BSM Firm 1.10.12

[Alex__]

Hi

Seit heute wird mir angezeigt, das für meine BSM Updates bereitstehen. Kann sie vom GeräteFirmware Link in der CCU (Raspi) downloaden. Auf der EQ3 Seite wird unter Downloads noch nichts angezeigt.
Auch ist die Firm Datei nach upload zur CCU nicht im Reiter "Geräte-Firmware" vorhanden, Neustart half nichts.
Kann das wer bestätigen?

[schlichi]

Hallo,

... im Fenster GeräteFirmware mittels Button "NEU" die hochgeladene Datei ausgesucht und eingestellt?

Gruß
schlichi

[NickHM]

Guten morgen

ich bekomme die FW angeboten und kann sie auch runter laden. Das Archiv sieht i.O. aus.

Da ich aber keine Probleme mit meinen BSM habe, werde ich die FW nicht in die CCU2 hoch laden.
Auf Ab / Anlernen habe ich keine Lust.

Code: Alles auswählen

Achtung! 
Bitte verwenden Sie die Firmware-Datei nur in Verbindung mit der CCU2 ab Version 2.29.18.

Please note: 
Only use the firmware file in connection with the CCU2 from version 2.29.18.

Changelog:

Version 1 (2 for pluggable).10.12 - 20180226
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * [HmIP-BSM] Added reset of measurement array after switching 
     to prevent next measurement to be outdated. An outdated 
     array may cause wrong switching! [HMIP_BSM-56]
	 
** Improvement
   * 
   
** Comments 
   * 
	 
	 
Version 1 (2 for pluggable).10.10 - 20180220
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed wrong reset of a pending flag if disable_msg_to_ac was set.
   * Added sending of unknown RSSI value in two cases.
   * Corrected switching direction if switching with current 
     detection is disabled. [HMIP_BSM-54]
   * Corrected timeout for sequence counter (from 10 to 2 minutes).
	 
** Improvement
   * Corrected some comments.
   
** Comments 
   * Changed default value for POWERUP_ONTIME from 0x00 to 0xFF.
     [CHANGEMANAGEMENT-555][HMIP_BSM-55][HMIP_FSM-23][HMIP_FSM16-17]
     [YOU_SWA_POM_PAI-55][YOU_SWA_PAI-39] 
   * Added new operation mode (minimum HMOS 1.24.0 necessary)
   * Changed counting of event_counter to new mechanism
     (boot:0; other:[1..252]). [CHANGEMANAGEMENT-483]
   * Changed checking of event_counter to new mechanism.
     [CHANGEMANAGEMENT-483][HMIP_BSM-52][HMIP_FSM-21]
     [HMIP_FSM16-15][YOU_SWA_POM_PAI-52][YOU_SWA_PAI-37]
   
   
Version 1 (2 for pluggable).10.8 - 20171222
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed bug with fast switching [HMIP_BSM-51]
	 
** Improvement
   *
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).10.6 - 20171106
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed a bug with sending statusframes with ACK and ARR bit [HMIP_BSM-50]
	 
** Improvement
   *
   
** Comments 
   * 


Version 1 (2 for pluggable).10.4 - 20171020
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Fixed a bug with sending statusframes at actuartors
     with powermeter function. [HMIP_BSM-48]
	 
** Improvement
   *
   
** Comments 
   * 
   
   
Version 1 (2 for pluggable).10.2 - 20171009
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   *
	 
** Improvement
   *
   
** Comments 
   * Increased version of HMOS to 1.20.4.
   
   
Version 1 (2 for pluggable).10.0 - 20171006
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   *
	 
** Improvement
   *
   
** Comments 
   * Created Tag 1(2 for pluggable).10.0


Version 1 (2 for pluggable).9.2 - 20171006
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix
   * Corrected behaviour of weekprogrammm for neagtive coordiantes.
     [HMIP_BSM-43][HMIP_FSM-14][HMIP_FSM16-10]
	 [YOU_SWA_PAI-32][YOU_SWA_POM_PAI-46]
   * Changed behaviour of init routines in powermeter- and switch-task.
     [HMIP_BSM-40]
   * [GRASS] Fixed behaviour of sending statusmessages 
     for multichannel devices. 
	 
** Improvement
   
** Comments 
   
   
Version 1 (2 for pluggable).9.1 - 20170908
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B
   * 1854630A

** Bugfix

** Improvement
   * new parameter for suppressing messages to Access Controller
   
** Comments 
   * First release version for HmIP-PCBS2


Version 1 (2 for pluggable).8.12 - 20170719
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
   * 1754501B

** Bugfix
   * Statusmessage handling corrected

** Improvement
   * Statusmessage handling optimized for multichannel devices
   * No reboot after aborded factory reset
   * new telegrams are only send if previous telegram is acked or timed out
   
** Comments 
   * First release version for HmIP-MOD-OC8
   * Use of bootloader 1.10.0
   
   
Version 1 (2 for pluggable).7.6 - 20170530
--------------------------------------------------------------
 
** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
 
** Bugfix
   * [HMIP_PCBS_BAT-14] ARR timeout is not observed 
      with the Info and TimeInformation frames
   * [HMIP_PCBS_BAT-15] LowBat Bit is not set in the status Info
      
** Improvement
   * [HMIP_PCBS_BAT-16] DataType Operating Voltage send with StatusInfo
   
** Comments 
   * 
    
    
Version 1 (2 for pluggable).7.5 - 20170519
--------------------------------------------------------------
 
** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 
 
** Bugfix
   * [HMIP_PCBS_BAT-12] The device reacts with the same 
     event counter for an unconditional switch command.
   * [HMIP_PCBS_BAT-13] Device is permanently awake.
   
** Comments 
   * 

   
Version 1 (2 for pluggable).7.4 - 20170427
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * [HMIP_BSM-33] Fixed a bug with not acting device if the 
     channel key was pressed at a included device.

** Comments 
   *
   
   
Version 1 (2 for pluggable).7.3 - 20170426
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * [HOTFIX] Increased the power to trigger a simulated 
     keypress from 0.1W to 1 W. [HMIP_BSM-32]
   * [HOTFIX] Value for the new powerstatus is saved after 
     being stable for two measurements. [HMIP_BSM-32]
   * Corrected default duration of weekprogramm to 0xFF.
   * Corrected / Optimised sending of a normal ACK/NACK. [CHANGEMANAGEMENT-25]

** Comments 
   *
   
   
Version 1 (2 for pluggable).7.2 - 20170425
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix

** Comments 
   * Removed ramp time from the weekprogram.
   * Added sending of statusframes for the weekprogram.
     (After inclusion, cyclic and on request)
   * Corrected a bug with inhibit channels. [CHANGEMANAGEMENT-51]
	  
	  
Version 1 (2 for pluggable).7.1 - 20170413
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix

** Comments 
   * Added lock feature to weekprogramm channel.
   * Added delayed weekprogram status info to status info
      receiver after change of lock channels.
   
   
Version 1 (2 for pluggable).7.0 - 20170405
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * Increased the pulse for switching the relais 
     from 30 ms to 75 ms.

** Comments 
   * Increased version due to creation of a tag.


Version 1 (2 for pluggable).5.9 - 20170405
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * 

** Comments 
   * Added new weekprogramm.
   
   
Version 1 (2 for pluggable).5.8 - 20170328
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * In auto inclusion mode, the triple burst listener device is not a permanent listener.

** Comments 
   * 
   
   
Version 1 (2 for pluggable).5.7 - 20170308
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B 

** Bugfix
   * Fixed a bug with the sequence counter in the unicast frame 
     (for collecting ACKs) after sending multicast frames due 
	 to a long keypress.

** Comments 
   * 
   
   
Version 1 (2 for pluggable).5.0 - 20161209
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F
   * 1764508B

** Bugfix
   * 

** Comments 
   * Increased version number due to creation of a tag.
   
   
Version 1 (2 for pluggable).3.8 - 20161128
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * [GRASS] Corrected a bug with RSSI calculation in statusInfo.

** Comments 
   * 
   
   
Version 1 (2 for pluggable).3.7 - 20161114
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * [GRASS] Fixed a bug that caused errors with one partner linked 
     to more channels.

** Comments 
   * 
   
   
Version 1 (2 for pluggable).3.6 - 20161104
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Fixed a bug with sending unrequested ACKs.

** Comments 
   * 
   
   
Version 1 (2 for pluggable).3.5 - 20161021
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * Added switching the relay as EMC action.
   
   
Version 1 (2 for pluggable).3.4 - 20160926
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Fixed a bug with the simulated keypress generated from 
     the powermeter task.

** Comments 
   *


Version 1 (2 for pluggable).3.3 - 20160913
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Added IDLE state to switch task.
   * Corrected behaviour of the powerfailure function.
   * Corrected behaviour of the overhead function.
   * Suppressed sending of StatusInfoFrames if the device is 
     not included.
   * Corrected behaviour of factory reset if the keyVisual is 
     pressed during powerUp.

** Comments 
   *
   
   
Version 1 (2 for pluggable).3.2 - 20160901
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Included hmos 1.16.2 which fixed a bug with exlusion after inclusion

** Comments 
   *
   

Version 1 (2 for pluggable).3.1 - 20160721
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Corrected size of action type.
   * Fixed a bug that caused not spawning conditional switch 
     channel task.
   * Fixed setting of the decision value for falling direction 
     in the conditional switch channel.

** Comments 
   *
   
   
Version 1 (2 for pluggable).3.0 - 20160719
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * Increased version number due to creation of a tag.
   
   
Version 1 (2 for pluggable).1.17 - 20160718
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * StutusInfo frames from the switch module can now be send 
     with ARR-Bit. 
     StatusInfo frames from the powermeter are still 
     unidirectional all the time.

** Comments 
   * 
	 
	 
Version 1 (2 for pluggable).1.16 - 20160714
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * Removed sending of config update requests on buttonpress 
     of the keyvisual for all permanent powered actuators.
   
   
Version 1 (2 for pluggable).1.15 - 20160708
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * [HmIP-PSM]Fixed bug that first reset step is ready before 
     the timeout of 4 seconds occur.
   * Suppress boot blinking if reset is in progress.
   * Fixed a bug with index of parameter arrays if the key 
     visual is used as channel key. 

** Comments 
   * 
	 
	 
Version 1 (2 for pluggable).1.14 - 20160704
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Conditional switch channel gets now removed in idle state.

** Comments 
   * Set the default values for event delay of output1, 
     meter and conditional channel from 1 to 3 seconds.
   * Powermeter arrays for averaging now always get resetted 
     if SWITCH_set_level_real() is called.
	 
	 
Version 1 (2 for pluggable).1.13 - 20160616
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * [HmIP-PSM]Fixed a bug in evaluation of long keypresses 
     for the pairing mode.
   * [HmIP-PSM] Fixed a bug with setting parameters for the 
     input channel.

** Comments 
   * [HmIP-PSM] Set default value for the longpress time in the 
     HmIP-PSx devices to 4s.
   
   
Version 1 (2 for pluggable).1.12 - 20160613
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Corrected some typos.

** Comments 
   * Added conditional switch channel.
	 
	 
Version 1 (2 for pluggable).1.11 - 20160531
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Reset ACCEPT_ANY_DEVICE to 0.

** Comments 
   * [HmIP-PSM] Major version increased to 2.
     Minor and Path number will run parallel for all devices.
	 
	 
Version 1.1.10 - 20160518
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * [HmIP-PS] Added routines for HmIP-PS.
   * Renamed CS5490_zc.c /.h to zerocrossing_interrupt.c / .h 
     to be more general.
   * Smaller changes to the DUMMY_SGTIN.
   * Reduced number of partners for HmIP-PSx to 20. 
     With this all switch actuators act the same.
	 
	 
Version 1.1.9 - 20160512
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * [HmIP-FSM16] Corrected a bug with the switching direction.

** Comments 
   * Added visualisation of the channelstate with the key 
     visual (Including the parameter) to all actuators. 
   
   
Version 1.1.8 - 20160510
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * [HmIP-PSM] Added pairing functionality.
   
   
Version 1.1.7 - 20160509
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * [HmIP-PSM] Added routing functionality.
   
   
Version 1.1.6 - 20160509
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * Some style changes.
   * Corrected calculation of energycount.

** Comments 
   * Some optimisations on startup.
	 
	 
Version 1.1.5 - 20160503
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * Corrected some comments and function headers.
   * Corrected parameter for energy threshold. It was one byte 
     but has to be two byte.
   * [HmIP-PSM] Added parameter LED_DISABLE in list1 of the 
     real channel.
	 
	 
Version 1.1.4 - 20160502
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * [HmIP-PSM] Added default link between key visual and 
     the switch channel.
   * [HmIP-PSM] Added routines to do visialisation of the 
     channel state with the key visual.
   * [HmIP-PSM] Corrected factory reset gesture 
     (only valid at power up).
   
   
Version 1.1.3 - 20160428
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B
   * 1454104F

** Bugfix
   * 

** Comments 
   * [HmIP-PSM] Added key routines for switching with the key visual.
   
   
Version 1.1.2 - 20160426
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed to which multicast addresses the device listens.

** Comments 
   * Startet porting code to the PSM hardware.
   
   
Version 1.1.1 - 20160425
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed a bug with ACKs to config update request frames.

** Comments 
   *
   
   
Version 1.1.0 - 20160413
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * 

** Comments 
   * Increased version number due to creation of a tag.
   
   
Version 0.5.25 - 20160407
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed another bug with loading and accepting new parameter.

** Comments 
   * 
   
   
Version 0.5.24 - 20160407
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed a bug with eventdelay of the switch channels. 
    (wrong channel "group" was read)
   * Fixed a bug with reading out configuration parameters 
     for the switch channel(s).

** Comments 
   * 
   
   
Version 0.5.23 - 20160405
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Added forgotten initialisation of of reset pin for FSM16.

** Comments 
   * Added / Corrected Power fail detection for bistable relais.
   
   
Version 0.5.22 - 20160401
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Redesign of sending ACKs.
   * Added marker for rx options.

** Comments 
   * 
	 
	 
Version 0.5.21 - 20160331
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed a bug with keypress counter in simulated keypresses.
   * fixed problem that the internal ACK frame is send to the 
     address of the link partner, which has received while 
	 waiting for tx callback.
   * fixed problem hat the rx is not restarted while waiting 
     for tx callback
   * Fixed a bug with sequence counter handling for statusinfo.

** Comments 
   * Exchanged KEY_1 and KEY_2 to uniform channel layout of 
     HmIP priducts. 
     Now Channel 2 is the upper button but upper butten holds 
	 its old function.
   
   
Version 0.5.20 - 20160330
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed a bug with checking the sender address 
     (Mistake in version 0.5.17 checked not on receiving 
	  switch commands but in direct execution case)

** Comments 
   * 
   
   
Version 0.5.19 - 20160329
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * 

** Comments 
   * Added answering of time information frames.
	 
	 
Version 0.5.18 - 20160329
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * 

** Comments 
   * Changed behaviour of longkeypress in the internal link 
     from toggle to the same behaviour as the short one.
   
   
Version 0.5.17 - 20160324
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed handling of seq-counter of different sender.
   * Fixed executing of internal send commands.

** Comments 
   * Corrected some typos, comments and style.
   * Removed unnecessary saving of sequence counter.
   * Reverted change of powerUp-jumptarget enumeration.
   
   
Version 0.5.16 - 20160322
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed setting and sending of binary state from the real channel.
   * Fixed powerup behaviour. 
     NOTE: PowerUp action is triggert 2s after boot due 
	 to settle time of the measurement IC!
   * Fixed some typos and style.

** Comments 
   * 
   
Version 0.5.15 - 20160304
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed a bug with receiving new configuration for the
     powermeter channel.

** Comments 
   * 
   
   
Version 0.5.14 - 20160303
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed a bug with numbering of parameters for powermeter 
     channel.

** Comments 
   * 
   
   
Version 0.5.13 - 20160301
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Smaller cleanup and correction of typos.

** Comments 
   * Added channel information to the statusinfo frame.
   * Actualisations of information in the LevelInfo frame
   
   
Version 0.5.12 - 20160224
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Fixed two small logic bugs in application.c.
   * Fixed a bug with sending long keypresses.

** Comments 
   * Added support for bistable relays.
   
   
Version 0.5.11 - 20160218
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * Corrected a bug with long keypress.

** Comments 
   * Corrected number of possible partners for the powermeter channel.
   * Removed the small delay that was inserted in version 0.5.10.
	 
	 
Version 0.5.10 - 20160210
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305B
   * 1554267B

** Bugfix
   * 

** Comments 
   * Added a small delay between receiving a "force statusinfo" 
     telegramm trom testrunner and sending it because testrunner 
	 has a bug and/or is to slow to send the command and start 
	 the receive step.
   
   
Version 0.5.9 - 20160205
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * 

** Comments 
   * Added "force statusinfo" to the testmode.
   * Added saving of calibration gain values.
   
   
   
Version 0.5.8 - 20160203
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * Corrected teh handling of channel numbers with direct 
     executions.
   * Corrected some size conflicts NUMBER_OF_ACT_CHANNELS and 
     NUMBER_OF_SWITCH_CHANNELS in combination with virtual 
	 channels.
   * Fixed a bug in the order of calibration steps.

** Comments 
   * 
   
   
Version 0.5.7 - 20151218
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * 

** Comments 
   * Moved handling of Request Time Service frame from testmode 
     to application receive callback.
   * Added handling of timeinfo request frames.
   
   
Version 0.5.6 - 20151217
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * Added MAX_PARTNERS_CHANNEL_POWERMETER to the maximal 
     number of partner.
   * Fixed some minor bugs in getter functions for the 
     device flags of LIST0

** Comments 
   * Implemented requesting and receiving time information.
   * Implemented sending of own time information.
   * Implemented handling of new LIST0 parameters.
   * Implemented handling of new LIST12 parameters.
	 
	 
Version 0.5.5 - 20151210
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * 

** Comments 
   * Added files an functions for the weekprogramm 
     (first time compiling, not ready implemented).
   
   
Version 0.5.4 - 20151127
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * 

** Comments 
   * Implemented virtual Channels also to PowerUpAction.
   
   
Version 0.5.3 - 20151126
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * Corrected size of persist data in the linker options.
   * Corrected some comments.

** Comments 
   * Implemented virtual channels.
   
   
Version 0.5.2 - 20151120
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   *

** Comments 
   * Corrected handling of sequence counter.
   
   
Version 0.5.1 - 20151113
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   *

** Comments 
   * Corrected some default values for the parameter.
   
   
Version 0.5.0 - 20151111
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * 

** Comments 
   * Increased the version number due to creation of a tag.
   * Added sending of NAK_INVALID_CHANNEL.
   
   
Version 0.3.14 - 20151109
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * Fixed a small bug in the powerUp action.
   * Corrected type of second parameter ("permanent") of 
     PROFILE_timercalc-function (uint8_t -> bool_t).

** Comments 
   * Resorted the order of writing the CS5490 registers on calibration.
	 
	 
Version 0.3.13 - 20151105
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A
   * 1554267B

** Bugfix
   * Added m_useTmp to the switch module to be able to do 
     correct configuration.
   * Corrected a bug in the factory reset routines 
     regarding the key number.

** Comments 
   * Added parameter CURRENTDETECTION_BEHAVIOR.
   * Added case SERVICE_ID_FORCE_STATUSTEL in preparation 
     for the calibration by the testtool.
   * Added calibration routines.
   * Removed obsolete application_dummy files.
   * Removed some obsolete pin definitions because these 
     were unified across BSM and FSM.
   
   
Version 0.3.12 - 20151028
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Added routines to save and read out the release delay time.
   
   
Version 0.3.11 - 20151028
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Added routines for measuring the delay times of the relay.
   * Added routines to save and read out the operate delay time.
   
   
Version 0.3.10 - 20151023
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Added testroutines for LEDs and KEYs.
	 
	 
Version 0.3.9 - 20151023
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Fixed a bug with sending error frames.
   * Removed division by two at the calculation of the switching 
     times because the worst possible switch time of the relais 
	 is longer as half a period and would cause negative switching 
	 times.

** Comments 
   * Removed unnecessary parameter for zc-delay.
   * Removed some warnings.
   * Small change with sending NACKs.
   * Added a trigger for sending an ACK after direct executon 
     frame with FRAMES_SNC_ACTION_CODE_RAMP_START was received.
   * Instead of three groups of one-dimensional arrays for power-up action 
     now one groups of two-dimensional arrays is used.
   
   
Version 0.3.8 - 20151019
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Fixed a bug in the key routines regarding inclusion 
     requests and simultan switch commands.
   * Corrected location of GDO2 (transceiver IO) 
     in the hardware config.

** Comments 
   * Added Task for internal temperatur measurement.
   * Added sending of error frames.
   * Moved or deleted some functions from application_dummy.c
   * Corrected default relay delays for better accuracy.
   * Did some code clean-up and corrections of comments.
	 
	 
Version 0.3.7 - 20151009
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Added initial configuration of the relay pin in the 
     switch module.

** Comments 
   * Added zero-crossing-switching 
     (functionality without HMOS -> directly with the emlib).
   * Changed the return values of APPLICATION_KEY_key_evaluation 
     to a bitarray to be able to handle a switch command of 
	 a not included device and sending out inclusion requests.
   
   
Version 0.3.6 - 20150930
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Small change if the reset procedure gets aborted with a 
     short keypress.

** Comments 
   * Implemented report link partner problem.
	 
	 
Version 0.3.5 - 20150929
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Switched read out of FUP and DRDY flags to be able to 
     read the frequency with faster data interval.
   * Corrected ome wrong coments.

** Comments 
   * Changed the reset procedure to fit for mains powered devices.
     -> added Error state and removed state for inital keypress.
	 
	 
Version 0.3.4 - 20150928
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Added sending of StatusInfo frames after entering 
     a new profile section.
   * Now the powermeter and the switch module can cancel a 
     pending statusinfo from the other module if the own 
	 (delay) timeout is reached.
	 
	 
Version 0.3.3 - 20150924
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Added sending of a StatusInfo telegramm after inclusion.

** Comments 
   * Added sending of StatusInfo frames in the powermeter task.
   * Added sending of Powermeter-values in the statusinfo.
   * Added LevelInfo as ACK (Just a dummy, channel is still wrong).
   * Did some optimisations with sending frames in the 
     application module.
   * Commented sending of ACKs in the switch module 
     (this seems to be done in the profile module already).
   * Commented sending of StatusInfos in the switch module 
     (this seems to be done in the profile module already).
	 
	 
Version 0.3.2 - 20150915
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Changed sample number from 500 to 400.
   * Corrected the device type.

** Comments 
   * Now the value of m_pavg (the last measured power value) is 
     taken to sense the network status. This can be done because 
	 the value does not to be very accurate (average).
	 
	 
Version 0.3.1 - 20150911
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Changed the function header of SWITCH_get_state

** Comments 
   * Implemented functionality that the powermeter channel 
     simulates a keypress on button one or two to trigger the 
	 profile if someone presses another switch in the bridge 
	 network.
   * Implemented features to just switch the relay on if 
     the chennel is off and vise versa.
   * Implemented further init step of the CS5490 to change 
     the sample count (not the sample rate!).
   
   
Version 0.3.0 - 20150904
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Removed some parts to added some HmIP-FSM functionality.
	 
	 
Version 0.1.10 - 20150903
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Did some code cleanup and commentation.
   * Added powerstatus mechanism that changes DO of CS5490 
     and stores the value to a module variable.
   
   
Version 0.1.9 - 20150706
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Added files for powermeter functionality.
   
	 
Version 0.1.8 - 20150702
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Added delays to the tasks if they try to call the 
     parameter module and get a BUSY.
   
   
Version 0.1.7 - 20150630
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Correted some behavior with sending and receiving ACKs.
   * Corrected default behaviour of long keypress.

** Comments 
   * 
   

Version 0.1.6 - 20150626
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Simplified parameter lists.

** Comments 
   * Removed some of my own warnings.
   * Removed triggering of "NACK peer unknown" because this 
     is handled in the STACK / HMOS.
   * Further process in multi channel functionality.
   * Added functionality to send NACKs and statusinfo frames 
     with set ACK bit.
   
   
Version 0.1.5 - 20150624
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * Fixed some parameter issues.

** Comments 
   * 
   
   
Version 0.1.4 - 20150623
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Added switch module.
   * First steps of multi channel functionality added.
   
   
Version 0.1.3 - 20150618
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A
   * 1564305A

** Bugfix
   * 

** Comments 
   * Further implementing of the profile task.
   * Made some changes to the creation of the internal link.
   * Added dummy-functionality as output.
	 
	 
Version 0.1.2 - 20150617
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A

** Bugfix
   * 

** Comments 
   * Implemented creation of internal link.
   * Added profile task. (not tested yet!)
   * Added application_dummy for missiong (SWITCH-) functions 
     to make the profile task compile. 
   
   
   
Version 0.1.1 - 20150615
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A

** Bugfix
   * 

** Comments 
   * Changes in the LED callbacks due to changes in HMOS.
   * Renaming of the functions in the application key module.
   
   
Version 0.1.0 - 20150611
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A

** Bugfix
   * Corrected DEVICE_INFO_OPERATION_MODES.

** Comments 
   * Added Button-task.
   * Added creating and handling of config request frames.
   * Added creating and sending of unconditional switch command
     frames.
   * Added define for relay port / pin.


Version 0.0.1 - 20150605
--------------------------------------------------------------

** Related Hardware
   * 1424102A + 1434181A

** Bugfix
   * 

** Comments 
   * Initial commit with template as new start of the project.
	 

[Alex__]

Guten morgen

ich bekomme die FW angeboten und kann sie auch runter laden. Das Archiv sieht i.O. aus.

Da ich aber keine Probleme mit meinen BSM habe, werde ich die FW nicht in die CCU2 hoch laden.
Auf Ab / Anlernen habe ich keine Lust.

Elegant

Es geht auch darum das die Firm nach dem Upload auf die CCU2(Raspi) nicht angezeigt wird, wie oben beschrieben Raspimatic mit Aktueller Firm.
Heist also, ich kann den Updatevorgang gar nicht erst anstoßen

Kann das auch wer bestätigen?

[NickHM]

Heist also, ich kann den Updatevorgang gar nicht erst anstoßen

Kann das auch wer bestätigen?

Du hast mich nicht ganz verstanden. Ich würde Dir ja gern helfen, aber wenn ich die FW auf die Zentrale lade, beginnt die Übertragung sofort in den Aktor, ohne das ich das verhindern kann. Lediglich nach erfolgter Übertragung kann ich dann entscheiden, ob ich den Update Button drücke, der dann erscheint. Ich möchte aber nicht meinen DC erhöhen und die Reaktionszeit der BSM verlangsamen, nur weil ich eine FW übertrage, die ich nicht brauche.
Also sorry, aber das Risiko gehe ich nicht ein, auch wenn ich Dir gern helfen würde.

[Alex__]

Du hast mich nicht ganz verstanden. Ich würde Dir ja gern helfen, aber wenn ich die FW auf die Zentrale lade, beginnt die Übertragung sofort in den Aktor, ohne das ich das verhindern kann. Lediglich nach erfolgter Übertragung kann ich dann entscheiden, ob ich den Update Button drücke, der dann erscheint. Ich möchte aber nicht meinen DC erhöhen und die Reaktionszeit der BSM verlangsamen, nur weil ich eine FW übertrage, die ich nicht brauche.
Also sorry, aber das Risiko gehe ich nicht ein, auch wenn ich Dir gern helfen würde.[/quote]

Jo Danke, war jetzt nicht beabsichtigt das es den Anschein macht das ich von Dir möchte das du es ausprobierst, hast mich auch falsch verstanden sry, Hab mit deinen Zitat eigentlich nur zur Kenntnis genommen das du auch die Updates vorgeschlagen bekommst.

Hab lediglich neu in die Runde gefragt, an die wenigen die vielleicht auch updaten wollen, ob die Datei nach dem Hochladen sichtbar ist.

[Familienvater]

Hi,

mit welchem Browser hast Du die Datei runtergeladen, und wie heißt das FIrmware-Archiv, was du versuchst Hochzuladen? Evtl. hat mal wieder ein autonom agierender Browser das Ding nach dem Runterladen entpackt?

Der Familienvater

[Alex__]

Safari, kein Auto Entpacken.
Datei: HmIP-BSM_update_V1_10_12_180226.tar
Komisch, hab soeben versucht andere Firm Dateien hochzuladen, auch welche von denen ich kein Gerät im Einsatz hab, keines ist sichtbar, sollten aber.
Vielleicht ein Bug in der jetzigen Firm des Raspimatic.



Oder
it's not a bug, it's a feature, unsichtbare Updates

Mal sehn

[Familienvater]

Hi,

ich weiß jetzt nicht, wie es konkret bei dieser Firmware ist, aber wenn man die 1.6.2 für den BSM bei EQ-3 runterlädt, dann ist das eine .tgz

Der Familienvater

[Alex__]

So, hatte eine Entpack Software vor 2 Wochen getestet und bis dato nicht wieder gelöscht. Hatte nicht mehr dran gedacht, und anscheinend hat dieser echt die .tar erzeugt. Und Ich dachte mir noch das die Firm Dateien doch anders heißen.
Alles klar, läuft jetzt, danke