Einspeiseleistung von Photovolaik erfassen
Moderator: Co-Administratoren
-
- Beiträge: 9649
- Registriert: 27.04.2020, 10:34
- System: CCU
- Hat sich bedankt: 697 Mal
- Danksagung erhalten: 1617 Mal
Re: Einspeiseleistung von Photovolaik erfassen
Ja, aber es war hier doch auch von HMIP-PSM die Rede?!
LG, Michael.
Wenn du eine App zur Bedienung brauchst, dann hast du kein Smarthome.
Wettervorhersage über AccuWeather oder OpenWeatherMap+++ Rollladensteuerung 2.0 +++ JSON-API-Ausgaben auswerten +++ undokumentierte Skript-Befehle und Debugging-Tipps +++
Wenn du eine App zur Bedienung brauchst, dann hast du kein Smarthome.
Wettervorhersage über AccuWeather oder OpenWeatherMap+++ Rollladensteuerung 2.0 +++ JSON-API-Ausgaben auswerten +++ undokumentierte Skript-Befehle und Debugging-Tipps +++
-
- Beiträge: 41
- Registriert: 17.04.2021, 16:15
- System: Alternative CCU (auf Basis OCCU)
- Hat sich bedankt: 3 Mal
- Danksagung erhalten: 3 Mal
Re: Einspeiseleistung von Photovolaik erfassen
Stimmt natürlich, hatte ich gerade nicht so aufm Schirm.
- Baxxy
- Beiträge: 10766
- Registriert: 18.12.2018, 15:45
- System: Alternative CCU (auf Basis OCCU)
- Hat sich bedankt: 602 Mal
- Danksagung erhalten: 2201 Mal
Re: Einspeiseleistung von Photovolaik erfassen
Auch ja... wird aber noch übertragen.
Das Changelog liest sich ganz nett...
C H A N G E L O G
-----------------
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIP-PSM - Homematic IP Pluggable Switch and Meter
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1 (2 for pluggable).22.8 - 2022-01-25
--------------------------------------------------------------
** Bugfix
* Incorrect output switching under some unfavourable timing and profile conditions
Version 1 (2 for pluggable).22.6 - 2022-01-24
--------------------------------------------------------------
** Improvement
* Improved calibration of the internal rc oscillator (HmIP-FSM/HmIP-FSM16)
Version 1 (2 for pluggable).22.4 - 2022-01-14
--------------------------------------------------------------
** Bugfix
* Error in emergency shutoff functionality
** Modification
* activate power failure detection for all devices with powermeter, zero crossing switching or bistable relays
Version 1 (2 for pluggable).22.2 - 2021-12-09
--------------------------------------------------------------
** Bugfix
* add separate handling of overcurrent shutoff to ensure that output is switched off
* fixed error in emergency shutoff handling for devices with more than one channel
** Modification
* update HMOS to 1.64.0
Version 1 (2 for pluggable).22.0 - 2021-10-08
--------------------------------------------------------------
** Bugfix
* The time information telegram does not contain a note about the sommer / winter time change.
* Timeout for first factory reset step is too long
* Device sends RequestConfigUpdate if received a MacAck from a LinkPartner
** New Feature
* Transmitting negative power (only measuring actuators)
* Overcurrent detection and shutoff (HmIP-PSM-2/HmIP-PS-2)
Version 1 (2 for pluggable).20.6 - 2021-10-13
--------------------------------------------------------------
** Bugfix
* Fixed Wrong definition of overload error flag
* Fixed error if current is to big (e.g. 26 A -> if power is to big the power meter chip generates an power overflow, this caused a reset of power and current to 0)
** New Feature
* Overcurrent detection and shutoff for switch actuators with metering (HmIP-PSM/HmIP-BSM/HmIP-FSM/HmIP-FSM16)
Version 1 (2 for pluggable).20.4 - 2021-09-16
--------------------------------------------------------------
** Bugfix
* The daylight saving time information is now taken from time information telegram, if included.
** Modification
* Device sends RequestConfigUpdate if received a MacAck from a LinkPartner
Version 1 (2 for pluggable).20.2 - 2021-08-25
--------------------------------------------------------------
** Bugfix
* Update UART communication lib to fix a bug in power meter communication.
Version 1 (2 for pluggable).20.0 - 2021-07-22
--------------------------------------------------------------
** Bugfix
** New Feature
* Support of HmIP-BSM-I
* Reset of power meter chip if the communication is broken.
Grüße... Baxxy
- Raspberry Pi 4 als Homematic-Zentrale - Tipps und Informationen
- Analysescript für genutzte Funk-Adressen, Funkmodul-Hardware und Zentralen Hardware
- NANO CUL 868MHz - Stick zum AskSin Analyzer XS umflashen (Anleitung für ArduinoIDE unter Windows)
- Firmware Updates für IP-Aktoren / Sensoren... Info's, Tipps und Sonstiges
- CCU funkt nicht - CarrierSense (CS) Probleme erkennen und lösen
-
- Beiträge: 278
- Registriert: 01.11.2021, 14:32
- System: CCU und Access Point
- Hat sich bedankt: 86 Mal
- Danksagung erhalten: 23 Mal
Re: Einspeiseleistung von Photovolaik erfassen
Ich habe jetzt meine beiden Psm aktualisiert. Bei einer Psm war nach dem Update der Wochenplan weg. Bei der anderen ist noch alles so wie vorher. Komisch.
CCU3 mit RaspberryMatic