District Heating - Mixing control for Single Pipe Central Heating

Support for our english speaking visitors

Moderator: Co-Administratoren

Antworten
jesper
Beiträge: 1
Registriert: 18.12.2021, 14:10
System: keine Zentrale (nur Pairing, FHEM etc.)

District Heating - Mixing control for Single Pipe Central Heating

Beitrag von jesper » 23.12.2021, 12:06

Hello.

I would like to know if a home matic Floor Heating Control can be used as an alternative to Danfoss ECL Comfort 210/310 products.

My house has a Single Pipe Central Heating with energy delivered by District Heating.
Currently the heat is delivered through a Direct Heating mixing loop.

The mixing loop has an in-flow thermal control with a probe & an out-flow direct thermal control.

All important radiators have EQ3 Thermostats setup, some with a Wall mount as well.

So if the installation is changed and a Valve is installed together with thermal probe.
Could a Floor Heating Actuator be used to control the themperature in the system.
Based on the need of the EQ3 Thermostats?

This might already be answered in German, sadly i do not understand it.

blueznl
Beiträge: 109
Registriert: 29.11.2014, 18:09
Danksagung erhalten: 1 Mal

Re: District Heating - Mixing control for Single Pipe Central Heating

Beitrag von blueznl » 14.11.2022, 22:27

Sounds very familiar to my setup. However, why would you want to change the temperature of a floor heating system?

Antworten

Zurück zu „HomeMatic - english“