ich habe das Problem, dass ich meine HmIP-Broll mittels Homematic Manager anlernen kann, sie aber nicht in home assistant als "entity" auftauchen.
Für einen Tipp voran das liegen kann wäre ich sehr dankbar.
Hier noch ein paar weitere Infos:
Nutze Raspberry Pi mit USB Stick HmIP-RFUSB.
Home Assistant und Add-on homematic (Ver. 8.3) sind auf dem neuesten Versionsstand.
Es gibt eine Fehlermeldung, die unter Entwicklungsumgebung zu sehen ist:
Setup of homematic is taking over 10 seconds.
23:07 __main__.py (WARNING)
Failed to initialize proxy
23:07 components/homematic/__init__.py (WARNING) - message first occured at 23:07 and shows up 3 times
Config des homematic add on
Code: Alles auswählen
{
"rf_enable": true,
"rf": [
{
"type": "CCU2",
"device": "/dev/ttyAMA0"
}
],
"wired_enable": false,
"wired": [
{
"serial": "xy",
"key": "abc",
"ip": "192.168.0.0"
}
],
"hmip_enable": true,
"hmip": [
{
"type": "HMIP_CCU2",
"device": "/dev/ttyUSB0"
}
]
}
Code: Alles auswählen
# Ports have to be identicalt as defined in add-on "HomeMatic OCCU" under "Network" and config
homematic:
interfaces:
rf:
host: core-homematic
port: 2001
wired:
host: core-homematic
port: 2000
hmip:
host: core-homematic
port: 2010
Freue mich sehr über Hilfe.
Danke und Gruß,
Jens