RaspberryMatic 2.35.16.20180708 – Erfahrungsberichte

[Franzens]

Hi Alchy,

Denke du hast mich verwechselt....

[alchy]

Alchy... du hast aber mitbekommen, dass es unterschiedliche User sind, die unterschiedliche Probleme haben?

Naja, so unterschiedlich ist das nicht.
Bei dem einen läuft der CUxD Dienst nicht richtig - ein Drüberinstallieren der aktuellen und für die Firmware korrekten Version wäre ein Anfang.
und
bei dem anderen würde ich sagen läuft der IP Server nicht, es sei denn das Log wäre von 20:28.

Grundvoraussetzung für die weitere Hilfe, ist das Posten des >> Fehlerprotokoll << ca. 10min nach Neustart unter Angabe der Zeit, wo das Log geholt wurde.
und eine Ausgabe der laufenden Dienste auf der Shell.

Alchy

[Franzens]

Hier das Protokoll, hoffe ich hab’s richtig gemacht

Code: Alles auswählen

Jul  8 22:06:33 localhost syslog.info syslogd started: BusyBox v1.28.4
Jul  8 22:06:33 localhost user.notice kernel: klogd started: BusyBox v1.28.4 (2018-07-07 22:42:12 CEST)
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000] Linux version 4.14.50 (damato@bilbo) (gcc version 6.4.0 (Buildroot 2018.05-01337-gb99cf5b-dirty)) #1 SMP PREEMPT Sat Jul 7 23:03:12 CEST 2018
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] cma: Reserved 8 MiB at 0x3d800000
Jul  8 22:06:33 localhost user.debug kernel: [    0.000000] On node 0 totalpages: 253952
Jul  8 22:06:33 localhost user.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80c7e780, node_mem_map bcf3e000
Jul  8 22:06:33 localhost user.debug kernel: [    0.000000]   Normal zone: 2232 pages used for memmap
Jul  8 22:06:33 localhost user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jul  8 22:06:33 localhost user.debug kernel: [    0.000000]   Normal zone: 253952 pages, LIFO batch:31
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] percpu: Embedded 17 pages/cpu @bcee7000 s39052 r8192 d22388 u69632
Jul  8 22:06:33 localhost user.debug kernel: [    0.000000] pcpu-alloc: s39052 r8192 d22388 u69632 alloc=17*4096
Jul  8 22:06:33 localhost user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 251720
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000] Kernel command line: dwc_otg.lpm_enable=0 sdhci_bcm2708.enable_llm=0 console=tty2 kgdboc=tty2 scandelay=5 root=PARTUUID=efbeedde-02 ro noswap rootfstype=ext4 elevator=deadline fsck.repair=yes lapic rootwait rootdelay=5 consoleblank=0 logo.nologo loglevel=0 quiet usb-storage.quirks=  8250.nr_uarts=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  empty
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] Memory: 984920K/1015808K available (7168K kernel code, 548K rwdata, 2052K rodata, 1024K init, 705K bss, 22696K reserved, 8192K cma-reserved)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000] Virtual kernel memory layout:
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]     vmalloc : 0xbe800000 - 0xff800000   (1040 MB)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]     lowmem  : 0x80000000 - 0xbe000000   ( 992 MB)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]       .text : 0x80008000 - 0x80800000   (8160 kB)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]       .init : 0x80b00000 - 0x80c00000   (1024 kB)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]       .data : 0x80c00000 - 0x80c89168   ( 549 kB)
Jul  8 22:06:33 localhost user.notice kernel: [    0.000000]        .bss : 0x80c910fc - 0x80d41824   ( 706 kB)
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] ftrace: allocating 24821 entries in 73 pages
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] 	Tasks RCU enabled.
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
Jul  8 22:06:33 localhost user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Jul  8 22:06:33 localhost user.info kernel: [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Jul  8 22:06:33 localhost user.info kernel: [    0.000018] Switching to timer-based delay loop, resolution 52ns
Jul  8 22:06:33 localhost user.info kernel: [    0.000278] Console: colour dummy device 80x30
Jul  8 22:06:33 localhost user.info kernel: [    0.000296] console [tty2] enabled
Jul  8 22:06:33 localhost user.info kernel: [    0.000322] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Jul  8 22:06:33 localhost user.info kernel: [    0.000338] pid_max: default: 32768 minimum: 301
Jul  8 22:06:33 localhost user.info kernel: [    0.000641] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.000656] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.001620] Disabling memory control group subsystem
Jul  8 22:06:33 localhost user.info kernel: [    0.001698] CPU: Testing write buffer coherency: ok
Jul  8 22:06:33 localhost user.info kernel: [    0.002132] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jul  8 22:06:33 localhost user.info kernel: [    0.040052] Setting up static identity map for 0x100000 - 0x10003c
Jul  8 22:06:33 localhost user.info kernel: [    0.060042] Hierarchical SRCU implementation.
Jul  8 22:06:33 localhost user.info kernel: [    0.100115] smp: Bringing up secondary CPUs ...
Jul  8 22:06:33 localhost user.info kernel: [    0.170585] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Jul  8 22:06:33 localhost user.info kernel: [    0.240656] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Jul  8 22:06:33 localhost user.info kernel: [    0.310795] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Jul  8 22:06:33 localhost user.info kernel: [    0.310935] smp: Brought up 1 node, 4 CPUs
Jul  8 22:06:33 localhost user.info kernel: [    0.310947] SMP: Total of 4 processors activated (153.60 BogoMIPS).
Jul  8 22:06:33 localhost user.info kernel: [    0.310954] CPU: All CPU(s) started in HYP mode.
Jul  8 22:06:33 localhost user.info kernel: [    0.310960] CPU: Virtualization extensions available.
Jul  8 22:06:33 localhost user.info kernel: [    0.311749] devtmpfs: initialized
Jul  8 22:06:33 localhost user.notice kernel: [    0.323006] random: get_random_u32 called from bucket_table_alloc+0x100/0x254 with crng_init=0
Jul  8 22:06:33 localhost user.info kernel: [    0.324050] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
Jul  8 22:06:33 localhost user.info kernel: [    0.324302] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Jul  8 22:06:33 localhost user.info kernel: [    0.324320] futex hash table entries: 1024 (order: 4, 65536 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.324917] pinctrl core: initialized pinctrl subsystem
Jul  8 22:06:33 localhost user.info kernel: [    0.325754] NET: Registered protocol family 16
Jul  8 22:06:33 localhost user.info kernel: [    0.342691] DMA: preallocated 1024 KiB pool for atomic coherent allocations
Jul  8 22:06:33 localhost user.info kernel: [    0.348051] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Jul  8 22:06:33 localhost user.info kernel: [    0.348060] hw-breakpoint: maximum watchpoint size is 8 bytes.
Jul  8 22:06:33 localhost user.info kernel: [    0.350211] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
Jul  8 22:06:33 localhost user.info kernel: [    0.385103] bcm2835-dma 3f007000.dma: DMA legacy API manager at be813000, dmachans=0x1
Jul  8 22:06:33 localhost user.notice kernel: [    0.386634] SCSI subsystem initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.386877] usbcore: registered new interface driver usbfs
Jul  8 22:06:33 localhost user.info kernel: [    0.386932] usbcore: registered new interface driver hub
Jul  8 22:06:33 localhost user.info kernel: [    0.387026] usbcore: registered new device driver usb
Jul  8 22:06:33 localhost user.info kernel: [    0.390731] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-06-07 15:31
Jul  8 22:06:33 localhost user.info kernel: [    0.392444] clocksource: Switched to clocksource arch_sys_counter
Jul  8 22:06:33 localhost user.notice kernel: [    0.477219] VFS: Disk quotas dquot_6.6.0
Jul  8 22:06:33 localhost user.info kernel: [    0.477303] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul  8 22:06:33 localhost user.notice kernel: [    0.477533] FS-Cache: Loaded
Jul  8 22:06:33 localhost user.info kernel: [    0.477737] CacheFiles: Loaded
Jul  8 22:06:33 localhost user.info kernel: [    0.486582] NET: Registered protocol family 2
Jul  8 22:06:33 localhost user.info kernel: [    0.487339] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.487450] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.487637] TCP: Hash tables configured (established 8192 bind 8192)
Jul  8 22:06:33 localhost user.info kernel: [    0.487775] UDP hash table entries: 512 (order: 2, 16384 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.487820] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    0.488073] NET: Registered protocol family 1
Jul  8 22:06:33 localhost user.info kernel: [    0.488681] RPC: Registered named UNIX socket transport module.
Jul  8 22:06:33 localhost user.info kernel: [    0.488688] RPC: Registered udp transport module.
Jul  8 22:06:33 localhost user.info kernel: [    0.488694] RPC: Registered tcp transport module.
Jul  8 22:06:33 localhost user.info kernel: [    0.488701] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jul  8 22:06:33 localhost user.info kernel: [    0.490662] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
Jul  8 22:06:33 localhost user.info kernel: [    0.493909] workingset: timestamp_bits=14 max_order=18 bucket_order=4
Jul  8 22:06:33 localhost user.notice kernel: [    0.502298] FS-Cache: Netfs 'nfs' registered for caching
Jul  8 22:06:33 localhost user.notice kernel: [    0.502973] NFS: Registering the id_resolver key type
Jul  8 22:06:33 localhost user.notice kernel: [    0.503005] Key type id_resolver registered
Jul  8 22:06:33 localhost user.notice kernel: [    0.503012] Key type id_legacy registered
Jul  8 22:06:33 localhost user.info kernel: [    0.505132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Jul  8 22:06:33 localhost user.info kernel: [    0.505266] io scheduler noop registered
Jul  8 22:06:33 localhost user.info kernel: [    0.505274] io scheduler deadline registered (default)
Jul  8 22:06:33 localhost user.info kernel: [    0.505557] io scheduler cfq registered
Jul  8 22:06:33 localhost user.info kernel: [    0.505565] io scheduler mq-deadline registered
Jul  8 22:06:33 localhost user.info kernel: [    0.505572] io scheduler kyber registered
Jul  8 22:06:33 localhost user.info kernel: [    0.508771] BCM2708FB: allocated DMA memory fd910000
Jul  8 22:06:33 localhost user.info kernel: [    0.508803] BCM2708FB: allocated DMA channel 0 @ be813000
Jul  8 22:06:33 localhost user.info kernel: [    0.514179] Console: switching to colour frame buffer device 80x30
Jul  8 22:06:33 localhost user.info kernel: [    0.519551] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
Jul  8 22:06:33 localhost user.info kernel: [    0.521177] bcm2835-rng 3f104000.rng: hwrng registered
Jul  8 22:06:33 localhost user.info kernel: [    0.521334] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jul  8 22:06:33 localhost user.info kernel: [    0.521818] vc-sm: Videocore shared memory driver
Jul  8 22:06:33 localhost user.info kernel: [    0.522128] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
Jul  8 22:06:33 localhost user.info kernel: [    0.532507] brd: module loaded
Jul  8 22:06:33 localhost user.info kernel: [    0.542240] loop: module loaded
Jul  8 22:06:33 localhost user.info kernel: [    0.542254] Loading iSCSI transport class v2.0-870.
Jul  8 22:06:33 localhost user.info kernel: [    0.543045] libphy: Fixed MDIO Bus: probed
Jul  8 22:06:33 localhost user.info kernel: [    0.543148] usbcore: registered new interface driver lan78xx
Jul  8 22:06:33 localhost user.info kernel: [    0.543213] usbcore: registered new interface driver smsc95xx
Jul  8 22:06:33 localhost user.info kernel: [    0.543230] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jul  8 22:06:33 localhost user.warn kernel: [    0.743708] Core Release: 2.80a
Jul  8 22:06:33 localhost user.warn kernel: [    0.743718] Setting default values for core params
Jul  8 22:06:33 localhost user.warn kernel: [    0.743746] Finished setting default values for core params
Jul  8 22:06:33 localhost user.warn kernel: [    0.943999] Using Buffer DMA mode
Jul  8 22:06:33 localhost user.warn kernel: [    0.944007] Periodic Transfer Interrupt Enhancement - disabled
Jul  8 22:06:33 localhost user.warn kernel: [    0.944013] Multiprocessor Interrupt Enhancement - disabled
Jul  8 22:06:33 localhost user.warn kernel: [    0.944020] OTG VER PARAM: 0, OTG VER FLAG: 0
Jul  8 22:06:33 localhost user.warn kernel: [    0.944031] Dedicated Tx FIFOs mode
Jul  8 22:06:33 localhost user.warn kernel: [    0.944339] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbd904000 dma = 0xfd904000 len=9024
Jul  8 22:06:33 localhost user.warn kernel: [    0.944365] FIQ FSM acceleration enabled for :
Jul  8 22:06:33 localhost user.warn kernel: [    0.944365] Non-periodic Split Transactions
Jul  8 22:06:33 localhost user.warn kernel: [    0.944365] Periodic Split Transactions
Jul  8 22:06:33 localhost user.warn kernel: [    0.944365] High-Speed Isochronous Endpoints
Jul  8 22:06:33 localhost user.warn kernel: [    0.944365] Interrupt/Control Split Transaction hack enabled
Jul  8 22:06:33 localhost user.debug kernel: [    0.944374] dwc_otg: Microframe scheduler enabled
Jul  8 22:06:33 localhost user.warn kernel: [    0.944490] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805dbdec
Jul  8 22:06:33 localhost user.warn kernel: [    0.944503] WARN::hcd_init_fiq:460: FIQ ASM at 0x805dc144 length 36
Jul  8 22:06:33 localhost user.warn kernel: [    0.944518] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbe87e000
Jul  8 22:06:33 localhost user.info kernel: [    0.944583] dwc_otg 3f980000.usb: DWC OTG Controller
Jul  8 22:06:33 localhost user.info kernel: [    0.944615] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Jul  8 22:06:33 localhost user.info kernel: [    0.944650] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
Jul  8 22:06:33 localhost user.warn kernel: [    0.944699] Init: Port Power? op_state=1
Jul  8 22:06:33 localhost user.warn kernel: [    0.944705] Init: Power Port (0)
Jul  8 22:06:33 localhost user.info kernel: [    0.944970] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jul  8 22:06:33 localhost user.info kernel: [    0.944982] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul  8 22:06:33 localhost user.info kernel: [    0.944991] usb usb1: Product: DWC OTG Controller
Jul  8 22:06:33 localhost user.info kernel: [    0.945001] usb usb1: Manufacturer: Linux 4.14.50 dwc_otg_hcd
Jul  8 22:06:33 localhost user.info kernel: [    0.945010] usb usb1: SerialNumber: 3f980000.usb
Jul  8 22:06:33 localhost user.info kernel: [    0.945615] hub 1-0:1.0: USB hub found
Jul  8 22:06:33 localhost user.info kernel: [    0.945667] hub 1-0:1.0: 1 port detected
Jul  8 22:06:33 localhost user.debug kernel: [    0.946236] dwc_otg: FIQ enabled
Jul  8 22:06:33 localhost user.debug kernel: [    0.946243] dwc_otg: NAK holdoff enabled
Jul  8 22:06:33 localhost user.debug kernel: [    0.946249] dwc_otg: FIQ split-transaction FSM enabled
Jul  8 22:06:33 localhost user.debug kernel: [    0.946261] Module dwc_common_port init
Jul  8 22:06:33 localhost user.info kernel: [    0.946512] usbcore: registered new interface driver usb-storage
Jul  8 22:06:33 localhost user.info kernel: [    0.946690] mousedev: PS/2 mouse device common for all mice
Jul  8 22:06:33 localhost user.info kernel: [    0.946788] IR NEC protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.946794] IR RC5(x/sz) protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.946801] IR RC6 protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.946807] IR JVC protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.946813] IR Sony protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.946819] IR SANYO protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.946825] IR Sharp protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.946832] IR MCE Keyboard/mouse protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.946838] IR XMP protocol handler initialized
Jul  8 22:06:33 localhost user.info kernel: [    0.947751] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
Jul  8 22:06:33 localhost user.info kernel: [    0.948022] bcm2835-cpufreq: min=600000 max=1200000
Jul  8 22:06:33 localhost user.info kernel: [    0.948479] sdhci: Secure Digital Host Controller Interface driver
Jul  8 22:06:33 localhost user.info kernel: [    0.948485] sdhci: Copyright(c) Pierre Ossman
Jul  8 22:06:33 localhost user.info kernel: [    0.948858] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
Jul  8 22:06:33 localhost user.info kernel: [    0.949203] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
Jul  8 22:06:33 localhost user.info kernel: [    0.949315] sdhci-pltfm: SDHCI platform and OF driver helper
Jul  8 22:06:33 localhost user.info kernel: [    0.952321] ledtrig-cpu: registered to indicate activity on CPUs
Jul  8 22:06:33 localhost user.info kernel: [    0.952374] hidraw: raw HID events driver (C) Jiri Kosina
Jul  8 22:06:33 localhost user.info kernel: [    0.952492] usbcore: registered new interface driver usbhid
Jul  8 22:06:33 localhost user.info kernel: [    0.952495] usbhid: USB HID core driver
Jul  8 22:06:33 localhost user.info kernel: [    0.952915] vchiq: vchiq_init_state: slot_zero = bd980000, is_master = 0
Jul  8 22:06:33 localhost user.info kernel: [    0.954142] [vc_sm_connected_init]: start
Jul  8 22:06:33 localhost user.info kernel: [    0.962621] [vc_sm_connected_init]: end - returning 0
Jul  8 22:06:33 localhost user.info kernel: [    0.963035] ip_tables: (C) 2000-2006 Netfilter Core Team
Jul  8 22:06:33 localhost user.info kernel: [    0.963229] Initializing XFRM netlink socket
Jul  8 22:06:33 localhost user.info kernel: [    0.963247] NET: Registered protocol family 17
Jul  8 22:06:33 localhost user.notice kernel: [    0.963310] Key type dns_resolver registered
Jul  8 22:06:33 localhost user.notice kernel: [    0.963704] Registering SWP/SWPB emulation handler
Jul  8 22:06:33 localhost user.info kernel: [    0.964034] registered taskstats version 1
Jul  8 22:06:33 localhost user.info kernel: [    0.968586] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 166, base_baud = 31250000) is a 16550
Jul  8 22:06:33 localhost user.info kernel: [    0.969129] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
Jul  8 22:06:33 localhost user.info kernel: [    0.969135] mmc-bcm2835 3f300000.mmc: DMA channel allocated
Jul  8 22:06:33 localhost user.info kernel: [    1.023149] sdhost: log_buf @ bd907000 (fd907000)
Jul  8 22:06:33 localhost user.warn kernel: [    1.049095] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jul  8 22:06:33 localhost user.warn kernel: [    1.050683] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jul  8 22:06:33 localhost user.warn kernel: [    1.052228] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jul  8 22:06:33 localhost user.warn kernel: [    1.054963] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jul  8 22:06:33 localhost user.info kernel: [    1.102473] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Jul  8 22:06:33 localhost user.info kernel: [    1.103861] of_cfs_init
Jul  8 22:06:33 localhost user.info kernel: [    1.103963] of_cfs_init: OK
Jul  8 22:06:33 localhost user.info kernel: [    1.104686] Waiting 5 sec before mounting root device...
Jul  8 22:06:33 localhost user.notice kernel: [    1.127028] random: fast init done
Jul  8 22:06:33 localhost user.warn kernel: [    1.162550] Indeed it is in host mode hprt0 = 00021501
Jul  8 22:06:33 localhost user.info kernel: [    1.175491] mmc1: new high speed SDIO card at address 0001
Jul  8 22:06:33 localhost user.warn kernel: [    1.198009] mmc0: host does not support reading read-only switch, assuming write-enable
Jul  8 22:06:33 localhost user.info kernel: [    1.200566] mmc0: new high speed SDHC card at address 0007
Jul  8 22:06:33 localhost user.info kernel: [    1.200821] mmcblk0: mmc0:0007 SD32G 29.0 GiB
Jul  8 22:06:33 localhost user.info kernel: [    1.228010]  mmcblk0: p1 p2 p3
Jul  8 22:06:33 localhost user.info kernel: [    1.372497] usb 1-1: new high-speed USB device number 2 using dwc_otg
Jul  8 22:06:33 localhost user.warn kernel: [    1.372611] Indeed it is in host mode hprt0 = 00001101
Jul  8 22:06:33 localhost user.info kernel: [    1.612734] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Jul  8 22:06:33 localhost user.info kernel: [    1.612747] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  8 22:06:33 localhost user.info kernel: [    1.613336] hub 1-1:1.0: USB hub found
Jul  8 22:06:33 localhost user.info kernel: [    1.613418] hub 1-1:1.0: 5 ports detected
Jul  8 22:06:33 localhost user.info kernel: [    1.932481] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Jul  8 22:06:33 localhost user.info kernel: [    2.062673] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Jul  8 22:06:33 localhost user.info kernel: [    2.062686] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  8 22:06:33 localhost user.info kernel: [    2.065234] smsc95xx v1.0.6
Jul  8 22:06:33 localhost user.info kernel: [    2.155645] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d9:4f:09
Jul  8 22:06:33 localhost user.info kernel: [    2.252473] usb 1-1.5: new full-speed USB device number 4 using dwc_otg
Jul  8 22:06:33 localhost user.info kernel: [    2.400856] usb 1-1.5: New USB device found, idVendor=03eb, idProduct=204b
Jul  8 22:06:33 localhost user.info kernel: [    2.400869] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul  8 22:06:33 localhost user.info kernel: [    2.400879] usb 1-1.5: Product: CUL868
Jul  8 22:06:33 localhost user.info kernel: [    2.400888] usb 1-1.5: Manufacturer: busware.de
Jul  8 22:06:33 localhost user.info kernel: [    6.182211] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jul  8 22:06:33 localhost user.info kernel: [    6.182265] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jul  8 22:06:33 localhost user.info kernel: [    6.194271] devtmpfs: mounted
Jul  8 22:06:33 localhost user.info kernel: [    6.198107] Freeing unused kernel memory: 1024K
Jul  8 22:06:33 localhost user.warn kernel: [    6.488490] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
Jul  8 22:06:33 localhost user.info kernel: [    6.512866] EXT4-fs (mmcblk0p3): mounted filesystem with journalled data mode. Opts: data=journal
Jul  8 22:06:33 localhost user.info kernel: [    6.758151] i2c /dev entries driver
Jul  8 22:06:33 localhost user.info kernel: [    6.807412] rtc-ds1307 1-006f: registered as rtc0
Jul  8 22:06:33 localhost user.info kernel: [    6.807491] i2c i2c-1: new_device: Instantiated device mcp7941x at 0x6f
Jul  8 22:06:33 localhost user.info kernel: [    7.217496] tun: Universal TUN/TAP device driver, 1.6
Jul  8 22:06:33 localhost daemon.info kernel: [    7.393344] udevd[195]: starting version 3.2.5
Jul  8 22:06:33 localhost user.notice kernel: [    7.399893] random: udevd: uninitialized urandom read (16 bytes read)
Jul  8 22:06:33 localhost user.notice kernel: [    7.418005] random: udevd: uninitialized urandom read (16 bytes read)
Jul  8 22:06:33 localhost user.notice kernel: [    7.418126] random: udevd: uninitialized urandom read (16 bytes read)
Jul  8 22:06:33 localhost daemon.info kernel: [    7.488850] udevd[199]: starting eudev-3.2.5
Jul  8 22:06:33 localhost user.warn kernel: [    7.585495] generic_raw_uart: loading out-of-tree module taints kernel.
Jul  8 22:06:33 localhost user.info kernel: [    7.589136] pl011_raw_uart 3f201000.serial: No reset pin configured in device tree
Jul  8 22:06:33 localhost user.info kernel: [    7.589209] pl011_raw_uart 3f201000.serial: Initialized pl011 device; mapbase=0x3f201000; irq=87; clockrate=47999625
Jul  8 22:06:33 localhost user.info kernel: [    7.676717] cdc_acm 1-1.5:1.0: ttyACM0: USB ACM device
Jul  8 22:06:33 localhost user.info kernel: [    7.677840] usbcore: registered new interface driver cdc_acm
Jul  8 22:06:33 localhost user.info kernel: [    7.677852] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jul  8 22:06:33 localhost user.err kernel: [    7.766794] pinctrl-bcm2835 3f200000.gpio: pin gpio18 already requested by leds; cannot claim for 3f203000.i2s
Jul  8 22:06:33 localhost user.err kernel: [    7.767076] pinctrl-bcm2835 3f200000.gpio: pin-18 (3f203000.i2s) status -22
Jul  8 22:06:33 localhost user.err kernel: [    7.767257] pinctrl-bcm2835 3f200000.gpio: could not request pin 18 (gpio18) from group gpio18  on device pinctrl-bcm2835
Jul  8 22:06:33 localhost user.err kernel: [    7.767531] bcm2835-i2s 3f203000.i2s: Error applying setting, reverse things back
Jul  8 22:06:33 localhost user.warn kernel: [    7.767751] bcm2835-i2s: probe of 3f203000.i2s failed with error -22
Jul  8 22:06:34 localhost user.debug kernel: [    7.872302] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
Jul  8 22:06:34 localhost user.err kernel: [    7.878856] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
Jul  8 22:06:34 localhost user.info kernel: [    7.879443] usbcore: registered new interface driver brcmfmac
Jul  8 22:06:34 localhost user.err kernel: [    8.087835] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
Jul  8 22:06:34 localhost user.err kernel: [    8.088683] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
Jul  8 22:06:39 localhost user.notice kernel: [   12.894518] random: crng init done
Jul  8 22:06:39 localhost user.notice kernel: [   12.894528] random: 4 urandom warning(s) missed due to ratelimiting
Jul  8 22:06:39 localhost user.notice rfkill: block set for type bluetooth
Jul  8 22:06:39 localhost user.info kernel: [   13.174844] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Jul  8 22:06:39 localhost syslog.info syslogd exiting
Jul  8 22:06:39 homematic-ccu2 syslog.info syslogd started: BusyBox v1.28.4
Jul  8 22:06:39 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.28.4 (2018-07-07 22:42:12 CEST)
Jul  8 22:06:40 homematic-ccu2 user.info kernel: [   14.761518] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Jul  8 22:06:41 homematic-ccu2 user.info kernel: [   15.596314] NET: Registered protocol family 10
Jul  8 22:06:41 homematic-ccu2 user.info kernel: [   15.598682] Segment Routing with IPv6
Jul  8 22:06:42 homematic-ccu2 user.info kernel: [   15.960135] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jul  8 22:06:42 homematic-ccu2 user.info firewall: configuration set
Jul  8 22:06:42 homematic-ccu2 user.notice rfkill: block set for type wlan
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(wlan0)[401]: ifplugd 0.28 initializing, using NETLINK device monitoring.
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(wlan0)[401]: Using interface wlan0/B8:27:EB:8C:1A:5C with driver <brcmfmac> (version: 7.45.98.38)
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(wlan0)[401]: Using detection mode: wireless extension
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(wlan0)[401]: Initialization complete, link beat not detected, interface enabled.
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(eth0)[405]: ifplugd 0.28 initializing.
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(eth0)[405]: Using interface eth0/B8:27:EB:D9:4F:09 with driver <smsc95xx> (version: 22-Aug-2005)
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(eth0)[405]: Using detection mode: SIOCETHTOOL
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(eth0)[405]: Initialization complete, link beat detected.
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(eth0)[405]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Jul  8 22:06:42 homematic-ccu2 daemon.warn ifplugd(eth0)[405]: client: ifup: interface eth0 already configured
Jul  8 22:06:42 homematic-ccu2 daemon.info ifplugd(eth0)[405]: Program executed successfully.
Jul  8 22:06:48 homematic-ccu2 daemon.notice ntpdate[409]: step time server 192.168.178.1 offset -0.069984 sec
Jul  8 22:06:48 homematic-ccu2 daemon.notice ntpd[412]: ntpd 4.2.8p11@1.3728-o Sat Jul  7 20:54:37 UTC 2018 (1): Starting
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[412]: Command line: /usr/sbin/ntpd -g Fritz.box
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: proto: precision = 0.989 usec (-20)
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: Listen and drop on 0 v6wildcard [::]:123
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: Listen normally on 2 lo 127.0.0.1:123
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: Listen normally on 3 eth0 192.168.178.22:123
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: Listen normally on 4 lo [::1]:123
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: Listen normally on 5 eth0 [2a02:810d:1a80:5a8:ba27:ebff:fed9:4f09]:123
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: Listen normally on 6 eth0 [fe80::ba27:ebff:fed9:4f09%2]:123
Jul  8 22:06:48 homematic-ccu2 daemon.info ntpd[414]: Listening on routing socket on fd #23 for interface updates
Jul  8 22:06:48 homematic-ccu2 daemon.err xinetd[435]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
Jul  8 22:06:48 homematic-ccu2 daemon.crit xinetd[435]: 435 {init_services} no services. Exiting...
Jul  8 22:06:48 homematic-ccu2 auth.info sshd[457]: Server listening on 0.0.0.0 port 22.
Jul  8 22:06:48 homematic-ccu2 auth.info sshd[457]: Server listening on :: port 22.
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: write_pid /var/run/cuxd.pid [508]
Jul  8 22:06:49 homematic-ccu2 user.info homematic: started cux-daemon
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: CUx-Daemon(2.0.1) on CCU(2.35.16.20180708) start PID:508
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9895 update(-54s):Sun Jul  8 22:05:55 2018
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: 8 device-paramset(s) loaded ok!
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: write_proxy /var/cache/cuxd_proxy.ini (508 /usr/local/addons/cuxd/ 2.0.1 2.35.16.20180708 0)
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: add interface 'CUxD'
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: write interface(1) 'BidCos-RF' to /usr/local/etc/config/InterfacesList.xml
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: write interface(2) 'VirtualDevices' to /usr/local/etc/config/InterfacesList.xml
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: write interface(3) 'HmIP-RF' to /usr/local/etc/config/InterfacesList.xml
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: write interface(4) 'CUxD' to /usr/local/etc/config/InterfacesList.xml
Jul  8 22:06:49 homematic-ccu2 daemon.info cuxd[508]: USB(1-1.5/ttyACM0) CUL868 connect(9600:8N1)
Jul  8 22:06:49 homematic-ccu2 user.info root: Updating RF Lan Gateway Coprocessor Firmware
Jul  8 22:06:49 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Jul  8 22:06:49 homematic-ccu2 user.info root: Updating RF Lan Gateway Firmware
Jul  8 22:06:49 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Jul  8 22:06:49 homematic-ccu2 user.info root: Updating Wired Lan Gateway Firmware
Jul  8 22:06:49 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Jul  8 22:06:51 homematic-ccu2 user.err setlgwkey: Could not find gateway by unicast with ip 192.168.178.85. Trying search by serial number.
Jul  8 22:06:59 homematic-ccu2 user.err setlgwkey: Could not find Lan Gateway using ip and serial number
Jul  8 22:06:59 homematic-ccu2 user.err setlgwkey: Cannot determine IP address of gateway with serial KEQ1065505
Jul  8 22:06:59 homematic-ccu2 daemon.info snmpd[574]: Created directory: /var/lib/snmp
Jul  8 22:06:59 homematic-ccu2 daemon.info snmpd[574]: Created directory: /var/lib/snmp/cert_indexes
Jul  8 22:06:59 homematic-ccu2 daemon.info snmpd[574]: Created directory: /var/lib/snmp/mib_indexes
Jul  8 22:06:59 homematic-ccu2 daemon.info snmpd[574]: Turning on AgentX master support.
Jul  8 22:06:59 homematic-ccu2 daemon.info snmpd[577]: NET-SNMP version 5.7.3
Jul  8 22:06:59 homematic-ccu2 user.info kernel: [   33.721269] eq3loop: created slave mmd_hmip
Jul  8 22:06:59 homematic-ccu2 user.info kernel: [   33.721494] eq3loop: created slave mmd_bidcos
Jul  8 22:07:01 homematic-ccu2 user.info kernel: [   35.898906] eq3loop: eq3loop_open_slave() mmd_bidcos
Jul  8 22:07:18 homematic-ccu2 user.info kernel: [   52.095516] eq3loop: eq3loop_open_slave() mmd_hmip
Jul  8 22:07:18 homematic-ccu2 user.info kernel: [   52.095758] eq3loop: eq3loop_close_slave() mmd_hmip
Jul  8 22:07:18 homematic-ccu2 user.info kernel: [   52.098855] eq3loop: eq3loop_open_slave() mmd_hmip
Jul  8 22:07:18 homematic-ccu2 user.info kernel: [   52.099056] eq3loop: eq3loop_close_slave() mmd_hmip
Jul  8 22:07:18 homematic-ccu2 user.info kernel: [   52.108915] eq3loop: eq3loop_open_slave() mmd_hmip
Jul  8 22:07:22 homematic-ccu2 daemon.warn cuxd[508]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Jul  8 22:07:25 homematic-ccu2 daemon.warn cuxd[508]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Jul  8 22:07:27 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Jul  8 22:07:27 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Jul  8 22:07:30 homematic-ccu2 user.info homematic: cloudmatic.de loophammer startet openvpn.
Jul  8 22:07:30 homematic-ccu2 daemon.warn openvpn[812]: WARNING: file '/usr/local/etc/config/addons/mh/client.key' is group or others accessible
Jul  8 22:07:30 homematic-ccu2 daemon.warn openvpn[813]: WARNING: --ns-cert-type is DEPRECATED.  Use --remote-cert-tls instead.
Jul  8 22:07:33 homematic-ccu2 daemon.err ifplugd(wlan0)[401]: NLAPI: Packet too small or truncated!
Jul  8 22:07:33 homematic-ccu2 daemon.notice openvpn[813]: do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Jul  8 22:07:33 homematic-ccu2 daemon.info ifplugd(wlan0)[401]: Exiting.
Jul  8 22:07:33 homematic-ccu2 daemon.warn openvpn[813]: ERROR: Linux route add command failed: external program exited with error status: 2
Jul  8 22:07:33 homematic-ccu2 daemon.warn openvpn[813]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Jul  8 22:07:34 homematic-ccu2 daemon.info ntpd[414]: Listen normally on 7 tun0 10.220.126.101:123
Jul  8 22:07:34 homematic-ccu2 daemon.info ntpd[414]: Listen normally on 8 tun0 [fe80::8af0:97d0:4271:96d7%4]:123
Jul  8 22:07:41 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"NEQ0120528:1","BRIGHTNESS"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"00095569A36A86:1","MOTION"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: MOTION"] [iseXmlRpc.cpp:2605]
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jul  8 22:07:41 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"MEQ1797556:1","BRIGHTNESS"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul  8 22:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"00095569A36A86:1","ILLUMINATION"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ILLUMINATION"] [iseXmlRpc.cpp:2605]
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jul  8 22:07:42 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"NEQ1544301:1","BRIGHTNESS"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jul  8 22:07:42 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"KEQ0972633:1","BRIGHTNESS"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jul  8 22:07:42 homematic-ccu2 local0.err ReGaHss: Error: IseSingleCondition::GetValData - invalid object ID [iseCondition.cpp:695]
Jul  8 22:07:46 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: object chn = dom.GetObject('2019'); object oOverflow = chn.DPByControl('POWERMETER_PSM.ENERGY_COUNTER_OVERFLOW'); object oEnergyCounter = chn.DPByControl('POWERMETER_PSM.ENERGY_COUNTER'); object oSysVarEnergyCounter = dom.GetObject('svEnergyCounter_2019_000855699C382A:7'); object oSysVarEnergyCounterOldVal = dom.GetObject('svEnergyCounterOldVal_2019'); boolean overFlowFlag = oOverflow.Value(); real devVal = oEnergyCounte
.Value(); real devValMax = oEnergyCounter.ValueMax(); real oldDevVal = oSysVarEnergyCounterOldVal.Value(); real diffVal = 0.0; real sysVarVal = oSysVarEnergyCounter.Value(); integer tmp_devVal = (devVal.ToString().ToFloat() * 1000).ToInteger(); integer tmp_oldDevVal = (oldDevVal.ToString().ToFloat() * 1000).ToInteger(); if (overFlowFlag == false) { ! Normal conditions if (tmp_oldDevVal <= tmp_devVal) { diffVal = devVal - oldDevVal; } ! Device has rebooted if (tmp_oldDevVal > tmp_devVal) { diffVal = devVal
 } } else { !overFlow 
Jul  8 22:07:46 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: object chn = dom.GetObject('2037'); object oOverflow = chn.DPByControl('POWERMETER_PSM.ENERGY_COUNTER_OVERFLOW'); object oEnergyCounter = chn.DPByControl('POWERMETER_PSM.ENERGY_COUNTER'); object oSysVarEnergyCounter = dom.GetObject('svEnergyCounter_2037_000855699C382A:7'); object oSysVarEnergyCounterOldVal = dom.GetObject('svEnergyCounterOldVal_2037'); boolean overFlowFlag = oOverflow.Value(); real devVal = oEnergyCounte
.Value(); real devValMax = oEnergyCounter.ValueMax(); real oldDevVal = oSysVarEnergyCounterOldVal.Value(); real diffVal = 0.0; real sysVarVal = oSysVarEnergyCounter.Value(); integer tmp_devVal = (devVal.ToString().ToFloat() * 1000).ToInteger(); integer tmp_oldDevVal = (oldDevVal.ToString().ToFloat() * 1000).ToInteger(); if (overFlowFlag == false) { ! Normal conditions if (tmp_oldDevVal <= tmp_devVal) { diffVal = devVal - oldDevVal; } ! Device has rebooted if (tmp_oldDevVal > tmp_devVal) { diffVal = devVal
 } } else { !overFlow 
Jul  8 22:07:47 homematic-ccu2 daemon.info cuxd[1007]: system(/usr/local/addons/alexa/alexa_remote_control_plain.sh -d Alexa_Schlafzimmer -r s42824) exit(1) 6s
Jul  8 22:07:51 homematic-ccu2 daemon.info cuxd[508]: INIT 'xmlrpc_bin://127.0.0.1:1999' '4423'
Jul  8 22:08:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"000855699C382A:5","PROCESS",0} result= [faultCode:-321,faultString:""] [iseXmlRpc.cpp:2605]
Jul  8 22:08:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Jul  8 22:08:13 homematic-ccu2 local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 2005 [iseManageDP.cpp:439]
Jul  8 22:08:14 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}]}) on binary://127.0.0.1:1999/RPC2:
Jul  8 22:08:14 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:08:15 homematic-ccu2 user.err rfd: HSSParameter::SetValue() false Put failed
Jul  8 22:08:15 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"NEQ0112315:1","STATE",false} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Jul  8 22:08:15 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1502]
Jul  8 22:08:15 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = NEQ0112315:1 [iseDOMdpHSS.cpp:77]
Jul  8 22:08:25 homematic-ccu2 user.err rfd: HSSParameter::SetValue() false Put failed
Jul  8 22:08:25 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"NEQ0112319:1","STATE",false} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Jul  8 22:08:25 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1502]
Jul  8 22:08:25 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = NEQ0112319:1 [iseDOMdpHSS.cpp:77]
Jul  8 22:08:33 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"000855699C382A:5","ON_TIME",0} result= [faultCode:-321,faultString:""] [iseXmlRpc.cpp:2605]
Jul  8 22:08:33 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Jul  8 22:08:33 homematic-ccu2 local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 2002 [iseManageDP.cpp:439]
Jul  8 22:08:33 homematic-ccu2 daemon.err cuxd[508]: sendbinrpc(127.0.0.1:1999) connect(7s) Connection timed out
Jul  8 22:08:34 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","KEQ0721770:4","CONTROL_MODE",1}],[methodName:"event",params:{"1007","KEQ0721770:4","FAULT_REPORTING",0}],[methodName:"event",params:{"1007","KEQ0721770:4","BOOST_STATE",0}],[methodName:"event",params:{"1007","KEQ0721770:4","SET_TEMPERATURE",30.000000}],[methodN
me:"event",params:{"1007","KEQ0721770:4","PARTY_TEMPERATURE",5.000000}],[methodName:"event",params:{"1007","KEQ0721770:4","PARTY_START_TIME",0}],[methodName:"event",params:{"1007","KEQ0721770:4","PARTY_START_DAY",1}],[methodName:"event",params:{"1007","KEQ0721770:4","PARTY_START_MONTH",1}],[methodName:"event",params:{"1007","KEQ0721770:4","PARTY_START_YEAR",0}],[methodName:"event",params:{"1007","KEQ0721770:4","PARTY_STOP_TIME",0}],[methodName:"event",params:{"1007","KEQ0721770:4","PARTY_STOP_DAY",1}],[me
hodName:"event",param
Jul  8 22:08:34 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:08:40 homematic-ccu2 daemon.err cuxd[508]: sendbinrpc(127.0.0.1:1999) connect(7s) Connection timed out
Jul  8 22:08:40 homematic-ccu2 daemon.warn cuxd[508]: disable events to 127.0.0.1:1999
Jul  8 22:08:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"000855699C382A:4","STATE",0} result= [faultCode:-321,faultString:""] [iseXmlRpc.cpp:2605]
Jul  8 22:08:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Jul  8 22:08:53 homematic-ccu2 local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1956 [iseManageDP.cpp:439]
Jul  8 22:08:54 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","NEQ0112315:0","UNREACH",true}],[methodName:"event",params:{"1007","NEQ0112315:0","STICKY_UNREACH",true}],[methodName:"event",params:{"1007","LEQ0660584:6","PRESS_LONG",true}],[methodName:"event",params:{"1007","LEQ0660584:6","INSTALL_TEST",true}],[methodName:"event",params:{"1007","LEQ0660584:6","PRESS_LONG_RELEASE",true}],[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[met
odName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","KEQ0721770:4","CONTROL_MODE",1}],[methodName:"event",params:{"1007","KEQ0721770:4","FAULT_REPORTING",0}],[methodName:"event",params:{"1007","KEQ0721770:4","BOOST_STATE",0}],[methodName:"event",params:{"1007","KEQ0721770:4","SET_TEMPERATURE",30.000000}],[methodName:"event",params:{"1007","KEQ0721770:4","PARTY_TEMPERATURE",5.000000}],[methodName:"event",params:{"1007","KEQ0721770:4","PARTY_START_TIME",0}],[met
odName:"event",params
Jul  8 22:08:54 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:09:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"000855699C382A:4","SECTION",0} result= [faultCode:-321,faultString:""] [iseXmlRpc.cpp:2605]
Jul  8 22:09:13 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Jul  8 22:09:13 homematic-ccu2 local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1952 [iseManageDP.cpp:439]
Jul  8 22:09:14 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","KEQ0909576:4","CONTROL_MODE",1}],[methodName:"event",params:{"1007","KEQ0909576:4","FAULT_REPORTING",0}],[methodName:"event",pa
ams:{"1007","KEQ0909576:4","BATTERY_STATE",2.800000}],[methodName:"event",params:{"1007","KEQ0909576:4","VALVE_STATE",99}],[methodName:"event",params:{"1007","KEQ0909576:4","BOOST_STATE",0}],[methodName:"event",params:{"1007","KEQ0909576:4","ACTUAL_TEMPERATURE",22.000000}],[methodName:"event",params:{"1007","KEQ0909576:4","SET_TEMPERATURE",30.000000}],[methodName:"event",params:{"1007","KEQ0909576:4","PARTY_TEMPERATURE",5.000000}],[methodName:"event",params:{"1007","KEQ0909576:4","PARTY_START_TIME",0}],[m
thodName:"event",para
Jul  8 22:09:14 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:09:33 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"000855699C382A:4","PROCESS",0} result= [faultCode:-321,faultString:""] [iseXmlRpc.cpp:2605]
Jul  8 22:09:33 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Jul  8 22:09:33 homematic-ccu2 local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1951 [iseManageDP.cpp:439]
Jul  8 22:09:34 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0077887:2","ACTUAL_TEMPERATURE",23.000000}],[methodName:"event",params:{"1007","LEQ0077887:2","ACTUAL_HUMIDITY",53.000000}],[methodName:"event",params:{"1007","LEQ0077887:2","SET_TEMPERATURE",30.000000}],[methodName:"event",params:{"1007","LEQ0043345:1","STA
E",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0660584:6","INSTALL_TEST",true}],[methodName:"event",params:{"1007","LEQ0660584:6","INSTALL_TEST",true}],[methodName:"event",params:{"1007","KEQ0967846:2","BOOT",true}],[methodName:"event",params:{"1007","KEQ0967846:2","ENERGY_COUNTER",22324.800000}],[methodName:"event",params:{"1007","KEQ0967846:2","POWER",0.100000}],[methodName:"event",params:{"1007","KEQ0967846:2","CURRENT",32.000000}],
methodName:"event",pa
Jul  8 22:09:34 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:09:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"000855699C382A:4","ON_TIME",0} result= [faultCode:-321,faultString:""] [iseXmlRpc.cpp:2605]
Jul  8 22:09:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Jul  8 22:09:53 homematic-ccu2 local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1946 [iseManageDP.cpp:439]
Jul  8 22:09:54 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0077887:1","TEMPERATURE",23.000000}],[methodName:"event",params:{"1007","LEQ0077887:1","HUMIDITY",53}],[methodName:"event",params:{"1007","LEQ0660584:6","INSTALL_TEST",true}],[methodName:"event",params:{"1007","LEQ0660584:6","PRESS_LONG",true}],[methodName:"
vent",params:{"1007","LEQ0660584:6","PRESS_LONG_RELEASE",true}],[methodName:"event",params:{"1007","KEQ0909226:4","CONTROL_MODE",0}],[methodName:"event",params:{"1007","KEQ0909226:4","FAULT_REPORTING",0}],[methodName:"event",params:{"1007","KEQ0909226:4","BATTERY_STATE",2.200000}],[methodName:"event",params:{"1007","KEQ0909226:4","VALVE_STATE",0}],[methodName:"event",params:{"1007","KEQ0909226:4","BOOST_STATE",0}],[methodName:"event",params:{"1007","KEQ0909226:4","ACTUAL_TEMPERATURE",20.600000}],[methodNa
e:"event",params:{"10
Jul  8 22:09:54 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:10:14 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0396912:2","PRESS_SHORT",true}],[methodName:"event",params:{"1007","LEQ0396912:2","INSTALL_TEST",true}],[methodName:"event",params:{"1007","MEQ0393647:1","BRIGHTNESS",5}],[methodName:"event",params:{"1007","LEQ0396912:2","INSTALL_TEST",true}],[methodName:"ev
nt",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0396912:2","PRESS_LONG",true}],[methodName:"event",params:{"1007","LEQ0396912:2","INSTALL_TEST",true}],[methodName:"event",params:{"1007","LEQ0396912:2","PRESS_LONG_RELEASE",true}],[methodName:"event",params:{"1007","LEQ0396912:2","PRESS_SHORT",true}],[methodName:"event",params:{"1007","LEQ0396912:2","PRESS_SHORT",true}],[methodName:"event",params:{"1
07","LEQ0396912:2","I
Jul  8 22:10:14 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:10:33 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"000855699C382A:2","PRESS_SHORT",0} result= [faultCode:-321,faultString:""] [iseXmlRpc.cpp:2605]
Jul  8 22:10:33 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Jul  8 22:10:33 homematic-ccu2 local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1940 [iseManageDP.cpp:439]
Jul  8 22:10:34 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0123734:1","PRESS_SHORT",true}],[methodName:"event",params:{"1007","LEQ0123734:1","INSTALL_TEST",true}],[methodName:"event",params:{"1007","LEQ0123734:1","INSTALL_TEST",true}],[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"eve
t",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0123734:1","INSTALL_TEST",true}],[methodName:"event",params:{"1007","LEQ0123734:1","PRESS_LONG",true}],[methodName:"event",params:{"1007","LEQ0123734:1","INSTALL_TEST",true}],[methodName:"event",params:{"1007","LEQ0123734:1","PRESS_LONG_RELEASE",true}],[methodName:"event",params:{"1007","LEQ0123734:2","PRESS_SHORT",true}],[methodName:"event",params:{"1007","LEQ0123734:2","INSTALL_TEST",true}],[methodName:"event",para
s:{"1007","LEQ0043345
Jul  8 22:10:34 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:10:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"000855699C382A:1","PRESS_SHORT",0} result= [faultCode:-321,faultString:""] [iseXmlRpc.cpp:2605]
Jul  8 22:10:53 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Jul  8 22:10:53 homematic-ccu2 local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1937 [iseManageDP.cpp:439]
Jul  8 22:10:53 homematic-ccu2 user.debug hm_deldev: event fired (delete 000855699C382A)
Jul  8 22:10:54 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::ClearChannelDPs: pointer is null [iseXmlRpc.cpp:4723]
Jul  8 22:10:54 homematic-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","MEQ0863202:1","TEMPERATURE",22.000000}],[methodName:"event",params:{"1007","MEQ0863202:1","HUMIDITY",58}],[methodName:"event",p
rams:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}],[methodName:"event",params:{"1007","LEQ0043345:1","STATE",false}],[methodName:"event",params:{"1007","LEQ0043345:1","WORKING",false}]}) on binary://127.0.0.1:1999/RPC2:
Jul  8 22:10:54 homematic-ccu2 user.err rfd: XmlRpc transport error
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[508]: CUx-Daemon restart(1)
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[508]: unlink(/var/cache/cuxd_proxy.ini)
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[508]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9929
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[508]: USB(1-1.5/ttyACM0) CUL868 disconnect
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[1474]: write_pid /var/run/cuxd.pid [1474]
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[1474]: CUx-Daemon(2.0.1) on CCU(2.35.16.20180708) start PID:1474
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[1474]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9929 update(0s):Sun Jul  8 22:23:16 2018
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[1474]: 8 device-paramset(s) loaded ok!
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[1474]: write_proxy /var/cache/cuxd_proxy.ini (1474 /usr/local/addons/cuxd/ 2.0.1 2.35.16.20180708 0)
Jul  8 22:23:16 homematic-ccu2 daemon.warn cuxd[1474]: init() '' not supported
Jul  8 22:23:16 homematic-ccu2 daemon.info cuxd[1474]: USB(1-1.5/ttyACM0) CUL868 connect(9600:8N1)
Jul  8 22:23:36 homematic-ccu2 daemon.info cuxd[1474]: CUx-Daemon stop(2)
Jul  8 22:23:36 homematic-ccu2 daemon.info cuxd[1474]: unlink(/var/cache/cuxd_proxy.ini)
Jul  8 22:23:36 homematic-ccu2 daemon.info cuxd[1474]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9929
Jul  8 22:23:36 homematic-ccu2 daemon.info cuxd[1474]: USB(1-1.5/ttyACM0) CUL868 disconnect
Jul  8 22:23:36 homematic-ccu2 daemon.info cuxd[1474]: unlink(/var/run/cuxd.pid)
Jul  8 22:24:29 homematic-ccu2 daemon.info cuxd[1514]: write_pid /var/run/cuxd.pid [1514]
Jul  8 22:24:29 homematic-ccu2 daemon.info cuxd[1514]: CUx-Daemon(2.0.1) on CCU(2.35.16.20180708) start PID:1514
Jul  8 22:24:29 homematic-ccu2 daemon.info cuxd[1514]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9929 update(-53s):Sun Jul  8 22:23:36 2018
Jul  8 22:24:29 homematic-ccu2 user.info homematic: started (restart) cux-daemon
Jul  8 22:24:29 homematic-ccu2 daemon.info cuxd[1514]: 8 device-paramset(s) loaded ok!
Jul  8 22:24:29 homematic-ccu2 daemon.info cuxd[1514]: write_proxy /var/cache/cuxd_proxy.ini (1514 /usr/local/addons/cuxd/ 2.0.1 2.35.16.20180708 0)
Jul  8 22:24:29 homematic-ccu2 daemon.warn cuxd[1514]: init() '' not supported
Jul  8 22:24:29 homematic-ccu2 daemon.info cuxd[1514]: USB(1-1.5/ttyACM0) CUL868 connect(9600:8N1)
Jul  8 22:29:24 homematic-ccu2 user.notice rfkill: unblock set for id 0
Jul  8 22:29:24 homematic-ccu2 user.info kernel: [ 1378.007538] brcmfmac: power management disabled
Jul  8 22:29:24 homematic-ccu2 user.info kernel: [ 1378.007870] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jul  8 22:29:25 homematic-ccu2 user.notice rfkill: block set for id 0
Jul  8 22:30:07 homematic-ccu2 daemon.info cuxd[1514]: Received SIGTERM signal.
Jul  8 22:30:07 homematic-ccu2 daemon.info cuxd[1514]: CUx-Daemon stop(0)
Jul  8 22:30:07 homematic-ccu2 daemon.info cuxd[1514]: unlink(/var/cache/cuxd_proxy.ini)
Jul  8 22:30:07 homematic-ccu2 daemon.info cuxd[1514]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9920
Jul  8 22:30:07 homematic-ccu2 daemon.info cuxd[1514]: USB(1-1.5/ttyACM0) CUL868 disconnect
Jul  8 22:30:08 homematic-ccu2 user.info homematic: stopped cux-daemon
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: write_pid /var/run/cuxd.pid [1859]
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: CUx-Daemon(2.0.1) on CCU(2.35.16.20180708) start PID:1859
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9920 update(-1s):Sun Jul  8 22:30:07 2018
Jul  8 22:30:08 homematic-ccu2 user.info homematic: started cux-daemon
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: 8 device-paramset(s) loaded ok!
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: write_proxy /var/cache/cuxd_proxy.ini (1859 /usr/local/addons/cuxd/ 2.0.1 2.35.16.20180708 0)
Jul  8 22:30:08 homematic-ccu2 daemon.warn cuxd[1859]: init() '' not supported
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: USB(1-1.5/ttyACM0) CUL868 connect(9600:8N1)
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: Received SIGHUP signal.
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9920
Jul  8 22:30:08 homematic-ccu2 daemon.info cuxd[1859]: USB(1-1.5/ttyACM0) CUL868 disconnect
Jul  8 22:30:09 homematic-ccu2 user.info homematic: stopped cux-daemon
Jul  8 22:30:10 homematic-ccu2 daemon.info cuxd[1873]: write_pid /var/run/cuxd.pid [1873]
Jul  8 22:30:10 homematic-ccu2 daemon.info cuxd[1873]: CUx-Daemon(2.0.1) on CCU(2.35.16.20180708) start PID:1873
Jul  8 22:30:10 homematic-ccu2 daemon.info cuxd[1873]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:9920 update(-2s):Sun Jul  8 22:30:08 2018
Jul  8 22:30:10 homematic-ccu2 user.info homematic: started (restart) cux-daemon
Jul  8 22:30:10 homematic-ccu2 daemon.info cuxd[1873]: 8 device-paramset(s) loaded ok!
Jul  8 22:30:10 homematic-ccu2 daemon.info cuxd[1873]: write_proxy /var/cache/cuxd_proxy.ini (1873 /usr/local/addons/cuxd/ 2.0.1 2.35.16.20180708 0)
Jul  8 22:30:10 homematic-ccu2 daemon.warn cuxd[1873]: init() '' not supported
Jul  8 22:30:10 homematic-ccu2 daemon.info cuxd[1873]: USB(1-1.5/ttyACM0) CUL868 connect(9600:8N1)
Jul  8 22:39:40 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= MEQ0836058 [iseXmlRpc.cpp:2144]

Franzens

[Franzens]

Das Log ist von 23:10
Wenn du mir noch verrätst, wie ich am schnellsten sehe, welche Dienste auf der Shell,laufen liefere ich diese gerne auch.

Franzens

[alchy]

viewtopic.php?f=26&t=44283&p=442532#p442532

Wo fang ich da an.
Der CUxDaemon startet ca. 8 neu - das ist nicht normal und geht wahrscheinlich so weiter.

Da würde ich anfangen. CUxD passende Version runterladen und nochmal installieren.
Nach Neustart wieder warten und Log posten.
Wenn es nicht funzt, die letzten 20 Zeilen dieses Logs mal im CUxD Forum posten, Uwe wird sicherlich einen Rat wissen.


Eines deiner Scripte zu einer Energiemessdose hat ein Problem
Hast du ein Gateway ?

Alchy

[Franzens]

Der mehrfache restart des CuxD wurden wohl durch mich verursacht.
Ich hab auch die neueste Version nochmals installiert bevor ich mich ans Forum gewandt habe.

Nein ein Gateway habe ich nicht.


Edit: hab’s jetzt nochmal installiert alles durchgestartet. Scheint jetzt zu laufen.

Danke für das nächtliche Engagement

Franzens

[alchy]

Ich glaube ja nicht, das du CUxD am Ende deines Logs sekündlich neustartest.
Ich habe schon im Log gesehen das du die neueste Version von CUD verwendest, ich hatte dir ja geraten CUxD nochmals drüber zu installieren.


Die Ausgabe von ps und co, was ich oben verlinkt habe?

Ein

Code: Alles auswählen

ps -ef

sollte für den Anfang genügen.

Dazu wäre noch die Ausgabe von

Code: Alles auswählen

ls -l /etc/init.d/

interessant.

Nein ein Gateway habe ich nicht.

Kannst du dir dann einen Reim auf die Serial oder IP machen?

Code: Alles auswählen

Jul  8 22:06:51 homematic-ccu2 user.err setlgwkey: Could not find gateway by unicast with ip 192.168.178.85. Trying search by serial number.
Jul  8 22:06:59 homematic-ccu2 user.err setlgwkey: Could not find Lan Gateway using ip and serial number
Jul  8 22:06:59 homematic-ccu2 user.err setlgwkey: Cannot determine IP address of gateway with serial KEQ1065505

Alchy

[roe1974]

Mir ist noch etwas "kosmetisches" aufgefallen:

Im Firefox Browser wird oben links im aktivem Fenster das richtige neue HM Logo angezeigt.
Fügt man jedoch den Link zur "Lesezeichen-Symbolleiste" hinzu, erscheint der dort mit dem alten Logo. (Cache etc. geleert).

Siehe:

lg RIchard

[LibertyX]

Also bei mir passt alles, bist du beim löschen der Browserdaten auch auf "Erweitert" und hast "gesamte Zeit" ausgewählt?

Hier gibt es eine Anleitung, wie du nur den Favicon Cache löschen kannst
https://www.nullalo.com/en/how-to-delet ... con-cache/

[roe1974]

ich lösche hier -> "Daten entfernen" .... wo noch ?

PS: Ist Firefox Quantum 61.0.1