i have a CCU3, a 10 zone Underfloor heating controller and a combination of 2 thermostats, 2 Temp / humidity sensors with display and several Temp / humidity sensors.
Zone 1 of the Underfloor controller is wired as the pump / valve control.
Zones 5 and 10 have thermostatic wall sensors and the rest have 'non settable' sensors.
I think I have all the sensors connected to their relative channels on the CCU3.
I have a common connection to channel 1 to allow it to control the heat demand.
But the underfloor heating is not 'turned on' the controller is just sitting there with all of the channels off. ( and it's starting to get cold! )
is there something I need to do to 'enable' the heating controller?
CCU3 + Underfloor heating controller
Moderator: Co-Administratoren
-
- Beiträge: 1152
- Registriert: 30.11.2013, 16:35
- Wohnort: Mordor
- Hat sich bedankt: 23 Mal
- Danksagung erhalten: 56 Mal
Re: CCU3 + Underfloor heating controller
Hi,
have you checked the documentation? WebUI English Manual - EN Version 0.4 - from Chapter 22.
viewtopic.php?f=49&t=45485
The translation was done with google - so if some pages are not clear let me know than I can correct them manually.
have you checked the documentation? WebUI English Manual - EN Version 0.4 - from Chapter 22.
viewtopic.php?f=49&t=45485
The translation was done with google - so if some pages are not clear let me know than I can correct them manually.
Re: CCU3 + Underfloor heating controller
The explanations in the manual are a little vague. A simple explanation of the concepts of linking needs to be made a little more prominent ( I figured it out myself eventually, typical ..... who reads a manual! )
A 'cheat sheet' shortcut guide might be easier. I'll give it some thought.
In the meantime I'm still looking for a global 'enable underfloor heating' method.........
Next is to turn off certain zones depending on who's at home or visiting etc.
As for now I have a working ground floor and tonight I will rewire the upper floor to a second underfloor controller.
A 'cheat sheet' shortcut guide might be easier. I'll give it some thought.
In the meantime I'm still looking for a global 'enable underfloor heating' method.........
Next is to turn off certain zones depending on who's at home or visiting etc.
As for now I have a working ground floor and tonight I will rewire the upper floor to a second underfloor controller.
-
- Beiträge: 1152
- Registriert: 30.11.2013, 16:35
- Wohnort: Mordor
- Hat sich bedankt: 23 Mal
- Danksagung erhalten: 56 Mal
Re: CCU3 + Underfloor heating controller
Maybe this visual help/video - even its in german - will bring you to your goal.
HomeMatic - Fussbodenheizung mit der CCU
https://www.youtube.com/watch?v=A-dvP35msYI
HomeMatic - Fussbodenheizung mit der CCU
https://www.youtube.com/watch?v=A-dvP35msYI