vor ca. einer Woche wurde mir auf der CCU die Firmware 2.2.000 für den HmIP-WTH (erste Generation) angeboten, welche noch nicht auf der Downloadseite von EQ3 angeboten wird.
Ich habe es gewagt alle 13 WTH upzudaten, hat soweit alles funktioniert bis auf die folgenden "Nebenwirkungen":
- Die WTH sind, wie ich schon erwartet hatte, nach einem Neustart der CCU aus der Geräteliste verschwunden und im Posteingang gelandet. Dabei wurden die Gerätenamen zurückgesetzt.
- Vor dem Neustart hat alles soweit funktioniert, bis auf drei Thermostate bei denen die Solltemperatur auf Werkseinstellungen zurückgesetzt wurde. In der CCU wurde jedoch der alte von mir programmierte Wert angezeigt. Geholfen hat hier die Temperatur auf einen beliebigen Wert in der CCU zu ändern, dann an den WTH zu senden und anschließend die Korrekte Temperatur wieder einzustellen.
Gruß
Paul
Changelog:
Code: Alles auswählen
Achtung! Bitte verwenden Sie die Firmware-Datei nur in Verbindung mit der CCU2 ab
Version 2.29.22
Please note: Only use the firmware file in connection with the CCU2 from version 2.29.22
Changelog: HmIP-WTH, HmIP-STH, HmIP-STHD
Version 2.2.000 - 20170918
----------------------------------------------------------------------------------------
Version:
Application: 2.2.000
Bootloader: 1.8.000
Library: 1.20.004
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Correction in Paging-Module HMOS-Library
Catched erros which could occure after an OTAU update to a newer paging module.
* Correction for the Optimum Start Stop function
After activating the optimum start stop function it is now executed correctly.
** Modification
* Change to Version 2.2.000
Parameter extension for installer solution.
With the help of the new parameter "DISABLE_MSG_TO_AC" all transmissions to the
central address are suppressed. Also to the status receiver address if this is the
same as the central address.
Version 2.0.000 - 20170721
----------------------------------------------------------------------------------------
Version:
Application: 2.0.002
Bootloader: 1.8.000
Library: 1.20.003
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Correction when trying changing from manu mode to auto mode if the time is not known.
In manu mode boost is not activated by a long button press if the time is not known.
** Modification
* Change to Version 2.0.002
Version 2.0.000 - 20170720
----------------------------------------------------------------------------------------
Version:
Application: 2.0.000
Bootloader: 1.8.000
Library: 1.20.003
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Correction for set point temperature update after weekprogram configuration.
If window open is detected (extern/intern) and during this time a new week program
is transmitted to the device, the device updated the set point temperature after
window close by using the new week program set point temperature.
* Extension for the Quick Veto Function.
If the quick veto function is active, the remaining time is transferred in the
status telegram.
* Behavior after aborting the factory reset.
If the factory reset is aborted or not executed until the end, the device performs
a reboot after the termination or after the timeout.
* Correction when trying changing from manu mode to auto mode if the time is not known.
In manu mode boost is not activated by a long button press if the time is not known.
* Abort of Quick Veto by "Duration = 0".
If Quick Veto is active, Quick Veto can be aborted by the radio command
"Duration = 0". The device answers the radio telegram with an "Ack".
** Modification
* Change to Version 2.0.000
Version 1.8.004 - 20170328
----------------------------------------------------------------------------------------
Version:
Application: 1.8.004
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Bug fixing optical system LED flashing
The corresponding system LED flashing sequence has not been reproduced correctly,
if the factory set was not be executable, because of the the LOCAL_RESET_DISABLE
bit is set.
* The hour was not taken into account during the transition from summer to winter time
or from winter to summer time, so the conversion took place at 00:00.
** Modification
* Change to Version 1.8.004
Version 1.8.003 - 20170215
----------------------------------------------------------------------------------------
Version:
Application: 1.8.003
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Bug fixing in temperature week program
If one daily temperature profiles consist of only one switch time point, the switch
time point is skipped by midnight of the next day.
** Modification
* Change to Version 1.8.003
Version 1.8.002 - 20170227
----------------------------------------------------------------------------------------
Version:
Application: 1.8.002
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Improved handling at quick-veto
Function is communicated to the link partner via a DEC-Command with "Duration-Time".
** Modification
* Change to Version 1.8.002
Version 1.8.001 - 20170127
----------------------------------------------------------------------------------------
Version:
Application: 1.8.001
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* After bug fix no more cyclic messages were sent after a manual operation
** Modification
* Change to Version 1.8.001
Version 1.8.000 - 20170124
----------------------------------------------------------------------------------------
Version:
Application: 1.8.000
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* New data packages will not be sent until the current data transmission has finished.
** Modification
* Change to Version 1.8.000
* Implementation of Quick-Veto-Function
Version 1.6.000 - 20160816
----------------------------------------------------------------------------------------
Version:
Application: 1.6.000
Bootloader: 1.8.000
Library: x.x.xxx
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* The Application_Sequence_Number for TIME_INFO_REQUEST is increment after sending.
* If the device wait for incoming data, it don't responce to other requests.
** Modification
* Change to Version 1.6.000
Version 1.5.001 - 20160608
----------------------------------------------------------------------------------------
Version:
Application: 1.5.001
Bootloader: 1.x.xxx
Library: 1.x.xxx
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* If the device is linked with a Remote-Control-Unit and the Parameter "ON_TIME" is
set, the temperature "TEMPERATURE_RC" is hold minimum for this time (also the time
is > 1 Minute).
* Expansion of the channel list, the device is linkable with a floor terminal
block (FAL).
** Modification
* Change to Version 1.5.001
* Some changes for testtunner for the new component HmIP-STHD
* Some changes for testtunner for the new component HmIP-STH
Version 1.4.001 - 20160531
----------------------------------------------------------------------------------------
Version:
Application: 1.4.001
Bootloader: 1.8.000
Library: 1.16.000
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Window open temperature isn't overwritten, when activating the party function.
** Modification
* Change to Version 1.4.001
Version 1.2.013 - 20151209
----------------------------------------------------------------------------------------
Version:
Application: 1.2.013
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.2.013
Version 1.2.012 - 20151209
----------------------------------------------------------------------------------------
Version:
Application: 1.2.012
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Window open temperature isn't overwritten, when activating the party function.
** Modification
* Change to Version 1.2.012
Version 1.2.011 - 20151111
----------------------------------------------------------------------------------------
Version:
Application: 1.2.011
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.2.011
Version 1.2.010 - 20151111
----------------------------------------------------------------------------------------
Version:
Application: 1.2.010
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* In combination with multiple routers the device is reached via radio all the time.
* If a DEC is send with "actual temperature" and "4.5°C" as setpoint the device
performs nothing.
** Modification
* Change to Version 1.2.010
* Change in library -> m_rx_options.header.header.bidi to
m_rx_options.header.header.arr
* Modification of full-rx-timeout in the application for router functionality.
* Modification holiday period (start and end) must be transmitted as a status for
CCU2 integration.
Version 1.2.009 - 20150824
----------------------------------------------------------------------------------------
Version:
Application: 1.2.009
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.2.009
Version 1.2.008 - 20150824
----------------------------------------------------------------------------------------
Version:
Application: 1.2.008
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* All leap years are recognized.
** Modification
* Change to Version 1.2.008
Version 1.2.007 - 20150702
----------------------------------------------------------------------------------------
Version:
Application: 1.2.007
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.2.007
Version 1.2.006 - 20150702
----------------------------------------------------------------------------------------
Version:
Application: 1.2.006
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* At window-open, a manually change on the device, is now transferred correctly from
TRV link partners.
** Modification
* Change to Version 1.2.006
Version 1.2.005 - 20150625
----------------------------------------------------------------------------------------
Version:
Application: 1.2.005
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.2.005
Version 1.2.004 - 20150625
----------------------------------------------------------------------------------------
Version:
Application: 1.2.004
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* Window status of SWD link partner is reset when the link partner is deleted.
** Modification
* Change to Version 1.2.004
Version 1.2.003 - 20150624
----------------------------------------------------------------------------------------
Version:
Application: 1.2.003
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.2.003
Version 1.2.002 - 20150624
----------------------------------------------------------------------------------------
Version:
Application: 1.2.002
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* If the party mode is abort from the HAP, the party mode is immediately leave.
** Modification
* Change to Version 1.2.002
Version 1.2.001 - 20150612
----------------------------------------------------------------------------------------
Version:
Application: 1.2.001
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.2.001
Version 1.2.000 - 20150612
----------------------------------------------------------------------------------------
Version:
Application: 1.2.000
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.2.000
* Changeover the project to the hmos library
Version 1.0.017 - 20150624
----------------------------------------------------------------------------------------
Version:
Application: 1.0.017
Bootloader: 1.8.000
HMOS: 1.6.002
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.0.017
Version 1.0.016 - 20150624
----------------------------------------------------------------------------------------
Version:
Application: 1.0.016
Bootloader: 1.8.000
HMOS: 1.6.002
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* If the party mode is abort from the HAP, the party mode is immediately leave.
** Modification
* Change to Version 1.0.016
Version 1.0.015 - 20150519
----------------------------------------------------------------------------------------
Version:
Application: 1.0.015
Bootloader: 1.4.001
HMOS: 1.6.002
** Related Hardware
* 1434158F, 1434177A
** Modification
* Change to Version 1.0.015
Version 1.0.014 - 20150423
----------------------------------------------------------------------------------------
Version:
Application: 1.0.014
Bootloader: 1.4.001
HMOS: 1.6.002
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* After inclusion the device send cyclic status messages.
** Modification
* Change to Version 1.0.014
Version 1.0.012 - 20150422
----------------------------------------------------------------------------------------
Version:
Application: 1.0.012
Bootloader: 1.4.001
HMOS: 1.6.002
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* After inclusion a Time-Date-Request is started.
** Modification
* Change to Version 1.0.012
Version 1.0.010 - 20150421
----------------------------------------------------------------------------------------
Version:
Application: 1.0.010
Bootloader: 1.4.001
HMOS: 1.6.002
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* The year 2100 and 2200 are not intercalary years.
* Request of Date and Time only start if the TRX is not busy.
** Modification
* Change to Version 1.0.010
Version 1.0.008 - 20150416
----------------------------------------------------------------------------------------
Version:
Application: 1.0.008
Bootloader: 1.4.001
HMOS: 1.6.002
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* If "LowBat" and a Link-Partner doesn't send a answer for a DEC, the LED flash first
600ms red and after that 200ms orange.
** Modification
* Change to Version 1.0.008
Version 1.0.006 - 20150415
----------------------------------------------------------------------------------------
Version:
Application: 1.0.006
Bootloader: 1.4.001
HMOS: 1.6.002
** Related Hardware
1434158F, 1434177A
** Bugfix
* If the parameter "ENABLE_ROUTING" is set, the device send not acknowledge package
to anyrouter.
* After change the parameter for the utc-offset, the device send a time request to
the access point.
** Modification
* Change to Version 1.0.006
Version 1.0.005 - 20150409
----------------------------------------------------------------------------------------
** Related Hardware
* 1434158F, 1434177A
** Bugfix
** Modification
* Change to Version 1.0.005
Version 1.0.004 - 20150409
----------------------------------------------------------------------------------------
** Related Hardware
* 1434158F, 1434177A
** Bugfix
* At DEC with temperature change the device furthermore pay attention for window open
state.
* Correction the evaluation of the filter parameters CYCLIC_INFO_MSG_DIS and
CYCLIC_INFO_MSG_DIS_UNCHANGED.
* If a week program switch point is between 2:00 and 3:00 o'clock the device change
setpoint temperature after change from winter to summer time.
* Current consumption due to the status info message to the HAP with BiDi-Bit was too
high.
* After answer from HAP leave full rx mode.
* Change values for status change check.
* Boost Mode is also possible in Auto-Mode.
* The setpoint temperature in Auto-Mode and in Party-Mode can only be in the range of
5.0° <= setpoint <= 30.0°.
* Parameter "ENABLE ROUTING" is evaluated.
** Modification
* Change to Version 1.0.004
Version 1.0.003 - 20150320
----------------------------------------------------------------------------------------
** Related Hardware
* 1434158F, 1434177A
** Bugfix
** Modification
* Change to Version 1.0.003
Version 1.0.002 - 20150320
----------------------------------------------------------------------------------------
** Related Hardware
* 1434158F, 1434177A
** Bugfix
** Modification
* Change to Version 1.0.002
Version 1.0.001 - 20150319
----------------------------------------------------------------------------------------
** Related Hardware
* 1434158F, 1434177A
** Bugfix
** Modification
* Change to Version 1.0.001
Version 1.0.000 - 20150319
----------------------------------------------------------------------------------------
** Related Hardware
* 1434158F, 1434177A
** Bugfix
** Modification
* Change to Version 1.0.000