26.10
RaspberryMatic 3.47.22.20191026 – Erfahrungsberichte
Moderatoren: jmaus, Co-Administratoren
-
- Beiträge: 313
- Registriert: 26.11.2016, 12:52
- Hat sich bedankt: 6 Mal
- Danksagung erhalten: 11 Mal
Re: RaspberryMatic 3.47.22.20191026 – Erfahrungsberichte
Hallo
Mein System läuft vorwiegend unauffällig! Allerdings gab es heute ein Problem mit den LAN Gateway, viele Fehlermeldungen im log. Nach einem Neustart des LANGW sind keine weiteren Fehlermeldungen mehr aufgetreten. Hab das GW aber lange nicht mehr aktualisiert. Auf meiner Raspberrymatic, aktuelle Version wird unter Systemsteuerung/Lan Gateway Konfiguration die Firmware Version 1.4.1 angezeigt. Ist dies die aktuellste oder sollte ich am GW mal ein Update mit der aktuellen ...20191026 machen. Das LAN Gateway läuft auf Raspi 1B und dem alten Funkmodul.
Vielleicht könnte jemand für mich nachsehen, welche Version bei ihm angezeigt wird, danke
Mein System läuft vorwiegend unauffällig! Allerdings gab es heute ein Problem mit den LAN Gateway, viele Fehlermeldungen im log. Nach einem Neustart des LANGW sind keine weiteren Fehlermeldungen mehr aufgetreten. Hab das GW aber lange nicht mehr aktualisiert. Auf meiner Raspberrymatic, aktuelle Version wird unter Systemsteuerung/Lan Gateway Konfiguration die Firmware Version 1.4.1 angezeigt. Ist dies die aktuellste oder sollte ich am GW mal ein Update mit der aktuellen ...20191026 machen. Das LAN Gateway läuft auf Raspi 1B und dem alten Funkmodul.
Vielleicht könnte jemand für mich nachsehen, welche Version bei ihm angezeigt wird, danke
Code: Alles auswählen
Nov 4 13:15:53 Raspi-ccu2 user.err rfd: XmlRpc transport error
Nov 4 13:16:00 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:05 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:06 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:09 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:09 Raspi-ccu2 user.err rfd: UnifiedLanCommController::connect(): Unable to connect.
Nov 4 13:16:09 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:10 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:11 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:12 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:13 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:16 Raspi-ccu2 user.err rfd: UnifiedLanCommController::connect(): Could not connect.
Nov 4 13:16:17 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:20 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 13:16:23 Raspi-ccu2 user.err rfd: UnifiedLanCommController::connect(): Could not connect.
Nov 4 13:36:35 Raspi-ccu2 user.err rfd: LGWPortWrapper::keepAliveThreadFunction(): Did not receive reply on keepalive.
Nov 4 13:36:39 Raspi-ccu2 user.err rfd: LGWPortWrapper::ReadData(): Receive error
Nov 4 13:36:54 Raspi-ccu2 user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF","OEQ1962207:1","TEMPERATURE",16.000000}]}) on http://192.169.3.25:2098/RPC2:
Nov 4 13:36:54 Raspi-ccu2 user.err rfd: XmlRpc transport error
Nov 4 13:37:28 Raspi-ccu2 user.err rfd: LGWPortWrapper::keepAliveThreadFunction(): Did not receive reply on keepalive.
Nov 4 13:37:32 Raspi-ccu2 user.err rfd: LGWPortWrapper::ReadData(): Receive error
Nov 4 13:39:30 Raspi-ccu2 user.err rfd: LGWPortWrapper::keepAliveThreadFunction(): Did not receive reply on keepalive.
Nov 4 13:39:30 Raspi-ccu2 user.err rfd: LGWPortWrapper::ReadData(): Receive error
Nov 4 13:40:13 Raspi-ccu2 user.err rfd: LGWPortWrapper::keepAliveThreadFunction(): Did not receive reply on keepalive.
Nov 4 13:40:17 Raspi-ccu2 user.err rfd: LGWPortWrapper::ReadData(): Receive error
Nov 4 13:41:11 Raspi-ccu2 user.debug script: [ALCHY ALLINScript START]
Nov 4 13:41:11 Raspi-ccu2 user.debug script: [ALCHY ALLINScript Abbruch BLOCK]
Nov 4 13:41:54 Raspi-ccu2 user.err rfd: LGWPortWrapper::keepAliveThreadFunction(): Did not receive reply on keepalive.
Nov 4 13:41:54 Raspi-ccu2 user.err rfd: LGWPortWrapper::ReadData(): Receive error
Nov 4 13:55:42 Raspi-ccu2 daemon.info cuxd[655]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:1965
Nov 4 14:14:46 Raspi-ccu2 user.err rfd: LGWPortWrapper::keepAliveThreadFunction(): Did not receive reply on keepalive.
Nov 4 14:14:50 Raspi-ccu2 user.err rfd: LGWPortWrapper::ReadData(): Receive error
Nov 4 14:15:00 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 14:15:17 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 14:15:19 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 14:15:20 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 14:15:22 Raspi-ccu2 user.err rfd: UnifiedLanCommController::connect(): Unable to connect.
Nov 4 14:15:25 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 14:15:26 Raspi-ccu2 user.err rfd: (OEQ0307663) CCU2CommController::getDutyCycle(): Could not get DutyCycle from coprocessor.
Nov 4 14:15:27 Raspi-ccu2 user.err rfd: UnifiedLanCommController::connect(): Unable to connect.
JoMass
~200 Geräte; ~70 Programme FW: 3.75.6.20240316 – Odroid N2+ 4GB 64GB-SSD , Homeassistant (latest), - HISTORIAN V3.6.0 auf QNAP; Mediola AIO Creator NEO - Node-RED (Current version: 17.0.10 (3.1.7))
~200 Geräte; ~70 Programme FW: 3.75.6.20240316 – Odroid N2+ 4GB 64GB-SSD , Homeassistant (latest), - HISTORIAN V3.6.0 auf QNAP; Mediola AIO Creator NEO - Node-RED (Current version: 17.0.10 (3.1.7))
-
- Beiträge: 229
- Registriert: 13.06.2016, 19:02
- Hat sich bedankt: 19 Mal
- Danksagung erhalten: 2 Mal
Re: RaspberryMatic 3.47.22.20191026 – Erfahrungsberichte
Konnte bei mir zwischen der letzten und dieser Version keine Differenzen bei den DCs feststellen. Hilft Dir persönlich nur begrenzt.
Bei einer Uptime von > 8 Tagen ist Dein DC auch höchstwahrscheinlich nicht mehr im Bereich "kann nach dem Booten schonmal passieren".
Du solltest mal den üblichen Trouble Shooting Hinweisen zum Thema Duty Cycle folgen. z.B. viewtopic.php?t=38220 bzw. dazu weiter im Forum recherchieren...
Gruß,
Oli
-
- Beiträge: 251
- Registriert: 24.10.2019, 01:51
- Hat sich bedankt: 12 Mal
- Danksagung erhalten: 6 Mal
Re: RaspberryMatic 3.47.22.20191026 – Erfahrungsberichte
Jetzt ist mein DC noch höher, und hier ist nichts passiert. Sowas hatte ich in den ganzen Jahren wo ich HM habe noch nie gehabt.
Erst mit der Version 3.47.22.20191026 habe ich das.
Erst mit der Version 3.47.22.20191026 habe ich das.
-
- Beiträge: 229
- Registriert: 13.06.2016, 19:02
- Hat sich bedankt: 19 Mal
- Danksagung erhalten: 2 Mal
Re: RaspberryMatic 3.47.22.20191026 – Erfahrungsberichte
Und wenn Du auf die alte Micro-SD-Card / RM-Version zurückgehst legt sich das nachweislich?
HM-Hardware kann auch mal kaputtgehen, bei Battery Low Traffic produzieren usw.
Wie gesagt: Versuche obiges und folge ansonsten den allgemeinen DC-Troubleshooting-Hinweisen.
Gruß,
Oli
-
- Beiträge: 3000
- Registriert: 28.01.2016, 18:06
- System: CCU
- Wohnort: Hürth
- Hat sich bedankt: 16 Mal
- Danksagung erhalten: 260 Mal
Re: RaspberryMatic 3.47.22.20191026 – Erfahrungsberichte
Hi!
Führe mal folgendes Skript auf Deiner Zentrale aus:
Ich hatte ein ähnliches Problem und danach ging der DutyCycle wieder auf normale Werte zurück.
Gruß
Gerti
Führe mal folgendes Skript auf Deiner Zentrale aus:
Code: Alles auswählen
string stdout;
string stderr;
system.Exec("/etc/init.d/S62HMServer restart", &stdout, &stderr);
Gruß
Gerti
- stan23
- Beiträge: 2028
- Registriert: 13.12.2016, 21:14
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Altmühltal
- Hat sich bedankt: 576 Mal
- Danksagung erhalten: 335 Mal
- Kontaktdaten:
Re: RaspberryMatic 3.47.22.20191026 – Erfahrungsberichte
Wenn du es in einer SSH-Session ausführst, dann reicht
Gertis Skript war für Skript testen gedacht.
Code: Alles auswählen
/etc/init.d/S62HMServer restart
Viele Grüße
Marco
RaspberryMatic als VM auf einem NUC mit Proxmox und USB-Funkmodul
~80 Geräte (HM, HmIP, HMW, HBW, AskSin)
Marco
RaspberryMatic als VM auf einem NUC mit Proxmox und USB-Funkmodul
~80 Geräte (HM, HmIP, HMW, HBW, AskSin)