RaspberryMatic 3.51.6.20200229 – Neue Version

[jmaus]

Bitte wie gewünscht
BSM Licht Flur Unten

Sieht alles soweit normal aus. Kann ich mir momentan wirklich nicht erklären warum dir da Kanal 5 angeboten wird und nicht Kanal 4. Entweder übersehe ich da gerade etwas oder es stimmt irgendwo etwas gewaltig nicht. Passiert das denn nur mit dem HmIP-BSM oder auch mit anderen HmIP Geräten? Und wenn ja, mit welchen? Weil ich hab hier leider gerade kein Reserve-BSM parat den ich neu anlernen könnte zum testen.

[opawilli66]

Hallo Jens
Schau bitte mal auf Bild eins da sind auch andere Aktoren betroffen

[opawilli66]

Eine Übersicht welche IP Geräte
HMIP BSM
HMIP FDT
HMIP FSM 16
HMIP Froll
HMIP PCBS
HMIP PS
Die werden anders Angezeigt

[Baxxy]

Die werden anders Angezeigt

Es wäre gut sich erstmal auf ein Gerät zu konzentrieren!
Nehmen wir dein HmIP-BSM "Licht Flur Oben" mit der Seriennummer 00085709A3E897.

Davon bitte ein Screenshot von der DANN --> Geräteauswahl --> Kanalauswahl...
mit gesetztem Filter bei Seriennummer (00085709A3E897) (und nur dort!)
Da ich keinen BSM habe gibt's als Beispiel eine HmIP-PSM.

Ohne "Kindersicherung":

sieht das dann so aus:

Mit "Kindersicherung":

sieht das dann so aus:

Beste Grüße
Baxxy

[opawilli66]

Hallo
Bild 1 Ohne "Kindersicherung"
Bild 2 Mit "Kindersicherung"

[jmaus]

Na dann saß das Problem ja doch wieder hinter dem Bildschirm

[Baxxy]

Hallo
Bild 1 Ohne "Kindersicherung"
Bild 2 Mit "Kindersicherung"

Das sieht für mich alles richtig und vorhanden aus. Was fehlt da jetzt deiner Meinung nach?
Oder war der BSM nicht betroffen?

Grüße
Baxxy

[opawilli66]

Manchmal sieht man den Wald vor lauter Bäumen nicht. Alles wieder gut!
Euch Allen vielen lieben Dank für Eure Hilfe.
Ich Wünsche Euch noch ein schönes Wochenende und bleibt alle gesund.
Gruß Detlef

[Jens_G]

Hallo, ich habe seit ein paar Tagen massive Probleme mit meiner Raspberrymatic (3.51.6.20200229). Nach einer gewissen Zeit „frieren“ die Stati meiner Fenster- und Türöffnungskontakte ein. Ich bin langsam am Verzweifeln und kann mir da keinen Reim drauf machen. Ich habe diverse Hoppe-Enocean Fenstergriffe, die über Cuxd angebunden sind sowie eine handvoll HM-IP Fenstergriffe HM-Sec-RHS. Ich habe am Setup nichts verändert, trotzdem tritt das Phänomen immer wieder auf. Zunächst scheint alles stabil zu laufen, aber nach einiger Zeit (gefühlt so ca. 2 Tage) kommt der freeze. Duty Cycle ist völlig unauffällig. Was könnte ich tun, um dem Problem auf die Schliche zu kommen und es zu lösen?
Vielen Dank für Eure Hilfe und bleibt gesund!

Update: Heute wieder das selbe Problem. Gestern die RM noch einmal komplett neu aufgesetzt, Backup eingespielt und bis heute Nachmittag lief alles stabil. Vorhin dann wieder die ersten Meldungen „Gerätekommunikation gestört“. Verflixt und zugenäht, was ist denn da nur los. Was kann ich noch tun? PS: Wenn ich einen Verbindungstest bei den Geräten mache, kommen folgende Fehlermeldungen:

Apr 6 14:10:59 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:02 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:05 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:09 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:11 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:14 homematic-raspi local0.err ReGaHss: ERROR: no event dp exists for chn id = 10808 [StartCommunicationTest():iseManageChannel.cpp:1341]
Apr 6 14:11:14 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:17 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:20 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:23 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]
Apr 6 14:11:26 homematic-raspi local0.err ReGaHss: ERROR: ScriptRuntimeError: string channels = "";string timestamps = ""; [ExecError():iseESPexec.cpp:12798]

Anbei auch noch die Ausgabe von dmesg:

root@homematic-raspi:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.105 (damato@bilbo) (gcc version 8.3.0 (Buildroot 2019.11.1-02333-gcc1bc83d)) #1 SMP PREEMPT Fri Feb 28 20:56:53 CET 2020
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3d800000
[ 0.000000] On node 0 totalpages: 253952
[ 0.000000] Normal zone: 2232 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 253952 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4c0 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s37004 r8192 d24436 u69632
[ 0.000000] pcpu-alloc: s37004 r8192 d24436 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 251720
[ 0.000000] Kernel command line: dwc_otg.lpm_enable=0 sdhci_bcm2708.enable_llm=0 console=tty2 kgdboc=tty2 scandelay=5 root=PARTUUID=deedbeef-02 ro noswap rootfstype=ext4 elevator=deadline fsck.repair=yes lapic rootwait rootdelay=5 consoleblank=120 logo.nologo quiet loglevel=0 net.ifnames=0 usb-storage.quirks= coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:E1:8E:DC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 empty
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 1015808 bytes of page_ext
[ 0.000000] Memory: 982772K/1015808K available (8192K kernel code, 599K rwdata, 2192K rodata, 1024K init, 827K bss, 24844K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbe800000 - 0xff800000 (1040 MB)
lowmem : 0x80000000 - 0xbe000000 ( 992 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x(ptrval) - 0x(ptrval) (9184 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 600 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 828 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 27337 entries in 81 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000020] Switching to timer-based delay loop, resolution 52ns
[ 0.000286] Console: colour dummy device 80x30
[ 0.000307] console [tty2] enabled
[ 0.000354] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000370] pid_max: default: 32768 minimum: 301
[ 0.000534] Security Framework initialized
[ 0.000544] Yama: becoming mindful.
[ 0.000780] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000798] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001747] CPU: Testing write buffer coherency: ok
[ 0.002256] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.024091] Setting up static identity map for 0x100000 - 0x10003c
[ 0.032085] rcu: Hierarchical SRCU implementation.
[ 0.048160] smp: Bringing up secondary CPUs ...
[ 0.080685] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.112776] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.144900] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.145066] smp: Brought up 1 node, 4 CPUs
[ 0.145079] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.145086] CPU: All CPU(s) started in HYP mode.
[ 0.145093] CPU: Virtualization extensions available.
[ 0.146061] devtmpfs: initialized
[ 0.161320] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.161691] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.161712] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.162323] pinctrl core: initialized pinctrl subsystem
[ 0.163313] NET: Registered protocol family 16
[ 0.167209] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.172547] cpuidle: using governor ladder
[ 0.172588] cpuidle: using governor menu
[ 0.173765] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.173774] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.176806] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.184853] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-01-22 17:25, variant start
[ 0.188870] raspberrypi-firmware soc:firmware: Firmware hash is 53a54c770c493957d99bf49762dfabc4eee00e45
[ 0.228173] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.230108] SCSI subsystem initialized
[ 0.230373] usbcore: registered new interface driver usbfs
[ 0.230433] usbcore: registered new interface driver hub
[ 0.230543] usbcore: registered new device driver usb
[ 0.231450] NetLabel: Initializing
[ 0.231459] NetLabel: domain hash size = 128
[ 0.231466] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.231558] NetLabel: unlabeled traffic allowed by default
[ 0.232784] clocksource: Switched to clocksource arch_sys_counter
[ 0.341084] VFS: Disk quotas dquot_6.6.0
[ 0.341188] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.341407] FS-Cache: Loaded
[ 0.341619] CacheFiles: Loaded
[ 0.341785] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes, mapped to 0x(ptrval)
[ 0.341800] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
[ 0.347980] Console: switching to colour frame buffer device 90x30
[ 0.353681] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered!
[ 0.363586] NET: Registered protocol family 2
[ 0.364432] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.364474] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.364586] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.364824] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.364983] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.365032] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.365289] NET: Registered protocol family 1
[ 0.365978] RPC: Registered named UNIX socket transport module.
[ 0.365987] RPC: Registered udp transport module.
[ 0.365994] RPC: Registered tcp transport module.
[ 0.366001] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.368354] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.372089] Initialise system trusted keyrings
[ 0.372323] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.380928] zbud: loaded
[ 0.382948] FS-Cache: Netfs 'nfs' registered for caching
[ 0.383549] NFS: Registering the id_resolver key type
[ 0.383582] Key type id_resolver registered
[ 0.383589] Key type id_legacy registered
[ 0.383614] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.386432] Key type asymmetric registered
[ 0.386443] Asymmetric key parser 'x509' registered
[ 0.386497] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.386669] io scheduler noop registered
[ 0.386679] io scheduler deadline registered (default)
[ 0.386870] io scheduler cfq registered
[ 0.386880] io scheduler mq-deadline registered (default)
[ 0.386888] io scheduler kyber registered
[ 0.391759] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.393715] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.394108] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.394822] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.406577] brd: module loaded
[ 0.418204] loop: module loaded
[ 0.418971] Loading iSCSI transport class v2.0-870.
[ 0.424248] libphy: Fixed MDIO Bus: probed
[ 0.424352] usbcore: registered new interface driver lan78xx
[ 0.424432] usbcore: registered new interface driver smsc95xx
[ 0.424448] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.424704] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.624939] Core Release: 2.80a
[ 0.624949] Setting default values for core params
[ 0.624976] Finished setting default values for core params
[ 0.825277] Using Buffer DMA mode
[ 0.825285] Periodic Transfer Interrupt Enhancement - disabled
[ 0.825292] Multiprocessor Interrupt Enhancement - disabled
[ 0.825301] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.825312] Dedicated Tx FIFOs mode
[ 0.825641] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = bd904000 dma = 0xfd904000 len=9024
[ 0.825669] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.825678] dwc_otg: Microframe scheduler enabled
[ 0.825736] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.825747] WARN::hcd_init_fiq:458: FIQ ASM at 8066ff18 length 36
[ 0.825759] WARN::hcd_init_fiq:497: MPHI regs_base at be810000
[ 0.825796] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.825830] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.825866] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.825915] Init: Port Power? op_state=1
[ 0.825922] Init: Power Port (0)
[ 0.826209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.826222] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.826233] usb usb1: Product: DWC OTG Controller
[ 0.826244] usb usb1: Manufacturer: Linux 4.19.105 dwc_otg_hcd
[ 0.826254] usb usb1: SerialNumber: 3f980000.usb
[ 0.826917] hub 1-0:1.0: USB hub found
[ 0.826975] hub 1-0:1.0: 1 port detected
[ 0.827643] dwc_otg: FIQ enabled
[ 0.827651] dwc_otg: NAK holdoff enabled
[ 0.827658] dwc_otg: FIQ split-transaction FSM enabled
[ 0.827670] Module dwc_common_port init
[ 0.827918] usbcore: registered new interface driver uas
[ 0.828017] usbcore: registered new interface driver usb-storage
[ 0.828335] mousedev: PS/2 mouse device common for all mice
[ 0.829471] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.829832] bcm2835-cpufreq: min=600000 max=1200000
[ 0.830400] sdhci: Secure Digital Host Controller Interface driver
[ 0.830407] sdhci: Copyright(c) Pierre Ossman
[ 0.830851] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ 0.831318] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.831474] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.835515] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.835567] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.835660] usbcore: registered new interface driver usbhid
[ 0.835664] usbhid: USB HID core driver
[ 0.836205] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.838516] NET: Registered protocol family 17
[ 0.838593] Key type dns_resolver registered
[ 0.839092] Registering SWP/SWPB emulation handler
[ 0.839479] registered taskstats version 1
[ 0.839491] Loading compiled-in X.509 certificates
[ 0.845125] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 53, base_baud = 31250000) is a 16550
[ 0.845435] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.845965] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 0.845983] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 0.870285] sdhost: log_buf @ (ptrval) (fd907000)
[ 0.887915] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.889504] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.891093] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.893966] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.919771] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.922474] of_cfs_init
[ 0.922515] of_cfs_init: OK
[ 0.923505] Waiting 5 sec before mounting root device...
[ 0.971726] random: fast init done
[ 1.011661] mmc1: new high speed SDIO card at address 0001
[ 1.014424] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.017699] mmc0: new high speed SDHC card at address aaaa
[ 1.018716] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
[ 1.021349] mmcblk0: p1 p2 p3
[ 1.048937] Indeed it is in host mode hprt0 = 00021501
[ 1.236833] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.236963] Indeed it is in host mode hprt0 = 00001101
[ 1.445080] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 1.445094] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.445750] hub 1-1:1.0: USB hub found
[ 1.445842] hub 1-1:1.0: 5 ports detected
[ 1.732829] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.833069] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 1.833083] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.835699] smsc95xx v1.0.6
[ 1.896243] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e1:8e:dc
[ 1.972835] usb 1-1.5: new full-speed USB device number 4 using dwc_otg
[ 2.105785] usb 1-1.5: New USB device found, idVendor=0403, idProduct=6010, bcdDevice= 5.00
[ 2.105798] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.105809] usb 1-1.5: Product: FAM V2.4
[ 2.105820] usb 1-1.5: Manufacturer: Eltako GmbH
[ 2.105830] usb 1-1.5: SerialNumber: FT1Y9VCW
[ 2.336829] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 2.437781] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
[ 2.437795] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.437807] usb 1-1.3: Product: Ultra Fit
[ 2.437817] usb 1-1.3: Manufacturer: SanDisk
[ 2.437827] usb 1-1.3: SerialNumber: 4C530000301102118314
[ 2.438583] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.439271] scsi host0: usb-storage 1-1.3:1.0
[ 3.457800] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 3.458710] sd 0:0:0:0: [sda] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 3.459585] sd 0:0:0:0: [sda] Write Protect is off
[ 3.459603] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.460072] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.469228] sda: sda1
[ 3.472372] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.126716] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.126777] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 6.127536] devtmpfs: mounted
[ 6.134031] Freeing unused kernel memory: 1024K
[ 6.134493] Run /sbin/init as init process
[ 6.780906] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[ 6.791478] EXT4-fs (mmcblk0p3): mounted filesystem with journalled data mode. Opts: data=journal
[ 7.029685] i2c /dev entries driver
[ 7.119607] random: crng init done
[ 7.458199] tun: Universal TUN/TAP device driver, 1.6
[ 7.586067] udevd[249]: starting version 3.2.9
[ 7.631129] udevd[254]: starting eudev-3.2.9
[ 7.751986] generic_raw_uart: loading out-of-tree module taints kernel.
[ 7.757516] pl011_raw_uart 3f201000.serial: No valid reset pin configured in device tree
[ 7.757655] pl011_raw_uart 3f201000.serial: Initialized pl011 device; mapbase=0x3f201000; irq=81; clockrate=47999625
[ 7.784690] rtc-rx8130 1-0032: Unable to read registers #28..#30
[ 7.784703] i2c i2c-1: probing for rx8130 failed
[ 7.784735] rtc-rx8130: probe of 1-0032 failed with error -121
[ 7.897220] usbcore: registered new interface driver usbserial_generic
[ 7.897257] usbserial: USB Serial support registered for generic
[ 7.909833] usbcore: registered new interface driver ftdi_sio
[ 7.909880] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 7.910073] ftdi_sio 1-1.5:1.0: FTDI USB Serial Device converter detected
[ 7.910619] usb 1-1.5: Detected FT2232C
[ 7.912133] usb 1-1.5: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7.914591] ftdi_sio 1-1.5:1.1: FTDI USB Serial Device converter detected
[ 7.914705] usb 1-1.5: Detected FT2232C
[ 7.915730] usb 1-1.5: FTDI USB Serial Device converter now attached to ttyUSB1
[ 7.999872] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.024993] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.030895] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 8.030910] cfg80211: failed to load regulatory.db
[ 8.107258] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 8.112184] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.112366] usbcore: registered new interface driver brcmfmac
[ 8.234973] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 8.331794] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.331876] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 8.332502] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 25.183462] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 26.762955] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 28.709254] NET: Registered protocol family 10
[ 28.714878] Segment Routing with IPv6
[ 41.261293] eq3loop: created slave mmd_hmip
[ 41.261613] eq3loop: created slave mmd_bidcos
[ 43.434068] eq3loop: eq3loop_open_slave() mmd_bidcos
[ 59.890071] eq3loop: eq3loop_open_slave() mmd_hmip
[ 59.890265] eq3loop: eq3loop_close_slave() mmd_hmip
[ 59.893828] eq3loop: eq3loop_open_slave() mmd_hmip
[ 59.893959] eq3loop: eq3loop_close_slave() mmd_hmip
[ 59.904139] eq3loop: eq3loop_open_slave() mmd_hmip
root@homematic-raspi:~#

Hat evtl. irgend jemand einen Tipp für mich?

VG

[AndiN]

Hallo,

musste gerade meine Raspberry neu starten und bekomme diese Fehlermeldung im 5 Minuten-Takt

Code: Alles auswählen

Apr  5 13:40:05 Jeanny user.crit kernel: [  796.627527] EXT4-fs error (device mmcblk0p3): ext4_find_entry:1466: inode #263074: comm node: checksumming directory block 0
Apr  5 13:40:05 Jeanny user.crit kernel: [  796.779995] EXT4-fs error (device mmcblk0p3): ext4_find_entry:1466: inode #263074: comm node: checksumming directory block 0
Apr  5 13:40:05 Jeanny user.crit kernel: [  796.895756] EXT4-fs error (device mmcblk0p3): ext4_find_entry:1466: inode #263074: comm node: checksumming directory block 0
Apr  5 13:40:05 Jeanny user.crit kernel: [  797.038971] EXT4-fs error (device mmcblk0p3): ext4_find_entry:1466: inode #263074: comm node: checksumming directory block 0
Apr  5 13:40:05 Jeanny user.crit kernel: [  797.191126] EXT4-fs error (device mmcblk0p3): ext4_find_entry:1466: inode #263074: comm node: checksumming directory block 0

"

Habe jetzt den Stick enfernt in der Hoffnung, dss das damit gemeint ist. Aber ich glaube nicht. vor dem Reboot hatte ich die Meldungen noch nicht. Was bedeuten die Meldungen? Wer kann mir helfen

[edit] Okay. An dem Stick liegt es nicht. Meldung bleibt.... [/edit]

Andi