Neue Firmware PSM / FSM16

[MichaelN]

Es gibt eine neue Firmware für o.g. Geräte.Gibt es dazu ein Changelog?

Alt / Neu
HMIP-PSM 2.6.2 2.18.14
HmIP-FSM16 1.6.2 1.18.14

[Baxxy]

Gibt es dazu ein Changelog?

Na das steckt doch immer in der Firmware-Update Datei... Aber hier, bitteschön.

Code: Alles auswählen

C H A N G E L O G
-----------------

Please note: Only use the firmware file in connection with the current software-version of the CCUx!

Device:		HmIP-FSM - Switch Actuator and Meter - flush mount

Company:	eQ-3, Maiburger Str. 29, 26789 Leer, Germany

Version 1 (2 for pluggable).18.14 - 20200715
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Made some routines for testing the relay to ram functions. 

** Improvement
   * 

** Comments
   *


Version 1 (2 for pluggable).18.12 - 20200622
--------------------------------------------------------------
** Bugfix
   * After inclusion, device sends bidirectional status telegrams
     to the CCU after approx. 120s


Version 1 (2 for pluggable).18.10 - 20200527
** Bugfix
   * BSM sends Statusframes with ARR every 3 minutes in case that 
     SHC did not acknowlegeded
   * RSSI-value in AnswerFrame always 0dBm
   * BSM does not respond to a keystroke if a switching command was previously
     received on the actuator channel from an unknown link partner
     
** Modification
   * Update to HMOS 1.46.1

Version 1 (2 for pluggable).18.6 - 20200309
** Bugfix
   * Device sends answers-frame on a TimeInfo from AC to "any-router"-address
   * Device sends ack frames if ARR bit is not set

Version 1 (2 for pluggable).18.4 - 20200226
** Bugfix
   * Channel keys without function if external link
     partner could not be reached and DisableMSGToAC = true
   * Device sends status info with "Level with profile Information" 
     instead of "Binary with profile Information"
   * Parameter DisableMSGtoAC without function
     if multicast address is set as system partner
   * If the button is pressed to fast after restart ,
     the device does not switch permanently any more.	
     
Version 1 (2 for pluggable).18.2 - 20200212
** Bugfix
   * Device running into duty cycle if CCU or HAP is not available
   * Update status info sending rules
   * Configuration is not longer shown on LED, 
     if a key is pressed while getting config data

** New Feature
   * Using status info module
   
Version 1 (2 for pluggable).16.0 - 20191121
** Bugfix
   * Fixed inverted LEDs in bootloader (V1.14.2)

** Modification
   * Update HMOS to 1.44.2

** New Feature
   * Support of HmIP-FSI16

Version 1 (2 for pluggable).15.10 to 15.24 - 20191106 

** Bugfix
   * If possible, send multicasts only to PARTNER_ALL_WIRED_DEVICES
     instead of to PARTNER_ALL_DEVICES.
   * Device reboots if relay has to be switched
   * fixed bug in device behavior, if message to ac is disabled
   * fixed bug if factory reset is aborted
** Modification
   * Modify emlib makro calls due to changes in updated emlib
   * Update HMOS to 1.43.41
   * Update Bootloader to 1.14

** New Feature
   * Add support for switch inputs
   * Add relay count feature
   
Version 1 (2 for pluggable).15.8 - 20190522
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed a bug in the zero crossing module due to new 
     version of emlib. 

** Improvement
   * 

** Comments
   *
   
   
Version 1 (2 for pluggable).15.6 - 20190424
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * PowerUpAction is executed although the parameters
      are not yet loaded. 

** Improvement
   * 

** Comments
   *
   
   
Version 1 (2 for pluggable).15.4 - 20190329
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Modify event counter check to meet current specification 

** Improvement
   * 

** Comments
   *
   
   
Version 1 (2 for pluggable).15.2 - 20190308
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * If the switch-on and switch-off times in the Easy
     Profile are set to "Not active" at the same time, the device hangs up. 

** Improvement
   * 

** Comments
   * Update HMOS to 1.41.58
   
   
Version 1 (2 for pluggable).15.0 - 20190227
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * FSI16 switches relay to fast if mains power fails (not waiting min
     200 ms) as the the ZCD detection without measuring IC produces IRQs
     only for positive half waves. Timer now has an interval of 20 ms,
     so the relay is switch only if 220 ms has elapsed. 

** Improvement
   * 

** Comments
   * update HMOS to 1.41.45
   
   
Version 1 (2 for pluggable).13.12 - 20181116
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed another potentially deadlock.

** Improvement
   * 

** Comments
   * 
   
   
Version 1 (2 for pluggable).13.10 - 20181115
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Race condition may cause deadlock

** Improvement
   * check of keypress counter and application sequence counter updated

** Comments
   * Update HMOS to 1.39.1
   
   
Version 1 (2 for pluggable).13.8 - 20181026
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Stopped sending inclusion request on each long keypress 
     repetition.
	 
** Improvement
   * 
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).13.6 - 20180813
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Corrected sending of Status-Info 
     frames if the recipent (central or statusinfo receiver)
     is not available.
	 
** Improvement
   * 
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).13.4 - 20180628
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Corrected bug with weekprogramm 
     at the day of daylight changeover.
	 
** Improvement
   * 
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).13.2 - 20180622
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Corrected bug with creating direct 
     execution frames in the weekprogramm.
	 
** Improvement
   * 
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).13.0 - 20180605
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * 
	 
** Improvement
   * 
   
** Comments 
   * Increased version number due to creation of a tag.


Version 1 (2 for pluggable).11.17 - 20180601
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Increased HMOS version to 1.30.0 to be able to route 
     inclusion frames (with routing actuators).
	 
** Improvement
   * Added functionality and configuration 
     parameters to do "OFF-Actions" at powerup.
   
** Comments 
	 
	 
Version 1 (2 for pluggable).11.16 - 20180309
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * 
	 
** Improvement
   * 
   
** Comments 
   * Changed the default 
     value for the long keypress from 4s to 0,4s. Did necessary 
     modifications to leave the pairing function as it is.
   
   
Version 1 (2 for pluggable).11.14 - 20180223
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Added reset of measurement array after switching 
     to prevent next measurement to be outdated. An outdated 
     array may cause wrong switching!
	 
** Improvement
   * 
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).11.12 - 20180216
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Corrected timeout for sequence counter (from 10 to 2 minutes).
	 
** Improvement
   * 
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).11.10 - 20180214
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Corrected switching direction if switching with current 
     detection is disabled.
	 
** Improvement
   * 
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).11.8 - 20180213
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Added sending of unknown RSSI value in two cases.
	 
** Improvement
   * Added new operation mode (minimum HMOS 1.24.0 necessary)
   * Changed counting of event_counter to new mechanism
     (boot:0; other:[1..252]).
   * Changed checking of event_counter to new mechanism.

** Comments 
   * 
  
  
Version 1 (2 for pluggable).11.6 - 20180205
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed wrong reset of a pending flag if disable_msg_to_ac was set.
	 
** Improvement
   * Corrected some comments.
   
** Comments 
* Changed default value for POWERUP_ONTIME from 0x00 to 0xFF.
   
   
Version 1 (2 for pluggable).11.4 - 20171219
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed bug with fast switching
	 
** Improvement
   *
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).11.2 - 20171103
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed a bug with sending statusframes with ACK and ARR bit
	 
** Improvement
   *
   
** Comments 
   * 


Version 1 (2 for pluggable).11.0 - 20171013
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed a bug with sending statusframes at actuartors 
     with powermeter function.
	 
** Improvement
   *
   
** Comments 
   * Increased version number due to creation of a tag.


Version 1 (2 for pluggable).9.2 - 20171006
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Corrected behaviour of weekprogrammm for neagtive coordiantes.
   * Changed behaviour of init routines in powermeter- and switch-task.
   * Fixed behaviour of sending statusmessages 
     for multichannel devices. 
	 
** Improvement
   
** Comments 
   
   
Version 1 (2 for pluggable).9.1 - 20170908
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix

** Improvement
   * new parameter for suppressing messages to Access Controller
   
** Comments 


Version 1 (2 for pluggable).8.12 - 20170719
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B

** Bugfix
   * Statusmessage handling corrected

** Improvement
   * Statusmessage handling optimized for multichannel devices
   * No reboot after aborded factory reset
   * new telegrams are only send if previous telegram is acked or timed out
   
** Comments 
   * Use of bootloader 1.10.0
   
   
Version 1 (2 for pluggable).7.6 - 20170530
--------------------------------------------------------------
 
** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
 
** Bugfix
   * ARR timeout is not observed 
      with the Info and TimeInformation frames
   * LowBat Bit is not set in the status Info
      
** Improvement
   * DataType Operating Voltage send with StatusInfo
   
** Comments 
   * 
    
    
Version 1 (2 for pluggable).7.5 - 20170519
--------------------------------------------------------------
 
** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
 
** Bugfix
   * The device reacts with the same 
     event counter for an unconditional switch command.
   * Device is permanently awake.
   
** Comments 
   * 

   
Version 1 (2 for pluggable).7.4 - 20170427
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * Fixed a bug with not acting device if the 
     channel key was pressed at a included device.

** Comments 
   *
   
   
Version 1 (2 for pluggable).7.3 - 20170426
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * Increased the power to trigger a simulated 
     keypress from 0.1W to 1 W.
   * Value for the new powerstatus is saved after 
     being stable for two measurements.
   * Corrected default duration of weekprogramm to 0xFF.
   * Corrected / Optimised sending of a normal ACK/NACK.

** Comments 
   *
   
   
Version 1 (2 for pluggable).7.2 - 20170425
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix

** Comments 
   * Removed ramp time from the weekprogram.
   * Added sending of statusframes for the weekprogram.
     (After inclusion, cyclic and on request)
   * Corrected a bug with inhibit channels.
	  
	  
Version 1 (2 for pluggable).7.1 - 20170413
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix

** Comments 
   * Added lock feature to weekprogramm channel.
   * Added delayed weekprogram status info to status info
      receiver after change of lock channels.
   
   
Version 1 (2 for pluggable).7.0 - 20170405
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * Increased the pulse for switching the relais 
     from 30 ms to 75 ms.

** Comments 
   * Increased version due to creation of a tag.


--- END OF FILE ---

[MichaelN]

Habe mich nicht getraut den link anzuklicken. Habe schon von zuvielen missratenen Updates gelesen

[MichaelN]

Aber wenn ich mir das log ansehe und meine aktuelle Versionsnummer... Kann das denn sein, das seit 2017 keine Updates ausgespielt wurden?

[Baxxy]

Habe mich nicht getraut

Nur keine Scheu, du weißt doch das eQ-3 weiß was sie tun.
Man läd die Files ja eh erstmal auf den PC, da kann man erstmal mit Winrar etc. reinschauen.
2 PSM's sind hier schon durch. 12h pro Teil am extra eingerichtetem nacktem System. Keine Auffälligkeiten bisher.

[Baxxy]

Kann das denn sein, das seit 2017 keine Updates ausgespielt wurden?

Joa, sieht so aus. Ich kam auch von 2.6.2 . Momentan hauen die ja einiges an FW raus. Von den WTH-2 / STHD Updates lasse ich aber auf dem Live-System die Finger. Die Blinkerei geht mir hier am Testsystem schon auf den Keks.

[Slice]

Hallo,

also ich installiere auch gerade auf den HMIP-PSM die neue Firmware.
Aber ehrlich, das das nun schon bald 2 Tage läuft für 2 Geräte ist doch nicht normal.
Ich habe nicht all zuviele IP-Geräte in meiner Installation, aber mal als Beispiel mein Dutycycle:

Am 24.11. habe ich das Update angestartet, der erste PSM ist gestern um 20:30 fertig geworden, der 2te PSM läuft noch..
Zum Glück brauch ich die gerade nicht.. aber komfortabel ist was anderes..

Grüße,
Slice

[Baxxy]

Aber ehrlich, das das nun schon bald 2 Tage läuft für 2 Geräte ist doch nicht normal.

Dem stimme ich zu. Aber das wurde ja schon x-mal hier im Forum debattiert.
Auf meinen Hauptsystem gehe ich da nach "fire and forget" vor. Hochladen, vergessen und irgendwann mal... huch was ist denn mit den Updates.

Bei meinem Test-Spiele-System schaue ich normalerweise genauer hin. Ab da dieses kürzlich an Kammerflimmern verstarb habe ich die PSM's einzeln an einer CCU 3.53.34 angelernt und geupdated. Das hat pro Gerät ca. 12h gedauert.

Auf dem Hauptsystem läuft seit Mitternacht das Update für 6 FSM's.
Vielleicht melde ich in einigen Wochen Erfolg.

[SabineT]

Das Update meiner 5 PSM hat soweit bei mir geklappt, aber seit dem melden 2 der PSM als Servicemeldung "Konfigurationsdaten stehen zur Übertragung an" Wenn ich bei den betroffenen Geräten die Einstellungen neu Übernehmen will kommt dann "Die Übertragung der Daten zum Gerät konnte nicht ordnungsgemäß durchgeführt werden..." Die Geräte funktionieren aber normal, ich kann z.B. den Schaltaktor ein/aus schalten, auch werden am Kanal 6 die Werte angezeigt!
Eine Wiederherstellung der Werkseinstellungen hat auch keine Änderung gebracht. Die Servicemeldungen bleiben bestehen

Sabine

[MichaelN]

Mach sie mal eine zeit lang stromlos. Habe irgendwo gelesen das es geholfen hat.