RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Einrichtung, Nutzung und Hilfe zu RaspberryMatic (OCCU auf Raspberry Pi)

Moderatoren: jmaus, Co-Administratoren

Gesperrt
tloeffel
Beiträge: 447
Registriert: 13.09.2017, 05:11
Hat sich bedankt: 1 Mal
Danksagung erhalten: 12 Mal

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von tloeffel » 03.08.2018, 22:49

Gluehwurm hat geschrieben: ↑
03.08.2018, 18:50
tloeffel hat geschrieben: ↑
03.08.2018, 13:43
... meinte Dein Betrag mein Problem? ...
Ja, natürlich, steht ja unter Deinem Beitrag bzw. auf der nächsten Seite.
Hi Gluehwurm,

danke für den Tipp. Ich habe es einmal von CCu2 auf Raspi gemacht. War zwei Tage voll dabei alle Variablen, Geräte und Programme neu anzulegen. Ich möchte das nicht wieder machen und vertraue derzeit auf die Kompatiblität von Jens's Arbeit.

Gruß Thomas
972 Kanäle in 165 Geräten: Davon 16 HM, 145 HMIP, 2 Gruppen und 2 CUXD Geräte
Nach oben
tloeffel
Beiträge: 447
Registriert: 13.09.2017, 05:11
Hat sich bedankt: 1 Mal
Danksagung erhalten: 12 Mal

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von tloeffel » 03.08.2018, 22:52

jmaus hat geschrieben: ↑
03.08.2018, 14:55
 Das ist kein wirklicher fehler und kann ignoriert werden. Oder seht ihr praktische Probleme dadurch?
Hi Jens,

danke für die schnelle Antwort. Ich weiß es nicht genau. Mein System bleibt wie beschrieben in den letzten Tagen zwischen 10 h und 36 h immer Stecken. Ich denke das liegt an dem "&" in Pocket Control. Habe wie gelesen es gelöscht und warte ob es hilft. Im Rahmen der Fehlersuche ist mir nur der benannte Fehler aufgefallen und wird wie Empfohlen ab jetzt ignoriert. Danke Dir.

Gruß Thomas
972 Kanäle in 165 Geräten: Davon 16 HM, 145 HMIP, 2 Gruppen und 2 CUXD Geräte
Nach oben
MathiasZ

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von MathiasZ » 04.08.2018, 03:41

Hi Jens,
ich habe heute Deine überarbeitete Anleitung zur Installation der Raspberrymatic gelesen.
Nicht nur Deine Raspberrymatic, sondern auch die Anleitung sind echt spitze!
Weiter so!

Bei mir läuft es ohne nennenswrte Fehler.
Nur das Update-Problem, wenn man über SSD/USB-Stick geht..........
Aber egal, ich habe gestern die industrielle micro-SD bekommen und warte brennend auf das nächste Update :D
Gruß,
Mathias
Nach oben
Benutzeravatar
AndiN
Beiträge: 2621
Registriert: 10.06.2015, 08:54
Wohnort: Hennef
Hat sich bedankt: 10 Mal
Danksagung erhalten: 28 Mal

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von AndiN » 04.08.2018, 15:37

Hallo zusammen,

da auch Positiv Feedbacks gewünscht sind: Installation heute Nacht vollzogen und noch keinerlei Probleme bei mir. Raspberry 3, altes Funkmodul und keinerlei IP Geräte. Nur falls es irgendwie eine Rolle spielt ;-)

Andi
Andi (Greenhorn)

Letzter Reboot: 17.03.24 => FW Update (Uptime:Rekord:153 Tage)
Systeminfos: Raspberry Pi3 Firmware: 3.75.6.20240316 142 Geräte
System angebunden: 3 Roomba 650 - Sprachausgabe via Home24 Media - Pocket Control - Zentrale: Asus TF103 mit Home24 Tablet
Addons: Drucken 2.5 - HQ WebUI 2.5.9 - XML-API 1.22 - CUx-Daemon 2.9.3 - E-Mail 1.7.4 - hm_pdetect 1.11 - VPN cloudmatic
Diverse Links
Nach oben
Kombjuder
Beiträge: 88
Registriert: 29.07.2015, 23:29
Wohnort: Weil am Rhein

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von Kombjuder » 04.08.2018, 15:42

Hallo,

ich habe jetzt über mehrere Tage versucht von OCCU (Raspi 3 mit HM-MOD-RPI-PCB) auf Raspberrymatic mit Raspberry Pi 3 B und RPI-RF-MOD umzustellen.
Ich habe ein Backup ohne Programme mit CUX-d erstellt und eingelesen. Raspberrymatik kam hoch, alle Geräte waren da.
Nur leider waren alle IP-Geräte (HMIP-PSM) nicht bedienbar und zeigten auch falsche Informationen an. Alle paar Minuten kam eine Fehlermeldung, dass HM-IP und noch ein Dienst nicht mehr funktioniert. Im weiteren stellte sich heraus, dass auch einige nicht IP-Geräte das selbe Bild boten. Zudem fehlten alle angelegten Diagramme.
Also alles überprüft, neue SD erstellt und wieder das Backup eingelesen, mit dem selben Ergebnis. Also Forum durchsucht. Nichts passendes gefunden.

Dann habe ich angefangen ältere Backups einzulesen, immer noch das selbe. Noch ältere und noch eins ...
Am 6. Janur bin ich dann fündig geworden. Obwohl ich keine Programme (CUX-d, XML-API und Email) gelöscht hatte wurde alles richtig eingelesen und bis jetzt ist alles bedienbar, auch die Diagramme sind da.


Einzig was auch weiterhin nicht 100% in Ordnung ist, sind die Anzeigen für den ausgewählten Raum. Es erscheinen des öfteren insbesondere die Rauchmelder des Raums vielfach. Nach erneutem Einlesen des Raums ist alles ok.
--------------------------------------------
220 Kanäle in 97 Geräten
--------------------------------------------
Nach oben
LibertyX
Beiträge: 767
Registriert: 10.11.2012, 19:47
System: Alternative CCU (auf Basis OCCU)
Wohnort: RP
Hat sich bedankt: 1 Mal
Danksagung erhalten: 19 Mal

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von LibertyX » 04.08.2018, 15:49

Wenn du HM-IP Geräte hast und das Funkmodul wechselt, führen alle HM-IP Geräte ein rekeying durch, sprich die fragen beim Server einen neuen Key an, dass kann eine ganze Weile dauern. Daher gab es schon bei vorherigen Versionen den Hinweis, nach einem Modul wechsel das System über Nacht laufen zu lassen.
RaspberryMatic (3.71.12.20231020) @RPI3 | 218 Kanäle in 53 Geräten und 72 CUxD-Kanäle in 8 CUxD-Geräten (2.11) | iobroker.pro - CCU-Historian (3.4.0)
Nach oben
Benutzeravatar
klana
Beiträge: 1080
Registriert: 08.02.2015, 08:37
System: Alternative CCU (auf Basis OCCU)
Hat sich bedankt: 54 Mal
Danksagung erhalten: 26 Mal

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von klana » 05.08.2018, 07:32

Guten Morgen Zusammen,

nachdem ich gestern wieder meinen StandardRaspi (PI 3B+ mit altem Funkmodul) in Betrieb genommen habe, kommt immer wieder der folgenden Logeintrag, den ich bisher nie hatte.

Code: Alles auswählen

Aug  4 22:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 23:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Ich habe kein WLAN am Raspi eingeschaltet, er hängt wie immer am LAN Kabel.
Wie bekomme ich das wieder weg bzw. warum mach er das?

Gruß
Klana

PS: Hier das ganze Log. Am Anfang ist noch eine andere Fehlermeldung recht häufig mit der ich auch nichts anfangen kann.

Aug 4 19:22:40 Homematic-Raspi daemon.err udhcpc[394]: sending discover

Code: Alles auswählen

Aug  4 19:22:31 localhost syslog.info syslogd started: BusyBox v1.28.4
Aug  4 19:22:31 localhost user.notice kernel: klogd started: BusyBox v1.28.4 (2018-07-15 17:12:18 CEST)
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000] Linux version 4.14.50 (damato@bilbo) (gcc version 6.4.0 (Buildroot 2018.05-01357-ge185fb8-dirty)) #1 SMP PREEMPT Sun Jul 15 17:33:16 CEST 2018
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] cma: Reserved 8 MiB at 0x3d800000
Aug  4 19:22:31 localhost user.debug kernel: [    0.000000] On node 0 totalpages: 253952
Aug  4 19:22:31 localhost user.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80c7e780, node_mem_map bcf3e000
Aug  4 19:22:31 localhost user.debug kernel: [    0.000000]   Normal zone: 2232 pages used for memmap
Aug  4 19:22:31 localhost user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Aug  4 19:22:31 localhost user.debug kernel: [    0.000000]   Normal zone: 253952 pages, LIFO batch:31
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] percpu: Embedded 17 pages/cpu @bcee7000 s39052 r8192 d22388 u69632
Aug  4 19:22:31 localhost user.debug kernel: [    0.000000] pcpu-alloc: s39052 r8192 d22388 u69632 alloc=17*4096
Aug  4 19:22:31 localhost user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 251720
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000] Kernel command line: dwc_otg.lpm_enable=0 sdhci_bcm2708.enable_llm=0 console=tty2 kgdboc=tty2 scandelay=5 root=PARTUUID=deedbeef-02 ro noswap rootfstype=ext4 elevator=deadline fsck.repair=yes lapic rootwait rootdelay=5 consoleblank=0 logo.nologo loglevel=0 quiet usb-storage.quirks=  8250.nr_uarts=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  empty
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] Memory: 984920K/1015808K available (7168K kernel code, 548K rwdata, 2052K rodata, 1024K init, 705K bss, 22696K reserved, 8192K cma-reserved)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000] Virtual kernel memory layout:
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]     vmalloc : 0xbe800000 - 0xff800000   (1040 MB)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]     lowmem  : 0x80000000 - 0xbe000000   ( 992 MB)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]       .text : 0x80008000 - 0x80800000   (8160 kB)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]       .init : 0x80b00000 - 0x80c00000   (1024 kB)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]       .data : 0x80c00000 - 0x80c89168   ( 549 kB)
Aug  4 19:22:31 localhost user.notice kernel: [    0.000000]        .bss : 0x80c910fc - 0x80d41824   ( 706 kB)
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] ftrace: allocating 24821 entries in 73 pages
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] 	Tasks RCU enabled.
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
Aug  4 19:22:31 localhost user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Aug  4 19:22:31 localhost user.info kernel: [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Aug  4 19:22:31 localhost user.info kernel: [    0.000018] Switching to timer-based delay loop, resolution 52ns
Aug  4 19:22:31 localhost user.info kernel: [    0.000279] Console: colour dummy device 80x30
Aug  4 19:22:31 localhost user.info kernel: [    0.000297] console [tty2] enabled
Aug  4 19:22:31 localhost user.info kernel: [    0.000323] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Aug  4 19:22:31 localhost user.info kernel: [    0.000340] pid_max: default: 32768 minimum: 301
Aug  4 19:22:31 localhost user.info kernel: [    0.000643] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.000658] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.001613] Disabling memory control group subsystem
Aug  4 19:22:31 localhost user.info kernel: [    0.001688] CPU: Testing write buffer coherency: ok
Aug  4 19:22:31 localhost user.info kernel: [    0.002114] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Aug  4 19:22:31 localhost user.info kernel: [    0.040053] Setting up static identity map for 0x100000 - 0x10003c
Aug  4 19:22:31 localhost user.info kernel: [    0.060043] Hierarchical SRCU implementation.
Aug  4 19:22:31 localhost user.info kernel: [    0.100116] smp: Bringing up secondary CPUs ...
Aug  4 19:22:31 localhost user.info kernel: [    0.170583] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Aug  4 19:22:31 localhost user.info kernel: [    0.240660] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Aug  4 19:22:31 localhost user.info kernel: [    0.310798] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Aug  4 19:22:31 localhost user.info kernel: [    0.310938] smp: Brought up 1 node, 4 CPUs
Aug  4 19:22:31 localhost user.info kernel: [    0.310950] SMP: Total of 4 processors activated (153.60 BogoMIPS).
Aug  4 19:22:31 localhost user.info kernel: [    0.310956] CPU: All CPU(s) started in HYP mode.
Aug  4 19:22:31 localhost user.info kernel: [    0.310962] CPU: Virtualization extensions available.
Aug  4 19:22:31 localhost user.info kernel: [    0.311750] devtmpfs: initialized
Aug  4 19:22:31 localhost user.notice kernel: [    0.322993] random: get_random_u32 called from bucket_table_alloc+0x100/0x254 with crng_init=0
Aug  4 19:22:31 localhost user.info kernel: [    0.324033] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
Aug  4 19:22:31 localhost user.info kernel: [    0.324282] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Aug  4 19:22:31 localhost user.info kernel: [    0.324300] futex hash table entries: 1024 (order: 4, 65536 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.324899] pinctrl core: initialized pinctrl subsystem
Aug  4 19:22:31 localhost user.info kernel: [    0.325739] NET: Registered protocol family 16
Aug  4 19:22:31 localhost user.info kernel: [    0.342692] DMA: preallocated 1024 KiB pool for atomic coherent allocations
Aug  4 19:22:31 localhost user.info kernel: [    0.348052] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Aug  4 19:22:31 localhost user.info kernel: [    0.348061] hw-breakpoint: maximum watchpoint size is 8 bytes.
Aug  4 19:22:31 localhost user.info kernel: [    0.350242] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
Aug  4 19:22:31 localhost user.info kernel: [    0.385135] bcm2835-dma 3f007000.dma: DMA legacy API manager at be813000, dmachans=0x1
Aug  4 19:22:31 localhost user.notice kernel: [    0.386658] SCSI subsystem initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.386899] usbcore: registered new interface driver usbfs
Aug  4 19:22:31 localhost user.info kernel: [    0.386954] usbcore: registered new interface driver hub
Aug  4 19:22:31 localhost user.info kernel: [    0.387050] usbcore: registered new device driver usb
Aug  4 19:22:31 localhost user.info kernel: [    0.390738] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-06-07 15:31
Aug  4 19:22:31 localhost user.info kernel: [    0.392476] clocksource: Switched to clocksource arch_sys_counter
Aug  4 19:22:31 localhost user.notice kernel: [    0.477198] VFS: Disk quotas dquot_6.6.0
Aug  4 19:22:31 localhost user.info kernel: [    0.477286] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug  4 19:22:31 localhost user.notice kernel: [    0.477515] FS-Cache: Loaded
Aug  4 19:22:31 localhost user.info kernel: [    0.477720] CacheFiles: Loaded
Aug  4 19:22:31 localhost user.info kernel: [    0.486554] NET: Registered protocol family 2
Aug  4 19:22:31 localhost user.info kernel: [    0.487310] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.487422] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.487609] TCP: Hash tables configured (established 8192 bind 8192)
Aug  4 19:22:31 localhost user.info kernel: [    0.487747] UDP hash table entries: 512 (order: 2, 16384 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.487792] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    0.488044] NET: Registered protocol family 1
Aug  4 19:22:31 localhost user.info kernel: [    0.488654] RPC: Registered named UNIX socket transport module.
Aug  4 19:22:31 localhost user.info kernel: [    0.488661] RPC: Registered udp transport module.
Aug  4 19:22:31 localhost user.info kernel: [    0.488667] RPC: Registered tcp transport module.
Aug  4 19:22:31 localhost user.info kernel: [    0.488673] RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug  4 19:22:31 localhost user.info kernel: [    0.490638] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
Aug  4 19:22:31 localhost user.info kernel: [    0.493885] workingset: timestamp_bits=14 max_order=18 bucket_order=4
Aug  4 19:22:31 localhost user.notice kernel: [    0.502270] FS-Cache: Netfs 'nfs' registered for caching
Aug  4 19:22:31 localhost user.notice kernel: [    0.502954] NFS: Registering the id_resolver key type
Aug  4 19:22:31 localhost user.notice kernel: [    0.502993] Key type id_resolver registered
Aug  4 19:22:31 localhost user.notice kernel: [    0.503000] Key type id_legacy registered
Aug  4 19:22:31 localhost user.info kernel: [    0.505100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Aug  4 19:22:31 localhost user.info kernel: [    0.505235] io scheduler noop registered
Aug  4 19:22:31 localhost user.info kernel: [    0.505243] io scheduler deadline registered (default)
Aug  4 19:22:31 localhost user.info kernel: [    0.505525] io scheduler cfq registered
Aug  4 19:22:31 localhost user.info kernel: [    0.505533] io scheduler mq-deadline registered
Aug  4 19:22:31 localhost user.info kernel: [    0.505540] io scheduler kyber registered
Aug  4 19:22:31 localhost user.info kernel: [    0.508746] BCM2708FB: allocated DMA memory fd910000
Aug  4 19:22:31 localhost user.info kernel: [    0.508777] BCM2708FB: allocated DMA channel 0 @ be813000
Aug  4 19:22:31 localhost user.info kernel: [    0.514148] Console: switching to colour frame buffer device 80x30
Aug  4 19:22:31 localhost user.info kernel: [    0.519517] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
Aug  4 19:22:31 localhost user.info kernel: [    0.521143] bcm2835-rng 3f104000.rng: hwrng registered
Aug  4 19:22:31 localhost user.info kernel: [    0.521300] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Aug  4 19:22:31 localhost user.info kernel: [    0.521792] vc-sm: Videocore shared memory driver
Aug  4 19:22:31 localhost user.info kernel: [    0.522102] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
Aug  4 19:22:31 localhost user.info kernel: [    0.532385] brd: module loaded
Aug  4 19:22:31 localhost user.info kernel: [    0.542175] loop: module loaded
Aug  4 19:22:31 localhost user.info kernel: [    0.542190] Loading iSCSI transport class v2.0-870.
Aug  4 19:22:31 localhost user.info kernel: [    0.543006] libphy: Fixed MDIO Bus: probed
Aug  4 19:22:31 localhost user.info kernel: [    0.543108] usbcore: registered new interface driver lan78xx
Aug  4 19:22:31 localhost user.info kernel: [    0.543173] usbcore: registered new interface driver smsc95xx
Aug  4 19:22:31 localhost user.info kernel: [    0.543191] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Aug  4 19:22:31 localhost user.warn kernel: [    0.743678] Core Release: 2.80a
Aug  4 19:22:31 localhost user.warn kernel: [    0.743688] Setting default values for core params
Aug  4 19:22:31 localhost user.warn kernel: [    0.743716] Finished setting default values for core params
Aug  4 19:22:31 localhost user.warn kernel: [    0.943970] Using Buffer DMA mode
Aug  4 19:22:31 localhost user.warn kernel: [    0.943977] Periodic Transfer Interrupt Enhancement - disabled
Aug  4 19:22:31 localhost user.warn kernel: [    0.943984] Multiprocessor Interrupt Enhancement - disabled
Aug  4 19:22:31 localhost user.warn kernel: [    0.943991] OTG VER PARAM: 0, OTG VER FLAG: 0
Aug  4 19:22:31 localhost user.warn kernel: [    0.944002] Dedicated Tx FIFOs mode
Aug  4 19:22:31 localhost user.warn kernel: [    0.944310] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbd904000 dma = 0xfd904000 len=9024
Aug  4 19:22:31 localhost user.warn kernel: [    0.944336] FIQ FSM acceleration enabled for :
Aug  4 19:22:31 localhost user.warn kernel: [    0.944336] Non-periodic Split Transactions
Aug  4 19:22:31 localhost user.warn kernel: [    0.944336] Periodic Split Transactions
Aug  4 19:22:31 localhost user.warn kernel: [    0.944336] High-Speed Isochronous Endpoints
Aug  4 19:22:31 localhost user.warn kernel: [    0.944336] Interrupt/Control Split Transaction hack enabled
Aug  4 19:22:31 localhost user.debug kernel: [    0.944344] dwc_otg: Microframe scheduler enabled
Aug  4 19:22:31 localhost user.warn kernel: [    0.944462] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805dbdec
Aug  4 19:22:31 localhost user.warn kernel: [    0.944474] WARN::hcd_init_fiq:460: FIQ ASM at 0x805dc144 length 36
Aug  4 19:22:31 localhost user.warn kernel: [    0.944488] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbe87e000
Aug  4 19:22:31 localhost user.info kernel: [    0.944551] dwc_otg 3f980000.usb: DWC OTG Controller
Aug  4 19:22:31 localhost user.info kernel: [    0.944583] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Aug  4 19:22:31 localhost user.info kernel: [    0.944618] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
Aug  4 19:22:31 localhost user.warn kernel: [    0.944664] Init: Port Power? op_state=1
Aug  4 19:22:31 localhost user.warn kernel: [    0.944671] Init: Power Port (0)
Aug  4 19:22:31 localhost user.info kernel: [    0.944933] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug  4 19:22:31 localhost user.info kernel: [    0.944945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug  4 19:22:31 localhost user.info kernel: [    0.944955] usb usb1: Product: DWC OTG Controller
Aug  4 19:22:31 localhost user.info kernel: [    0.944964] usb usb1: Manufacturer: Linux 4.14.50 dwc_otg_hcd
Aug  4 19:22:31 localhost user.info kernel: [    0.944973] usb usb1: SerialNumber: 3f980000.usb
Aug  4 19:22:31 localhost user.info kernel: [    0.945584] hub 1-0:1.0: USB hub found
Aug  4 19:22:31 localhost user.info kernel: [    0.945635] hub 1-0:1.0: 1 port detected
Aug  4 19:22:31 localhost user.debug kernel: [    0.946205] dwc_otg: FIQ enabled
Aug  4 19:22:31 localhost user.debug kernel: [    0.946211] dwc_otg: NAK holdoff enabled
Aug  4 19:22:31 localhost user.debug kernel: [    0.946218] dwc_otg: FIQ split-transaction FSM enabled
Aug  4 19:22:31 localhost user.debug kernel: [    0.946229] Module dwc_common_port init
Aug  4 19:22:31 localhost user.info kernel: [    0.946482] usbcore: registered new interface driver usb-storage
Aug  4 19:22:31 localhost user.info kernel: [    0.946659] mousedev: PS/2 mouse device common for all mice
Aug  4 19:22:31 localhost user.info kernel: [    0.946757] IR NEC protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.946764] IR RC5(x/sz) protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.946770] IR RC6 protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.946776] IR JVC protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.946782] IR Sony protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.946788] IR SANYO protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.946794] IR Sharp protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.946801] IR MCE Keyboard/mouse protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.946807] IR XMP protocol handler initialized
Aug  4 19:22:31 localhost user.info kernel: [    0.947718] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
Aug  4 19:22:31 localhost user.info kernel: [    0.947990] bcm2835-cpufreq: min=600000 max=1200000
Aug  4 19:22:31 localhost user.info kernel: [    0.948447] sdhci: Secure Digital Host Controller Interface driver
Aug  4 19:22:31 localhost user.info kernel: [    0.948453] sdhci: Copyright(c) Pierre Ossman
Aug  4 19:22:31 localhost user.info kernel: [    0.948829] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
Aug  4 19:22:31 localhost user.info kernel: [    0.949175] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
Aug  4 19:22:31 localhost user.info kernel: [    0.949288] sdhci-pltfm: SDHCI platform and OF driver helper
Aug  4 19:22:31 localhost user.info kernel: [    0.952322] ledtrig-cpu: registered to indicate activity on CPUs
Aug  4 19:22:31 localhost user.info kernel: [    0.952374] hidraw: raw HID events driver (C) Jiri Kosina
Aug  4 19:22:31 localhost user.info kernel: [    0.952451] usbcore: registered new interface driver usbhid
Aug  4 19:22:31 localhost user.info kernel: [    0.952495] usbhid: USB HID core driver
Aug  4 19:22:31 localhost user.info kernel: [    0.952913] vchiq: vchiq_init_state: slot_zero = bd980000, is_master = 0
Aug  4 19:22:31 localhost user.info kernel: [    0.954134] [vc_sm_connected_init]: start
Aug  4 19:22:31 localhost user.info kernel: [    0.962600] [vc_sm_connected_init]: end - returning 0
Aug  4 19:22:31 localhost user.info kernel: [    0.963017] ip_tables: (C) 2000-2006 Netfilter Core Team
Aug  4 19:22:31 localhost user.info kernel: [    0.963214] Initializing XFRM netlink socket
Aug  4 19:22:31 localhost user.info kernel: [    0.963232] NET: Registered protocol family 17
Aug  4 19:22:31 localhost user.notice kernel: [    0.963291] Key type dns_resolver registered
Aug  4 19:22:31 localhost user.notice kernel: [    0.963685] Registering SWP/SWPB emulation handler
Aug  4 19:22:31 localhost user.info kernel: [    0.964016] registered taskstats version 1
Aug  4 19:22:31 localhost user.info kernel: [    0.968569] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 166, base_baud = 31250000) is a 16550
Aug  4 19:22:31 localhost user.info kernel: [    0.969106] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
Aug  4 19:22:31 localhost user.info kernel: [    0.969111] mmc-bcm2835 3f300000.mmc: DMA channel allocated
Aug  4 19:22:31 localhost user.info kernel: [    1.023182] sdhost: log_buf @ bd907000 (fd907000)
Aug  4 19:22:31 localhost user.warn kernel: [    1.049156] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Aug  4 19:22:31 localhost user.warn kernel: [    1.050712] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Aug  4 19:22:31 localhost user.warn kernel: [    1.052220] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Aug  4 19:22:31 localhost user.warn kernel: [    1.054976] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Aug  4 19:22:31 localhost user.info kernel: [    1.102503] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Aug  4 19:22:31 localhost user.info kernel: [    1.103891] of_cfs_init
Aug  4 19:22:31 localhost user.info kernel: [    1.103992] of_cfs_init: OK
Aug  4 19:22:31 localhost user.info kernel: [    1.104711] Waiting 5 sec before mounting root device...
Aug  4 19:22:31 localhost user.notice kernel: [    1.127062] random: fast init done
Aug  4 19:22:31 localhost user.warn kernel: [    1.162594] Indeed it is in host mode hprt0 = 00021501
Aug  4 19:22:31 localhost user.info kernel: [    1.175521] mmc1: new high speed SDIO card at address 0001
Aug  4 19:22:31 localhost user.warn kernel: [    1.198160] mmc0: host does not support reading read-only switch, assuming write-enable
Aug  4 19:22:31 localhost user.info kernel: [    1.200718] mmc0: new high speed SDHC card at address 1234
Aug  4 19:22:31 localhost user.info kernel: [    1.200973] mmcblk0: mmc0:1234 SA08G 7.25 GiB
Aug  4 19:22:31 localhost user.info kernel: [    1.228176]  mmcblk0: p1 p2 p3
Aug  4 19:22:31 localhost user.info kernel: [    1.372519] usb 1-1: new high-speed USB device number 2 using dwc_otg
Aug  4 19:22:31 localhost user.warn kernel: [    1.372632] Indeed it is in host mode hprt0 = 00001101
Aug  4 19:22:31 localhost user.info kernel: [    1.612762] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Aug  4 19:22:31 localhost user.info kernel: [    1.612776] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug  4 19:22:31 localhost user.info kernel: [    1.613363] hub 1-1:1.0: USB hub found
Aug  4 19:22:31 localhost user.info kernel: [    1.613444] hub 1-1:1.0: 5 ports detected
Aug  4 19:22:31 localhost user.info kernel: [    1.932509] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Aug  4 19:22:31 localhost user.info kernel: [    2.062718] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Aug  4 19:22:31 localhost user.info kernel: [    2.062731] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug  4 19:22:31 localhost user.info kernel: [    2.065270] smsc95xx v1.0.6
Aug  4 19:22:31 localhost user.info kernel: [    2.155688] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:09:4e:2f
Aug  4 19:22:31 localhost user.info kernel: [    2.642509] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
Aug  4 19:22:31 localhost user.info kernel: [    2.773441] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5583
Aug  4 19:22:31 localhost user.info kernel: [    2.773454] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug  4 19:22:31 localhost user.info kernel: [    2.773464] usb 1-1.2: Product: Ultra Fit
Aug  4 19:22:31 localhost user.info kernel: [    2.773473] usb 1-1.2: Manufacturer: SanDisk
Aug  4 19:22:31 localhost user.info kernel: [    2.773482] usb 1-1.2: SerialNumber: 4C530001251027121091
Aug  4 19:22:31 localhost user.info kernel: [    2.774135] usb-storage 1-1.2:1.0: USB Mass Storage device detected
Aug  4 19:22:31 localhost user.info kernel: [    2.774650] scsi host0: usb-storage 1-1.2:1.0
Aug  4 19:22:31 localhost user.notice kernel: [    3.843514] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
Aug  4 19:22:31 localhost user.notice kernel: [    3.845008] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
Aug  4 19:22:31 localhost user.notice kernel: [    3.846377] sd 0:0:0:0: [sda] Write Protect is off
Aug  4 19:22:31 localhost user.debug kernel: [    3.846390] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
Aug  4 19:22:31 localhost user.notice kernel: [    3.846786] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug  4 19:22:31 localhost user.info kernel: [    3.855591]  sda: sda1
Aug  4 19:22:31 localhost user.notice kernel: [    3.857454] sd 0:0:0:0: [sda] Attached SCSI removable disk
Aug  4 19:22:31 localhost user.info kernel: [    6.175985] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Aug  4 19:22:31 localhost user.info kernel: [    6.176038] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Aug  4 19:22:31 localhost user.info kernel: [    6.184843] devtmpfs: mounted
Aug  4 19:22:31 localhost user.info kernel: [    6.188722] Freeing unused kernel memory: 1024K
Aug  4 19:22:31 localhost user.warn kernel: [    6.448582] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
Aug  4 19:22:31 localhost user.info kernel: [    6.466964] EXT4-fs (mmcblk0p3): mounted filesystem with journalled data mode. Opts: data=journal
Aug  4 19:22:31 localhost user.info kernel: [    6.652561] i2c /dev entries driver
Aug  4 19:22:31 localhost user.info kernel: [    6.697041] rtc-ds1307 1-006f: registered as rtc0
Aug  4 19:22:31 localhost user.info kernel: [    6.697119] i2c i2c-1: new_device: Instantiated device mcp7941x at 0x6f
Aug  4 19:22:31 localhost user.info kernel: [    7.030544] tun: Universal TUN/TAP device driver, 1.6
Aug  4 19:22:31 localhost daemon.info kernel: [    7.185508] udevd[202]: starting version 3.2.5
Aug  4 19:22:31 localhost user.notice kernel: [    7.191889] random: udevd: uninitialized urandom read (16 bytes read)
Aug  4 19:22:31 localhost user.notice kernel: [    7.194160] random: udevd: uninitialized urandom read (16 bytes read)
Aug  4 19:22:31 localhost user.notice kernel: [    7.194282] random: udevd: uninitialized urandom read (16 bytes read)
Aug  4 19:22:31 localhost daemon.info kernel: [    7.232682] udevd[206]: starting eudev-3.2.5
Aug  4 19:22:31 localhost user.warn kernel: [    7.330887] generic_raw_uart: loading out-of-tree module taints kernel.
Aug  4 19:22:31 localhost user.info kernel: [    7.334268] pl011_raw_uart 3f201000.serial: No reset pin configured in device tree
Aug  4 19:22:31 localhost user.info kernel: [    7.334370] pl011_raw_uart 3f201000.serial: Initialized pl011 device; mapbase=0x3f201000; irq=87; clockrate=47999625
Aug  4 19:22:31 localhost user.debug kernel: [    7.531410] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
Aug  4 19:22:31 localhost user.err kernel: [    7.531982] pinctrl-bcm2835 3f200000.gpio: pin gpio18 already requested by leds; cannot claim for 3f203000.i2s
Aug  4 19:22:31 localhost user.err kernel: [    7.532236] pinctrl-bcm2835 3f200000.gpio: pin-18 (3f203000.i2s) status -22
Aug  4 19:22:31 localhost user.err kernel: [    7.532373] pinctrl-bcm2835 3f200000.gpio: could not request pin 18 (gpio18) from group gpio18  on device pinctrl-bcm2835
Aug  4 19:22:31 localhost user.err kernel: [    7.532604] bcm2835-i2s 3f203000.i2s: Error applying setting, reverse things back
Aug  4 19:22:31 localhost user.warn kernel: [    7.532766] bcm2835-i2s: probe of 3f203000.i2s failed with error -22
Aug  4 19:22:31 localhost user.err kernel: [    7.537976] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
Aug  4 19:22:31 localhost user.info kernel: [    7.538369] usbcore: registered new interface driver brcmfmac
Aug  4 19:22:31 localhost user.info usbmount[227]: /dev/sda does not contain a filesystem or disklabel
Aug  4 19:22:31 localhost user.info usbmount[255]: executing command: mount -tvfat -onoexec,nodev,noatime,nodiratime /dev/sda1 /media/usb0
Aug  4 19:22:31 localhost user.warn kernel: [    7.698732] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  4 19:22:31 localhost user.info usbmount[255]: executing command: run-parts /etc/usbmount/mount.d
Aug  4 19:22:32 localhost user.err kernel: [    7.749964] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
Aug  4 19:22:32 localhost user.err kernel: [    7.750955] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
Aug  4 19:22:32 localhost user.notice kernel: [    7.763779] random: crng init done
Aug  4 19:22:32 localhost user.notice kernel: [    7.763795] random: 4 urandom warning(s) missed due to ratelimiting
Aug  4 19:22:36 localhost user.notice rfkill: block set for type bluetooth
Aug  4 19:22:37 localhost user.info kernel: [   12.784938] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Aug  4 19:22:37 localhost syslog.info syslogd exiting
Aug  4 19:22:37 Homematic-Raspi syslog.info syslogd started: BusyBox v1.28.4
Aug  4 19:22:37 Homematic-Raspi user.notice kernel: klogd started: BusyBox v1.28.4 (2018-07-15 17:12:18 CEST)
Aug  4 19:22:37 Homematic-Raspi daemon.err udhcpc[394]: started, v1.28.4
Aug  4 19:22:37 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:22:38 Homematic-Raspi user.info kernel: [   14.293760] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC7E1
Aug  4 19:22:40 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:22:43 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:22:46 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:22:49 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:22:53 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:22:55 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:22:59 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:02 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:05 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:08 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:11 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:14 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:17 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:21 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:24 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:26 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:29 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:32 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:35 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:38 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:41 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:44 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:47 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:51 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:54 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:56 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:23:59 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:02 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:05 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:08 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:11 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:14 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:17 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:21 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:24 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:26 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:29 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:32 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:35 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:38 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:41 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:44 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:47 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:50 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:53 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:56 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:24:59 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:03 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:06 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:09 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:12 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:15 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:18 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:21 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:24 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:27 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:30 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:33 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:36 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:39 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:43 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:46 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:49 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:53 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:55 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:25:58 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:01 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:04 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:07 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:10 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:13 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:16 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:19 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:23 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:25 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:28 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:31 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:34 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:37 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:40 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:43 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:46 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:49 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:53 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:55 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:26:58 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:01 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:04 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:08 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:11 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:14 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:17 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:21 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:24 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:26 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:29 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:32 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:35 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:38 Homematic-Raspi daemon.err udhcpc[394]: sending discover
Aug  4 19:27:41 Homematic-Raspi daemon.err udhcpc[394]: no lease, forking to background
Aug  4 19:27:41 Homematic-Raspi user.info kernel: [  317.593758] NET: Registered protocol family 10
Aug  4 19:27:41 Homematic-Raspi user.info kernel: [  317.596102] Segment Routing with IPv6
Aug  4 19:27:41 Homematic-Raspi user.info kernel: [  317.604745] ip6_tables: (C) 2000-2006 Netfilter Core Team
Aug  4 19:27:42 Homematic-Raspi user.info firewall: configuration set
Aug  4 19:27:42 Homematic-Raspi user.info kernel: [  317.865531] brcmfmac: power management disabled
Aug  4 19:27:42 Homematic-Raspi user.info kernel: [  317.867193] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug  4 19:27:47 Homematic-Raspi user.notice rfkill: unblock set for type wlan
Aug  4 19:27:47 Homematic-Raspi daemon.notice wpa_supplicant[450]: Successfully initialized wpa_supplicant
Aug  4 19:27:47 Homematic-Raspi syslog.info syslogd exiting
Aug  4 19:27:47 Homematic-Raspi syslog.info syslogd started: BusyBox v1.28.4
Aug  4 19:27:47 Homematic-Raspi user.notice kernel: klogd started: BusyBox v1.28.4 (2018-07-15 17:12:18 CEST)
Aug  4 19:27:47 Homematic-Raspi daemon.err udhcpc[414]: received SIGTERM
Aug  4 19:27:47 Homematic-Raspi daemon.err udhcpc[471]: started, v1.28.4
Aug  4 19:27:47 Homematic-Raspi daemon.err udhcpc[471]: sending discover
Aug  4 19:27:47 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2462 MHz)
Aug  4 19:27:48 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: Associated with 34:31:c4:71:8f:68
Aug  4 19:27:48 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Key negotiation completed with 34:31:c4:71:8f:68 [PTK=CCMP GTK=CCMP]
Aug  4 19:27:48 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: CTRL-EVENT-CONNECTED - Connection to 34:31:c4:71:8f:68 completed [id=0 id_str=]
Aug  4 19:27:48 Homematic-Raspi user.info kernel: [  323.864172] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Aug  4 19:27:51 Homematic-Raspi daemon.err udhcpc[471]: sending discover
Aug  4 19:27:51 Homematic-Raspi daemon.err udhcpc[471]: sending select for 192.168.178.37
Aug  4 19:27:51 Homematic-Raspi daemon.err udhcpc[471]: lease of 192.168.178.37 obtained, lease time 864000
Aug  4 19:27:51 Homematic-Raspi user.info firewall: configuration set
Aug  4 19:27:51 Homematic-Raspi daemon.info ifplugd(wlan0)[522]: ifplugd 0.28 initializing, using NETLINK device monitoring.
Aug  4 19:27:51 Homematic-Raspi daemon.info ifplugd(wlan0)[522]: Using interface wlan0/B8:27:EB:5C:1B:7A with driver <brcmfmac> (version: 7.45.98.38)
Aug  4 19:27:51 Homematic-Raspi daemon.info ifplugd(wlan0)[522]: Using detection mode: wireless extension
Aug  4 19:27:51 Homematic-Raspi daemon.info ifplugd(wlan0)[522]: Initialization complete, link beat detected, interface enabled.
Aug  4 19:27:51 Homematic-Raspi daemon.info ifplugd(wlan0)[522]: Executing '/etc/ifplugd/ifplugd.action wlan0 up'.
Aug  4 19:27:51 Homematic-Raspi daemon.warn ifplugd(wlan0)[522]: client: ifup: interface wlan0 already configured
Aug  4 19:27:52 Homematic-Raspi daemon.info ifplugd(wlan0)[522]: Program executed successfully.
Aug  4 19:27:52 Homematic-Raspi daemon.info ifplugd(eth0)[527]: ifplugd 0.28 initializing.
Aug  4 19:27:52 Homematic-Raspi daemon.info ifplugd(eth0)[527]: Using interface eth0/B8:27:EB:09:4E:2F with driver <smsc95xx> (version: 22-Aug-2005)
Aug  4 19:27:52 Homematic-Raspi daemon.info ifplugd(eth0)[527]: Using detection mode: SIOCETHTOOL
Aug  4 19:27:52 Homematic-Raspi daemon.info ifplugd(eth0)[527]: Initialization complete, link beat detected.
Aug  4 19:27:52 Homematic-Raspi daemon.info ifplugd(eth0)[527]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Aug  4 19:27:52 Homematic-Raspi daemon.warn ifplugd(eth0)[527]: client: ifup: interface eth0 already configured
Aug  4 19:27:52 Homematic-Raspi daemon.info ifplugd(eth0)[527]: Program executed successfully.
Aug  4 19:27:58 Homematic-Raspi daemon.notice ntpdate[531]: step time server 81.14.202.21 offset 0.589000 sec
Aug  4 19:27:58 Homematic-Raspi daemon.notice ntpd[535]: ntpd 4.2.8p11@1.3728-o Sun Jul 15 15:24:41 UTC 2018 (1): Starting
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[535]: Command line: /usr/sbin/ntpd -g ntp.homematic.com
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: proto: precision = 0.989 usec (-20)
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: Listen and drop on 0 v6wildcard [::]:123
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: Listen normally on 2 lo 127.0.0.1:123
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: Listen normally on 3 wlan0 192.168.178.37:123
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: Listen normally on 4 lo [::1]:123
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: Listen normally on 5 eth0 [fe80::ba27:ebff:fe09:4e2f%2]:123
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: Listen normally on 6 wlan0 [fe80::ba27:ebff:fe5c:1b7a%3]:123
Aug  4 19:27:58 Homematic-Raspi daemon.info ntpd[537]: Listening on routing socket on fd #23 for interface updates
Aug  4 19:27:58 Homematic-Raspi daemon.err xinetd[557]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
Aug  4 19:27:58 Homematic-Raspi daemon.crit xinetd[557]: 557 {init_services} no services. Exiting...
Aug  4 19:27:59 Homematic-Raspi auth.info sshd[580]: Server listening on 0.0.0.0 port 22.
Aug  4 19:27:59 Homematic-Raspi auth.info sshd[580]: Server listening on :: port 22.
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: write_pid /var/run/cuxd.pid [628]
Aug  4 19:27:59 Homematic-Raspi user.info homematic: started cux-daemon
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: CUx-Daemon(2.0.1) on CCU(2.35.16.20180715) start PID:628
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:1003 update(-364s):Sat Aug  4 19:21:55 2018
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: 2 device-paramset(s) loaded ok!
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: write_proxy /var/cache/cuxd_proxy.ini (628 /usr/local/addons/cuxd/ 2.0.1 2.35.16.20180715 0)
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: add interface 'CUxD'
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: write interface(1) 'BidCos-RF' to /usr/local/etc/config/InterfacesList.xml
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: write interface(2) 'VirtualDevices' to /usr/local/etc/config/InterfacesList.xml
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: write interface(3) 'HmIP-RF' to /usr/local/etc/config/InterfacesList.xml
Aug  4 19:27:59 Homematic-Raspi daemon.info cuxd[628]: write interface(4) 'CUxD' to /usr/local/etc/config/InterfacesList.xml
Aug  4 19:27:59 Homematic-Raspi user.info root: Updating RF Lan Gateway Coprocessor Firmware
Aug  4 19:27:59 Homematic-Raspi user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Aug  4 19:27:59 Homematic-Raspi user.info root: Updating RF Lan Gateway Firmware
Aug  4 19:27:59 Homematic-Raspi user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Aug  4 19:27:59 Homematic-Raspi user.info root: Updating Wired Lan Gateway Firmware
Aug  4 19:27:59 Homematic-Raspi user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Aug  4 19:27:59 Homematic-Raspi daemon.info snmpd[664]: Created directory: /var/lib/snmp
Aug  4 19:27:59 Homematic-Raspi daemon.info snmpd[664]: Created directory: /var/lib/snmp/cert_indexes
Aug  4 19:27:59 Homematic-Raspi daemon.info snmpd[664]: Created directory: /var/lib/snmp/mib_indexes
Aug  4 19:27:59 Homematic-Raspi daemon.info snmpd[664]: Turning on AgentX master support.
Aug  4 19:27:59 Homematic-Raspi daemon.info snmpd[666]: NET-SNMP version 5.7.3
Aug  4 19:27:59 Homematic-Raspi user.info kernel: [  334.900331] eq3loop: created slave mmd_hmip
Aug  4 19:27:59 Homematic-Raspi user.info kernel: [  334.900711] eq3loop: created slave mmd_bidcos
Aug  4 19:28:01 Homematic-Raspi user.info kernel: [  337.068469] eq3loop: eq3loop_open_slave() mmd_bidcos
Aug  4 19:28:16 Homematic-Raspi user.info kernel: [  351.500151] eq3loop: eq3loop_open_slave() mmd_hmip
Aug  4 19:28:16 Homematic-Raspi user.info kernel: [  351.500313] eq3loop: eq3loop_close_slave() mmd_hmip
Aug  4 19:28:16 Homematic-Raspi user.info kernel: [  351.503717] eq3loop: eq3loop_open_slave() mmd_hmip
Aug  4 19:28:16 Homematic-Raspi user.info kernel: [  351.503839] eq3loop: eq3loop_close_slave() mmd_hmip
Aug  4 19:28:16 Homematic-Raspi user.info kernel: [  351.513458] eq3loop: eq3loop_open_slave() mmd_hmip
Aug  4 19:28:20 Homematic-Raspi daemon.warn cuxd[628]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Aug  4 19:28:23 Homematic-Raspi daemon.warn cuxd[628]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Aug  4 19:28:26 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:26 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:27 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:27 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:27 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:27 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:28 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:28 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:28 Homematic-Raspi user.info homematic: meine-homematic.de loophammer startet openvpn.
Aug  4 19:28:28 Homematic-Raspi daemon.warn openvpn[893]: WARNING: file '/usr/local/etc/config/addons/mh/client.key' is group or others accessible
Aug  4 19:28:28 Homematic-Raspi daemon.warn openvpn[894]: WARNING: --ns-cert-type is DEPRECATED.  Use --remote-cert-tls instead.
Aug  4 19:28:28 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug  4 19:28:31 Homematic-Raspi daemon.err ifplugd(wlan0)[522]: NLAPI: Packet too small or truncated!
Aug  4 19:28:31 Homematic-Raspi daemon.info ifplugd(wlan0)[522]: Exiting.
Aug  4 19:28:31 Homematic-Raspi daemon.notice openvpn[894]: do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Aug  4 19:28:31 Homematic-Raspi daemon.warn openvpn[894]: ERROR: Linux route add command failed: external program exited with error status: 2
Aug  4 19:28:31 Homematic-Raspi daemon.warn openvpn[894]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Aug  4 19:28:32 Homematic-Raspi daemon.info ntpd[537]: Listen normally on 7 tun0 10.220.59.92:123
Aug  4 19:28:32 Homematic-Raspi daemon.info ntpd[537]: Listen normally on 8 tun0 [fe80::44a6:378:d425:4b1d%4]:123
Aug  4 19:28:45 Homematic-Raspi user.err rfd: HSSParameter::GetValue() id=LUX failed getting physical value.
Aug  4 19:28:45 Homematic-Raspi local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"NEQ1357311:1","LUX"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Aug  4 19:28:45 Homematic-Raspi local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Aug  4 19:28:45 Homematic-Raspi local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Aug  4 19:28:53 Homematic-Raspi daemon.info cuxd[628]: INIT 'xmlrpc_bin://127.0.0.1:1999' '1238'
Aug  4 19:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 19:32:45 Homematic-Raspi user.debug script: [Wochentag und Wochenende setzen]
Aug  4 19:33:06 Homematic-Raspi user.debug script: [Rolladen auf AUTO gesetzt. ]
Aug  4 19:33:16 Homematic-Raspi user.debug script: [LED16 per Hand resettet]
Aug  4 19:33:22 Homematic-Raspi user.debug script: [LED16 Init mittels Taste. ]
Aug  4 19:33:25 Homematic-Raspi user.debug script: [Anwesenheit_NEU auf TRUE setzen bei Reboot]
Aug  4 19:33:25 Homematic-Raspi user.debug script: [AnwSimu_OnOff auf FALSE setzen bei Reboot]
Aug  4 19:33:36 Homematic-Raspi user.debug script: [Astrozeit Offsets für Sonnenauf und- Untergang gesetzt ]
Aug  4 19:33:45 Homematic-Raspi user.debug script: [Heizung auf Sommerbetrieb stellen bei Reboot]
Aug  4 19:34:05 Homematic-Raspi user.debug script: [Timer-Allgemeines ausführen bei Reboot]
Aug  4 19:34:05 Homematic-Raspi user.debug script: [REBOOT ABGESCHLOSSEN]
Aug  4 19:34:06 Homematic-Raspi user.debug script: [Setzen der Astrotimer inklusive Offset]
Aug  4 19:34:07 Homematic-Raspi user.debug script: [Feiertage feststellen]
Aug  4 19:34:07 Homematic-Raspi user.debug script: [Heizung auf Sommer umgestellt. ]
Aug  4 19:34:08 Homematic-Raspi user.debug script: [Urlaubstage feststellen]
Aug  4 19:34:10 Homematic-Raspi user.debug script: [Batteriespannungen auslesen]
Aug  4 19:34:30 Homematic-Raspi user.debug script: [Mondphase berechnen]
Aug  4 19:34:45 Homematic-Raspi user.debug script: [Wochentag und Wochenende setzen]
Aug  4 19:35:05 Homematic-Raspi user.debug script: [Senden des Systemlogs per EMail]
Aug  4 19:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 19:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 20:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 20:01:50 Homematic-Raspi local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= OEQ0305390 [iseXmlRpc.cpp:2144]
Aug  4 20:03:08 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 15 von Status : 0 auf Status : 2.000000]
Aug  4 20:03:08 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 15 von Status : 0 auf Status : 2.000000]
Aug  4 20:03:16 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 15 von Status : 2 auf Status : 3.000000]
Aug  4 20:03:17 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 15 von Status : 2 auf Status : 3.000000]
Aug  4 20:03:49 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 14 von Status : 0 auf Status : 2.000000]
Aug  4 20:03:50 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 14 von Status : 0 auf Status : 2.000000]
Aug  4 20:04:37 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 14 von Status : 2 auf Status : 3.000000]
Aug  4 20:04:37 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 14 von Status : 2 auf Status : 3.000000]
Aug  4 20:07:16 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  4 20:07:16 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  4 20:07:57 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  4 20:07:57 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  4 20:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 20:14:03 Homematic-Raspi local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: ^M {^M   if( system.IsVar("id") )^M   {^M     object to = dom.GetObject( system.GetVar("id") );^M     if( to )^M     {^M       if( to.IsTypeOf( OT_VARDP ) || to.IsTypeOf( OT_ALARMDP ) )^M       {^M         integer itoVT = to.ValueType();^M         integer itoST = to.ValueSubType();^M         boolean btoLogic  = ( (itoVT==ivtBinary)  && (itoST==istBool)    );^M         boolean btoList   = ( (itoVT==ivtInteger) && (itoST=
istEnum)    );^M         boolean btoNumber = ( (itoVT==ivtFloat)   && (itoST==istGeneric) );^M         boolean btoAlarm  = ( (itoVT==ivtBinary)  && (itoST==istAlarm)   );^M         boolean btoString  = ( (itoVT==ivtString)  && (itoST==istChar8859));^M         if( btoLogic || btoAlarm )^M         {^M           if ( (sValue == "0") || (sValue == "") )^M           {^M             sRet=sRet#to.ValueName0();^M           }^M           else^M           {^M             sRet=sRet#to.ValueName1();^M           }^M  
      }^M         if( btoList ) ^M         { ^M     
Aug  4 20:14:03 Homematic-Raspi local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: ^M {^M   if( system.IsVar("id") )^M   {^M     object to = dom.GetObject( system.GetVar("id") );^M     if( to )^M     {^M       if( to.IsTypeOf( OT_VARDP ) || to.IsTypeOf( OT_ALARMDP ) )^M       {^M         integer itoVT = to.ValueType();^M         integer itoST = to.ValueSubType();^M         boolean btoLogic  = ( (itoVT==ivtBinary)  && (itoST==istBool)    );^M         boolean btoList   = ( (itoVT==ivtInteger) && (itoST=
istEnum)    );^M         boolean btoNumber = ( (itoVT==ivtFloat)   && (itoST==istGeneric) );^M         boolean btoAlarm  = ( (itoVT==ivtBinary)  && (itoST==istAlarm)   );^M         boolean btoString  = ( (itoVT==ivtString)  && (itoST==istChar8859));^M         if( btoLogic || btoAlarm )^M         {^M           if ( (sValue == "0") || (sValue == "") )^M           {^M             sRet=sRet#to.ValueName0();^M           }^M           else^M           {^M             sRet=sRet#to.ValueName1();^M           }^M  
      }^M         if( btoList ) ^M         { ^M     
Aug  4 20:14:03 Homematic-Raspi local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: ^M {^M   if( system.IsVar("id") )^M   {^M     object to = dom.GetObject( system.GetVar("id") );^M     if( to )^M     {^M       if( to.IsTypeOf( OT_VARDP ) || to.IsTypeOf( OT_ALARMDP ) )^M       {^M         integer itoVT = to.ValueType();^M         integer itoST = to.ValueSubType();^M         boolean btoLogic  = ( (itoVT==ivtBinary)  && (itoST==istBool)    );^M         boolean btoList   = ( (itoVT==ivtInteger) && (itoST=
istEnum)    );^M         boolean btoNumber = ( (itoVT==ivtFloat)   && (itoST==istGeneric) );^M         boolean btoAlarm  = ( (itoVT==ivtBinary)  && (itoST==istAlarm)   );^M         boolean btoString  = ( (itoVT==ivtString)  && (itoST==istChar8859));^M         if( btoLogic || btoAlarm )^M         {^M           if ( (sValue == "0") || (sValue == "") )^M           {^M             sRet=sRet#to.ValueName0();^M           }^M           else^M           {^M             sRet=sRet#to.ValueName1();^M           }^M  
      }^M         if( btoList ) ^M         { ^M     
Aug  4 20:14:03 Homematic-Raspi local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: ^M {^M   if( system.IsVar("id") )^M   {^M     object to = dom.GetObject( system.GetVar("id") );^M     if( to )^M     {^M       if( to.IsTypeOf( OT_VARDP ) || to.IsTypeOf( OT_ALARMDP ) )^M       {^M         integer itoVT = to.ValueType();^M         integer itoST = to.ValueSubType();^M         boolean btoLogic  = ( (itoVT==ivtBinary)  && (itoST==istBool)    );^M         boolean btoList   = ( (itoVT==ivtInteger) && (itoST=
istEnum)    );^M         boolean btoNumber = ( (itoVT==ivtFloat)   && (itoST==istGeneric) );^M         boolean btoAlarm  = ( (itoVT==ivtBinary)  && (itoST==istAlarm)   );^M         boolean btoString  = ( (itoVT==ivtString)  && (itoST==istChar8859));^M         if( btoLogic || btoAlarm )^M         {^M           if ( (sValue == "0") || (sValue == "") )^M           {^M             sRet=sRet#to.ValueName0();^M           }^M           else^M           {^M             sRet=sRet#to.ValueName1();^M           }^M  
      }^M         if( btoList ) ^M         { ^M     
Aug  4 20:19:50 Homematic-Raspi local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= OEQ0305390 [iseXmlRpc.cpp:2144]
Aug  4 20:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 20:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 20:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 20:48:43 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 15 von Status : 3 auf Status : 1.000000]
Aug  4 20:48:43 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 15 von Status : 3 auf Status : 1.000000]
Aug  4 20:48:48 Homematic-Raspi user.debug script: [Trockner ist fertig.]
Aug  4 20:49:59 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 15 von Status : 1 auf Status : 0.000000]
Aug  4 20:49:59 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 15 von Status : 1 auf Status : 0.000000]
Aug  4 20:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 21:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 21:03:29 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  4 21:03:30 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  4 21:09:47 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  4 21:09:47 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  4 21:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 21:10:18 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 9 von Status : 2 auf Status : 1.000000]
Aug  4 21:10:18 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 9 von Status : 2 auf Status : 1.000000]
Aug  4 21:11:00 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 7 von Status : 2 auf Status : 1.000000]
Aug  4 21:11:00 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 7 von Status : 2 auf Status : 1.000000]
Aug  4 21:18:02 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 14 von Status : 3 auf Status : 1.000000]
Aug  4 21:18:02 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 14 von Status : 3 auf Status : 1.000000]
Aug  4 21:18:07 Homematic-Raspi user.debug script: [Waschmaschine ist fertig.]
Aug  4 21:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 21:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 21:32:05 Homematic-Raspi user.debug script: [Rolladentest Sonnenstandsberechnung - Runterfahren 1]
Aug  4 21:39:27 Homematic-Raspi user.debug script: [Rolladen auf LUEFTEN gefahren.]
Aug  4 21:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 21:41:30 Homematic-Raspi local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= OEQ0305390 [iseXmlRpc.cpp:2144]
Aug  4 21:42:33 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 14 von Status : 1 auf Status : 0.000000]
Aug  4 21:42:33 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 14 von Status : 1 auf Status : 0.000000]
Aug  4 21:47:17 Homematic-Raspi user.debug script: [Haustuerlicht eingeschaltet.]
Aug  4 21:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 21:50:25 Homematic-Raspi user.debug script: [Rolladentest Sonnenstandsberechnung - Runterfahren 1]
Aug  4 21:52:34 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 3 von Status : 2 auf Status : 1.000000]
Aug  4 21:52:35 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 3 von Status : 2 auf Status : 1.000000]
Aug  4 21:52:51 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 1 von Status : 2 auf Status : 1.000000]
Aug  4 21:52:51 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 1 von Status : 2 auf Status : 1.000000]
Aug  4 21:53:43 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  4 21:53:43 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  4 21:56:44 Homematic-Raspi user.debug script: [Rolladen auf LUEFTEN gefahren.]
Aug  4 22:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:01:34 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 5 von Status : 2 auf Status : 1.000000]
Aug  4 22:01:34 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 5 von Status : 2 auf Status : 1.000000]
Aug  4 22:01:52 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 4 von Status : 2 auf Status : 1.000000]
Aug  4 22:01:52 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 4 von Status : 2 auf Status : 1.000000]
Aug  4 22:03:04 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 8 von Status : 2 auf Status : 1.000000]
Aug  4 22:03:05 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 8 von Status : 2 auf Status : 1.000000]
Aug  4 22:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 22:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 23:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 23:01:21 Homematic-Raspi user.debug script: [Rolladen Buero Mitte nicht gefahren, da AUTO=OFF.]
Aug  4 23:09:39 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 1 von Status : 1 auf Status : 2.000000]
Aug  4 23:09:39 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 1 von Status : 1 auf Status : 2.000000]
Aug  4 23:10:03 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  4 23:10:04 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  4 23:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 23:11:45 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 3 von Status : 1 auf Status : 2.000000]
Aug  4 23:11:46 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 3 von Status : 1 auf Status : 2.000000]
Aug  4 23:12:56 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 7 von Status : 1 auf Status : 2.000000]
Aug  4 23:12:57 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 7 von Status : 1 auf Status : 2.000000]
Aug  4 23:13:27 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 8 von Status : 1 auf Status : 2.000000]
Aug  4 23:13:27 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 8 von Status : 1 auf Status : 2.000000]
Aug  4 23:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 23:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 23:37:12 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 5 von Status : 1 auf Status : 2.000000]
Aug  4 23:37:12 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 5 von Status : 1 auf Status : 2.000000]
Aug  4 23:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  4 23:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 00:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 00:10:01 Homematic-Raspi user.debug script: [Setzen der Astrotimer inklusive Offset]
Aug  5 00:10:02 Homematic-Raspi user.debug script: [Feiertage feststellen]
Aug  5 00:10:03 Homematic-Raspi user.debug script: [Urlaubstage feststellen]
Aug  5 00:10:05 Homematic-Raspi user.debug script: [Batteriespannungen auslesen]
Aug  5 00:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 00:10:25 Homematic-Raspi user.debug script: [Mondphase berechnen]
Aug  5 00:10:40 Homematic-Raspi user.debug script: [Wochentag und Wochenende setzen]
Aug  5 00:11:00 Homematic-Raspi user.debug script: [Senden des Systemlogs per EMail]
Aug  5 00:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 00:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 00:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 00:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 01:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 01:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 01:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 01:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 01:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 01:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 02:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 02:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 02:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 02:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 02:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 02:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 03:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 03:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 03:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 03:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 03:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 03:48:37 Homematic-Raspi daemon.warn openvpn[894]: WARNING: --ns-cert-type is DEPRECATED.  Use --remote-cert-tls instead.
Aug  5 03:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 04:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 04:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 04:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 04:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 04:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 04:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 05:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 05:10:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 05:20:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 05:30:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 05:38:48 Homematic-Raspi user.debug script: [Haustuerlicht ausgeschaltet.]
Aug  5 05:40:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 05:50:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 06:00:06 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 06:10:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 06:20:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 06:27:36 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 5 von Status : 2 auf Status : 1.000000]
Aug  5 06:27:36 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 5 von Status : 2 auf Status : 1.000000]
Aug  5 06:27:59 Homematic-Raspi daemon.info cuxd[628]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:994
Aug  5 06:28:21 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 6 von Status : 2 auf Status : 1.000000]
Aug  5 06:28:21 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 6 von Status : 2 auf Status : 1.000000]
Aug  5 06:28:41 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 3 von Status : 2 auf Status : 1.000000]
Aug  5 06:28:41 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 3 von Status : 2 auf Status : 1.000000]
Aug  5 06:29:13 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 8 von Status : 2 auf Status : 1.000000]
Aug  5 06:29:13 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 8 von Status : 2 auf Status : 1.000000]
Aug  5 06:29:57 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 7 von Status : 2 auf Status : 1.000000]
Aug  5 06:29:58 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 7 von Status : 2 auf Status : 1.000000]
Aug  5 06:30:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 06:31:12 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 1 von Status : 2 auf Status : 1.000000]
Aug  5 06:31:12 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 1 von Status : 2 auf Status : 1.000000]
Aug  5 06:32:29 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  5 06:32:29 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  5 06:40:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 06:50:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 07:00:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 07:08:14 Homematic-Raspi user.debug script: [Rolladentest Sonnenstandsberechnung - Hochfahren 2]
Aug  5 07:10:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 07:10:59 Homematic-Raspi user.debug script: [Rolladen Buero Mitte nicht gefahren, da AUTO=OFF.]
Aug  5 07:20:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 07:23:00 Homematic-Raspi user.debug script: [Rolladentest Sonnenstandsberechnung - Hochfahren 2]
Aug  5 07:24:47 Homematic-Raspi user.debug script: [Rolladen Buero Mitte nicht gefahren, da AUTO=OFF.]
Aug  5 07:30:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 07:34:59 Homematic-Raspi user.debug script: [Rolladen Buero Mitte nicht gefahren, da AUTO=OFF.]
Aug  5 07:40:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 07:44:08 Homematic-Raspi user.debug script: [Roll_Hoehe hat sich geändert!]
Aug  5 07:50:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 07:52:05 Homematic-Raspi user.debug script: [Rolladen auf LUEFTEN gefahren]
Aug  5 08:00:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 08:01:21 Homematic-Raspi user.debug script: [Rolladen Buero Mitte nicht gefahren, da AUTO=OFF.]
Aug  5 08:10:01 Homematic-Raspi user.debug script: [Nur noch 29 Tage bis zum Urlaub]
Aug  5 08:10:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 08:20:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 08:30:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 08:36:25 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 3 von Status : 1 auf Status : 2.000000]
Aug  5 08:36:25 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 3 von Status : 1 auf Status : 2.000000]
Aug  5 08:40:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 08:50:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 08:59:07 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 1 von Status : 1 auf Status : 2.000000]
Aug  5 08:59:08 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 1 von Status : 1 auf Status : 2.000000]
Aug  5 09:00:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 09:10:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 09:15:30 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  5 09:15:30 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  5 09:15:35 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  5 09:15:36 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 2 auf Status : 1.000000]
Aug  5 09:20:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 09:30:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 09:40:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 09:50:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 10:00:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 10:10:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 10:20:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 10:30:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 10:40:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 10:45:18 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 7 von Status : 1 auf Status : 2.000000]
Aug  5 10:45:19 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 7 von Status : 1 auf Status : 2.000000]
Aug  5 10:46:54 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 8 von Status : 1 auf Status : 2.000000]
Aug  5 10:46:54 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 8 von Status : 1 auf Status : 2.000000]
Aug  5 10:48:31 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  5 10:48:31 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 2 von Status : 1 auf Status : 2.000000]
Aug  5 10:50:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 10:53:05 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 4 von Status : 1 auf Status : 2.000000]
Aug  5 10:53:05 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 4 von Status : 1 auf Status : 2.000000]
Aug  5 11:00:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 11:03:08 Homematic-Raspi user.err multimac: Copro timeout on ACK_AESChallenge send
Aug  5 11:10:07 Homematic-Raspi daemon.notice wpa_supplicant[453]: wlan0: WPA: Group rekeying completed with 34:31:c4:71:8f:68 [GTK=CCMP]
Aug  5 11:16:10 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 5 von Status : 1 auf Status : 2.000000]
Aug  5 11:16:10 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 5 von Status : 1 auf Status : 2.000000]
Aug  5 11:17:05 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 6 von Status : 1 auf Status : 2.000000]
Aug  5 11:17:06 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 6 von Status : 1 auf Status : 2.000000]
Aug  5 11:17:33 Homematic-Raspi user.debug script: [Panel 1 Kueche - Setzen Kanal : 9 von Status : 1 auf Status : 2.000000]
Aug  5 11:17:33 Homematic-Raspi user.debug script: [Panel 2 Wohnen - Setzen Kanal : 9 von Status : 1 auf Status : 2.000000]
Gruß Klana
Es ist nett, wichtig zu sein. Aber es ist wichtiger, nett zu sein.
Nach oben
Int17
Beiträge: 34
Registriert: 30.09.2017, 21:40
Hat sich bedankt: 1 Mal

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von Int17 » 05.08.2018, 13:03

Fmc hat geschrieben: ↑
16.07.2018, 22:23
 Guten Abend zusammen,

leider ist der Fehler der falschen Darstellung geblieben :

Unbenannt.JPG


Oder habe ich Tomaten auf den augen und mache etwas falsch ?

Grüße

Problem habe ich auch. Nach Eingabe eines Wertes (hier 40) wird der nur kurz dargestellt und dann von -100 überschrieben.
Dateianhänge
R2.jpg
-100
R2.jpg (21.84 KiB) 1949 mal betrachtet
R1.jpg
40
Nach oben
LibertyX
Beiträge: 767
Registriert: 10.11.2012, 19:47
System: Alternative CCU (auf Basis OCCU)
Wohnort: RP
Hat sich bedankt: 1 Mal
Danksagung erhalten: 19 Mal

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von LibertyX » 05.08.2018, 13:44

Ich habe ein ähnliches Problem mit meinen Dimmaktoren, eigentlich steht er auf 50% wird aber als 0,5 angezeigt und das Zahnrad geht auch nicht mehr weg.
screenCapture_530415734_34033506_0.jpg
RaspberryMatic (3.71.12.20231020) @RPI3 | 218 Kanäle in 53 Geräten und 72 CUxD-Kanäle in 8 CUxD-Geräten (2.11) | iobroker.pro - CCU-Historian (3.4.0)
Nach oben
LibertyX
Beiträge: 767
Registriert: 10.11.2012, 19:47
System: Alternative CCU (auf Basis OCCU)
Wohnort: RP
Hat sich bedankt: 1 Mal
Danksagung erhalten: 19 Mal

Re: RaspberryMatic 2.35.16.20180715 – Erfahrungsberichte

Beitrag von LibertyX » 05.08.2018, 14:29

Ich habe mir das ganze jetzt nochmal angeschaut.

Ich stelle den Aktor auf einen Wert von 10%, die LED gehen auch auf 10% an es wird in der WebUi aber 0,5 angezeigt.
screenCapture_1.jpg
Wenn ich dann auch AUS drücke, gehen die LED´s auch aus aber in der WebUI wird der Aktor weiterhin als aktiv mit 9,5% angezeigt.
screenCapture_2.jpg
screenCapture_2.jpg (24.39 KiB) 1924 mal betrachtet
Erst wenn ich ein zweites mal auf AUS drücke, wird es korrekt angezeigt.
screenCapture_3.jpg

Zudem ist mir noch aufgefallen, dass vor allem komplexere Programme mit vielen Bedingungen, sehr zeitverzögert ausgeführt werden,
teilweise bis zu 15-20 Minuten. Also obwohl die Bedingungen in einem Abschnitt erfüllt sind, wird das "DANN" erst einige Zeit später ausgeführt, obwohl keine Verzögerung eingestellt ist.
RaspberryMatic (3.71.12.20231020) @RPI3 | 218 Kanäle in 53 Geräten und 72 CUxD-Kanäle in 8 CUxD-Geräten (2.11) | iobroker.pro - CCU-Historian (3.4.0)
Nach oben
Gesperrt

Zurück zu „RaspberryMatic“