Code: Alles auswählen
R E L E A S E N O T E S
-------------------------
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HMIP-WRC2 - Wall-mount Remote Control - 2-button
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1.18.0 2022-02-14
--------------------------------------------------------------
** Bugfix
* FactoryResetTiming to long
** New Feature
* Change of the bidirectional cyclical status transmission interval to extend the battery lifetime.
* Support of "Security Plus" - Disable active alarm system although the cloud is offline
** Improvement
* General improvements - Code optimisation
Version 1.16.2 - 2020-10-26
--------------------------------------------------------------
** Bugfix
* If AC is not responding on startup, the device is blocking until routing is done.
A triggered switch command is sent after that but without optical feedback.
* Device is not waiting the ARR timeout after optical feedback (only devices with optical feedback at MAC level)
Version 1.16.0 - 2020-10-16
--------------------------------------------------------------
** New Feature
* add support for optical feedback after MAC-sending is done (all MAC-ACKs received or MAC-Ack failure)
Version 1.14.10 - 2020-07-09
--------------------------------------------------------------
** Bugfix
* USC with long keystroke is only sent after the key is released (if more Groups are activ)
* RemoteControl freeze after 2nd long keystroke on same channel ((same fix as for bug in the line before)
* Device sends further switch command after ReportLinkPartnerProblem was send
* STOP-Button retriggers SwitchCommand which was send before from other Channel (same fix as for bug in the line before)
Version 1.14.8 - 2020-07-02
--------------------------------------------------------------
** Bugfix
* If a burst partner is linked to channels > 6, a long keypress leads to a deadlock
* Device send USC to Linkpartner on long keystroke as long button is pressed
Version 1.14.6 - 2020-06-18
--------------------------------------------------------------
** Bugfix
* fixed wrong check of stop push button for
Version 1.14.4 - 09.06.2020
--------------------------------------------------------------
** Bugfix
* Device teststatus not longer set to 0 by default
Version 1.14.2 - 29.05.2020
--------------------------------------------------------------
** Bugfix
* Device sends switchCmd with long keystroke only on botton release to HmIP link partner
* If add a LP to Channel < 7, Linkpartner on channel > 6 will not work anymore
Version 1.14.0 - 08.05.2020
--------------------------------------------------------------
** Modification
* support for HmIP-HDRC
Version 1.12.4 - 29.11.2019
--------------------------------------------------------------
** Modification
* support for HmIP-WRCCR
Version 1.10.2/1.10.4 - 20.11.2020/24.11.2021
--------------------------------------------------------------
** Bugfix
* FactoryResetTiming to long
** New Feature
* Change of the cyclical transmission interval to extend the battery lifetime.
* Update HMOS to 1.40.0
Version 1.10.0 - 02.03.2018
--------------------------------------------------------------
** Bugfix
* Sendeverhalten bei langem Tastendruck fehlerhaft
* Fehler im Sendeverhalten, wenn Partner spät antworten
** New Feature
* HmIPW: Neuer Operation-Mode
* Zentralen basierte Lösungen und Lösungen ohne Zentrale (Installateur)
** Improvement
* Alarmbackup durchführen wenn Access Point/Zentrale ein NAK auf ein
Unconditional Switch Command sendet
* update HMOS to V1.26.0
--- END OF FILE ---