[GELÖST] Hänger bei "Starting LGWFirmwareupdate..."

[schneidy76]

Meine Vermutung ist daher, dass bei dem fehlgeschlagenen Update die Datei geschrieben worden ist. Mit korrupten Daten eben. Du hast nicht zufällig ein Linux System? Über Virtual PC oder ähnlich? Dann könntest Du mal auf die Karte schauen...

[marc]

Meine Vermutung ist daher, dass bei dem fehlgeschlagenen Update die Datei geschrieben worden ist. Mit korrupten Daten eben. Du hast nicht zufällig ein Linux System? Über Virtual PC oder ähnlich? Dann könntest Du mal auf die Karte schauen...

Leider nicht zur Hand - an der Arbeit hätte ich was, habe aber seit heute Urlaub. Müsste das dann /usr/local/HMLGW sein?

Gruß

[Gluehwurm]

Übersteigt leider meine Fähigkeiten, pardon.

In irgendeinem anderen Thread habe ich das heute schon gelesen

Ist aber die gleiche Person
viewtopic.php?f=65&t=36725&p=356758#p356758

[marc]

Übersteigt leider meine Fähigkeiten, pardon.

In irgendeinem anderen Thread habe ich das heute schon gelesen

Ist aber die gleiche Person
viewtopic.php?f=65&t=36725&p=356758#p356758

Ja, sorry. Das drohte dort etwas unterzugehen

[schneidy76]

Ja diese Datei meine ich. Soweit ich Jens seine Anleitung verstanden habe ist das die Datei dies den LanGW Modus auslöst.

[JRiemann]

Ach sooo... Du hast RaspiMatic als Fake-LAN-Gateway eingerichtet...
Dann muss die Gateway-Datei aus dem Dateisystem gelöscht werden.
Hast Du im RaspiMatic den SSH-Zugang aktiviert und ein Passwort vergeben?

Wenn ja, dann musst Du Dich z.B. mit WinSCP auf dem Raspi einloggen.
Im Dateisystem muss dann im Ordner /usr/local/ die Datei mit dem Namen "HMLGW" gelöscht werden. Anschl. gibst Du in der Console den Befehl "reboot" ein.
Nach dem Neustart sollte RaspiMatic wieder ganz normal als "CCU" starten.

[marc]

Ach sooo... Du hast RaspiMatic als Fake-LAN-Gateway eingerichtet...

Nein, eben nicht. Ich habe gerade per WinSCP draufgeschaut - die Datei HMLGW ist in usr/local/ nicht vorhanden

[marc]

Hier der Inhalt von /var/log/messages

Code: Alles auswählen

Jan  1 00:00:10 homematic-raspi syslog.info syslogd started: BusyBox v1.24.2
Jan  1 00:00:10 homematic-raspi user.notice kernel: klogd started: BusyBox v1.24.2 (2016-12-21 10:27:11 CET)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Booting Linux on physical CPU 0xf00
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Initializing cgroup subsys cpuset
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Initializing cgroup subsys cpu
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Initializing cgroup subsys cpuacct
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000] Linux version 4.4.36-v7 (damato@bilbo) (gcc version 4.9.3 (Buildroot 2016.05-00221-g99366fc) ) #1 SMP PREEMPT Wed Dec 21 10:46:46 CET 2016
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] cma: Reserved 8 MiB at 0x38400000
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    0.000000] On node 0 totalpages: 232448
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 808cd240, node_mem_map b7bf7000
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    0.000000]   Normal zone: 2043 pages used for memmap
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    0.000000]   Normal zone: 232448 pages, LIFO batch:31
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.000000] [bcm2709_smp_init_cpus] enter (9560->f3003010)
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.000000] [bcm2709_smp_init_cpus] ncores=4
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] PERCPU: Embedded 13 pages/cpu @b7bb3000 s22848 r8192 d22208 u53248
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    0.000000] pcpu-alloc: s22848 r8192 d22208 u53248 alloc=13*4096
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 230405
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa01041 bcm2709.serial=0xda272d7a smsc95xx.macaddr=B8:27:EB:27:2D:7A bcm2708_fb.fbswap=1 bcm2709.uart_cl
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Memory: 902492K/929792K available (6409K kernel code, 433K rwdata, 1720K rodata, 452K init, 764K bss, 19108K reserved, 8192K cma-reserved)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000] Virtual kernel memory layout:
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]     vmalloc : 0xb9000000 - 0xff800000   (1128 MB)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]     lowmem  : 0x80000000 - 0xb8c00000   ( 908 MB)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]       .text : 0x80008000 - 0x807f882c   (8131 kB)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]       .init : 0x807f9000 - 0x8086a000   ( 452 kB)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]       .data : 0x8086a000 - 0x808d6564   ( 434 kB)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.000000]        .bss : 0x808d9000 - 0x8099824c   ( 765 kB)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] 	Build-time adjustment of leaf fanout to 32.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] NR_IRQS:16 nr_irqs:16 16
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000036] Switching to timer-based delay loop, resolution 52ns
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000355] Console: colour dummy device 80x30
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000605] console [tty2] enabled
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000640] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.000670] pid_max: default: 32768 minimum: 301
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.001096] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.001120] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.002455] Disabling cpuset control group subsystem
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.002506] Initializing cgroup subsys io
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.002545] Initializing cgroup subsys memory
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.002610] Initializing cgroup subsys devices
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.002641] Initializing cgroup subsys freezer
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.002672] Initializing cgroup subsys net_cls
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.002756] CPU: Testing write buffer coherency: ok
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.002849] ftrace: allocating 21253 entries in 63 pages
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.054924] CPU0: update cpu_capacity 1024
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.054968] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.054987] [bcm2709_smp_prepare_cpus] enter
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.055129] Setting up static identity map for 0x8240 - 0x8274
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.134451] [bcm2709_boot_secondary] cpu:1 started (0) 16
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.134876] [bcm2709_secondary_init] enter cpu:1
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.134937] CPU1: update cpu_capacity 1024
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.134946] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.164514] [bcm2709_boot_secondary] cpu:2 started (0) 18
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.164870] [bcm2709_secondary_init] enter cpu:2
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.164903] CPU2: update cpu_capacity 1024
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.164913] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.194602] [bcm2709_boot_secondary] cpu:3 started (0) 18
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    0.194854] [bcm2709_secondary_init] enter cpu:3
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.194885] CPU3: update cpu_capacity 1024
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.194895] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.194990] Brought up 4 CPUs
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.195023] SMP: Total of 4 processors activated (153.60 BogoMIPS).
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.195036] CPU: All CPU(s) started in HYP mode.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.195047] CPU: Virtualization extensions available.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.196057] devtmpfs: initialized
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.213321] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.213837] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.214959] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.215850] NET: Registered protocol family 16
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.221715] DMA: preallocated 4096 KiB pool for atomic coherent allocations
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.232466] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.232489] hw-breakpoint: maximum watchpoint size is 8 bytes.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.232917] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.319026] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.319919] SCSI subsystem initialized
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.320205] usbcore: registered new interface driver usbfs
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.320338] usbcore: registered new interface driver hub
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.320518] usbcore: registered new device driver usb
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.325062] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-05-06 13:53
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.352887] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.417977] FS-Cache: Loaded
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.418408] CacheFiles: Loaded
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.438527] NET: Registered protocol family 2
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.439942] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.440087] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.440282] TCP: Hash tables configured (established 8192 bind 8192)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.440414] UDP hash table entries: 512 (order: 2, 16384 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.440482] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.440873] NET: Registered protocol family 1
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.441461] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.441482] RPC: Registered udp transport module.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.441495] RPC: Registered tcp transport module.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.441508] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.443043] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.445026] futex hash table entries: 1024 (order: 4, 65536 bytes)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.463719] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.464164] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.467435] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.468847] NFS: Registering the id_resolver key type
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.468919] Key type id_resolver registered
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    0.468934] Key type id_legacy registered
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.472581] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.472808] io scheduler noop registered
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.472840] io scheduler deadline registered (default)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.473001] io scheduler cfq registered
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.476579] BCM2708FB: allocated DMA memory f8800000
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.476630] BCM2708FB: allocated DMA channel 0 @ f3007000
Jan  1 00:00:10 homematic-raspi user.info kernel: [    0.539141] Console: switching to colour frame buffer device 240x67
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.516683] bcm2835-rng 3f104000.rng: hwrng registered
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.516864] vc-cma: Videocore CMA driver
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.516880] vc-cma: vc_cma_base      = 0x00000000
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.516895] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.516908] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.517304] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.542717] brd: module loaded
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.556574] loop: module loaded
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.557942] vchiq: vchiq_init_state: slot_zero = 0xb8880000, is_master = 0
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.560042] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.561117] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.561201] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.761683] Core Release: 2.80a
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.761708] Setting default values for core params
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.761762] Finished setting default values for core params
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962280] Using Buffer DMA mode
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962300] Periodic Transfer Interrupt Enhancement - disabled
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962314] Multiprocessor Interrupt Enhancement - disabled
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962328] OTG VER PARAM: 0, OTG VER FLAG: 0
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962350] Dedicated Tx FIFOs mode
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962937] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb8814000 dma = 0xf8814000 len=9024
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962985] FIQ FSM acceleration enabled for :
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962985] Non-periodic Split Transactions
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962985] Periodic Split Transactions
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962985] High-Speed Isochronous Endpoints
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.962985] Interrupt/Control Split Transaction hack enabled
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    1.963018] dwc_otg: Microframe scheduler enabled
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.963104] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8044f9f0
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.963127] WARN::hcd_init_fiq:414: FIQ ASM at 0x8044fd60 length 36
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.963149] WARN::hcd_init_fiq:439: MPHI regs_base at 0xb907e000
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.963253] dwc_otg 3f980000.usb: DWC OTG Controller
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.963311] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.963376] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.963435] Init: Port Power? op_state=1
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    1.963447] Init: Power Port (0)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.963852] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.963877] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.963896] usb usb1: Product: DWC OTG Controller
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.963914] usb usb1: Manufacturer: Linux 4.4.36-v7 dwc_otg_hcd
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.963931] usb usb1: SerialNumber: 3f980000.usb
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.965212] hub 1-0:1.0: USB hub found
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.965307] hub 1-0:1.0: 1 port detected
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    1.966272] dwc_otg: FIQ enabled
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    1.966290] dwc_otg: NAK holdoff enabled
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    1.966303] dwc_otg: FIQ split-transaction FSM enabled
Jan  1 00:00:10 homematic-raspi user.debug kernel: [    1.966348] Module dwc_common_port init
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.966796] usbcore: registered new interface driver usb-storage
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.967302] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.968335] bcm2835-cpufreq: min=600000 max=900000
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.968763] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.968779] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:10 homematic-raspi user.info kernel: [    1.969240] sdhost: log_buf @ b8813000 (f8813000)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.023133] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.043628] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.044524] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.044810] hidraw: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.045110] usbcore: registered new interface driver usbhid
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.045125] usbhid: USB HID core driver
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.045949] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.046332] Initializing XFRM netlink socket
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.046389] NET: Registered protocol family 17
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    2.046600] Key type dns_resolver registered
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    2.047226] Registering SWP/SWPB emulation handler
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.048694] registered taskstats version 1
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.049017] vc-sm: Videocore shared memory driver
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.049042] [vc_sm_connected_init]: start
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.049915] [vc_sm_connected_init]: end - returning 0
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.050490] of_cfs_init
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.050643] of_cfs_init: OK
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.053047] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    2.080288] mmc0: host does not support reading read-only switch, assuming write-enable
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.082352] mmc0: new high speed SDHC card at address b368
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.083430] mmcblk0: mmc0:b368 USD   7.47 GiB
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.085578]  mmcblk0: p1 p2 p3
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    2.163557] Indeed it is in host mode hprt0 = 00021501
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.170524] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.170618] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.173873] devtmpfs: mounted
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.174752] Freeing unused kernel memory: 452K (807f9000 - 8086a000)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.342986] usb 1-1: new high-speed USB device number 2 using dwc_otg
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    2.343264] Indeed it is in host mode hprt0 = 00001101
Jan  1 00:00:10 homematic-raspi user.warn kernel: [    2.399702] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.543303] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.543334] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.544684] hub 1-1:1.0: USB hub found
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.544809] hub 1-1:1.0: 5 ports detected
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.822932] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.923273] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.923297] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.926428] smsc95xx v1.0.4
Jan  1 00:00:10 homematic-raspi user.info kernel: [    2.987265] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:27:2d:7a
Jan  1 00:00:10 homematic-raspi user.info kernel: [    4.699858] EXT4-fs (mmcblk0p3): recovery complete
Jan  1 00:00:10 homematic-raspi user.info kernel: [    5.117737] EXT4-fs (mmcblk0p3): mounted filesystem with journalled data mode. Opts: data=journal
Jan  1 00:00:10 homematic-raspi user.info kernel: [    5.333449] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
Jan  1 00:00:10 homematic-raspi user.info kernel: [    5.347335] i2c /dev entries driver
Jan  1 00:00:10 homematic-raspi user.info kernel: [    5.381981] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
Jan  1 00:00:10 homematic-raspi user.info kernel: [    5.402005] tun: Universal TUN/TAP device driver, 1.6
Jan  1 00:00:10 homematic-raspi user.info kernel: [    5.402035] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 00:00:10 homematic-raspi user.info kernel: [    5.418855] bcm2835_raw_uart: Driver successfully loaded.
Jan  1 00:00:10 homematic-raspi user.notice kernel: [    5.445300] random: dd: uninitialized urandom read (512 bytes read, 68 bits of entropy available)
Jan  1 00:00:10 homematic-raspi user.info kernel: [   10.516507] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Jan  1 00:00:12 homematic-raspi user.info kernel: [   12.128296] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Jan  1 00:00:15 homematic-raspi daemon.info ifplugd(eth0)[248]: ifplugd 0.28 initializing.
Jan  1 00:00:15 homematic-raspi daemon.info ifplugd(eth0)[248]: Using interface eth0/B8:27:EB:27:2D:7A with driver <smsc95xx> (version: 22-Aug-2005)
Jan  1 00:00:15 homematic-raspi daemon.info ifplugd(eth0)[248]: Using detection mode: SIOCETHTOOL
Jan  1 00:00:15 homematic-raspi daemon.info ifplugd(eth0)[248]: Initialization complete, link beat detected.
Jan  1 00:00:15 homematic-raspi daemon.info ifplugd(eth0)[248]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Jan  1 00:00:15 homematic-raspi daemon.warn ifplugd(eth0)[248]: client: ifup: interface eth0 already configured
Jan  1 00:00:16 homematic-raspi daemon.info ifplugd(eth0)[248]: Program executed successfully.
Jan  1 01:00:16 homematic-raspi daemon.notice ntpd[263]: ntpd 4.2.8p7@1.3265-o Wed Dec 21 09:35:26 UTC 2016 (1): Starting
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[263]: Command line: /usr/sbin/ntpd -g 0.de.pool.ntp.org
Jan  1 00:00:16 homematic-raspi user.info kernel: [   16.207962] NET: Registered protocol family 10
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[267]: proto: precision = 1.302 usec (-19)
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[267]: Listen and drop on 0 v6wildcard [::]:123
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[267]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[267]: Listen normally on 2 lo 127.0.0.1:123
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[267]: Listen normally on 3 eth0 192.168.20.70:123
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[267]: Listen normally on 4 lo [::1]:123
Jan  1 01:00:16 homematic-raspi daemon.err ntpd[267]: bind(21) AF_INET6 fe80::ba27:ebff:fe27:2d7a%2#123 flags 0x11 failed: Cannot assign requested address
Jan  1 01:00:16 homematic-raspi daemon.err ntpd[267]: unable to create socket on eth0 (5) for fe80::ba27:ebff:fe27:2d7a%2#123
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[267]: failed to init interface for address fe80::ba27:ebff:fe27:2d7a%2
Jan  1 01:00:16 homematic-raspi daemon.info ntpd[267]: Listening on routing socket on fd #21 for interface updates
Jan  1 00:00:16 homematic-raspi user.err : Could not read serial number
Jan  1 00:00:16 homematic-raspi user.notice kernel: [   16.345502] random: lighttpd: uninitialized urandom read (4096 bytes read, 107 bits of entropy available)
Jan  1 00:00:16 homematic-raspi user.notice kernel: [   16.483107] random: ssh-keygen: uninitialized urandom read (32 bytes read, 109 bits of entropy available)
Jan  1 00:00:16 homematic-raspi user.notice kernel: [   16.544851] random: sshd: uninitialized urandom read (32 bytes read, 109 bits of entropy available)
Jan  1 00:00:16 homematic-raspi auth.info sshd[292]: Server listening on 0.0.0.0 port 22.
Jan  1 00:00:16 homematic-raspi auth.info sshd[292]: Server listening on :: port 22.
Jan  1 01:00:16 homematic-raspi daemon.info cuxd[307]: write_pid /var/run/cuxd.pid [307]
Jan  1 01:00:16 homematic-raspi daemon.info cuxd[307]: CUx-Daemon(1.8a) on CCU(2.25.15.20161220) start PID:307
Jan  1 01:00:16 homematic-raspi user.info homematic: started cux-daemon
Jan  1 01:00:16 homematic-raspi daemon.info cuxd[307]: write_proxy /var/cache/cuxd_proxy.ini (127.0.0.1 8700 307 /usr/local/addons/cuxd/ 1.8a)
Jan  1 01:00:16 homematic-raspi daemon.info cuxd[307]: add interface 'CUxD'
Jan  1 01:00:16 homematic-raspi daemon.info cuxd[307]: write 4 interfaces to /usr/local/etc/config/InterfacesList.xml
Jan  1 00:00:16 homematic-raspi user.info root: Updating RF Lan Gateway Coprocessor Firmware
Jan  1 00:00:16 homematic-raspi user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Jan  1 00:00:16 homematic-raspi user.info update-coprocessor: performGatewayCoproUpdate(): updating KEQ1065417
Jan  1 01:00:17 homematic-raspi daemon.err ntpd[267]: bind(24) AF_INET6 fe80::ba27:ebff:fe27:2d7a%2#123 flags 0x11 failed: Cannot assign requested address
Jan  1 01:00:17 homematic-raspi daemon.err ntpd[267]: unable to create socket on eth0 (6) for fe80::ba27:ebff:fe27:2d7a%2#123
Jan  1 01:00:17 homematic-raspi daemon.info ntpd[267]: failed to init interface for address fe80::ba27:ebff:fe27:2d7a%2
Apr 20 08:25:31 homematic-raspi user.notice kernel: [   17.685317] random: sshd: uninitialized urandom read (32 bytes read, 116 bits of entropy available)
Apr 20 08:25:31 homematic-raspi auth.info sshd[322]: Accepted password for root from 192.168.20.101 port 53708 ssh2
Apr 20 10:25:32 homematic-raspi daemon.info ntpd[267]: Listen normally on 7 eth0 [fe80::ba27:ebff:fe27:2d7a%2]:123
Apr 20 10:25:32 homematic-raspi daemon.debug ntpd[267]: new interface(s) found: waking up resolver
Apr 20 08:25:33 homematic-raspi user.notice kernel: [   20.175328] random: nonblocking pool is initialized

KEQ1065417 ist das LAN-Gateway. Aber er versucht auch das Update aufzuspielen, obwohl das LAN-Gateway gar keinen Strom hat. Kann ich das Ding irgendwie per SSH aus der Konfig entfernen oder den Updateversuch unterbinden?

Gruß

[jmaus]

Ach du hast einen LAN Gateway eingestellt und der ist aber nicht erreichbar. Das ist genau einer der fälle die ich in neueren RaspberryMatic Versionen abfange aber du nutzt ja noch eine alte. Um nun booten zu können musst du entweder den LAN Gateway wieder reaktivieren oder die /etc/init.d/SXXLGWFirmwareUpdate datei umbenennen damit dieser schritt nicht ausgeführt wird.

[marc]

Ok. Der Raspi bleibt aber beim booten auch hängen wenn das LAN-Gateway Strom hat und theoretisch erreichbar wäre.

Wenn ich versuche die Datei umzubenennen bekomme ich einen Fehler wegen des Read-Only-Dateisystems. Bin nicht so der Linux-Mann. Kannst du mir bitte noch sagen wie ich das Dateisystem beschreibbar mache?

Gruß