Hi there,
I'm trying to upgrade a rotary switch on my electric shutter to a Homematic IP (HMIP-BROLL) smart switch, however I'm having no luck getting the new switch to turn on. I don't know if that's because I have a defect in the switch itself, or more likely a defect in my wiring setup.
Here is a link to pics and diagrams of the old wiring and how I tried to wired the new switch too.
https://imgur.com/gallery/T71Y1gG
Does anyone know what I'm doing wrong please?
Thanks
Can't get HMIP-BROLL actuator to work
Moderator: Co-Administratoren
- Roland M.
- Beiträge: 9804
- Registriert: 08.12.2012, 15:53
- System: CCU
- Wohnort: Graz, Österreich
- Hat sich bedankt: 252 Mal
- Danksagung erhalten: 1381 Mal
Re: Can't get HMIP-BROLL actuator to work
Hello!
Sorry for being rude, but when I see the green/yellow wire (protective earth!) connected to the neutral terminal I must strongly recommend to get a professional electrican to do the work!
It's for your own safety and the safety of your family and friends!
To prevent further (unpleasant) comments I'll close the thread.
Roland
Sorry for being rude, but when I see the green/yellow wire (protective earth!) connected to the neutral terminal I must strongly recommend to get a professional electrican to do the work!
It's for your own safety and the safety of your family and friends!
To prevent further (unpleasant) comments I'll close the thread.
Roland
Zur leichteren Hilfestellung bitte unbedingt beachten:
-----------------------------------------------------------------------
1. CCU2 mit ~100 Geräten (in Umstellung auf RaspberryMatic-OVA auf Proxmox-Server)
2. CCU2 per VPN mit ~50 Geräten (geplant: RaspberryMatic auf Charly)
3. CCU2 per VPN mit ~40 Geräten (geplant: RaspberryMatic auf CCU3)
CCU1, Test-CCU2, Raspi 1 mit kleinem Funkmodul, RaspberryMatic als VM unter Proxmox, Access Point,...
- Bezeichnung (HM-... bzw. HmIP-...) der betroffenen Geräte angeben (nicht Artikelnummer)
- Kurzbeschreibung des Soll-Zustandes (Was soll erreicht werden?)
- Kurzbeschreibung des Ist-Zustandes (Was funktioniert nicht?)
- Fehlermeldungen genau abschreiben, besser noch...
- Screenshots von Programmen, Geräteeinstellungen und Fehlermeldungen (direkt als jpg/png) einstellen!
-----------------------------------------------------------------------
1. CCU2 mit ~100 Geräten (in Umstellung auf RaspberryMatic-OVA auf Proxmox-Server)
2. CCU2 per VPN mit ~50 Geräten (geplant: RaspberryMatic auf Charly)
3. CCU2 per VPN mit ~40 Geräten (geplant: RaspberryMatic auf CCU3)
CCU1, Test-CCU2, Raspi 1 mit kleinem Funkmodul, RaspberryMatic als VM unter Proxmox, Access Point,...