Homematic IP
Moderator: Co-Administratoren
-
- Beiträge: 6
- Registriert: 14.02.2022, 16:30
- System: in Planung
Homematic IP
As I'm planning to install the homematic IP in a studenthouse with wireless thermostats in all rooms, I would like to monitor which student is consuming more than others. Is there a way to log the amount of heat demand of every thermostat over a period of time? For example: is there a way that I can see after one year how many hours a student put his thermostat above 20 degrees?
- Roland M.
- Beiträge: 9806
- Registriert: 08.12.2012, 15:53
- System: CCU
- Wohnort: Graz, Österreich
- Hat sich bedankt: 252 Mal
- Danksagung erhalten: 1381 Mal
Re: Homematic IP
Hello!
Please check also your local legal requirements to do this.
Roland
No.Vincentj94 hat geschrieben: ↑05.05.2022, 13:30Is there a way to log the amount of heat demand of every thermostat over a period of time?
If you are using the CCU instead of the access point, you could use programs like CCU-Historian to record actual temperatures, valve states, settings, and so on in a database. However, it remains your task to evaluate this data.is there a way that I can see after one year how many hours a student put his thermostat above 20 degrees?
Please check also your local legal requirements to do this.
Roland
Zur leichteren Hilfestellung bitte unbedingt beachten:
-----------------------------------------------------------------------
1. CCU2 mit ~100 Geräten (in Umstellung auf RaspberryMatic-OVA auf Proxmox-Server)
2. CCU2 per VPN mit ~50 Geräten (geplant: RaspberryMatic auf Charly)
3. CCU2 per VPN mit ~40 Geräten (geplant: RaspberryMatic auf CCU3)
CCU1, Test-CCU2, Raspi 1 mit kleinem Funkmodul, RaspberryMatic als VM unter Proxmox, Access Point,...
- Bezeichnung (HM-... bzw. HmIP-...) der betroffenen Geräte angeben (nicht Artikelnummer)
- Kurzbeschreibung des Soll-Zustandes (Was soll erreicht werden?)
- Kurzbeschreibung des Ist-Zustandes (Was funktioniert nicht?)
- Fehlermeldungen genau abschreiben, besser noch...
- Screenshots von Programmen, Geräteeinstellungen und Fehlermeldungen (direkt als jpg/png) einstellen!
-----------------------------------------------------------------------
1. CCU2 mit ~100 Geräten (in Umstellung auf RaspberryMatic-OVA auf Proxmox-Server)
2. CCU2 per VPN mit ~50 Geräten (geplant: RaspberryMatic auf Charly)
3. CCU2 per VPN mit ~40 Geräten (geplant: RaspberryMatic auf CCU3)
CCU1, Test-CCU2, Raspi 1 mit kleinem Funkmodul, RaspberryMatic als VM unter Proxmox, Access Point,...