meine Startseite sagt mir ... Es stehen Geräte-Firmware-Updates zur Verfügung
und listet den HmIP-eTRV-2 mit Neu 2.0.2 auf.
Bei eQ-3 habe ich leider nichts dazu gefunden, aber im Changelog steht folgendes:
Code: Alles auswählen
Achtung! Bitte verwenden Sie die Firmware-Datei nur in Verbindung mit der CCU2 ab
Version 2.29.22
Please note: Only use the firmware file in connection with the CCU2 from
Version 2.29.22
Changelog: HmIP-eTRV, HmIP-eTRV-2, HmIP-eTRV-2-UK
Version 1.2.002 - 20171024
----------------------------------------------------------------------------------------
Version:
Application: 2.0.002
Bootloader: 1.8.000
Library: 1.20.004
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* Correction for first boot after OTAU update
After the OTAU the loading of the parameters takes a little bit longer, therefore
it can happen that the default manual temperature instead of 20.0° is "off" in this
case.
** Modification
* Change to Version 2.0.002
Version 2.0.000 - 20170925
----------------------------------------------------------------------------------------
Version:
Application: 2.0.000
Bootloader: 1.8.000
Library: 1.20.004
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* Correction in Paging-Module HMOS-Library
Catched erros which could occure after an OTAU update to a newer paging module.
* Correction for the Optimum Start Stop function
After activating the optimum start stop function it is now executed correctly.
** Modification
* Change to Version 2.0.000
* Parameter extension for installer solution.
With the help of the new parameter "DISABLE_MSG_TO_AC" all transmissions to the
central address are suppressed. Also to the status receiver address if this is the
same as the central address.
Version 1.8.000 - 20170719
----------------------------------------------------------------------------------------
Version:
Application: 1.8.000
Bootloader: 1.8.000
Library: 1.20.003
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* Correction in temperature week program.
If one daily temperature profiles consist of only one switch time point, the switch
time point is skipped by midnight of the next day.
* Correction for set point temperature update after window open.
If window open is detected (extern/intern) and during this time the device get the
command "Eco-Mode", the device updated the set point temperature after window close
and "Eco-Mode" off to the old set point temperature.
* Correction for set point temperature update after weekprogram configuration.
If window open is detected (extern/intern) and during this time a new week program
is transmitted to the device, the device updated the set point temperature after
window close by using the new week program set point temperature.
* Extension for the Quick Veto Function.
If the quick veto function is active, the remaining time is transferred in the
status telegram.
* Behavior after aborting the factory reset.
If the factory reset is aborted or not executed until the end, the device performs
a reboot after the termination or after the timeout.
* Abort of Quick Veto by "Duration = 0".
If Quick Veto is active, Quick Veto can be aborted by the radio command
"Duration = 0". The device answers the radio telegram with an "Ack".
** Modification
* Change to Version 1.8.000
Version 1.6.003 - 20170202
----------------------------------------------------------------------------------------
Version:
Application: 1.6.003
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* Improved handling at quick-veto
Function is communicated to all link partner via a DEC-Command with
"Duration-Time", also to eTRV link partner.
** Modification
* Change to Version 1.6.003
Version 1.6.002 - 20170131
----------------------------------------------------------------------------------------
Version:
Application: 1.6.002
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* Improved handling at quick-veto
Function is communicated to the link partner via a DEC-Command with
"Duration-Time".
** Modification
* Change to Version 1.6.002
Version 1.6.001 - 20170127
----------------------------------------------------------------------------------------
Version:
Application: 1.6.001
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* After bugfix no more cyclic messages were sent after a manual operation.
** Modification
* Change to Version 1.6.001
Version 1.6.000 - 20170119
----------------------------------------------------------------------------------------
Version:
Application: 1.6.000
Bootloader: 1.8.000
Library: 1.18.004
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* If more than two radiator thermostats are linked to each other, now the temperature
fall detection is properly deactivated on all devices.
* The Application_Sequence_Number for TIME_INFO_REQUEST is increment after sending.
* If the device wait for incoming data, it don't responce to other requests.
* New data packages will not be sent until the current data transmission has finished.
** Modification
* Change to Version 1.6.000
* Implementation of Quick-Veto-Function
Version 1.4.002 - 20160608
----------------------------------------------------------------------------------------
Version:
Application: 1.4.002
Bootloader: 1.8.000
Library: 1.16.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* If the device is linked with a Remote-Control-Unit and the Parameter "ON_TIME" is
set, the temperature "TEMPERATURE_RC" is hold minimum for this time (also if the
time is > 1 Minute).
** Modification
* Change to Version 1.4.002
Version 1.4.001 - 20160602
----------------------------------------------------------------------------------------
Version:
Application: 1.4.001
Bootloader: 1.8.000
Library: 1.16.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.4.001
Version 1.2.013 - 20151209
----------------------------------------------------------------------------------------
Version:
Application: 1.2.013
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.2.013
Version 1.2.012 - 20151209
----------------------------------------------------------------------------------------
Version:
Application: 1.2.012
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* Window open temperature isn't overwritten, when activating the party function.
** Modification
* Change to Version 1.2.012
Version 1.2.011 - 20151201
----------------------------------------------------------------------------------------
Version:
Application: 1.2.011
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.2.011
Version 1.2.010 - 20151201
----------------------------------------------------------------------------------------
Version:
Application: 1.2.010
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
** Modification
* Change to Version 1.2.010
* Heating-Control in connection with a WTH shows occasionally two-point behavior
-> fixed
Version 1.2.009 - 20151111
----------------------------------------------------------------------------------------
Version:
Application: 1.2.009
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.2.009
Version 1.2.008 - 20151110
----------------------------------------------------------------------------------------
Version:
Application: 1.2.008
Bootloader: 1.8.000
Library: 1.12.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* In combination with multiple routers the device is reached via radio all the time.
* If a DEC is send with "actual temperature" and "4.5°C" as setpoint the device
performs nothing.
** Modification
* Change to Version 1.2.008
* Change in library -> m_rx_options.header.header.bidi to
m_rx_options.header.header.arr
* Modification of full-rx-timeout in the application for router functionality.
* Modification holiday period (start and end) must be transmitted as a status for CCU2
integration.
Version 1.2.007 - 20150702
-----------------------------------------------------------------------------------------
Version:
Application: 1.2.007
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.2.007
Version 1.2.006 - 20150702
----------------------------------------------------------------------------------------
Version:
Application: 1.2.006
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* At window-open, a manually change on the device, is now transferred correctly from
TRV link partners.
** Modification
* Change to Version 1.2.006
Version 1.2.005 - 20150625
----------------------------------------------------------------------------------------
Version:
Application: 1.2.005
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.2.005
Version 1.2.004 - 20150625
----------------------------------------------------------------------------------------
Version:
Application: 1.2.004
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* Window status of SWD link partner is reset when the link partner is deleted.
** Modification
* Change to Version 1.2.004
Version 1.2.003 - 20150624
----------------------------------------------------------------------------------------
Version:
Application: 1.2.003
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.2.003
Version 1.2.002 - 20150624
----------------------------------------------------------------------------------------
Version:
Application: 1.2.002
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* If the party mode is abort from the HAP, the party mode is immediately leave.
** Modification
* Change to Version 1.2.002
Version 1.2.001 - 20150612
----------------------------------------------------------------------------------------
Version:
Application: 1.2.001
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.2.001
Version 1.2.000 - 20150612
----------------------------------------------------------------------------------------
Version:
Application: 1.2.000
Bootloader: 1.8.000
Library: 1.10.000
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.2.000
Version 1.0.019 - 20150624
----------------------------------------------------------------------------------------
Version:
Application: 1.0.019
Bootloader: 1.8.000
HMOS: 1.6.002
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.0.019
Version 1.0.018 - 20150624
----------------------------------------------------------------------------------------
Version:
Application: 1.0.018
Bootloader: 1.8.000
HMOS: 1.6.002
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Bugfix
* If the party mode is abort from the HAP, the party mode is immediately leave.
** Modification
* Change to Version 1.0.018
Version 1.0.017 - 20150519
----------------------------------------------------------------------------------------
Version:
Application: 1.0.017
Bootloader: 1.4.001
HMOS: 1.6.002
** Related Hardware
* 1434136E, 1434230C, 1434231A
** Modification
* Change to Version 1.0.017
Version 1.0.016 - first release
----------------------------------------------------------------------------------------
** Related Hardware
* 1434136D, 1434230C, 1434231A
--- END OF FILE ---
Kann ja dann mal etwas dauern, bei 10 Heizkörperthermostate
Melde mich dann wieder ...
Gruß Dirk