Erstinbetriebnahme Anlernmodus fehler

[ElDiablo1985]

Hallo Leute,

ich habe mir das Modul zurecht gelötet.
Denn Raspberry mit Software in betrieb genommen und auch gleich Java installiert.

Beim Anlernmodus kommt aber immer "Anlernmodus konnte nicht aktiviert werden"

Muss ich das Modul noch irgendwie Aktivieren ?

Grüße

[ElDiablo1985]

Kann man denn sehen ob das Funkmodul Defekt ist ? Eventuell mit einer Putty abfrage ob er überhaupt gefunden wurde ?

[JRiemann]

Hallo!
Ich denke die Fehlermeldung hat nichts mit dem Funkmodul zu tun. Der komplette Anlernmodus funktioniert ja nicht... Dieser müsste aber auch ohne Funkmodul funktionieren. Man könnte das ganze ja auch ohne Funkmodul mit einem Lan-Gateway betreiben. Dein Fehler wird irgendwo in der Softwareinstallation liegen.
Aber dazu müsste man zuerst wissen welches System Du verwendest? Raspberry Matic?
Mit den sparsamen Informationen wird sich sicher kein Helfer finden...

Grüße!
Jörg

[ElDiablo1985]

Sorry, ich dachte das occu dieses OS für den raspberry ist. Also raspberry matic. Ich verwende die Version für raspberry 2. habe auch Zugriff drauf aber der anlernmodus geht nicht. Ist auch Java installiert.

Welche Informationen werden noch benötigt ?

[JRiemann]

Hallo!
OCCU ist dumm gesagt der öffentlich freigegebene Quellcode der originalen CCU Firmware bzw. Software.
Auf dieser Basis arbeiten Umsetzungen wie Raspberry Matic.

Hast Du die aktuelle 2.15.5 als Basis eingestzt? Wurde die Einrichtung nach dieser Anleitung durchgeführt?
http://homematic-forum.de/forum/viewtop ... 56&t=26917

Ich bin jetzt leider unterwegs und kann selbst nicht genau suchen. Aber das Problem mit dem Anlernmodus gab es bereits. Geb doch mal: "anlernmodus funktioniert nicht" oder ähnliches in die Forensuche ein. Ich bekomme dort aktuell 140 Treffer.

Grüße!
Jörg

[ElDiablo1985]

Ich habe die Version "RaspberryMatic-2.15.5-3" verwendet, da der Download nicht Online war und jemand eine Version "die RaspberryMatic-2.15.5-3" bei Google Drive" angeboten hatte. Eine Neuere Version wird in der Weboberfläche auch nicht gefunden. Wo kann ich denn die Aktuellste immer Laden ? So eine Richtige Offizielle Download Seite habe ich nicht gefunden.

Ja, ich habe mich nach dieser Anleitung gehalten.

Beim Starten steht da Starting rfd: Checking if Firmware update is needed...
error while updating coprocessir, force....
(Keine Ahnung ob es eine Rolle spielt)

Steht so in der WebUI

Uhrzeit: 11:10
Datum: 07.05.2016
Sonnenaufgang: 05:19
Sonnenuntergang: 20:45
Aktuelle Firmwareversion: 2.15.5
CCU-Update: Firmware n/a ist verfügbar
Anmelden: Kein Kennwort gesetzt

[Homoran]

Ich habe die Version "RaspberryMatic-2.15.5-3" verwendet,

Also reden wir nicht von OCCU, sondern von RaspberryMatic!

dann sieh mal in dem entpsrechenden Thread nach.

Gruß
Rainer

[ElDiablo1985]

Habe ich gemacht. Ich habe ja denn RPI2 und habe bei folgenden eintrag auch folgendes Ergebniss....

# ls /dev/ttyAMA*
/dev/ttyAMA0

Also gehe ich davon aus das er dieses Funkmodul erkennt aber das Modul beim Löten eventuell Defekt gegangen ist.

Wäre es denn nicht möglich für das Raspberry OS ein extra Bereich hier im Forum zu erstellen ? Scheint noch keines zu geben.

Edit 12:20Uhr
Eventuell hilft es ja denn Fehler zu erkennen.

Jan 1 01:00:45 buildroot syslog.info syslogd started: BusyBox v1.23.2
Jan 1 01:00:45 buildroot user.notice kernel: klogd started: BusyBox v1.23.2 (2015-11-06 09:08:17 CET)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Booting Linux on physical CPU 0xf00
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Initializing cgroup subsys cpuacct
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] Linux version 4.0.6-v7 (hudson@entw-build-10) (gcc version 4.9.3 (Buildroot 2015.08.1) ) #1 SMP PREEMPT Fri Nov 6 09:49:10 CET 2015
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] cma: Reserved 8 MiB at 0x38400000
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Jan 1 01:00:45 buildroot user.debug kernel: [ 0.000000] On node 0 totalpages: 232448
Jan 1 01:00:45 buildroot user.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 8085c7c0, node_mem_map b7bf7000
Jan 1 01:00:45 buildroot user.debug kernel: [ 0.000000] Normal zone: 2043 pages used for memmap
Jan 1 01:00:45 buildroot user.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 01:00:45 buildroot user.debug kernel: [ 0.000000] Normal zone: 232448 pages, LIFO batch:31
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.000000] [bcm2709_smp_init_cpus] enter (8660->f3003010)
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] PERCPU: Embedded 11 pages/cpu @b7bbe000 s16192 r8192 d20672 u45056
Jan 1 01:00:45 buildroot user.debug kernel: [ 0.000000] pcpu-alloc: s16192 r8192 d20672 u45056 alloc=11*4096
Jan 1 01:00:45 buildroot user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 230405
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa21041 bcm2709.serial=0x69a8c134 smsc95xx.macaddr=B8:27:EB:A8:C1:34 bcm2708_fb.fbswap=1 bcm2709.disk_le
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Memory: 903012K/929792K available (5979K kernel code, 379K rwdata, 1792K rodata, 412K init, 757K bss, 18588K reserved, 8192K cma-reserved)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] Virtual kernel memory layout:
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] vmalloc : 0xb9000000 - 0xff000000 (1120 MB)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] lowmem : 0x80000000 - 0xb8c00000 ( 908 MB)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] .text : 0x80008000 - 0x8079ee9c (7772 kB)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] .init : 0x8079f000 - 0x80806000 ( 412 kB)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] .data : 0x80806000 - 0x80864d34 ( 380 kB)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.000000] .bss : 0x80864d34 - 0x809224f4 ( 758 kB)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Additional per-CPU info printed with stalls.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] NR_IRQS:608
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000015] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000037] Switching to timer-based delay loop, resolution 52ns
Jan 1 01:00:45 buildroot user.info kernel: [ 0.000322] Console: colour dummy device 80x30
Jan 1 01:00:45 buildroot user.info kernel: [ 0.001946] console [tty0] enabled
Jan 1 01:00:45 buildroot user.info kernel: [ 0.002010] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.002111] pid_max: default: 32768 minimum: 301
Jan 1 01:00:45 buildroot user.info kernel: [ 0.002501] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.002567] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.003888] Initializing cgroup subsys blkio
Jan 1 01:00:45 buildroot user.info kernel: [ 0.003976] Initializing cgroup subsys memory
Jan 1 01:00:45 buildroot user.info kernel: [ 0.004046] Initializing cgroup subsys devices
Jan 1 01:00:45 buildroot user.info kernel: [ 0.004108] Initializing cgroup subsys freezer
Jan 1 01:00:45 buildroot user.info kernel: [ 0.004184] Initializing cgroup subsys net_cls
Jan 1 01:00:45 buildroot user.info kernel: [ 0.004310] CPU: Testing write buffer coherency: ok
Jan 1 01:00:45 buildroot user.info kernel: [ 0.004437] ftrace: allocating 20092 entries in 59 pages
Jan 1 01:00:45 buildroot user.info kernel: [ 0.053200] CPU0: update cpu_capacity 1024
Jan 1 01:00:45 buildroot user.info kernel: [ 0.053284] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.053333] [bcm2709_smp_prepare_cpus] enter
Jan 1 01:00:45 buildroot user.info kernel: [ 0.053499] Setting up static identity map for 0x565560 - 0x565594
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.113093] [bcm2709_boot_secondary] cpu:1 started (0) 18
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.113485] [bcm2709_secondary_init] enter cpu:1
Jan 1 01:00:45 buildroot user.info kernel: [ 0.113542] CPU1: update cpu_capacity 1024
Jan 1 01:00:45 buildroot user.info kernel: [ 0.113551] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.133074] [bcm2709_boot_secondary] cpu:2 started (0) 18
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.133396] [bcm2709_secondary_init] enter cpu:2
Jan 1 01:00:45 buildroot user.info kernel: [ 0.133428] CPU2: update cpu_capacity 1024
Jan 1 01:00:45 buildroot user.info kernel: [ 0.133437] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.153116] [bcm2709_boot_secondary] cpu:3 started (0) 18
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.153361] [bcm2709_secondary_init] enter cpu:3
Jan 1 01:00:45 buildroot user.info kernel: [ 0.153391] CPU3: update cpu_capacity 1024
Jan 1 01:00:45 buildroot user.info kernel: [ 0.153400] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
Jan 1 01:00:45 buildroot user.info kernel: [ 0.153495] Brought up 4 CPUs
Jan 1 01:00:45 buildroot user.info kernel: [ 0.153630] SMP: Total of 4 processors activated (153.60 BogoMIPS).
Jan 1 01:00:45 buildroot user.info kernel: [ 0.153673] CPU: All CPU(s) started in SVC mode.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.154702] devtmpfs: initialized
Jan 1 01:00:45 buildroot user.info kernel: [ 0.174317] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Jan 1 01:00:45 buildroot user.info kernel: [ 0.175565] pinctrl core: initialized pinctrl subsystem
Jan 1 01:00:45 buildroot user.info kernel: [ 0.180207] NET: Registered protocol family 16
Jan 1 01:00:45 buildroot user.info kernel: [ 0.185913] DMA: preallocated 4096 KiB pool for atomic coherent allocations
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.187060] bcm2709.uart_clock = 3000000
Jan 1 01:00:45 buildroot user.info kernel: [ 0.191936] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.192007] hw-breakpoint: maximum watchpoint size is 8 bytes.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.192170] Serial: AMBA PL011 UART driver
Jan 1 01:00:45 buildroot user.info kernel: [ 0.192382] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
Jan 1 01:00:45 buildroot user.info kernel: [ 0.193252] bcm2708_vcio 3f00b880.mailbox: mailbox at f300b880
Jan 1 01:00:45 buildroot user.info kernel: [ 0.264704] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x7f35
Jan 1 01:00:45 buildroot user.info kernel: [ 0.265303] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
Jan 1 01:00:45 buildroot user.info kernel: [ 0.265356] bcm2708-dmaengine 3f007000.dma: dma_debug:0
Jan 1 01:00:45 buildroot user.info kernel: [ 0.265511] bcm_power: Broadcom power driver
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.265554] bcm_power_open() -> 0
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.265589] bcm_power_request(0,
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.766280] bcm_mailbox_read -> 00000080, 0
Jan 1 01:00:45 buildroot user.warn kernel: [ 0.766322] bcm_power_request -> 0
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.766990] SCSI subsystem initialized
Jan 1 01:00:45 buildroot user.info kernel: [ 0.767257] usbcore: registered new interface driver usbfs
Jan 1 01:00:45 buildroot user.info kernel: [ 0.767411] usbcore: registered new interface driver hub
Jan 1 01:00:45 buildroot user.info kernel: [ 0.767593] usbcore: registered new device driver usb
Jan 1 01:00:45 buildroot user.info kernel: [ 0.769509] Switched to clocksource arch_sys_counter
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.799264] FS-Cache: Loaded
Jan 1 01:00:45 buildroot user.info kernel: [ 0.799736] CacheFiles: Loaded
Jan 1 01:00:45 buildroot user.info kernel: [ 0.811445] NET: Registered protocol family 2
Jan 1 01:00:45 buildroot user.info kernel: [ 0.812786] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.812971] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.813198] TCP: Hash tables configured (established 8192 bind 8192)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.813358] TCP: reno registered
Jan 1 01:00:45 buildroot user.info kernel: [ 0.813403] UDP hash table entries: 512 (order: 2, 16384 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.813498] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.814027] NET: Registered protocol family 1
Jan 1 01:00:45 buildroot user.info kernel: [ 0.814487] RPC: Registered named UNIX socket transport module.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.814536] RPC: Registered udp transport module.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.814575] RPC: Registered tcp transport module.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.814613] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.815714] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Jan 1 01:00:45 buildroot user.info kernel: [ 0.817214] futex hash table entries: 1024 (order: 4, 65536 bytes)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.832770] VFS: Disk quotas dquot_6.5.2
Jan 1 01:00:45 buildroot user.info kernel: [ 0.833174] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.835956] FS-Cache: Netfs 'nfs' registered for caching
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.837246] NFS: Registering the id_resolver key type
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.837368] Key type id_resolver registered
Jan 1 01:00:45 buildroot user.notice kernel: [ 0.837408] Key type id_legacy registered
Jan 1 01:00:45 buildroot user.info kernel: [ 0.840222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.840456] io scheduler noop registered
Jan 1 01:00:45 buildroot user.info kernel: [ 0.840506] io scheduler deadline registered
Jan 1 01:00:45 buildroot user.info kernel: [ 0.840867] io scheduler cfq registered (default)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.843379] BCM2708FB: allocated DMA memory f8800000
Jan 1 01:00:45 buildroot user.info kernel: [ 0.843456] BCM2708FB: allocated DMA channel 0 @ f3007000
Jan 1 01:00:45 buildroot user.info kernel: [ 0.877318] Console: switching to colour frame buffer device 240x67
Jan 1 01:00:45 buildroot user.info kernel: [ 0.898238] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
Jan 1 01:00:45 buildroot user.info kernel: [ 0.898664] uart-pl011 3f201000.uart: no DMA platform data
Jan 1 01:00:45 buildroot user.info kernel: [ 0.899860] vc-cma: Videocore CMA driver
Jan 1 01:00:45 buildroot user.info kernel: [ 0.899962] vc-cma: vc_cma_base = 0x00000000
Jan 1 01:00:45 buildroot user.info kernel: [ 0.900068] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.900185] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.900523] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
Jan 1 01:00:45 buildroot user.info kernel: [ 0.916422] brd: module loaded
Jan 1 01:00:45 buildroot user.info kernel: [ 0.926137] loop: module loaded
Jan 1 01:00:45 buildroot user.info kernel: [ 0.927269] vchiq: vchiq_init_state: slot_zero = 0xb8880000, is_master = 0
Jan 1 01:00:45 buildroot user.info kernel: [ 0.928399] Loading iSCSI transport class v2.0-870.
Jan 1 01:00:45 buildroot user.info kernel: [ 0.929407] usbcore: registered new interface driver smsc95xx
Jan 1 01:00:45 buildroot user.info kernel: [ 0.929660] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.130134] Core Release: 2.80a
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.130226] Setting default values for core params
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.130367] Finished setting default values for core params
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.330906] Using Buffer DMA mode
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.330995] Periodic Transfer Interrupt Enhancement - disabled
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.331120] Multiprocessor Interrupt Enhancement - disabled
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.331240] OTG VER PARAM: 0, OTG VER FLAG: 0
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.331343] Dedicated Tx FIFOs mode
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.331790] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb8814000 dma = 0xf8814000 len=9024
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.332018] FIQ FSM acceleration enabled for :
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.332018] Non-periodic Split Transactions
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.332018] Periodic Split Transactions
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.332018] High-Speed Isochronous Endpoints
Jan 1 01:00:45 buildroot user.debug kernel: [ 1.332344] dwc_otg: Microframe scheduler enabled
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.332405] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80405258
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.332541] WARN::hcd_init_fiq:413: FIQ ASM at 0x804055c8 length 36
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.332682] WARN::hcd_init_fiq:438: MPHI regs_base at 0xb909a000
Jan 1 01:00:45 buildroot user.info kernel: [ 1.332844] dwc_otg 3f980000.usb: DWC OTG Controller
Jan 1 01:00:45 buildroot user.info kernel: [ 1.332994] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Jan 1 01:00:45 buildroot user.info kernel: [ 1.333180] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.338584] Init: Port Power? op_state=1
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.343920] Init: Power Port (0)
Jan 1 01:00:45 buildroot user.info kernel: [ 1.349457] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan 1 01:00:45 buildroot user.info kernel: [ 1.354791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 01:00:45 buildroot user.info kernel: [ 1.360100] usb usb1: Product: DWC OTG Controller
Jan 1 01:00:45 buildroot user.info kernel: [ 1.365349] usb usb1: Manufacturer: Linux 4.0.6-v7 dwc_otg_hcd
Jan 1 01:00:45 buildroot user.info kernel: [ 1.370627] usb usb1: SerialNumber: 3f980000.usb
Jan 1 01:00:45 buildroot user.info kernel: [ 1.376734] hub 1-0:1.0: USB hub found
Jan 1 01:00:45 buildroot user.info kernel: [ 1.382034] hub 1-0:1.0: 1 port detected
Jan 1 01:00:45 buildroot user.debug kernel: [ 1.387668] dwc_otg: FIQ enabled
Jan 1 01:00:45 buildroot user.debug kernel: [ 1.387682] dwc_otg: NAK holdoff enabled
Jan 1 01:00:45 buildroot user.debug kernel: [ 1.387693] dwc_otg: FIQ split-transaction FSM enabled
Jan 1 01:00:45 buildroot user.debug kernel: [ 1.387736] Module dwc_common_port init
Jan 1 01:00:45 buildroot user.info kernel: [ 1.388145] usbcore: registered new interface driver usb-storage
Jan 1 01:00:45 buildroot user.info kernel: [ 1.393700] mousedev: PS/2 mouse device common for all mice
Jan 1 01:00:45 buildroot user.info kernel: [ 1.400040] bcm2835-cpufreq: min=600000 max=900000
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.405689] Driver 'mmcblk' needs updating - please use bus_type methods
Jan 1 01:00:45 buildroot user.info kernel: [ 1.411149] sdhci: Secure Digital Host Controller Interface driver
Jan 1 01:00:45 buildroot user.info kernel: [ 1.416413] sdhci: Copyright(c) Pierre Ossman
Jan 1 01:00:45 buildroot user.info kernel: [ 1.422194] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
Jan 1 01:00:45 buildroot user.info kernel: [ 1.427440] mmc-bcm2835 3f300000.mmc: DMA channels allocated
Jan 1 01:00:45 buildroot user.info kernel: [ 1.469712] sdhci-pltfm: SDHCI platform and OF driver helper
Jan 1 01:00:45 buildroot user.info kernel: [ 1.477886] ledtrig-cpu: registered to indicate activity on CPUs
Jan 1 01:00:45 buildroot user.info kernel: [ 1.485525] hidraw: raw HID events driver (C) Jiri Kosina
Jan 1 01:00:45 buildroot user.info kernel: [ 1.491096] usbcore: registered new interface driver usbhid
Jan 1 01:00:45 buildroot user.info kernel: [ 1.497400] usbhid: USB HID core driver
Jan 1 01:00:45 buildroot user.info kernel: [ 1.504105] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:45 buildroot user.info kernel: [ 1.509769] TCP: cubic registered
Jan 1 01:00:45 buildroot user.info kernel: [ 1.516082] Initializing XFRM netlink socket
Jan 1 01:00:45 buildroot user.info kernel: [ 1.523472] NET: Registered protocol family 17
Jan 1 01:00:45 buildroot user.notice kernel: [ 1.528878] Key type dns_resolver registered
Jan 1 01:00:45 buildroot user.notice kernel: [ 1.534579] Registering SWP/SWPB emulation handler
Jan 1 01:00:45 buildroot user.info kernel: [ 1.540824] registered taskstats version 1
Jan 1 01:00:45 buildroot user.info kernel: [ 1.546257] vc-sm: Videocore shared memory driver
Jan 1 01:00:45 buildroot user.info kernel: [ 1.551460] [vc_sm_connected_init]: start
Jan 1 01:00:45 buildroot user.info kernel: [ 1.557332] [vc_sm_connected_init]: end - returning 0
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.562589] mmc0: host does not support reading read-only switch, assuming write-enable
Jan 1 01:00:45 buildroot user.info kernel: [ 1.569470] Waiting for root device /dev/mmcblk0p2...
Jan 1 01:00:45 buildroot user.info kernel: [ 1.575212] mmc0: new high speed SDHC card at address aaaa
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.579681] Indeed it is in host mode hprt0 = 00021501
Jan 1 01:00:45 buildroot user.info kernel: [ 1.586441] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
Jan 1 01:00:45 buildroot user.info kernel: [ 1.593330] mmcblk0: p1 p2 p3
Jan 1 01:00:45 buildroot user.info kernel: [ 1.703356] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan 1 01:00:45 buildroot user.info kernel: [ 1.708793] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan 1 01:00:45 buildroot user.info kernel: [ 1.723131] devtmpfs: mounted
Jan 1 01:00:45 buildroot user.info kernel: [ 1.729111] Freeing unused kernel memory: 412K (8079f000 - 80806000)
Jan 1 01:00:45 buildroot user.info kernel: [ 1.759654] usb 1-1: new high-speed USB device number 2 using dwc_otg
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.765357] Indeed it is in host mode hprt0 = 00001101
Jan 1 01:00:45 buildroot user.warn kernel: [ 1.902384] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
Jan 1 01:00:45 buildroot user.info kernel: [ 1.920463] EXT4-fs (mmcblk0p3): mounted filesystem with journalled data mode. Opts: data=journal
Jan 1 01:00:45 buildroot user.info kernel: [ 1.970292] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Jan 1 01:00:45 buildroot user.info kernel: [ 1.976725] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 1 01:00:45 buildroot user.info kernel: [ 1.984597] hub 1-1:1.0: USB hub found
Jan 1 01:00:45 buildroot user.info kernel: [ 1.990470] hub 1-1:1.0: 5 ports detected
Jan 1 01:00:45 buildroot user.info kernel: [ 2.269663] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Jan 1 01:00:45 buildroot user.info kernel: [ 2.389930] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Jan 1 01:00:45 buildroot user.info kernel: [ 2.395396] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 1 01:00:45 buildroot user.info kernel: [ 2.403852] smsc95xx v1.0.4
Jan 1 01:00:45 buildroot user.info kernel: [ 2.473978] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a8:c1:34
Jan 1 01:00:45 buildroot user.info kernel: [ 45.920038] tun: Universal TUN/TAP device driver, 1.6
Jan 1 01:00:45 buildroot user.info kernel: [ 45.925956] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 01:00:46 buildroot user.info kernel: [ 46.172659] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Jan 1 01:00:47 buildroot user.info kernel: [ 47.808296] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Jan 1 01:00:47 buildroot user.notice kernel: [ 47.830467] random: nonblocking pool is initialized
Jan 1 00:00:56 buildroot daemon.info ifplugd(eth0)[255]: ifplugd 0.28 initializing.
Jan 1 00:00:56 buildroot daemon.info ifplugd(eth0)[255]: Using interface eth0/B8:27:EB:A8:C1:34 with driver <smsc95xx> (version: 22-Aug-2005)
Jan 1 00:00:56 buildroot daemon.info ifplugd(eth0)[255]: Using detection mode: SIOCETHTOOL
Jan 1 00:00:56 buildroot daemon.info ifplugd(eth0)[255]: Initialization complete, link beat detected.
Jan 1 00:00:57 buildroot daemon.info ifplugd(eth0)[255]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Jan 1 00:00:57 buildroot daemon.warn ifplugd(eth0)[255]: client: ifup: interface eth0 already configured
May 7 10:25:04 buildroot daemon.info ifplugd(eth0)[255]: Program executed successfully.
May 7 10:25:05 buildroot user.err : Could not read serial number
May 7 12:25:05 buildroot user.debug setclock: Try to get time from ntp.homematic.com
May 7 12:25:05 buildroot user.debug setclock: Sat May 7 12:25:05 CEST 2016
May 7 10:25:05 buildroot user.info root: Updating RF Lan Gateway Coprocessor Firmware
May 7 10:25:05 buildroot user.debug update-coprocessor: firmware filename is: coprocessor_update.eq3
May 7 10:25:05 buildroot user.info root: Updating RF Lan Gateway Firmware
May 7 10:25:05 buildroot user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
May 7 10:25:05 buildroot user.info root: Updating Wired Lan Gateway Firmware
May 7 10:25:05 buildroot user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
May 7 12:25:08 buildroot cron.err crond[131]: time disparity of 24376944 minutes detected
May 7 12:25:14 buildroot user.info update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): faild
May 7 12:25:18 buildroot user.info update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): faild
May 7 12:25:19 buildroot user.info update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): faild
May 7 12:25:21 buildroot user.err update-coprocessor: CoprocessorUpdate::startApplication():Could not start Coprocessor application.
May 7 12:25:21 buildroot user.err update-coprocessor: Could not start Application, maybe no application on device, do update with dummy Version: 0.0.0
May 7 12:25:21 buildroot user.info update-coprocessor: Update necessary, installed: 0.0.0, avaiable 1.4.1
May 7 12:25:22 buildroot user.info update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): faild
May 7 12:25:23 buildroot user.err update-coprocessor: CCU2CommControllerMod::startCoprocessorAppThreadFunction(): Trying to send SYSTEMCMD_STARTBOOTLOADER failed 3 times.
May 7 12:25:23 buildroot user.info update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): faild
May 7 12:25:24 buildroot user.info update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): faild
May 7 12:25:28 buildroot user.info update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): faild
May 7 12:25:30 buildroot user.err update-coprocessor: CCU2CommControllerMod::startCoprocessorAppThreadFunction(): Trying to send SYSTEMCMD_STARTBOOTLOADER failed 3 times.
May 7 12:25:33 buildroot user.err update-coprocessor: CoprocessorUpdate::startBootloader():Could not start Coprocessor bootloader.
May 7 12:25:37 buildroot user.info update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): faild
May 7 10:25:37 buildroot daemon.info init: starting pid 364, tty '/dev/tty1': '/sbin/getty -L tty1 0 vt100 '
May 7 12:25:45 buildroot local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64 [../Platform/DOM/iseESPexec.cpp (11622)]
May 7 12:25:47 buildroot user.crit rfd: CCU2CommController::init(): Init failed. Cannot start coprocessor application.
May 7 12:25:47 buildroot user.err rfd: CCU2CoprocessorCommand::parseSystemCommandResponse(): Not a response status. Incoming message dropped.
May 7 12:25:48 buildroot user.err rfd: () CCU2CommController::setCSMACAEnabled(): Error disabling CSMA/CA.
May 7 12:25:48 buildroot user.err rfd: No BidCoS-Interface available
May 7 12:25:48 buildroot local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [../Platform/DOM/iseXmlRpc.h (281)]
May 7 12:25:48 buildroot local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","1007"} result= nil [../Platform/DOM/iseXmlRpc.cpp (2621)]
May 7 12:25:48 buildroot local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [../Platform/DOM/iseXmlRpc.cpp (1219)]
May 7 12:25:48 buildroot local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=BidCos-RF [../Platform/RT/iseRTHss.cpp (163)]
May 7 12:25:48 buildroot local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [../Platform/DOM/iseXmlRpc.h (281)]
May 7 12:25:48 buildroot local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","1008"} result= nil [../Platform/DOM/iseXmlRpc.cpp (2621)]
May 7 12:25:48 buildroot local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [../Platform/DOM/iseXmlRpc.cpp (1219)]
May 7 12:25:48 buildroot local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=VirtualDevices [../Platform/RT/iseRTHss.cpp (163)]
May 7 12:26:27 buildroot local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64 [../Platform/DOM/iseESPexec.cpp (11622)]

[JRiemann]

Hallo!
Die Version des Raspberry Matic die Du geladen hast wird von mir auf OneDrive angeboten.
Ich habe diese Version nach dieser Anleitung: http://homematic-forum.de/forum/viewtop ... 17#p236751 auf einem Raspberry 3 mit Funkmodul im Einastz. Die Einrichtung erfolgte strikt nach Anleitung und verlief ohne Probleme.
Leider kenne ich mich mit Linux absolut nicht aus und kann dabei nicht helfen.
Das Raspberry Matic gab es bis vor kurzem direkt bei eq3 auf der Downloadseite. Seit ca. 1 Woche ist der Server down. Sobald es eine neuere Version gibt wird das hier im Forum bekannt gemacht.
Hast Du schon mal versucht den gesamten Installationsprozess erneut durchzuführen? Evtl hat sich beim 1. Mal ein Fehler eingeschlichen.

Grüße!
Jörg

[ElDiablo1985]

Habe es bereits erneut installiert sowie auch danach Java erneut installiert. Leider kommt die Fehlermeldung immer noch.

Das du es bei OneDrive hochgeladen hast war Super. Danke Dir dafür.

Nur leider weiß ich jetzt nicht ob ich mir beim Löten das Modul zerschossen habe und mir ein neuen bestellen muss, oder es an was anderen liegt. Habe leider nur einen Raspberry2 zum Testen.