HmIP-RFUSB vs HM-MOD-RPI-PCB für RaspberryMatic

[tomi_cc16]

Hallo,

wie ist eure Erfahrung zu den beiden Raspi Antennen. Welche von beiden funktioniert besser - gibt es bei dem einem oder anderen irgendwelche Vor- und Nachteile?

Danke

[jmaus]

Der eine braucht USB, der Andere den GPIO. Der Eine kann nur HmIP, der Andere BidCos-RF und HmIP. Besser/Schlechter gibt es da nicht sondern der Eine ist für die Anwendung gut, der Andere eben für eine Andere

[tomi_cc16]

Der Eine kann nur HmIP, der Andere BidCos-RF und HmIP.

Das war die Antwort die ich gesucht habe - war mir nicht zu 100% sicher ob der USB nur HMIP kann (auch wenn es ja so auf der ELV Seite steht).

[darkiop]

Gut zu wissen - hatte mir die USB Variante auch schon in den Notizen abgelegt zum näher betrachten.

Eigentlich schade das die neue nur HM-IP kann ...

[wuscheltuschel]

hat der Text auf der ELV Webseite nicht vermuten lassen der Stick könne doch Homematic BidCos-RF?

Ausschließlich Homematic-IP, dann braucht doch das Ding kein Mensch?

Oder wird das vielleicht noch mit einem Firmware-Update nachgereicht? Würde mich allerdings wundern.

[deimos]

Hi,

der kann kein BidCos und aufgrund der Hardware bin ich sehr sicher, dass der niemals BidCos können wird, weil ein reines HmIP Funkmodul drin ist (TRX2-TIF).

Viele Grüße
Alex

[Homoran]

Wenn man beide Module nutzen könnte, könnte man dem DC ein Schnippchen schlagen.
- IP-Geräte über USB
- non-IP über GPIO
verdoppelt den möglichen DC

Gruß
Rainer

[jmaus]

Unter RaspberryMatic hindert dich keiner daran das HM-MOD-RPI-PCB am GPIO und das HMIP-RFUSB am USB Anschluss zu betreiben und dann nutzt er das HM-MOD-RPI-PCB für reines BidCos-RF und das HMIP-RFUSB für HmIP Kommunikation.

[Eufi]

Guten Morgen,

ich habe einen RaspberryMatic installiert mit dem HmIP-RFUSB. Auch kein Problem, da ich nur über HM IP Geräte verfüge.
Diese sind auch am RaspberryMatic angelernt.
Nun wollte ich den RaspberryMatic mit Openhab über das 2.x Binding verbinden.
Dort bekomme ich allerdings ein Connection refused.
Sollte das grundsätzlich klappen und ich mache was falsch?

Viele Grüße
Eufi

[micha1900]

Unter RaspberryMatic hindert dich keiner daran das HM-MOD-RPI-PCB am GPIO und das HMIP-RFUSB am USB Anschluss zu betreiben und dann nutzt er das HM-MOD-RPI-PCB für reines BidCos-RF und das HMIP-RFUSB für HmIP Kommunikation.

Ich habe den HMIP-RFUSB zusammen mit dem RPI-PCB angeschlossen, allerdings zeigt sich dieser nicht in der Info:

Code: Alles auswählen

CCU Hardware Info
Serial Number:	XXXXXXXXXX
Hardware Model:	Raspberry Pi 3 Model B Rev 1.2 (rpi3)
CPU / Memory:	Cortex-A53 (4), 955.4M
Storage:	29.7G /dev/mmcblk0
Real-Time-Clock:	n/a
CCU Software Info
Product:	raspmatic_rpi3 (3.71.12.20230826)
ReGaHss:	R1.00.0388.0235
Engines:	Tcl (8.6.12), Java (1.8.0_382), NodeJS (v16.20.0)
Status:	SD(0) NTP(1) Link(1) Internet(1) IP(1)
Operating System Info
OS Type/Kernel:	Buildroot 2023.05.1 (Linux 6.1.21 aarch64)
Uptime:	0 d, 1 h 48 min
Load Average:	0.43 0.19 0.12
System Temperature:	51.5 °C
Memory / Swap Utilization:	40.6 % / 0.0 %
NTP Offset (Server):	0.165 ms (162.159.200.123)
rootfs / userfs Free Space:	229.0 MB [23.5%] / 26.4 GB [94.8%]
IP address:	192.168.178.32 (eth0, DHCP)
Gateway / Netmask:	192.168.178.1 / 255.255.255.0
Nameservers:	192.168.178.1, 0.0.0.0
Hostname:	homematic-raspi
homematicIP-RF (HmIP) Info
RF-Module/Firmware:	HM-MOD-RPI-PCB (2.8.6)
Device-Node:	/dev/raw-uart (GPIO@3f201000.serial)
Address:	0xB22A71 (0xB22A71)
SGTIN:	XXXXXXXX
Serial:	XXXXXXX
DC / CS:	7 % / -1 %
HomeMatic-RF (HmRF) Info
RF-Module/Firmware:	HM-MOD-RPI-PCB (2.8.6)
Device-Node:	/dev/raw-uart (GPIO@3f201000.serial)
Address:	0x6CFE4B (0x6CFE4B)
Serial:	QEQ0406634
DC / CS:	7 % / -1 %

cat /var/hm_mode

Code: Alles auswählen

HM_HMIP_ADDRESS='XXXXXX'
HM_HMIP_ADDRESS_ACTIVE='XXXXXX'
HM_HMIP_DEV='HM-MOD-RPI-PCB'
HM_HMIP_DEVNODE='/dev/raw-uart'
HM_HMIP_DEVTYPE='GPIO@3f201000.serial'
HM_HMIP_SERIAL='XXXXXXX'
HM_HMIP_SGTIN='3014F711A061A7DA498F9C6A'
HM_HMIP_VERSION='2.8.6'
HM_HMRF_ADDRESS='0x6CFE4B'
HM_HMRF_ADDRESS_ACTIVE='0x6CFE4B'
HM_HMRF_DEV='HM-MOD-RPI-PCB'
HM_HMRF_DEVNODE='/dev/raw-uart'
HM_HMRF_DEVTYPE='GPIO@3f201000.serial'
HM_HMRF_SERIAL='QEQ0406634'
HM_HMRF_VERSION='2.8.6'
HM_HOST='rpi3'
HM_LED_GREEN='/sys/class/leds/ACT'
HM_LED_GREEN_MODE1='mmc0'
HM_LED_GREEN_MODE2='heartbeat'
HM_LED_RED='/sys/class/leds/PWR'
HM_LED_RED_MODE1='timer'
HM_LED_RED_MODE2='mmc0'
HM_LED_YELLOW=''
HM_LED_YELLOW_MODE1='none'
HM_LED_YELLOW_MODE2='none'
HM_MODE='NORMAL'
HM_RTC=''

Ist das normal? Wo kann ich sehen das beide laufen? Habe den Stick fertig https://www.piotek.de/HmIP-RFUSB-F und muss quasie verifizieren das dieser auch läuft. Grund ist wie in einem anderen Thread erwähnt das ich den Silvercrest HmIP-HAP-B1 als LAN Repeater verwenden will.



PS: Hier noch der output von dmesg . Scheint zmd erkannt worden zu sein

Code: Alles auswählen

[   14.838691] raw-uart raw-uart1: Registered new raw-uart device using underlying device eQ-3 HmIP-RFUSB@usb-3f980000.usb-1.4.
[   14.843266] usbcore: registered new interface driver hb_rf_usb_2

Code: Alles auswählen

root@homematic-raspi:~# dmesg 
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.1.21 (builder@35fe9e19c387) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot -g9133b58) 11.4.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Sat Aug 26 07:28:51 UTC 2023
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000003a000000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003dffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003dffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003dffffff]
[    0.000000] On node 0, zone DMA: 8192 pages in unavailable ranges
[    0.000000] percpu: Embedded 26 pages/cpu s69032 r8192 d29272 u106496
[    0.000000] pcpu-alloc: s69032 r8192 d29272 u106496 alloc=26*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 249984
[    0.000000] Kernel command line: dwc_otg.lpm_enable=0 sdhci_bcm2708.enable_llm=0 console=tty2 root=PARTUUID=deedbeef-02 ro rootfstype=ext4 fsck.repair=yes rootwait rootdelay=5 consoleblank=120 logo.nologo quiet loglevel=0 init_on_alloc=1 init_on_free=1 slab_nomerge iomem=relaxed net.ifnames=0 usb-storage.quirks=174c:55aa:u,2109:0715:u,152d:0578:u,152d:0579:u,152d:1561:u,174c:0829:u,14b0:0206:u,174c:225c:u  coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  empty
[    0.000000] Unknown kernel command line parameters "empty", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:on
[    0.000000] mem auto-init: clearing system memory may take some time...
[    0.000000] Memory: 909104K/1015808K available (10752K kernel code, 1884K rwdata, 3184K rodata, 3648K init, 970K bss, 41168K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 34411 entries in 135 pages
[    0.000000] ftrace: allocated 135 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000397] Console: colour dummy device 80x25
[    0.000477] printk: console [tty2] enabled
[    0.000554] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.000596] pid_max: default: 32768 minimum: 301
[    0.000786] LSM: Security Framework initializing
[    0.000822] Yama: becoming mindful.
[    0.001099] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.001130] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.003084] cgroup: Disabling memory control group subsystem
[    0.006287] cblist_init_generic: Setting adjustable number of callback queues.
[    0.006309] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.006586] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.007300] rcu: Hierarchical SRCU implementation.
[    0.007319] rcu: 	Max phase no-delay instances is 1000.
[    0.008714] EFI services will not be available.
[    0.009465] smp: Bringing up secondary CPUs ...
[    0.011061] Detected VIPT I-cache on CPU1
[    0.011252] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.013122] Detected VIPT I-cache on CPU2
[    0.013282] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.015067] Detected VIPT I-cache on CPU3
[    0.015211] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.015451] smp: Brought up 1 node, 4 CPUs
[    0.015482] SMP: Total of 4 processors activated.
[    0.015501] CPU features: detected: 32-bit EL0 Support
[    0.015518] CPU features: detected: CRC32 instructions
[    0.015698] CPU: All CPU(s) started at EL2
[    0.015714] alternatives: applying system-wide alternatives
[    0.017939] devtmpfs: initialized
[    0.044150] Enabled cp15_barrier support
[    0.044207] Enabled setend support
[    0.044540] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.044595] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.110085] pinctrl core: initialized pinctrl subsystem
[    0.111604] DMI not present or invalid.
[    0.112306] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.127181] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.127690] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.130222] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.130435] audit: initializing netlink subsys (disabled)
[    0.130881] audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
[    0.131621] thermal_sys: Registered thermal governor 'step_wise'
[    0.131756] cpuidle: using governor ladder
[    0.131859] cpuidle: using governor menu
[    0.132327] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.132636] ASID allocator initialised with 65536 entries
[    0.147184] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.165798] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start
[    0.169818] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
[    0.249840] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[    0.253672] SCSI subsystem initialized
[    0.254101] libata version 3.00 loaded.
[    0.254514] usbcore: registered new interface driver usbfs
[    0.254611] usbcore: registered new interface driver hub
[    0.254723] usbcore: registered new device driver usb
[    0.255331] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.255644] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[    0.256130] pps_core: LinuxPPS API ver. 1 registered
[    0.256150] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.256209] PTP clock support registered
[    0.257660] NetLabel: Initializing
[    0.257678] NetLabel:  domain hash size = 128
[    0.257695] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.257859] NetLabel:  unlabeled traffic allowed by default
[    0.258827] clocksource: Switched to clocksource arch_sys_counter
[    0.259822] VFS: Disk quotas dquot_6.6.0
[    0.259990] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.260308] FS-Cache: Loaded
[    0.260656] CacheFiles: Loaded
[    0.275823] NET: Registered PF_INET protocol family
[    0.276163] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.278594] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.278786] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.278889] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.279029] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.279408] TCP: Hash tables configured (established 8192 bind 8192)
[    0.279572] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.279667] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.280064] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.281155] RPC: Registered named UNIX socket transport module.
[    0.281176] RPC: Registered udp transport module.
[    0.281193] RPC: Registered tcp transport module.
[    0.281210] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.284008] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    2.012234] Initialise system trusted keyrings
[    2.012895] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    2.024878] zbud: loaded
[    2.029762] NFS: Registering the id_resolver key type
[    2.029828] Key type id_resolver registered
[    2.029846] Key type id_legacy registered
[    2.030004] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.030031] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    2.033123] Key type asymmetric registered
[    2.033152] Asymmetric key parser 'x509' registered
[    2.033298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.033690] io scheduler mq-deadline registered
[    2.033715] io scheduler kyber registered
[    2.043177] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes
[    2.043218] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
[    2.043940] Console: switching to colour frame buffer device 90x30
[    2.047050] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered!
[    2.054317] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    2.057805] bcm2835-rng 3f104000.rng: hwrng registered
[    2.058909] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    2.060964] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    2.081319] brd: module loaded
[    2.095155] loop: module loaded
[    2.095774] Loading iSCSI transport class v2.0-870.
[    2.100797] tun: Universal TUN/TAP device driver, 1.6
[    2.101745] usbcore: registered new interface driver lan78xx
[    2.101848] usbcore: registered new interface driver smsc95xx
[    2.101888] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.302951] Core Release: 2.80a
[    2.302977] Setting default values for core params
[    2.303012] Finished setting default values for core params
[    2.503574] Using Buffer DMA mode
[    2.503592] Periodic Transfer Interrupt Enhancement - disabled
[    2.503609] Multiprocessor Interrupt Enhancement - disabled
[    2.503626] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.503650] Dedicated Tx FIFOs mode

[    2.512481] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = ffffffc009869000 dma = 0x00000000fa400000 len=9024
[    2.512528] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    2.512552] dwc_otg: Microframe scheduler enabled

[    2.512636] WARN::hcd_init_fiq:496: MPHI regs_base at ffffffc009465000
[    2.512741] dwc_otg 3f980000.usb: DWC OTG Controller
[    2.512804] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    2.512875] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[    2.512939] Init: Port Power? op_state=1
[    2.512955] Init: Power Port (0)
[    2.513530] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    2.513559] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.513583] usb usb1: Product: DWC OTG Controller
[    2.513604] usb usb1: Manufacturer: Linux 6.1.21 dwc_otg_hcd
[    2.513625] usb usb1: SerialNumber: 3f980000.usb
[    2.514850] hub 1-0:1.0: USB hub found
[    2.514953] hub 1-0:1.0: 1 port detected
[    2.516327] dwc_otg: FIQ enabled
[    2.516347] dwc_otg: NAK holdoff enabled
[    2.516363] dwc_otg: FIQ split-transaction FSM enabled
[    2.516392] Module dwc_common_port init
[    2.518073] usbcore: registered new interface driver uas
[    2.518233] usbcore: registered new interface driver usb-storage
[    2.518760] mousedev: PS/2 mouse device common for all mice
[    2.525432] sdhci: Secure Digital Host Controller Interface driver
[    2.525456] sdhci: Copyright(c) Pierre Ossman
[    2.526329] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[    2.526352] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.531227] ledtrig-cpu: registered to indicate activity on CPUs
[    2.531335] hid: raw HID events driver (C) Jiri Kosina
[    2.531488] usbcore: registered new interface driver usbhid
[    2.531498] usbhid: USB HID core driver
[    2.537388] NET: Registered PF_PACKET protocol family
[    2.537823] Key type dns_resolver registered
[    2.539179] registered taskstats version 1
[    2.539212] Loading compiled-in X.509 certificates
[    2.540384] zswap: loaded using pool lzo/zbud
[    2.561450] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 71, base_baud = 31250000) is a 16550
[    2.562714] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.563158] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.564941] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.564956] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    2.592070] sdhost: log_buf @ 00000000d44c3f3a (c269c000)
[    2.627057] Indeed it is in host mode hprt0 = 00021501
[    2.642865] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.647423] of_cfs_init
[    2.647489] of_cfs_init: OK
[    2.650745] Waiting 5 sec before mounting root device...
[    2.690543] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.696817] mmc0: new high speed SDHC card at address aaaa
[    2.698065] mmcblk0: mmc0:aaaa SE32G 29.7 GiB 
[    2.702230]  mmcblk0: p1 p2 p3
[    2.703619] mmcblk0: mmc0:aaaa SE32G 29.7 GiB (quirks 0x00004000)
[    2.725332] mmc1: new high speed SDIO card at address 0001
[    2.818862] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.819125] Indeed it is in host mode hprt0 = 00001101
[    3.027390] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[    3.027446] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.028702] hub 1-1:1.0: USB hub found
[    3.028885] hub 1-1:1.0: 5 ports detected
[    3.318924] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.419408] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[    3.419439] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.422555] smsc95xx v2.0.0
[    3.518777] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=184)
[    3.520143] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:54:e4:11
[    3.598919] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[    3.705760] usb 1-1.4: New USB device found, idVendor=1b1f, idProduct=c020, bcdDevice= 1.00
[    3.705800] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.705825] usb 1-1.4: Product: eQ-3 HmIP-RFUSB
[    3.705846] usb 1-1.4: Manufacturer: Silicon Labs
[    3.705867] usb 1-1.4: SerialNumber: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXxx
[    7.916604] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[    7.916736] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    7.917666] devtmpfs: mounted
[    7.928462] Freeing unused kernel memory: 3648K
[    7.928675] Run /sbin/init as init process
[    7.928685]   with arguments:
[    7.928693]     /sbin/init
[    7.928702]     empty
[    7.928710]   with environment:
[    7.928718]     HOME=/
[    7.928726]     TERM=linux
[    8.598935] EXT4-fs: Mount option(s) incompatible with ext2
[    8.616732] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none.
[   10.418257] zram: Added device: zram0
[   10.452537] zram0: detected capacity change from 0 to 2054408
[   10.497958] Adding 1027200k swap on /dev/zram0.  Priority:75 extents:1 across:1027200k SSFS
[   10.580303] i2c_dev: i2c /dev entries driver
[   14.419308] udevd[1016]: starting version 3.2.11
[   14.468098] udevd[1017]: starting eudev-3.2.11
[   14.668515] generic_raw_uart: loading out-of-tree module taints kernel.
[   14.671937] pl011_raw_uart 3f201000.serial: there is not valid maps for state default
[   14.672201] pl011_raw_uart 3f201000.serial: Initialized pl011 device; mapbase=0x3f201000; irq=99; clockrate=48000000
[   14.672266] pl011_raw_uart 3f201000.serial: Missing I2C driver of rtc device, trying to load
[   14.672279] pl011_raw_uart 3f201000.serial: Requesting module i2c:rx8130
[   14.718613] rtc-ds1307: probe of 1-0032 failed with error -121
[   14.722612] rtc-ds1307: probe of 1-0032 failed with error -121
[   14.736544] raw-uart raw-uart: Reset radio module
[   14.838378] usb 1-1.4: Found eQ-3 HmIP-RFUSB with serial XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX at usb-3f980000.usb-1.4
[   14.838672] raw-uart raw-uart1: Reset radio module
[   14.838691] raw-uart raw-uart1: Registered new raw-uart device using underlying device eQ-3 HmIP-RFUSB@usb-3f980000.usb-1.4.
[   14.843266] usbcore: registered new interface driver hb_rf_usb_2
[   14.915012] raw-uart raw-uart: Registered new raw-uart device using underlying device GPIO@3f201000.serial.
[   14.957624] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.049149] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.093524] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[   15.099811] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   15.100554] usbcore: registered new interface driver brcmfmac
[   15.100848] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.bin failed with error -2
[   15.328898] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897
[   15.535810] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   15.539926] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
[   16.035936] NET: Registered PF_INET6 protocol family
[   16.038353] Segment Routing with IPv6
[   16.038401] In-situ OAM (IOAM) with IPv6
[   28.831287] raw-uart raw-uart: Reset radio module
[   29.011656] raw-uart raw-uart1: Reset radio module
[   31.088030] raw-uart raw-uart: Reset radio module
[   35.060945] raw-uart raw-uart: Reset radio module
[   35.319932] raw-uart raw-uart1: Reset radio module
[   36.754018] raw-uart raw-uart1: Reset radio module
[  158.006760] raw-uart raw-uart: Reset radio module
[  161.978288] raw-uart raw-uart: Reset radio module
[  163.153265] eq3loop: created slave mmd_hmip
[  163.154128] eq3loop: created slave mmd_bidcos
[  167.218474] eq3loop: eq3loop_open_slave() mmd_bidcos
[  167.218567] eq3loop: eq3loop_close_slave() mmd_bidcos
[  167.223224] eq3loop: eq3loop_open_slave() mmd_hmip
[  167.223337] eq3loop: eq3loop_close_slave() mmd_hmip
[  167.403106] eq3loop: eq3loop_open_slave() mmd_bidcos
[  192.050063] eq3loop: eq3loop_open_slave() mmd_hmip
[  192.050523] eq3loop: eq3loop_close_slave() mmd_hmip
[  192.055581] eq3loop: eq3loop_open_slave() mmd_hmip
[  192.055926] eq3loop: eq3loop_close_slave() mmd_hmip
[  192.057568] eq3loop: eq3loop_open_slave() mmd_hmip
[  192.057893] eq3loop: eq3loop_close_slave() mmd_hmip
[  192.074400] eq3loop: eq3loop_open_slave() mmd_hmip