Yes, I have started from direct link. Initially all devices was under function heating. Then I added available channels of HmIP-WTH and few of HMipPCBS also under "Climatic": Created direct link between HmIP-WTH (channel 5) and HMIP-PCBS (channel 3) BTW, what I call a channel, for example for HmIP-WTH: Channel 5 - HEATING_CLIMATECONTROL_SWITCH_TRANSMITTER. Let me know if there is more appropriate translation from German.
What I'm trying to achieve:
is to switch ON heater, once temperature drops below setpoint for >0.4C, and switch it OFF once temperature exceeded by >0.4C above current setpoint.
How I'm testing that its working, for example:
current temp = 19C, setting temp on HmIP-WTH to 21C and awaiting switch of HmIP-PCBS (radiator thermostat meanwhile opens).
I had the same issue on second floor with Homematic HM-TC-IT-WM-W-EU -->HM-LC-Sw1-Ba-PCB, but this was workaround-ed by CCU program with few clicks. By monitoring output of HM-TC-IT-WM-W-EU on channel 7 and triggering HM-LC-Sw1-Ba-PCB on channel 1.
Thanks in advance!
P.S. found this discussion, apparently this seems like worked viewtopic.php?f=59&t=46320&p=463546&hil ... BS#p463546