ioBroker auf "TinkerMatic"?
Moderatoren: jmaus, Co-Administratoren
-
- Beiträge: 393
- Registriert: 26.06.2018, 11:02
- Hat sich bedankt: 4 Mal
- Danksagung erhalten: 11 Mal
Re: ioBroker auf "TinkerMatic"?
Seit einigen Tagen läuft das ioBroker AddOn. Es sind die standardmäßigen Adapter an Bord plus HUE, vis, info, web. Den Backup-Adapter habe ich deinstalliert. Bemerkenswert ist, dass die Backupdatei auf dem USB-Stick täglich um 1 bis 3 MB wächst. Ich habe noch keine Visualisiereung gebaut, auch gibt es keine gewollte Datenaufzeichnung (kein History oder ähnlichen Adapter, kein Java usw.). Das Backup liegt aktuell bei knapp 170 MB.
Fragen:
Was sorgt für das kontinuierliche Wachsen der Backupdatei?
Kann ich das ioBroker AddOn vom täglichen Backup ausschließen?
Kann ich die Daten vom ioBroker in ein anderes Verzeichnis umlenken?
Ich sehe gerade, dass die tägliche Logdatei immer mitgesichert wird. Lässt sich das Speichern des Logging abstellen?
Fragen:
Was sorgt für das kontinuierliche Wachsen der Backupdatei?
Kann ich das ioBroker AddOn vom täglichen Backup ausschließen?
Kann ich die Daten vom ioBroker in ein anderes Verzeichnis umlenken?
Ich sehe gerade, dass die tägliche Logdatei immer mitgesichert wird. Lässt sich das Speichern des Logging abstellen?
- zautrix
- Beiträge: 383
- Registriert: 22.05.2016, 18:41
- Wohnort: Badisch-Sibirien
- Danksagung erhalten: 40 Mal
Re: ioBroker auf "TinkerMatic"?
Keine Ahnung. Meine Backupdatei (397 MB) ist jetzt in 30 Tagen um 3 MB gewachsen. Mit 'ner Menge History Einträge.Raspihausfan_1 hat geschrieben: ↑19.07.2019, 11:19Seit einigen Tagen läuft das ioBroker AddOn. Es sind die standardmäßigen Adapter an Bord plus HUE, vis, info, web. Den Backup-Adapter habe ich deinstalliert. Bemerkenswert ist, dass die Backupdatei auf dem USB-Stick täglich um 1 bis 3 MB wächst. Ich habe noch keine Visualisiereung gebaut, auch gibt es keine gewollte Datenaufzeichnung (kein History oder ähnlichen Adapter, kein Java usw.). Das Backup liegt aktuell bei knapp 170 MB.
Fragen:
Was sorgt für das kontinuierliche Wachsen der Backupdatei?
Ja, musst Du im Forum suchen, wie das geht. Ich hab's mehrfach gelesen wie das geht, mir aber nicht abgeschrieben, da es mich nicht interessiert hat.Raspihausfan_1 hat geschrieben: ↑19.07.2019, 11:19Kann ich das ioBroker AddOn vom täglichen Backup ausschließen?
Was sollen denn "Daten vom ioBroker" sein ? History Einträge z.B. kann man so konfigurieren, dass sie woanders hingespeichert werden.Raspihausfan_1 hat geschrieben: ↑19.07.2019, 11:19Kann ich die Daten vom ioBroker in ein anderes Verzeichnis umlenken?
Es wird grundsätzlich immer die komplette ioBroker-Installation im Backup gespeichert.Raspihausfan_1 hat geschrieben: ↑19.07.2019, 11:19Ich sehe gerade, dass die tägliche Logdatei immer mitgesichert wird. Lässt sich das Speichern des Logging abstellen?
Wie weit jetzt das Log und wohin gespeichert wird kann ich nicht sagen und interessiert mich auch nicht.
Spezifische ioBroker Fragen solltest Du am Besten im ioBroker Forum stellen.
Im Prinzip sind ja alle deine Fragen außer der Frage "Kann ich das ioBroker AddOn vom täglichen Backup ausschließen?" ioBroker spezifisch und wären besser im ioBroker Forum aufgehoben, da ich mich damit nicht auskenne. Ich installiere die Addons und benutze sie so, wie sie sind.
Sorry, dass ich dir da nicht helfen kann.
Gruß aus Nord-Baden,
z.
z.
Re: ioBroker auf "TinkerMatic"?
Hallo,
Ich nutze das ioBroker Addon von zautrix auf RasperryMatic.
Mein erster Adapter, den ich installieren wollte ist "Bluetooth Low Energy" welches durch Fehler nicht installiert werden konnte.
Könnte dies jemand mal testen und mir helfen?
Bin Neuling.
Vielen Dank.
Ich nutze das ioBroker Addon von zautrix auf RasperryMatic.
Mein erster Adapter, den ich installieren wollte ist "Bluetooth Low Energy" welches durch Fehler nicht installiert werden konnte.
Könnte dies jemand mal testen und mir helfen?
Bin Neuling.
Vielen Dank.
-
- Beiträge: 12928
- Registriert: 16.01.2009, 18:48
- Wohnort: Steingaden
- Hat sich bedankt: 1604 Mal
- Danksagung erhalten: 222 Mal
Re: ioBroker auf "TinkerMatic"?
da bist du aber im iobroker - forum besser aufgehoben ... und ja es ist nicht das einfachste thema ....
-------
!!! der download der handbüchern auf den seiten von eq3 und das lesen der tips und tricks kann das hm-leben sehr erleichtern - das nutzen der suche nach schlagworten ebenso !!!
wer schreibfehler findet darf sie behalten.
!!! der download der handbüchern auf den seiten von eq3 und das lesen der tips und tricks kann das hm-leben sehr erleichtern - das nutzen der suche nach schlagworten ebenso !!!
wer schreibfehler findet darf sie behalten.
-
- Beiträge: 12928
- Registriert: 16.01.2009, 18:48
- Wohnort: Steingaden
- Hat sich bedankt: 1604 Mal
- Danksagung erhalten: 222 Mal
Re: ioBroker auf "TinkerMatic"?
dann musst du wenigstens sagen und zeigen welche fehler ....
-------
!!! der download der handbüchern auf den seiten von eq3 und das lesen der tips und tricks kann das hm-leben sehr erleichtern - das nutzen der suche nach schlagworten ebenso !!!
wer schreibfehler findet darf sie behalten.
!!! der download der handbüchern auf den seiten von eq3 und das lesen der tips und tricks kann das hm-leben sehr erleichtern - das nutzen der suche nach schlagworten ebenso !!!
wer schreibfehler findet darf sie behalten.
Re: ioBroker auf "TinkerMatic"?
$ ./iobroker add ble --host RaspberryMatic
NPM version: 6.4.1
npm install iobroker.ble@0.7.2 --unsafe-perm --production --save --prefix "/usr/local/addons/hm-iobroker" (System call)
npm
notice created a lockfile as package-lock.json. You should commit this file.
┌───────────────────────────────────────────────────┐
│ npm update check failed │
│ Try running with sudo or get access │
│ to the local update config store via │
│ sudo chown -R $USER:$(id -gn $USER) /root/.config │
└───────────────────────────────────────────────────┘
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/diskusage
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
prebuild-install
info begin Prebuild-install version 5.3.0
prebuild-install info looking for cached prebuild @ /usr/local/addons/hm-iobroker/npm_io/.npm/_prebuilds/2643fa-usb-v1.6.0-node-v64-linux-arm.tar.gz
prebuild-install http request
GET https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install
http 404 https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install
WARN install No prebuilt binaries found (target=10.15.3 runtime=node arch=arm libc= platform=linux)
gyp
ERR!
configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR!
stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp
ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)gyp ERR! stack
at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5gyp
ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5gyp
ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58gyp ERR! command
"/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/usb
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0gyp ERR! not ok
node-pre-gyp
WARN Using request for node-pre-gyp https download
node-pre-gyp WARN Tried to download(404): https://github.com/sandeepmistry/node-b ... arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for @abandonware/bluetooth-hci-socket@0.5.3-1 and node@10.15.3 (node-v64 ABI, unknown) (falling back to source compile with node-gyp)
gyp
ERR! configure error
gyp
ERR!
stack
Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp
ERR!
stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp
ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)gyp
ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp
ERR! System Linux 4.19.58gyp
ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node" "--module_name=binding" "--module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding" "--napi_version=3" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp
ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node --module_name=binding --module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding --napi_version=3 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR!
stack at ChildProcess.emit (events.js:189:13)node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:970:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.58node-pre-gyp ERR! command "/usr/bin/node" "/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR!
cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socketnode-pre-gyp ERR! node -v v10.15.3
node-pre-gyp ERR! node-pre-gyp -v v0.12.0
node-pre-gyp ERR! not ok
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR!
stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp
ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack
at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58gyp ERR! command
"/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/noble
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp
ERR! not ok
npm
WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 (node_modules/diskusage):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 install: node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 (node_modules/usb):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 install: prebuild-install --verbose || node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 (node_modules/@abandonware/bluetooth-hci-socket):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 install: node-pre-gyp install --fallback-to-build
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm ERR! code ELIFECYCLEnpm ERR! errno 1
npm ERR! @abandonware/noble@1.9.2-3 install: node-gyp rebuildnpm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @abandonware/noble@1.9.2-3 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/addons/hm-iobroker/npm_io/.npm/_logs/2019-07-29T16_39_10_696Z-debug.log
host.RaspberryMatic install adapter ble
NPM version: 6.4.1npm install iobroker.ble@0.7.2 --unsafe-perm --production --save --prefix "/usr/local/addons/hm-iobroker" (System call)
npm notice
created a lockfile as package-lock.json. You should commit this file.
┌───────────────────────────────────────────────────┐
│ npm update check failed │
│ Try running with sudo or get access │
│ to the local update config store via │
│ sudo chown -R $USER:$(id -gn $USER) /root/.config │
└───────────────────────────────────────────────────┘
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/diskusage
gyp ERR!
node -v v10.15.3gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
prebuild-install
info
begin Prebuild-install version 5.3.0
prebuild-install
info looking for cached prebuild @ /usr/local/addons/hm-iobroker/npm_io/.npm/_prebuilds/2643fa-usb-v1.6.0-node-v64-linux-arm.tar.gz
prebuild-install http request GET https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install http 404 https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install WARN install No prebuilt binaries found (target=10.15.3 runtime=node arch=arm libc= platform=linux)
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack
at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR!
stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR!
stack at FSReqWrap.oncomplete (fs.js:153:21)gyp ERR! System
Linux 4.19.58gyp
ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR!
cwd /usr/local/addons/hm-iobroker/node_modules/usbgyp
ERR!
node -v v10.15.3gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp
WARN Using request for node-pre-gyp https download
node-pre-gyp
WARN Tried to download(404): https://github.com/sandeepmistry/node-b ... arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for @abandonware/bluetooth-hci-socket@0.5.3-1 and node@10.15.3 (node-v64 ABI, unknown) (falling back to source compile with node-gyp)
gyp
ERR! configure error
gyp
ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node" "--module_name=binding" "--module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding" "--napi_version=3" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node --module_name=binding --module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding --napi_version=3 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:189:13)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:970:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.58
node-pre-gyp ERR! command "/usr/bin/node" "/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket
node-pre-gyp ERR! node -v v10.15.3
node-pre-gyp ERR! node-pre-gyp -v v0.12.0
node-pre-gyp ERR! not ok
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp
ERR! stack
at FSReqWrap.oncomplete (fs.js:153:21)
gyp
ERR! System
Linux 4.19.58gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/noble
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 (node_modules/diskusage):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 install: node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 (node_modules/usb):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 install: prebuild-install --verbose || node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 (node_modules/@abandonware/bluetooth-hci-socket):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 install: node-pre-gyp install --fallback-to-build
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm ERR! code ELIFECYCLEnpm ERR! errno 1
npm ERR! @abandonware/noble@1.9.2-3 install: node-gyp rebuild
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @abandonware/noble@1.9.2-3 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/addons/hm-iobroker/npm_io/.npm/_logs/2019-07-29T16_39_50_577Z-debug.log
host.RaspberryMatic install adapter ble
NPM version: 6.4.1
npm install iobroker.ble@0.7.2 --unsafe-perm --production --save --prefix "/usr/local/addons/hm-iobroker" (System call)
npm
notice created a lockfile as package-lock.json. You should commit this file.
┌───────────────────────────────────────────────────┐
│ npm update check failed │
│ Try running with sudo or get access │
│ to the local update config store via │
│ sudo chown -R $USER:$(id -gn $USER) /root/.config │
└───────────────────────────────────────────────────┘
gyp
ERR!
configure error
gyp
ERR!
stack
Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR!
stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack
at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58
gyp
ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/diskusage
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0gyp ERR! not ok
prebuild-install
info begin Prebuild-install version 5.3.0
prebuild-install
info looking for cached prebuild @ /usr/local/addons/hm-iobroker/npm_io/.npm/_prebuilds/2643fa-usb-v1.6.0-node-v64-linux-arm.tar.gz
prebuild-install http request GET https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install
http 404 https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install
WARN install No prebuilt binaries found (target=10.15.3 runtime=node arch=arm libc= platform=linux)
gyp
ERR!
configure error
gyp
ERR!
stack
Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp
ERR!
stack
at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp
ERR!
stack
at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR!
stack at FSReqWrap.oncomplete (fs.js:153:21)gyp ERR! System Linux 4.19.58
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/usb
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0gyp ERR! not ok
node-pre-gyp
WARN Using request for node-pre-gyp https download
node-pre-gyp WARN Tried to download(404): https://github.com/sandeepmistry/node-b ... arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for @abandonware/bluetooth-hci-socket@0.5.3-1 and node@10.15.3 (node-v64 ABI, unknown) (falling back to source compile with node-gyp)
gyp
ERR! configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node" "--module_name=binding" "--module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding" "--napi_version=3" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR!
stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node --module_name=binding --module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding --napi_version=3 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:189:13)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:970:16)
node-pre-gyp ERR!
stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.58
node-pre-gyp ERR! command "/usr/bin/node" "/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"node-pre-gyp ERR! cwd
/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socketnode-pre-gyp ERR! node -v v10.15.3
node-pre-gyp ERR!
node-pre-gyp -v v0.12.0node-pre-gyp ERR! not ok
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack
at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp
ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)gyp
ERR! System Linux 4.19.58gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/noble
gyp ERR!
node -v v10.15.3gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 (node_modules/diskusage):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 install: node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 (node_modules/usb):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 install: prebuild-install --verbose || node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 (node_modules/@abandonware/bluetooth-hci-socket):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 install: node-pre-gyp install --fallback-to-build
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm ERR! code ELIFECYCLEnpm ERR! errno 1
npm ERR! @abandonware/noble@1.9.2-3 install: node-gyp rebuildnpm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @abandonware/noble@1.9.2-3 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/addons/hm-iobroker/npm_io/.npm/_logs/2019-07-29T16_40_31_541Z-debug.log
host.RaspberryMatic install adapter ble
ERROR: host.RaspberryMatic Cannot install ble
ERROR: process exited with code 13
NPM version: 6.4.1
npm install iobroker.ble@0.7.2 --unsafe-perm --production --save --prefix "/usr/local/addons/hm-iobroker" (System call)
npm
notice created a lockfile as package-lock.json. You should commit this file.
┌───────────────────────────────────────────────────┐
│ npm update check failed │
│ Try running with sudo or get access │
│ to the local update config store via │
│ sudo chown -R $USER:$(id -gn $USER) /root/.config │
└───────────────────────────────────────────────────┘
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/diskusage
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
prebuild-install
info begin Prebuild-install version 5.3.0
prebuild-install info looking for cached prebuild @ /usr/local/addons/hm-iobroker/npm_io/.npm/_prebuilds/2643fa-usb-v1.6.0-node-v64-linux-arm.tar.gz
prebuild-install http request
GET https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install
http 404 https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install
WARN install No prebuilt binaries found (target=10.15.3 runtime=node arch=arm libc= platform=linux)
gyp
ERR!
configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR!
stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp
ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)gyp ERR! stack
at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5gyp
ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5gyp
ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58gyp ERR! command
"/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/usb
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0gyp ERR! not ok
node-pre-gyp
WARN Using request for node-pre-gyp https download
node-pre-gyp WARN Tried to download(404): https://github.com/sandeepmistry/node-b ... arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for @abandonware/bluetooth-hci-socket@0.5.3-1 and node@10.15.3 (node-v64 ABI, unknown) (falling back to source compile with node-gyp)
gyp
ERR! configure error
gyp
ERR!
stack
Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp
ERR!
stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp
ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)gyp
ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp
ERR! System Linux 4.19.58gyp
ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node" "--module_name=binding" "--module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding" "--napi_version=3" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp
ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node --module_name=binding --module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding --napi_version=3 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR!
stack at ChildProcess.emit (events.js:189:13)node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:970:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.58node-pre-gyp ERR! command "/usr/bin/node" "/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR!
cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socketnode-pre-gyp ERR! node -v v10.15.3
node-pre-gyp ERR! node-pre-gyp -v v0.12.0
node-pre-gyp ERR! not ok
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR!
stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp
ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack
at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58gyp ERR! command
"/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/noble
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp
ERR! not ok
npm
WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 (node_modules/diskusage):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 install: node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 (node_modules/usb):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 install: prebuild-install --verbose || node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 (node_modules/@abandonware/bluetooth-hci-socket):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 install: node-pre-gyp install --fallback-to-build
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm ERR! code ELIFECYCLEnpm ERR! errno 1
npm ERR! @abandonware/noble@1.9.2-3 install: node-gyp rebuildnpm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @abandonware/noble@1.9.2-3 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/addons/hm-iobroker/npm_io/.npm/_logs/2019-07-29T16_39_10_696Z-debug.log
host.RaspberryMatic install adapter ble
NPM version: 6.4.1npm install iobroker.ble@0.7.2 --unsafe-perm --production --save --prefix "/usr/local/addons/hm-iobroker" (System call)
npm notice
created a lockfile as package-lock.json. You should commit this file.
┌───────────────────────────────────────────────────┐
│ npm update check failed │
│ Try running with sudo or get access │
│ to the local update config store via │
│ sudo chown -R $USER:$(id -gn $USER) /root/.config │
└───────────────────────────────────────────────────┘
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/diskusage
gyp ERR!
node -v v10.15.3gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
prebuild-install
info
begin Prebuild-install version 5.3.0
prebuild-install
info looking for cached prebuild @ /usr/local/addons/hm-iobroker/npm_io/.npm/_prebuilds/2643fa-usb-v1.6.0-node-v64-linux-arm.tar.gz
prebuild-install http request GET https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install http 404 https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install WARN install No prebuilt binaries found (target=10.15.3 runtime=node arch=arm libc= platform=linux)
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack
at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR!
stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR!
stack at FSReqWrap.oncomplete (fs.js:153:21)gyp ERR! System
Linux 4.19.58gyp
ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR!
cwd /usr/local/addons/hm-iobroker/node_modules/usbgyp
ERR!
node -v v10.15.3gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp
WARN Using request for node-pre-gyp https download
node-pre-gyp
WARN Tried to download(404): https://github.com/sandeepmistry/node-b ... arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for @abandonware/bluetooth-hci-socket@0.5.3-1 and node@10.15.3 (node-v64 ABI, unknown) (falling back to source compile with node-gyp)
gyp
ERR! configure error
gyp
ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node" "--module_name=binding" "--module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding" "--napi_version=3" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node --module_name=binding --module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding --napi_version=3 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:189:13)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:970:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.58
node-pre-gyp ERR! command "/usr/bin/node" "/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket
node-pre-gyp ERR! node -v v10.15.3
node-pre-gyp ERR! node-pre-gyp -v v0.12.0
node-pre-gyp ERR! not ok
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp
ERR! stack
at FSReqWrap.oncomplete (fs.js:153:21)
gyp
ERR! System
Linux 4.19.58gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/noble
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 (node_modules/diskusage):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 install: node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 (node_modules/usb):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 install: prebuild-install --verbose || node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 (node_modules/@abandonware/bluetooth-hci-socket):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 install: node-pre-gyp install --fallback-to-build
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm ERR! code ELIFECYCLEnpm ERR! errno 1
npm ERR! @abandonware/noble@1.9.2-3 install: node-gyp rebuild
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @abandonware/noble@1.9.2-3 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/addons/hm-iobroker/npm_io/.npm/_logs/2019-07-29T16_39_50_577Z-debug.log
host.RaspberryMatic install adapter ble
NPM version: 6.4.1
npm install iobroker.ble@0.7.2 --unsafe-perm --production --save --prefix "/usr/local/addons/hm-iobroker" (System call)
npm
notice created a lockfile as package-lock.json. You should commit this file.
┌───────────────────────────────────────────────────┐
│ npm update check failed │
│ Try running with sudo or get access │
│ to the local update config store via │
│ sudo chown -R $USER:$(id -gn $USER) /root/.config │
└───────────────────────────────────────────────────┘
gyp
ERR!
configure error
gyp
ERR!
stack
Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR!
stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack
at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58
gyp
ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/diskusage
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0gyp ERR! not ok
prebuild-install
info begin Prebuild-install version 5.3.0
prebuild-install
info looking for cached prebuild @ /usr/local/addons/hm-iobroker/npm_io/.npm/_prebuilds/2643fa-usb-v1.6.0-node-v64-linux-arm.tar.gz
prebuild-install http request GET https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install
http 404 https://github.com/tessel/node-usb/rele ... arm.tar.gz
prebuild-install
WARN install No prebuilt binaries found (target=10.15.3 runtime=node arch=arm libc= platform=linux)
gyp
ERR!
configure error
gyp
ERR!
stack
Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp
ERR!
stack
at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp
ERR!
stack
at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR!
stack at FSReqWrap.oncomplete (fs.js:153:21)gyp ERR! System Linux 4.19.58
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/usb
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0gyp ERR! not ok
node-pre-gyp
WARN Using request for node-pre-gyp https download
node-pre-gyp WARN Tried to download(404): https://github.com/sandeepmistry/node-b ... arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for @abandonware/bluetooth-hci-socket@0.5.3-1 and node@10.15.3 (node-v64 ABI, unknown) (falling back to source compile with node-gyp)
gyp
ERR! configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
gyp ERR!
stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)
gyp ERR! System Linux 4.19.58
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node" "--module_name=binding" "--module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding" "--napi_version=3" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket
gyp ERR! node -v v10.15.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR!
stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node --module_name=binding --module_path=/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding --napi_version=3 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:189:13)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:970:16)
node-pre-gyp ERR!
stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.58
node-pre-gyp ERR! command "/usr/bin/node" "/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"node-pre-gyp ERR! cwd
/usr/local/addons/hm-iobroker/node_modules/@abandonware/bluetooth-hci-socketnode-pre-gyp ERR! node -v v10.15.3
node-pre-gyp ERR!
node-pre-gyp -v v0.12.0node-pre-gyp ERR! not ok
gyp
ERR! configure error
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
gyp ERR! stack at PythonFinder.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
gyp ERR! stack
at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/index.js:42:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
gyp
ERR! stack at FSReqWrap.oncomplete (fs.js:153:21)gyp
ERR! System Linux 4.19.58gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/addons/hm-iobroker/node_modules/@abandonware/noble
gyp ERR!
node -v v10.15.3gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 (node_modules/diskusage):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: diskusage@1.1.3 install: node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 (node_modules/usb):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: usb@1.6.0 install: prebuild-install --verbose || node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 (node_modules/@abandonware/bluetooth-hci-socket):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 install: node-pre-gyp install --fallback-to-build
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm ERR! code ELIFECYCLEnpm ERR! errno 1
npm ERR! @abandonware/noble@1.9.2-3 install: node-gyp rebuildnpm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @abandonware/noble@1.9.2-3 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/addons/hm-iobroker/npm_io/.npm/_logs/2019-07-29T16_40_31_541Z-debug.log
host.RaspberryMatic install adapter ble
ERROR: host.RaspberryMatic Cannot install ble
ERROR: process exited with code 13
-
- Beiträge: 12928
- Registriert: 16.01.2009, 18:48
- Wohnort: Steingaden
- Hat sich bedankt: 1604 Mal
- Danksagung erhalten: 222 Mal
Re: ioBroker auf "TinkerMatic"?
wenn iobroker auf einem PI mit RM installiert wird ist das schon ein problem ( für mich ) : iobroker braucht 4GB ...
und ansonsten wie steht es mit dem platz auf der speicherkarte aus ? wurde sie vor der installation von iobroker erweitert ( wenn RM das nicht alleinig macht...) was ist mit den sudo rechten ? ... aber das ist nicht wirklich meine welt ... ( leider )
doch ich habe kein RM aber mich 48 stunden mit iobroker und einem PI3B+ geärgert .... 24std später war ein t-board mit 4GB da und alles gut
ach: und dann ist da noch die erste antwort am themenstart ........
und ansonsten wie steht es mit dem platz auf der speicherkarte aus ? wurde sie vor der installation von iobroker erweitert ( wenn RM das nicht alleinig macht...) was ist mit den sudo rechten ? ... aber das ist nicht wirklich meine welt ... ( leider )
doch ich habe kein RM aber mich 48 stunden mit iobroker und einem PI3B+ geärgert .... 24std später war ein t-board mit 4GB da und alles gut
ach: und dann ist da noch die erste antwort am themenstart ........
-------
!!! der download der handbüchern auf den seiten von eq3 und das lesen der tips und tricks kann das hm-leben sehr erleichtern - das nutzen der suche nach schlagworten ebenso !!!
wer schreibfehler findet darf sie behalten.
!!! der download der handbüchern auf den seiten von eq3 und das lesen der tips und tricks kann das hm-leben sehr erleichtern - das nutzen der suche nach schlagworten ebenso !!!
wer schreibfehler findet darf sie behalten.
-
- Beiträge: 12928
- Registriert: 16.01.2009, 18:48
- Wohnort: Steingaden
- Hat sich bedankt: 1604 Mal
- Danksagung erhalten: 222 Mal
Re: ioBroker auf "TinkerMatic"?
das ist nicht viel .....
wie gesagt ich würde iobroker alleine installieren ( und aufpassen das die speicherkarte dabei wieder im vollen umfang freigegeben wird )
wie gesagt ich würde iobroker alleine installieren ( und aufpassen das die speicherkarte dabei wieder im vollen umfang freigegeben wird )
-------
!!! der download der handbüchern auf den seiten von eq3 und das lesen der tips und tricks kann das hm-leben sehr erleichtern - das nutzen der suche nach schlagworten ebenso !!!
wer schreibfehler findet darf sie behalten.
!!! der download der handbüchern auf den seiten von eq3 und das lesen der tips und tricks kann das hm-leben sehr erleichtern - das nutzen der suche nach schlagworten ebenso !!!
wer schreibfehler findet darf sie behalten.