Connection problems CCU2

Support for our english speaking visitors

Moderator: Co-Administratoren

Remko
Beiträge: 28
Registriert: 06.02.2018, 20:47
Hat sich bedankt: 1 Mal

Re: Connection problems CCU2

Beitrag von Remko » 06.11.2020, 22:38

samuellazea hat geschrieben:
06.11.2020, 22:11
Try to create just a route to that subnet and access the ccu and assign it a permanent ip in the subnet you want. That would be 5 minute work :wink:
Also for a guy with my knowlegde?? :?

Do I understand your anwer correct? I have to create a route (don't know how) to the current subnet of the CCU (68) and then change the IP adres in the CCU webUI to an IP with subnet 178?

Remko
Beiträge: 28
Registriert: 06.02.2018, 20:47
Hat sich bedankt: 1 Mal

Re: Connection problems CCU2

Beitrag von Remko » 06.11.2020, 22:51

Reconfigure the M4 system from AP Mode back to Router Mode.
Set the IP range in the M4 to 192.168.68.1 (Advanced features -> IPv4 -> WAN -> IP address) and restart the system.
Then connect laptop to the M4 system and it should obtain an IP in the same range as the CCU's current IP.
If luck is on your side you should then be able to connect to the WebUI with your browser
Above works. Don't understand why (specially why it did work for a short time last week), but I'm happy!!
I had to change IP adres in my favorite in edge and in my app '@Home' (from 192.168.178.11 to 192.168.68.11)in order to get both shortcuts work again. :?

Dankjewel cmjay!

cmjay
Beiträge: 2373
Registriert: 19.09.2012, 10:53
System: CCU
Wohnort: Jottweedee
Hat sich bedankt: 250 Mal
Danksagung erhalten: 348 Mal

Re: Connection problems CCU2

Beitrag von cmjay » 06.11.2020, 23:05

Glad you were successful.
Mind you you now have again a router cascade. That means a device / laptop connected to the Ziggo box will not be able to see a device connected to the M4 system and vice versa! In order to avoid issues in the future I would now set a fixed IP in the CCU in the IP range of the Ziggo box (e.g. 192.168.178.200) and subsequently set the M4 system back into AP mode.
That should result in a single subnet range 192.168.178.x for your whole network irrespective of how and where you connect a device. And the CCU reachable with IP 192.168.178.200 in your network.
Es kann leider nicht ganz ausgeschlossen werden, dass ich mich irre.
HmIP muss leider draussen bleiben. in Ausnahmefällen erlaubt
ACHTUNG! Per Portweiterleitung aus dem Internet erreichbare CCU-WebUI ist unsicher! AUCH MIT PASSWORTSCHUTZ! Daher: Portweiterleitung deaktivieren!

Remko
Beiträge: 28
Registriert: 06.02.2018, 20:47
Hat sich bedankt: 1 Mal

Re: Connection problems CCU2

Beitrag von Remko » 07.11.2020, 08:10

I will try to change the IP of the CCU this evening! I'll come back with the result!

Remko
Beiträge: 28
Registriert: 06.02.2018, 20:47
Hat sich bedankt: 1 Mal

Re: Connection problems CCU2

Beitrag von Remko » 08.11.2020, 09:48

I changed the IP adres via settings -> control panel -> network settings from 192.168.68.11 to 192.168.178.200. All other network settings I didn't touch.

The strange thing is that I can still connect to the CCU with the old IP adres.... Do I have to restart the CCU before it really changes?
Also via Netfinder the IP adress of the CCU didn't change...

cmjay
Beiträge: 2373
Registriert: 19.09.2012, 10:53
System: CCU
Wohnort: Jottweedee
Hat sich bedankt: 250 Mal
Danksagung erhalten: 348 Mal

Re: Connection problems CCU2

Beitrag von cmjay » 08.11.2020, 10:45

Do I have to restart the CCU before it really changes?
Yes. And make sure that when restarting the CCU is either connected to the Ziggo box or that you have already set back the M4 system into AP mode. Otherwise you will not find the CCU with its new IP address in your network.
Es kann leider nicht ganz ausgeschlossen werden, dass ich mich irre.
HmIP muss leider draussen bleiben. in Ausnahmefällen erlaubt
ACHTUNG! Per Portweiterleitung aus dem Internet erreichbare CCU-WebUI ist unsicher! AUCH MIT PASSWORTSCHUTZ! Daher: Portweiterleitung deaktivieren!

Remko
Beiträge: 28
Registriert: 06.02.2018, 20:47
Hat sich bedankt: 1 Mal

Re: Connection problems CCU2

Beitrag von Remko » 08.11.2020, 13:23

Thanks cmjay!

Everythings is working now as it should!
IP of CCU2 on 192.168.178.200 and TP-link M4 on Access point mode.

cmjay
Beiträge: 2373
Registriert: 19.09.2012, 10:53
System: CCU
Wohnort: Jottweedee
Hat sich bedankt: 250 Mal
Danksagung erhalten: 348 Mal

Re: Connection problems CCU2

Beitrag von cmjay » 08.11.2020, 13:32

graag gedaan
Es kann leider nicht ganz ausgeschlossen werden, dass ich mich irre.
HmIP muss leider draussen bleiben. in Ausnahmefällen erlaubt
ACHTUNG! Per Portweiterleitung aus dem Internet erreichbare CCU-WebUI ist unsicher! AUCH MIT PASSWORTSCHUTZ! Daher: Portweiterleitung deaktivieren!

Antworten

Zurück zu „HomeMatic - english“