SD-Karte ... unclean shutdown

Einrichtung, Nutzung und Hilfe zu RaspberryMatic (OCCU auf Raspberry Pi)

Moderatoren: jmaus, Co-Administratoren

Antworten
Benutzeravatar
Bernd-Joras
Beiträge: 732
Registriert: 26.03.2016, 09:33
Hat sich bedankt: 34 Mal
Danksagung erhalten: 40 Mal

SD-Karte ... unclean shutdown

Beitrag von Bernd-Joras » 05.11.2020, 17:04

Hallo, kleine Diskussion bzw. Fragen meinerseits zum eventuellen SD-Karten Fehler bzw. "„unclean shutdown".

Ich möchte hier die Diskussion nicht erneut anfangen „welche ist die beste schnellste haltbarste …

Immer wieder darf/muss ich lesen, dass hier und dort davon gesprochen wird, da könnte die SD Karte ne Macke haben.
Scheinbar bestätigt sich das auch sehr oft …
Nun habe ich auch s.g. „unclean shutdowns“ gehabt, und dann viel getestet.
Die LOG´s (syslog Server), selbst auf "Alles Loggen" gestellt, haben leider keinen Hinweis ergeben.

Eine ½ Jahr alte 16 GB SD-Karte bringt alle 2-3 Tage „unclean shutdowns“ =>

Habe nun eine neue SD-Karte genommen mit gleichem Softwarestand und habe keine „unclean shutdowns“

Ich nehme wieder die ½ Jahr alte 16 GB SD-Karte und habe wieder „unclean shutdowns“
Auch nach dem einspielen unterschiedlicher Backups, habe ich mit dieser SD-Karte immer nach 1-3 Tagen „unclean hutdowns“

Ich teste die ½ Jahr alte 16 GB SD-Karte sehr lange und intensiv ....
Ich kann wirklich nicht einmal ansatzweise erkennen das die ½ Jahr alte 16 GB SD-Karte defekt sein könnte.
Diese funktioniert in diversen Geräten und mit und auf unterschiedlichen Rechnern, mit unterschiedlichsten Tools getestet immer einwandfrei.
Diese Karte hatte also scheinbar nur so wie Sie war, in meinem RPi3B+ mit RaspberryMatic nach einem ½ Jahr Probleme.

Nun aber …

Habe nun die ½ Jahr alte 16 GB SD-Karte wieder geflasht und das Backup eingespielt … bisher, fast 4 Tage keine Fehler … keine „unclean shutdowns“

Kann es sein, dass die vielen vermeintlich als defekt deklarierten SD-Karten durch erneutes Formatieren/Flashen doch wieder funktionieren?
Werden hier vielleicht dann defekte Sektoren auf der SD-Karte nicht mehr benutzt?
Komisch bliebe aber dennoch, ich kann nicht erkennen das die SD-Karten Kapazität, bzw. die Anzahl der Sektoren verringert ist.
Werde die ½ Jahr alte 16 GB SD-Karte jedoch ersteinmal weiterbenutzen bis diese wieder auffällig wird....

Nicht falsch verstehen … Ich könnte auch bei jedem Update eine neue Karte nehmen … es geht mir nicht um Geiz und/oder .... aber verstehen möchte ich es schon.

Vieleicht kann jemand der tiefer in der Materie steckt mir hier etwas erklären ... Danke vorab, Bernd
Zuletzt geändert von Roland M. am 05.11.2020, 18:31, insgesamt 1-mal geändert.
Grund: Thema verschoben
2 Standorte mit je RPi3B+ RaspberryMatic 3.75.7.20240420 / RPI-RF-MOD | Externe USB-Platinen Antenne | 2x LAN_RF_GW | 1x LAN_RS485_GW | ca. 170 Geräte davon 35x IP | ca. 250 Programme |>600 Kanäle | Addons: CUX-Daemon, XML-API, hm_pdetect, E-Mail, CCU-Historian
Nach oben
Benutzeravatar
jmaus
Beiträge: 9862
Registriert: 17.02.2015, 14:45
System: Alternative CCU (auf Basis OCCU)
Wohnort: Dresden
Hat sich bedankt: 464 Mal
Danksagung erhalten: 1880 Mal
Kontaktdaten:
Kontaktdaten von jmaus

Re: SD-Karte ... unclean shutdown

Beitrag von jmaus » 05.11.2020, 17:50

Also stellen wir hier einmal ein paar Sachen/Schlussfolgerungen von dir richtig:

1) Das "unclean shutdown" alleine besagt noch gar nicht das es die SD Karte ist. Das ist nur eine Meldung das dein RaspberryMatic eben unsauber heruntergefahren wurde, also entweder hart vom Strom getrennt wurde oder eben der Pi aus irgendwelchen anderen Gründen hart neugestartet wurde ohne sauber heruntergefahren zu werden. Und dazu kann es durch einen Kernel Crash, Hardware WatchDog oder ähnliches kommen. Und ein Grund wieso es z.B. zu einem Kernel Crash oder Stillstand kommen könnte ist ggf. ein Zugriffsproblem mit dem zugrundeliegenden Medium (in deinem Falle die SD Karte).

2) Die Vermutung liegt jedoch nahe, das es zu diesen "unclean shutdown" Ereignissen bei dir kommt weil nachts RaspberryMatic automatisch einen sogenannten "BadBlocksCheck" durchführt, also das Medium auf etwaige defekte Blöcke oder Zugriffsprobleme prüft. Und wenn das Medium jetzt defekt ist oder ein anderes Problem verursacht das gewisse Blöcke nicht zugreifbar sind dann kann es mitunter passieren das der Kernel eben crasht oder der Hardware WatchDog des auf Grund eine zu langen Stillstandes durch Zugriffsprobleme den RaspberryPi automatisch hart neustarten lässt. Und dadurch kommt es eben wiederum zu dieser "unclean shutdown" Meldung.

Das du nun solche "unclean shutdown" Meldungen hast kann (muss aber nicht) mit einer defekten SD karte zusammenhängen. Dazu müsstest du allerdings erst einmal manuell diesen BadBlocksCheck durchlaufen lassen und beobachten was während des Checks so passiert und ob das wirklich der ausschlaggebende Punkt ist. Als erstes Indiz das das so ist kann man aber auch oft die Uhrzeit heranziehen bei der es zu diesen unerwarteten Neustarts kommt, denn der BadBlocksCheck wird jede nacht um 2:00 früh ausgeführt. Kommt es also um diese Zeit zu einem unerwarteten Neustart liegt es nahe das es genau dieser Check ist der dazu führt das dein Pi sich verabschiedet. Ob das nun aber wiederum an der SD Karte selbst oder an der Verbindung bzw. Interface zwischen SD Karte und Pi liegt wäre auch erst einmal zu prüfen/analysieren und dazu müsste man eben besagten Test einmal manuell laufen lassen dann auf dem HDMI Monitor allerdings beobachten was da konkret in der Konsole so passiert und ausgegeben wird bevor es zum Neustart kommt.

In den meisten Fällen (und daher liegt das nahe) hat es sich allerdings bewahrheitet, das wenn dieser BadBlocksCheck zum Absturz des Pi führt es in der Tat an der SD karte liegt und ein Austausch gegeben ist. Bei dir scheint das ja auch der Fall gewesen zu sein. Daher würde ich dir raten genau so zu verfahren und eine neue/andere SD Karte zu nehmen und weiter zu beobachten.
RaspberryMatic 3.75.7.20240420 @ ProxmoxVE – ~200 Hm-RF/HmIP-RF/HmIPW Geräte + ioBroker + HomeAssistant – GitHub / Sponsors / PayPal / ☕️
Nach oben
Benutzeravatar
Bernd-Joras
Beiträge: 732
Registriert: 26.03.2016, 09:33
Hat sich bedankt: 34 Mal
Danksagung erhalten: 40 Mal

Re: SD-Karte ... unclean shutdown

Beitrag von Bernd-Joras » 05.11.2020, 18:23

Hallo … (Jens) DANKE und OK … Ich verstehe das und bin auch gleicher Meinung …

Aber … in meinem Fall … (das „aber“ bezieht sich nicht auf die Erklärungen von Jens)

- unclean shutdown zu unterschiedlichen Zeiten … und nicht jeden Tag
- unclean shutdown mit der gleichen Hardware (3 RPi3B+ 5 Ampere Netzteil etc.)
- unclean shutdown mit gleicher Version und gleicher Programmierung (immer das gleiche Backup genommen)
- KEIN unclean shutdown mit neuer SD-Karte (gleiche Version und gleicher Programmierung / Backup)
- KEIN unclean shutdown nach dem formatieren und erneutem flaschen der alten SD-Karte.

Möchte damit sagen, ich verstehe es leider immer noch nicht …
Natürlich kann ein unclean shutdown unterschiedlich Ursachen haben …
Bei mir sah es ja auch so aus als ob die SD-Karte schuld sein könnte.

Das Ereignis „unclean shutdown“ konnte ich ja auch mit der alten Karte und unveränderter Software (kein formatieren kein flashen) immer wieder nachstellen. Dann formatiere ich die vermeintlich defekte SD-Karte, flashe diese (gleiche Version) spiele das Backup ein ...
...und nun ist wieder alles gut … Karte scheint wieder zu laufen …
Sprich, mit gleicher Hardware, gleicher SD-Karte gleicher Software … Nun alles gut ?

Ich werde mal schauen wie sich die SD-Karte bzw. das System nun weiter verhält.
2 Standorte mit je RPi3B+ RaspberryMatic 3.75.7.20240420 / RPI-RF-MOD | Externe USB-Platinen Antenne | 2x LAN_RF_GW | 1x LAN_RS485_GW | ca. 170 Geräte davon 35x IP | ca. 250 Programme |>600 Kanäle | Addons: CUX-Daemon, XML-API, hm_pdetect, E-Mail, CCU-Historian
Nach oben
Sven_A
Beiträge: 4156
Registriert: 26.01.2016, 08:14
System: Alternative CCU (auf Basis OCCU)
Wohnort: Renningen
Hat sich bedankt: 348 Mal
Danksagung erhalten: 284 Mal

Re: SD-Karte ... unclean shutdown

Beitrag von Sven_A » 06.11.2020, 08:07

Es kann schon sein das nach einem neuen flashen der Karte nichts mehr in der wackelingen Zelle liegt, oder zumindest nichts wichtiges mehr. Daher könnte es für dich so aussehen als ob alles gut wäre. Auch möglich das die Zelle tatsächlich vom Management des Karte als Defekt markiert wurde und nicht genutzt werden. Dafür gibt es Ersatzzellen, deshalb hat die Karte auch noch die selbe Größe. Trotzdem würde ich bei einem 6 Euro Artikel bei meiner Hausautomatisierung kein Risiko eingehen.
Nach oben
Benutzeravatar
Bernd-Joras
Beiträge: 732
Registriert: 26.03.2016, 09:33
Hat sich bedankt: 34 Mal
Danksagung erhalten: 40 Mal

Re: SD-Karte ... unclean shutdown

Beitrag von Bernd-Joras » 06.11.2020, 14:24

OK ... DANKE vorerst an Euch alle für die Erklärungen und Tips ...

Ich wollte das nun auch abschließen und habe mich entschlossen nur die neue Karte zu nutzen.

Was soll ich sagen ... keine 24h => unclean shutdown! mit der nagelneuen SD-Karte

OK, der SYSLOG lief ..... anbei einmal die letzten ca. 200 Einträge bis zum reboot ... ganz unten dann der "unclean shutdown"
Kann einer von Euch da etwas erkennen was schuld sein könnte ...

Code: Alles auswählen

00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 7 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 2, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 3, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 4, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 5, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 5, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 4, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 5, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 6, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 6, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 7, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: Rule evaluated state is TRUE by Program ID = 4182 '-SVP_FEHLER_STOERUNG_SABO'; Destination ID = 7386 [SetState():iseDOMPrg.cpp:509]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: break execute for Program ID = 4182 '-SVP_FEHLER_STOERUNG_SABO', rule's trigger flags = 0 [SetState():iseDOMPrg.cpp:530]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: called Program ID = 2081 'DutyCycle-groeßer-25-Mail' with valNew = '1.000000' ; oidTrigger = 2477 [SetState():iseDOMPrg.cpp:483]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 252 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: Rule evaluated state is FALSE by Program ID = 2081 'DutyCycle-groeßer-25-Mail' [SetState():iseDOMPrg.cpp:536]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: called Program ID = 58003 'DutyCycle-groeßer-50-Mail' with valNew = '1.000000' ; oidTrigger = 2477 [SetState():iseDOMPrg.cpp:483]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: Rule evaluated state is FALSE by Program ID = 58003 'DutyCycle-groeßer-50-Mail' [SetState():iseDOMPrg.cpp:536]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 700 bytes by web server #2 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8593 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8532 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8557 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8748 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8717 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8732 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: called Program ID = 4182 '-SVP_FEHLER_STOERUNG_SABO' with valNew = '2.000000' ; oidTrigger = 2478 [SetState():iseDOMPrg.cpp:483]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1078]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 2 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 4, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 1, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 7 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 7 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 7 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #2 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 2, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 653 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 3, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8593 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 4, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8532 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8557 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8748 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8717 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8732 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 5, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 5, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 4, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 5, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 6, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 6, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 7, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: Rule evaluated state is TRUE by Program ID = 4182 '-SVP_FEHLER_STOERUNG_SABO'; Destination ID = 7386 [SetState():iseDOMPrg.cpp:509]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: break execute for Program ID = 4182 '-SVP_FEHLER_STOERUNG_SABO', rule's trigger flags = 0 [SetState():iseDOMPrg.cpp:530]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: called Program ID = 2081 'DutyCycle-groeßer-25-Mail' with valNew = '2.000000' ; oidTrigger = 2478 [SetState():iseDOMPrg.cpp:483]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: Rule evaluated state is FALSE by Program ID = 2081 'DutyCycle-groeßer-25-Mail' [SetState():iseDOMPrg.cpp:536]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: called Program ID = 58003 'DutyCycle-groeßer-50-Mail' with valNew = '2.000000' ; oidTrigger = 2478 [SetState():iseDOMPrg.cpp:483]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: Rule evaluated state is FALSE by Program ID = 58003 'DutyCycle-groeßer-50-Mail' [SetState():iseDOMPrg.cpp:536]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: called Program ID = 4182 '-SVP_FEHLER_STOERUNG_SABO' with valNew = '6.000000' ; oidTrigger = 2479 [SetState():iseDOMPrg.cpp:483]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1078]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 608 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8593 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8532 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8557 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8788 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8804 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 2 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 8748 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 4, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 1, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 7 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 7 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 7 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 2, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 3, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 4, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 75.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 5, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 5, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 3, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 4, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 5, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 6, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 6, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = 1, condition valL = 0 valR1 = 1 [Evaluate():iseCondition.cpp:392]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 7, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: Rule evaluated state is TRUE by Program ID = 4182 '-SVP_FEHLER_STOERUNG_SABO'; Destination ID = 7386 [SetState():iseDOMPrg.cpp:509]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: break execute for Program ID = 4182 '-SVP_FEHLER_STOERUNG_SABO', rule's trigger flags = 0 [SetState():iseDOMPrg.cpp:530]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: called Program ID = 2081 'DutyCycle-groeßer-25-Mail' with valNew = '6.000000' ; oidTrigger = 2479 [SetState():iseDOMPrg.cpp:483]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 25.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: Rule evaluated state is FALSE by Program ID = 2081 'DutyCycle-groeßer-25-Mail' [SetState():iseDOMPrg.cpp:536]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: called Program ID = 58003 'DutyCycle-groeßer-50-Mail' with valNew = '6.000000' ; oidTrigger = 2479 [SetState():iseDOMPrg.cpp:483]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, trigger dp exists  [CheckCondition2Data():iseCondition.cpp:528]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 6.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseCondition.cpp:1116]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 1.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 1, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: DP_VALUE_CHECK_CHANGE is set, but dp is not the trigger, condition = 1 [CheckCondition2Data():iseCondition.cpp:547]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_GREATEROREQUAL, condition valL = 2.000000 valR1 = 50.000000 [Evaluate():iseCondition.cpp:324]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 2, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, CONDITION_TRIGGER_EXECUTE is reset. [Evaluate():iseRule.cpp:227]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: c = 0, condition result = 0 [Evaluate():iseRule.cpp:235]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: Rule evaluated state is FALSE by Program ID = 58003 'DutyCycle-groeßer-50-Mail' [SetState():iseDOMPrg.cpp:536]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:00+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:03+01:00 homematic-raspi.fritz.box multimac: C<: #183 TRX GetDutyCycle
2020-11-06T09:57:03+01:00 homematic-raspi.fritz.box multimac: C< @1043575772: bin:FD 00 03 01 B7 03 2A 17
2020-11-06T09:57:03+01:00 homematic-raspi.fritz.box multimac: C> @1043575875: #183 TRX Response Ack 0D
2020-11-06T09:57:03+01:00 homematic-raspi.fritz.box multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 6.5, 6.5 ) = 0
2020-11-06T09:57:03+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:03+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:03+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:03+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:05+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:05+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:05+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:05+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:06+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:06+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:06+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:06+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:7"."INFO"="192.168.5.131" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5091 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.131 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:7"."IP"="192.168.5.131" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5091 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.131 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:7"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5091 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:07+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box hs485d: PlatformInit()
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box hs485d: BidCos-Wired support event
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box hs485d: BidCos-Wired support listDevices
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box hs485d: BidCos-Wired support newDevices
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box hs485d: BidCos-Wired support deleteDevices
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box hs485d: BidCos-Wired support updateDevice
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box hs485d: BidCos-Wired support system.multicall
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box hs485d: BidCos-Wired support system.listMethods
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 125 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /index.htm [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 3252 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:08+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:1"."INFO"="192.168.5.111" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4790 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.111 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:1"."IP"="192.168.5.111" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4790 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.111 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:1"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4790 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:3"."INFO"="192.168.5.113" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5063 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.113 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:3"."IP"="192.168.5.113" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5063 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.113 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:3"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5063 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:09+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:10+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:10+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:10+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:10+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:11+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:11+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:11+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:11+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:12+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:12+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 835 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:12+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:12+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box multimac: C<: #184 TRX GetDutyCycle
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box multimac: C< @1043585772: bin:FD 00 03 01 B8 03 08 17
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:4"."INFO"="192.168.5.1" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5070 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.1 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:4"."IP"="192.168.5.1" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5070 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.1 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:4"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5070 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box multimac: C> @1043585877: #184 TRX Response Ack 0D
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 6.5, 6.5 ) = 0
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:13+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:2"."INFO"="192.168.5.112" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5055 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.112 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:2"."IP"="192.168.5.112" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5055 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.112 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:2"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5055 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:14+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:5"."INFO"="192.168.5.2" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5077 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.2 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:5"."IP"="192.168.5.2" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5077 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.2 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:5"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5077 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:15+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:16+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:16+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:16+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:16+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:16+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:16+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:16+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:16+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:19+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:19+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:19+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:19+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:21+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:21+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:21+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:21+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:22+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:22+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:22+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:22+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:23+01:00 homematic-raspi.fritz.box multimac: C<: #185 TRX GetDutyCycle
2020-11-06T09:57:23+01:00 homematic-raspi.fritz.box multimac: C< @1043595772: bin:FD 00 03 01 B9 03 8E 14
2020-11-06T09:57:23+01:00 homematic-raspi.fritz.box multimac: C> @1043595877: #185 TRX Response Ack 0D
2020-11-06T09:57:23+01:00 homematic-raspi.fritz.box multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 6.5, 6.5 ) = 0
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box multimac: C> @1043597580: #8 HMIP CMD=07  56 10 00 8E 70 86 76 B9 0A 3D 00 07 D7 9B 88 9C 30 01 81 C5 01 0F
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box multimac: A<: #69 HMIP CMD=07  56 10 00 8E 70 86 76 B9 0A 3D 00 07 D7 9B 88 9C 30 01 81 C5 01 0F
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box multimac: A>: #197 HMIP CMD=03  00 10 00 8E B9 0A 3D 70 86 76 02 C5 00
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box multimac: MacController::OnDownstreamFrame(#197 HMIP CMD=03  00 10 00 8E B9 0A 3D 70 86 76 02 C5 00)
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box multimac: C<: #186 HMIP CMD=03  00 10 00 8E B9 0A 3D 70 86 76 02 C5 00
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box multimac: C< @1043597587: bin:FD 00 10 02 BA 03 00 10 00 8E B9 0A 3D 70 86 76 02 C5 00 BE AA
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="0001D709903EB9:0"."CONFIG_PENDING"=false [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5304 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5303 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_EXACTVALUE, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:352]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="0001D709903EB9:0"."UNREACH"=false [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5304 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5303 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: type = DP_EXACTVALUE, condition valL = 1 valR1 = 0 [Evaluate():iseCondition.cpp:352]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: sc = 0, condition result = 0 [Evaluate():iseCondition.cpp:1123]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="0001D709903EB9:0"."RSSI_DEVICE"=-86 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5304 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5303 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 170 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box multimac: C> @1043597728: #186 HMIP CMD=06  01
2020-11-06T09:57:24+01:00 homematic-raspi.fritz.box multimac: A<: #197 HMIP CMD=06  01
2020-11-06T09:57:25+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:25+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:25+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:25+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 125 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /index.htm [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 3252 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:26+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:28+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:28+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:28+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:28+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:30+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:30+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 62 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:30+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:30+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:31+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:31+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:31+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:31+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:31+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:31+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:31+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:31+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:33+01:00 homematic-raspi.fritz.box multimac: C<: #187 TRX GetDutyCycle
2020-11-06T09:57:33+01:00 homematic-raspi.fritz.box multimac: C< @1043605772: bin:FD 00 03 01 BB 03 02 17
2020-11-06T09:57:33+01:00 homematic-raspi.fritz.box multimac: C> @1043605876: #187 TRX Response Ack 0D
2020-11-06T09:57:33+01:00 homematic-raspi.fritz.box multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 6.5, 6.5 ) = 0
2020-11-06T09:57:34+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:34+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:34+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:34+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:36+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:36+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:36+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:36+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:37+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:37+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:37+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:37+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:7"."INFO"="192.168.5.131" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5091 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.131 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:7"."IP"="192.168.5.131" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5091 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.131 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:7"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5091 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:38+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:1"."INFO"="192.168.5.111" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4790 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.111 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:1"."IP"="192.168.5.111" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4790 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.111 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:1"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4790 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:3"."INFO"="192.168.5.113" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5063 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.113 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:3"."IP"="192.168.5.113" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5063 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.113 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:3"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5063 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:40+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:41+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:41+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:41+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:41+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:42+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:42+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 835 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:42+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:42+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:43+01:00 homematic-raspi.fritz.box multimac: C<: #188 TRX GetDutyCycle
2020-11-06T09:57:43+01:00 homematic-raspi.fritz.box multimac: C< @1043615772: bin:FD 00 03 01 BC 03 90 14
2020-11-06T09:57:43+01:00 homematic-raspi.fritz.box multimac: C> @1043615876: #188 TRX Response Ack 0D
2020-11-06T09:57:43+01:00 homematic-raspi.fritz.box multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 6.5, 6.5 ) = 0
2020-11-06T09:57:43+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:43+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:43+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:43+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:4"."INFO"="192.168.5.1" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5070 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.1 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:4"."IP"="192.168.5.1" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5070 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.1 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:4"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5070 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 125 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /index.htm [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: flag is set to = 1 from Line = 3252 [SetDOMModifiedFlag():iseESPexec.cpp:13546]
2020-11-06T09:57:44+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:2"."INFO"="192.168.5.112" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5055 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.112 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:2"."IP"="192.168.5.112" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5055 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.112 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:2"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5055 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:45+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:5"."INFO"="192.168.5.2" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5077 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.2 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:5"."IP"="192.168.5.2" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5077 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.2 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:5"."UNREACH_CTR"=0 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5077 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 0 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:46+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:47+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:47+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:47+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:47+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:49+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:49+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:49+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:49+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box multimac: C> @1043625048: #194 LLMAC RX @18858ms -60dBm 19 86 70 41 79 E8 00 00 00 00 60 54
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box multimac: Bidcos RX: #19[BC|Ren|WMup] 4179E8->000000 WeatherData: 00 60 54
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box multimac: GetAckActionForIncomingTelegram(): Unknown peer, AckAction_NotForUs
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box multimac: A<: #208 HmBidcos RxTelegram AuthNone #19[BC|Ren|WMup] 4179E8->000000 WeatherData: 00 60 54
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: RX for MEQ1601327: @2630270906 RSSI=-41dB 0x4179E8 -> 0x000000 WEATHER [OEQ0329114]:#012  CNT=25,RPTEN=1,RPTED=0,BIDI=0,BURST=0,WAKEUP=0,WAKEMEUP=1,BCAST=1,TYPE=0x70#012  LOWBAT = 0#012  TEMP = 96#012  HUMIDITY = 84#012  RAINING = 0#012  RAINCNT = 0#012  WINDSPEED = 0#012  WINDDIR = 0#012  WINDDIR_RANGE = 0#012  BRIGHTNESS = 0
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: Event: MEQ1601327:1.TEMPERATURE=9.600000
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send 1 events
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: Event: MEQ1601327:1.HUMIDITY=84
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send completed
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send 1 events
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="MEQ1601327:1"."TEMPERATURE"=9.600000 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 30998 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 30978 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 9.600000 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send completed
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send 1 events
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="MEQ1601327:1"."HUMIDITY"=84 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 30998 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 30978 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 84 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send completed
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send 1 events
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send completed
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send 1 events
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box rfd: HSSXmlRpcEventDispatcher::Handle send completed
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 741 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@QL91v08Bl4@&action=UpdateUI [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [spawnNewProcess():httpListener.cpp:208]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: recvd 326 bytes by web server #1 [ThreadFunction():httpServer.cpp:797]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [GetSessionId():iseSession.cpp:185]
2020-11-06T09:57:52+01:00 homematic-raspi.fritz.box ReGaHss: Info: http id #1 sends parsed file [ParseFileAndSendWebResponse():httpServer.cpp:2079]
2020-11-06T09:57:53+01:00 homematic-raspi.fritz.box multimac: C<: #189 TRX GetDutyCycle
2020-11-06T09:57:53+01:00 homematic-raspi.fritz.box multimac: C< @1043625772: bin:FD 00 03 01 BD 03 16 17
2020-11-06T09:57:53+01:00 homematic-raspi.fritz.box multimac: C> @1043625877: #189 TRX Response Ack 0D
2020-11-06T09:57:53+01:00 homematic-raspi.fritz.box multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 6.5, 6.5 ) = 0
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:6"."INFO"="192.168.5.100" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5084 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.100 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:6"."IP"="192.168.5.100" [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5084 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 192.168.5.100 [execute():iseXmlRpc.cpp:364]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Info: Event="CUX2803001:6"."UNREACH_CTR"=255 [execute():iseXmlRpc.cpp:321]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 5084 [SetLastDPActionTime():iseDOMchn.h:288]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: call on change; id = 4788 [SetLastActionTime():iseDOMdev.h:225]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: wait max timeout = 240000 [ThreadFunction():iseRTEvent.cpp:69]
2020-11-06T09:57:54+01:00 homematic-raspi.fritz.box ReGaHss: Verbose: UpdateValue succeeded; val = 255 [execute():iseXmlRpc.cpp:364]


unclean shutdown   xxxxxxx  unclean shutdown  xxxxxxx unclean shutdown   xxxxxxx  unclean shutdown 


2020-11-06T10:58:38+01:00 homematic-raspi.fritz.box kernel: [   20.853780] NET: Registered protocol family 10
2020-11-06T10:58:38+01:00 homematic-raspi.fritz.box kernel: [   20.867092] Segment Routing with IPv6
2020-11-06T10:58:39+01:00 homematic-raspi.fritz.box firewall: configuration set
2020-11-06T10:58:39+01:00 homematic-raspi.fritz.box rfkill: block set for type wlan
2020-11-06T10:58:39+01:00 homematic-raspi.fritz.box ifplugd(eth0)[717]: ifplugd 0.28 initializing.
2020-11-06T10:58:39+01:00 homematic-raspi.fritz.box ifplugd(eth0)[717]: Using interface eth0/B8:27:EB:27:50:FA with driver <lan78xx> (version: )
2020-11-06T10:58:39+01:00 homematic-raspi.fritz.box ifplugd(eth0)[717]: Using detection mode: SIOCETHTOOL
2020-11-06T10:58:39+01:00 homematic-raspi.fritz.box ifplugd(eth0)[717]: Initialization complete, link beat detected.
Echt jetzt mal .... DANKE vorab .... Bernd
2 Standorte mit je RPi3B+ RaspberryMatic 3.75.7.20240420 / RPI-RF-MOD | Externe USB-Platinen Antenne | 2x LAN_RF_GW | 1x LAN_RS485_GW | ca. 170 Geräte davon 35x IP | ca. 250 Programme |>600 Kanäle | Addons: CUX-Daemon, XML-API, hm_pdetect, E-Mail, CCU-Historian
Nach oben
Benutzeravatar
jmaus
Beiträge: 9862
Registriert: 17.02.2015, 14:45
System: Alternative CCU (auf Basis OCCU)
Wohnort: Dresden
Hat sich bedankt: 464 Mal
Danksagung erhalten: 1880 Mal
Kontaktdaten:
Kontaktdaten von jmaus

Re: SD-Karte ... unclean shutdown

Beitrag von jmaus » 06.11.2020, 14:30

Bernd-Joras hat geschrieben: ↑
06.11.2020, 14:24
 Kann einer von Euch da etwas erkennen was schuld sein könnte ...
Nein, denn aus den Logfiles lässt sich sowas nicht rauslesen weil solch ein "unclean shutdown" event eben dadurch resultiert das der Rechner eben unerwartet nhart eustartet oder vom strom getrennt wird und wenn das passiert kann der Rechner (der Pi/Tinkerboard) folgerichtig natürlich nichts mehr loggen oder auch an einen externen syslog-server schicken, da er ja in der Sekunde tot ist. Das einzige was du machen kannst ist ein Monitor anschliessen und beobachten. Und wenn das nicht geht (weil du natürlich nicht 10 Std. vor dem Monitor warten kannst) musst du halt suksessive die Hardware tauschen bis sich ruhe einstellt.
RaspberryMatic 3.75.7.20240420 @ ProxmoxVE – ~200 Hm-RF/HmIP-RF/HmIPW Geräte + ioBroker + HomeAssistant – GitHub / Sponsors / PayPal / ☕️
Nach oben
Benutzeravatar
Bernd-Joras
Beiträge: 732
Registriert: 26.03.2016, 09:33
Hat sich bedankt: 34 Mal
Danksagung erhalten: 40 Mal

Re: SD-Karte ... unclean shutdown

Beitrag von Bernd-Joras » 06.11.2020, 14:36

OK, ich habs befürchtet ..... dann tausche ich mal als erstes das Netzteil dann ggf. den RPi3B+ ....
Melde mich hier wieder wenn ich etwas rausgefunden habe ...

Jens, Sven_A => DANKE
2 Standorte mit je RPi3B+ RaspberryMatic 3.75.7.20240420 / RPI-RF-MOD | Externe USB-Platinen Antenne | 2x LAN_RF_GW | 1x LAN_RS485_GW | ca. 170 Geräte davon 35x IP | ca. 250 Programme |>600 Kanäle | Addons: CUX-Daemon, XML-API, hm_pdetect, E-Mail, CCU-Historian
Nach oben
Benutzeravatar
jmaus
Beiträge: 9862
Registriert: 17.02.2015, 14:45
System: Alternative CCU (auf Basis OCCU)
Wohnort: Dresden
Hat sich bedankt: 464 Mal
Danksagung erhalten: 1880 Mal
Kontaktdaten:
Kontaktdaten von jmaus

Re: SD-Karte ... unclean shutdown

Beitrag von jmaus » 06.11.2020, 14:50

Bernd-Joras hat geschrieben: ↑
06.11.2020, 14:36
 OK, ich habs befürchtet ..... dann tausche ich mal als erstes das Netzteil dann ggf. den RPi3B+ ....
Melde mich hier wieder wenn ich etwas rausgefunden habe ...

Jens, Sven_A => DANKE
Ich würde erst einmal bei der SD Karte bleiben als mögliche Ursache. Vielleicht mal einen anderen Typ, Hersteller, etc. Denn es kann auch gut sein das das abschmieren in der Nacht durch den BadBlocksCheck vllt. damit zu tun hat das dieser SD Kartentype suboptimal mit einem RaspberryPi zusammenarbeitet.
RaspberryMatic 3.75.7.20240420 @ ProxmoxVE – ~200 Hm-RF/HmIP-RF/HmIPW Geräte + ioBroker + HomeAssistant – GitHub / Sponsors / PayPal / ☕️
Nach oben
Benutzeravatar
Bernd-Joras
Beiträge: 732
Registriert: 26.03.2016, 09:33
Hat sich bedankt: 34 Mal
Danksagung erhalten: 40 Mal

Re: SD-Karte ... unclean shutdown

Beitrag von Bernd-Joras » 06.11.2020, 15:33

Hallo Jens, Danke für Deine Tips ... Ich Probieren nun gerne nochmal eine neue Karte ... muss ich aber erst bestellen.
Hatte es aber schon mit einer neuen "SanDisk MAX ENDURANCE microSD-Karte 32GB" und einer neuen "Samsung EVO Plus Micro SDHC 32GB" probiert.

Beide (neuen) Karten und auch die alte, haben nach dem "unclean shutdown" in diversen Geräten und bei diversen Test keine Fehler gezeigt.
Da ich nun sowieso ersteinmal eine andere neue SD-Karte bestellen möchte, nutze ich die Zeit für ein Netzteil Austausch.

Ich denke ... Du kannst es nicht mehr hören .... da gibt man einem guten Tips .... Erfahrungen ... und der glaubt es einfach nicht.
SORRY => aber drei Karten defekt ... "unclean shutdown nicht in der Nacht .... immer andere Uhrzeiten ... ne sorry darf einfach nicht sein :roll:

Ich werde berichten ... kann aber dauern ... liegen teilweise ja drei Tage zwischen den "unclean shutdown´s"
2 Standorte mit je RPi3B+ RaspberryMatic 3.75.7.20240420 / RPI-RF-MOD | Externe USB-Platinen Antenne | 2x LAN_RF_GW | 1x LAN_RS485_GW | ca. 170 Geräte davon 35x IP | ca. 250 Programme |>600 Kanäle | Addons: CUX-Daemon, XML-API, hm_pdetect, E-Mail, CCU-Historian
Nach oben
Benutzeravatar
jmaus
Beiträge: 9862
Registriert: 17.02.2015, 14:45
System: Alternative CCU (auf Basis OCCU)
Wohnort: Dresden
Hat sich bedankt: 464 Mal
Danksagung erhalten: 1880 Mal
Kontaktdaten:
Kontaktdaten von jmaus

Re: SD-Karte ... unclean shutdown

Beitrag von jmaus » 07.11.2020, 08:41

Wenn deine Tests nicht erfolgreich verlaufen könntest du ja auch mal überlegen (wenn du dich traust) eine aktuelle nightly build snapshot von RM zu installieren. In der aktuellsten Version habe ich im Linux Kernel nochmal ein paar Optimierungen vorgenommen die sich auf die Stabilität positiv auswirken könnten. Vielleicht löst das ja dann ggf dein Problem.
RaspberryMatic 3.75.7.20240420 @ ProxmoxVE – ~200 Hm-RF/HmIP-RF/HmIPW Geräte + ioBroker + HomeAssistant – GitHub / Sponsors / PayPal / ☕️
Nach oben
Antworten

Zurück zu „RaspberryMatic“