they were more than 1% open - so I have changed the setting to switch on from 5% on and it's working perfect :wink:
Yes, that happens. I even went for 10% on my floor heating.

Be aware that firmware might make some difference... I had newer firmware in my radiator valves and it was a complete disaster and quickly downgraded / returned to an older version again. The newer version kept my valves unnecessary open, with lots of minor changes with little to no effect.

Doctor.ventil
Beiträge: 28
Registriert: 12.08.2018, 13:29
Wohnort: Czech Republic

Re: How to switch on the Electric Boiler (Elektrisch Heizkessel) with thermostatic radiator heads?

Beitrag von Doctor.ventil » 27.03.2019, 14:20

Good to know, I have again realised yesterday it is somehow running in the night although none of the radiators was even warm... it is still cold outside but set up temperature for night schedule is also low.

I will try with 10% as well, thanks for tip ;-)

Antworten

Zurück zu „HomeMatic - english“