Hello my friends,
Sorry for disturbing again. I have a problem/question related to a program where I try to trigger a switch based on time (hour) but for some reason it does not want to trigger it. I attach pictures of the program and device. Don't know why such a simple program would not run but maybe I do something wrong
Thanks lots in advance for the help
Program based on time/hour does not trigger
Moderator: Co-Administratoren
-
- Beiträge: 72
- Registriert: 09.10.2018, 08:49
- System: CCU und Access Point
- Hat sich bedankt: 16 Mal
-
- Beiträge: 72
- Registriert: 09.10.2018, 08:49
- System: CCU und Access Point
- Hat sich bedankt: 16 Mal
Re: Program based on time/hour does not trigger
Doing some digging I noticed that the Switch-on time does not work properly in my case. Maybe I did something wrong?
Any help would be greatly appreciated
I just did this script without any condition and wanted to trigger the switch actor for 4000 seconds manually but it seems nothing gets done. So I am afraid that the Switch-on time as set in there does not work. Any help would be greatly appreciated
-
- Beiträge: 336
- Registriert: 05.10.2020, 18:37
- System: CCU
- Hat sich bedankt: 30 Mal
- Danksagung erhalten: 25 Mal
Re: Program based on time/hour does not trigger
Hi,
after setting the switch-on-time you need to switch on the actor too.
Thomas
after setting the switch-on-time you need to switch on the actor too.
Thomas
Wenn du keine App zur Bedienung brauchst, dann hast du kein Smarthome, sondern nur eine angefangene Baustelle, oder nur ein unsmartes Autohome.
Homematic-Script - ScriptLexikon für alle
Methoden Konstanten
Hilfe und Infos erwünscht. Alle können mitmachen. Keine Levels. Keine Geheimtuerei.
Homematic-Script - ScriptLexikon für alle
Methoden Konstanten
Hilfe und Infos erwünscht. Alle können mitmachen. Keine Levels. Keine Geheimtuerei.
-
- Beiträge: 72
- Registriert: 09.10.2018, 08:49
- System: CCU und Access Point
- Hat sich bedankt: 16 Mal
Re: Program based on time/hour does not trigger
And how can I do that? I thought this was the call to switch on the actor. Sorry for being new to this[sprotte80] hat geschrieben: ↑13.11.2020, 19:25Hi,
after setting the switch-on-time you need to switch on the actor too.
Thomas
Like this? And then he will use the switch on time from above?
Thanks lots
-
- Beiträge: 72
- Registriert: 09.10.2018, 08:49
- System: CCU und Access Point
- Hat sich bedankt: 16 Mal
Re: Program based on time/hour does not trigger
Thank you lots for your answer. Did not know I need to trigger the actor again after the time. Works like a charm.
Bow to you sir
Bow to you sir