Philips Hue and CCU2 - automatic white temperature change (CCT)

[omicronCZ]

I solve the following problem with Philips Hue lights in the bathroom:

- i want to use Philips Hue with CCT (changeable white temperature)

- when I turn on the light, I want to be set white temperature automatically according to the astro calendar in Homematic, for example, morning to cold white light, evening to warm white light...

- can CCU2 program somehow automatically preset Philips Hue white temperature (CCT) before manually turn on the light normally?

- at certain times (3x daily), the CCU program at the second light turn on (if it was not turned off), changed his chromaticity (temperature white) and turn it off, thus prepare him to later manually turned on by the user

- when a user would turn on the lamp switched on has the right temperature white

Possible? I do not have any experience with Philips Hue (ZigBee) under the Homematic CCU2 ...

[tomi_cc16]

viewtopic.php?f=49&t=46890

[omicronCZ]

Yes, I know about this addon for Philips Hue and I want to use it.

But who's already using it does not have answers to my questions?

[tomi_cc16]

Hi,

from What I understood I would say it's probably possible.

But there are different ways how you can achieve it.

Logic in CCU - here you have different Addons that could do the job.

Hue-Addon:
https://github.com/j-a-n/homematic-addon-hue
https://ownsmarthome.de/2018/05/mit-hom ... n-steuern/
Forum discussion:
viewtopic.php?f=41&t=35617

Homematic-Virtual-Interface Addon:
https://github.com/thkl/Homematic-Virtual-Interface
Forum discussion
viewtopic.php?f=41&t=33848

Redmatic (Node Red) Addon for CCU3:
https://github.com/hm-redmatic/redmatic
https://www.youtube.com/watch?v=Vv0CnE64Mqs
https://flows.nodered.org/node/node-red ... b-huemagic

Or you put the complete logic outside the CCU to ioBroker or Home Assistant to start and execute the programs.
You just need to connect CCU and Hue with one of the many Home Automation Hubs

[omicronCZ]

The script would be:
- Philips Hue lamp switches on with a conventional switch
- at the moment of switching off, he can not know his status via Zigbee or Homematic
- then the light turns on manual switch
- At this moment the light is on-line, and can be controlled via Zigbee and also via Homematic
- is there an option at this time to automatically retrieve its state and change its temperature (CCT) to white by day (time function - astro kalender)?
I mean, immediately after turning it on manually with a switch ...

Thank you