ReGaHss: ERROR: XMLRPC

Einrichtung, Nutzung und Hilfe zu RaspberryMatic (OCCU auf Raspberry Pi)

Moderatoren: jmaus, Co-Administratoren

Antworten
mbhomie007
Beiträge: 160
Registriert: 13.02.2018, 19:23
System: Alternative CCU (auf Basis OCCU)
Hat sich bedankt: 15 Mal
Danksagung erhalten: 1 Mal

ReGaHss: ERROR: XMLRPC

Beitrag von mbhomie007 » 12.11.2020, 17:45

Hallo zusammen,

ich bekomme bei jeden Neustart folgende ERROR Meldungen und WARNUNGEN im LOG:

Findet er das Gateway nicht? :?:

Code: Alles auswählen

Nov 12 17:17:58 Homematic-CCU daemon.info cuxd[785]: write interface(1) 'BidCos-RF' to /usr/local/etc/config/InterfacesList.xml
Nov 12 17:17:58 Homematic-CCU daemon.info cuxd[785]: write interface(2) 'VirtualDevices' to /usr/local/etc/config/InterfacesList.xml
Nov 12 17:17:58 Homematic-CCU daemon.info cuxd[785]: write interface(3) 'HmIP-RF' to /usr/local/etc/config/InterfacesList.xml
Nov 12 17:17:58 Homematic-CCU daemon.info cuxd[785]: write interface(4) 'BidCos-Wired' to /usr/local/etc/config/InterfacesList.xml
Nov 12 17:17:58 Homematic-CCU daemon.info cuxd[785]: write interface(5) 'CUxD' to /usr/local/etc/config/InterfacesList.xml
Nov 12 17:17:58 Homematic-CCU user.info root: Updating RF Lan Gateway Coprocessor Firmware
Nov 12 17:17:58 Homematic-CCU user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Nov 12 17:17:58 Homematic-CCU user.info root: Updating RF Lan Gateway Firmware
Nov 12 17:17:58 Homematic-CCU user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Nov 12 17:17:58 Homematic-CCU user.info root: Updating Wired Lan Gateway Firmware
Nov 12 17:17:58 Homematic-CCU user.info update-lgw-firmware: LAN Gateway Firmware Update...
Nov 12 17:17:58 Homematic-CCU user.info update-lgw-firmware: Gateway OEQ0480707
Nov 12 17:18:00 Homematic-CCU user.info update-lgw-firmware: Gateway type is eQ3-HMW-LGW-App
Nov 12 17:18:00 Homematic-CCU user.info update-lgw-firmware: Available Firmware Version:   1.0.5
Nov 12 17:18:00 Homematic-CCU user.info update-lgw-firmware: Lan Gateway Firmware Version: 1.0.5
Nov 12 17:18:00 Homematic-CCU user.info update-lgw-firmware: Firmware is up to date
Nov 12 17:18:00 Homematic-CCU user.info kernel: [   32.952841] eq3loop: created slave mmd_hmip
Nov 12 17:18:00 Homematic-CCU user.info kernel: [   32.953873] eq3loop: created slave mmd_bidcos
Nov 12 17:18:02 Homematic-CCU user.info kernel: [   35.101089] eq3loop: eq3loop_open_slave() mmd_bidcos
Nov 12 17:18:31 Homematic-CCU user.info kernel: [   63.797555] eq3loop: eq3loop_open_slave() mmd_hmip
Nov 12 17:18:31 Homematic-CCU user.info kernel: [   63.797779] eq3loop: eq3loop_close_slave() mmd_hmip
Nov 12 17:18:31 Homematic-CCU user.info kernel: [   63.810974] eq3loop: eq3loop_open_slave() mmd_hmip
Nov 12 17:18:40 Homematic-CCU daemon.warn cuxd[785]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Nov 12 17:18:43 Homematic-CCU daemon.warn cuxd[785]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Nov 12 17:18:46 Homematic-CCU user.info homematic: meine-homematic.de loophammer startet openvpn.
Nov 12 17:18:47 Homematic-CCU daemon.warn openvpn[1189]: WARNING: file '/usr/local/etc/config/addons/mh/client.key' is group or others accessible
Nov 12 17:18:47 Homematic-CCU daemon.warn openvpn[1190]: WARNING: --ns-cert-type is DEPRECATED.  Use --remote-cert-tls instead
ERROR und WARNUNGEN
Nur einige als Beispiel, es sind hunderte...

Code: Alles auswählen

Nov 12 17:19:00 Homematic-CCU local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00109709AXXXXX:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov 12 17:19:00 Homematic-CCU local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00109XXXXX9:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov 12 17:19:00 Homematic-CCU local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov 12 17:19:00 Homematic-CCU local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0010XXxXXX64F:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov 12 17:19:00 Homematic-CCU local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"001097XXxXXX4F:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov 12 17:19:00 Homematic-CCU local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov 12 17:19:00 Homematic-CCU local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00109XXXxXx30:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov 12 17:19:00 Homematic-CCU local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"0010XXXXXXX:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov 12 17:19:00 Homematic-CCU local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov 12 17:19:01 Homematic-CCU local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000BDXXXXX:1","MOTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: MOTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov 12 17:19:01 Homematic-CCU local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"000XXXXXXX0:1","MOTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov 12 17:19:01 Homematic-CCU local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov 12 17:19:01 Homematic-CCU local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000BD5XxxXXX:1","MOTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: MOTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov 12 17:19:01 Homematic-CCU local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"000BDXXXXXX61:1","MOTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov 12 17:19:01 Homematic-CCU local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov 12 17:19:53 Homematic-CCU local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A9XXXXXX4:1","PARTY_TIME_START"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov 12 17:19:53 Homematic-CCU local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"000XXXXXXXXX4:1","PARTY_TIME_START"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov 12 17:19:53 Homematic-CCU local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]

Code: Alles auswählen

Nov 12 17:19:54 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] values saved to /usr/local/addons/redmatic/var/ccu_values_localhost.json
Nov 12 17:19:54 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] Interfaces: ReGaHSS, BidCos-RF, HmIP-RF, VirtualDevices
Nov 12 17:19:54 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] Interface ReGaHSS connected
Nov 12 17:19:54 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] init BidCos-RF binrpc://127.0.0.1:2047 nr_AKHydZ_BidCos-RF
Nov 12 17:19:54 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] init HmIP-RF http://127.0.0.1:2048 nr_D24DjW_HmIP-RF
Nov 12 17:19:54 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] init VirtualDevices http://127.0.0.1:2048 nr_D24DjW_VirtualDevices
Nov 12 17:19:55 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] binrpc server listening on binrpc://127.0.0.1:2047
Nov 12 17:19:55 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] xmlrpc server listening on http://127.0.0.1:2048
Nov 12 17:19:55 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] Interface HmIP-RF http port 32010 connected
Nov 12 17:19:55 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] Interface VirtualDevices http port 39292 connected
Nov 12 17:19:55 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] Interface BidCos-RF binrpc port 32001 connected
Nov 12 17:19:56 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] metadata saved to /usr/local/addons/redmatic/var/ccu_localhost.json
Nov 12 17:19:57 Homematic-CCU daemon.info node-red[1531]: [ccu-connection:localhost] regadata saved to /usr/local/addons/redmatic/var/ccu_rega_localhost.json
Nov 12 17:20:01 Homematic-CCU user.err monit[1556]: 'wlan0CheckEnabled' status failed (1) -- no output
Nov 12 17:20:06 Homematic-CCU user.info monit[1556]: 'redmatic-diskusage' monitor on user request
Nov 12 17:20:06 Homematic-CCU user.info monit[1556]: 'redmatic-nodered' monitor on user request
Nov 12 17:20:06 Homematic-CCU user.info monit[1556]: Monit daemon with PID 1556 awakened
Nov 12 17:20:06 Homematic-CCU user.info monit[1556]: Awakened by User defined signal 1
Nov 12 17:20:06 Homematic-CCU user.info monit[1556]: 'redmatic-nodered' monitor action done
Nov 12 17:20:06 Homematic-CCU user.info monit[1556]: 'redmatic-diskusage' monitor action done
Nov 12 17:20:08 Homematic-CCU daemon.info chronyd[671]: Selected source 51.75.67.47
/etc/config/rfd.conf

Warum CCU2? :?:

Code: Alles auswählen

# TCP Port for XmlRpc connections
Listen Port = 2001

Log Destination = Syslog
Log Identifier = rfd
Log Level = 1

Persist Keys = 1

# PID File = /var/rfd.pid
# UDS File = /var/socket_rfd

Device Description Dir = /firmware/rftypes
Device Files Dir = /etc/config/rfd
Key File = /etc/config/keys
Address File = /etc/config/ids
Firmware Dir = /firmware
Replacemap File = /firmware/rftypes/replaceMap/rfReplaceMap.xml
Fire NACK Error Events = true
















Improved Coprocessor Initialization = true

[Interface 0]
Type = CCU2
ComPortFile = /dev/mmd_bidcos
AccessFile = /dev/null
ResetFile = /dev/null

Die Meldungen sind unmittelbar/während des Rasberry 3b+ Starts.
Von JEDEM Homematic Gerät kommen Meldungen, hunderte Meldungen insgesamt.
Wenn die RaspberryMatic gestartet hat, kommen nach einiger Zeit keine Meldungen mehr.

Kann jemand helfen?

Viele Grüße
Marco

Baxxy
Beiträge: 2092
Registriert: 18.12.2018, 15:45
System: Alternative CCU (auf Basis OCCU)
Hat sich bedankt: 181 Mal
Danksagung erhalten: 296 Mal

Re: ReGaHss: ERROR: XMLRPC

Beitrag von Baxxy » 12.11.2020, 17:50

mbhomie007 hat geschrieben:
12.11.2020, 17:45
Kann jemand helfen?
Schau nicht hin. Das ist bei jedem nach dem Neustart so. Und dann nochmal wenn man z.B. mit TinyMatic zugreift.

Nur so komische große Xe kommen bei mir nicht. :wink:

Code: Alles auswählen

Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00105BE98B23BD:0","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00105BE98B23BD:0","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00105BE98B23BD:0","ERROR_CODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ERROR_CODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00105BE98B23BD:0","ERROR_CODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00105BE98B23BD:0","ERROR_OVERHEAT"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ERROR_OVERHEAT"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00105BE98B23BD:0","ERROR_OVERHEAT"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00105BE98B23BD:0","LOW_BAT"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LOW_BAT"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00105BE98B23BD:0","LOW_BAT"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00105BE98B23BD:0","OPERATING_VOLTAGE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: OPERATING_VOLTAGE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00105BE98B23BD:0","OPERATING_VOLTAGE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00105BE98B23BD:0","OPERATING_VOLTAGE_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: OPERATING_VOLTAGE_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00105BE98B23BD:0","OPERATING_VOLTAGE_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00105BE98B23BD:0","RSSI_DEVICE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: RSSI_DEVICE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00105BE98B23BD:0","RSSI_DEVICE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Nov  7 10:08:14 Test-CCU-RaspiMatic-Pi4B local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Grüße
Baxxy

Antworten

Zurück zu „RaspberryMatic“