Einrichtung, Nutzung und Hilfe zu RaspberryMatic (OCCU auf Raspberry Pi)
Moderatoren: jmaus, Co-Administratoren
-
Zipf
- Beiträge: 3
- Registriert: 23.11.2020, 21:08
- System: Alternative CCU (auf Basis OCCU)
Beitrag
von Zipf » 23.11.2020, 21:13
ElektroFuchs hat geschrieben: ↑23.11.2020, 20:45
Hallo Leute,
RPI4 läuft mit 3.53.34.20201121 seit 2 Tagen bei mir soweit fehlerfrei auch Update hat problemlos geklappt.
Nachdem heute den Nachmittag das Internet für mehrere Stunden weg war hat auch alles weiterhin funktioniert.
Als das Internet wieder nun wieder funktioniert, habe ich eine Meldung zum Geräteupdate bekommen:
HMIP-PSM XXXXXXXXXXXXXX 2.6.2 2.18.14 , hat das sonst noch jemand?
Habe nichts im Netz darüber gefunden oder hat sich irgendwo ein Fehler eingeschlichen.
Aktuell ist auf dem HMIP-PSM die 2.6.2 vorhanden.
Danke nochmals an alle Mitstreiter
Gruß
Hallo
RPI4 läuft auch bei mir mit 3.53.34.20201121 fehlerfrei, auch das Update hat problemlos geklappt.
Ich habe auch das Firmware für HMIP-PSM drin. Läuft noch..........
LG Zipf
-
Bernd-Joras
- Beiträge: 732
- Registriert: 26.03.2016, 09:33
- Hat sich bedankt: 34 Mal
- Danksagung erhalten: 40 Mal
Beitrag
von Bernd-Joras » 23.11.2020, 23:25
ElektroFuchs hat geschrieben: ↑23.11.2020, 20:45
HMIP-PSM XXXXXXXXXXXXXX 2.6.2 2.18.14 , hat das sonst noch jemand?
Hallöle ... ich auch ... 4 mal .... bin dabei ... DC bei 70% anstelle von 4-8%
.. Gruss, Bernd
2 Standorte mit je RPi3B+ RaspberryMatic 3.75.7.20240420 / RPI-RF-MOD | Externe USB-Platinen Antenne | 2x LAN_RF_GW | 1x LAN_RS485_GW | ca. 170 Geräte davon 35x IP | ca. 250 Programme |>600 Kanäle | Addons: CUX-Daemon, XML-API, hm_pdetect, E-Mail, CCU-Historian
-
hpsteff
- Beiträge: 36
- Registriert: 25.11.2018, 11:36
- Hat sich bedankt: 3 Mal
- Danksagung erhalten: 1 Mal
Beitrag
von hpsteff » 24.11.2020, 00:40
Das Update hat heute gut funktioniert, merke nur dass meine über mqtt und tasmota angebundenen Lampen nicht mehr schalten.
mqtt add on läuft nicht mehr seit dem update...
gibt wohl schon einmal die Beobachtung:
https://github.com/hobbyquaker/ccu-addo ... /issues/16
hilft es das add on nochmal zu installieren?
--
Raspberrymatic add-on unter Home Assistant auf Raspberry 4.
-
Visu
- Beiträge: 507
- Registriert: 04.12.2016, 23:30
- Hat sich bedankt: 2 Mal
- Danksagung erhalten: 2 Mal
Beitrag
von Visu » 24.11.2020, 02:52
Das einspielen des Update hat super funktioniert Tinker S, ein paar Stunden später aber auch die Meldung über das Firmware für HMIP-PSM.
- up.PNG (8.7 KiB) 1695 mal betrachtet
das wäre ja dann aber wohl eher ein Downgrade, oder nicht?
-
zautrix
- Beiträge: 383
- Registriert: 22.05.2016, 18:41
- Wohnort: Badisch-Sibirien
- Danksagung erhalten: 40 Mal
Beitrag
von zautrix » 24.11.2020, 03:00
Visu hat geschrieben: ↑24.11.2020, 02:52
das wäre ja dann aber wohl eher ein Downgrade, oder nicht?
Ja klar! Ich habe Mathematik studiert und kann bestätigen, dass schon vor 20 Jahren die Zahl 18
kleiner war als die Zahl 6.
* koppschüttel*
Gruß aus Nord-Baden,
z.
-
AndiN
- Beiträge: 2621
- Registriert: 10.06.2015, 08:54
- Wohnort: Hennef
- Hat sich bedankt: 10 Mal
- Danksagung erhalten: 28 Mal
Beitrag
von AndiN » 24.11.2020, 08:45
@Zautrix:
Na... vielleicht hat sich Visu auch nur in der Spaltenreihenfolge beim Lesen vertan und dachte Aktuell wäre die 2.18 und neu die 2.6.
Dann wäre es in der Tat ein Downgrade... Denke jeder weiß das 18 höher wie 6 ist. Aber vielleicht hat er sich einfach nur verschaut und keine doofe Frage gestellt
Das immer direkt geschossen wird ohne vorher mal zu fragen...
Gruß aus dem Rheinland
Andi
Andi (Greenhorn)
Letzter Reboot: 17.03.24 => FW Update (Uptime:Rekord:153 Tage)
Systeminfos: Raspberry Pi3 Firmware: 3.75.6.20240316 142 Geräte
System angebunden: 3 Roomba 650 - Sprachausgabe via Home24 Media - Pocket Control - Zentrale: Asus TF103 mit Home24 Tablet
Addons: Drucken 2.5 - HQ WebUI 2.5.9 - XML-API 1.22 - CUx-Daemon 2.9.3 - E-Mail 1.7.4 - hm_pdetect 1.11 - VPN cloudmatic
Diverse Links
-
Knallochse
- Beiträge: 171
- Registriert: 19.05.2016, 09:42
- Hat sich bedankt: 53 Mal
- Danksagung erhalten: 11 Mal
Beitrag
von Knallochse » 24.11.2020, 09:27
Das Changelog sollte Licht ins Dunkel bringen:
Code: Alles auswählen
C H A N G E L O G
-----------------
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIP-PSM - Pluggable Switch and Meter
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1 (2 for pluggable).18.14 - 20200715
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Made some routines for testing the relay to ram functions.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).18.12 - 20200622
--------------------------------------------------------------
** Bugfix
* After inclusion, device sends bidirectional status telegrams
to the CCU after approx. 120s
Version 1 (2 for pluggable).18.10 - 20200527
** Bugfix
* BSM sends Statusframes with ARR every 3 minutes in case that
SHC did not acknowlegeded
* RSSI-value in AnswerFrame always 0dBm
* BSM does not respond to a keystroke if a switching command was previously
received on the actuator channel from an unknown link partner
** Modification
* Update to HMOS 1.46.1
Version 1 (2 for pluggable).18.6 - 20200309
** Bugfix
* Device sends answers-frame on a TimeInfo from AC to "any-router"-address
* Device sends ack frames if ARR bit is not set
Version 1 (2 for pluggable).18.4 - 20200226
** Bugfix
* Channel keys without function if external link
partner could not be reached and DisableMSGToAC = true
* Device sends status info with "Level with profile Information"
instead of "Binary with profile Information"
* Parameter DisableMSGtoAC without function
if multicast address is set as system partner
* If the button is pressed to fast after restart ,
the device does not switch permanently any more.
Version 1 (2 for pluggable).18.2 - 20200212
** Bugfix
* Device running into duty cycle if CCU or HAP is not available
* Update status info sending rules
* Configuration is not longer shown on LED,
if a key is pressed while getting config data
** New Feature
* Using status info module
Version 1 (2 for pluggable).16.0 - 20191121
** Bugfix
* Fixed inverted LEDs in bootloader (V1.14.2)
** Modification
* Update HMOS to 1.44.2
** New Feature
* Support of HmIP-FSI16
Version 1 (2 for pluggable).15.10 to 15.24 - 20191106
** Bugfix
* If possible, send multicasts only to PARTNER_ALL_WIRED_DEVICES
instead of to PARTNER_ALL_DEVICES.
* Device reboots if relay has to be switched
* fixed bug in device behavior, if message to ac is disabled
* fixed bug if factory reset is aborted
** Modification
* Modify emlib makro calls due to changes in updated emlib
* Update HMOS to 1.43.41
* Update Bootloader to 1.14
** New Feature
* Add support for switch inputs
* Add relay count feature
Version 1 (2 for pluggable).15.8 - 20190522
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Fixed a bug in the zero crossing module due to new
version of emlib.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).15.6 - 20190424
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* PowerUpAction is executed although the parameters
are not yet loaded.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).15.4 - 20190329
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Modify event counter check to meet current specification
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).15.2 - 20190308
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* If the switch-on and switch-off times in the Easy
Profile are set to "Not active" at the same time, the device hangs up.
** Improvement
*
** Comments
* Update HMOS to 1.41.58
Version 1 (2 for pluggable).15.0 - 20190227
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* FSI16 switches relay to fast if mains power fails (not waiting min
200 ms) as the the ZCD detection without measuring IC produces IRQs
only for positive half waves. Timer now has an interval of 20 ms,
so the relay is switch only if 220 ms has elapsed.
** Improvement
*
** Comments
* update HMOS to 1.41.45
Version 1 (2 for pluggable).13.12 - 20181116
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Fixed another potentially deadlock.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).13.10 - 20181115
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* HMIP_BSM-67 - Race condition may cause deadlock
** Improvement
* check of keypress counter and application sequence counter updated
** Comments
* Update HMOS to 1.39.1
Version 1 (2 for pluggable).13.8 - 20181026
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Stopped sending inclusion request on each long keypress
repetition.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).13.6 - 20180813
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Corrected sending of Status-Info
frames if the recipent (central or statusinfo receiver)
is not available.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).13.4 - 20180628
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Corrected bug with weekprogramm
at the day of daylight changeover.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).13.2 - 20180622
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Corrected bug with creating direct
execution frames in the weekprogramm.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).13.0 - 20180605
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
*
** Improvement
*
** Comments
* Increased version number due to creation of a tag.
Version 1 (2 for pluggable).11.17 - 20180601
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Increased HMOS version to 1.30.0 to be able to route
inclusion frames (with routing actuators).
** Improvement
* Added functionality and configuration
parameters to do "OFF-Actions" at powerup.
** Comments
Version 1 (2 for pluggable).11.16 - 20180309
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
*
** Improvement
*
** Comments
* Changed the default
value for the long keypress from 4s to 0,4s. Did necessary
modifications to leave the pairing function as it is.
Version 1 (2 for pluggable).11.14 - 20180223
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Added reset of measurement array after switching
to prevent next measurement to be outdated. An outdated
array may cause wrong switching!
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).11.12 - 20180216
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Corrected timeout for sequence counter (from 10 to 2 minutes).
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).11.10 - 20180214
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Corrected switching direction if switching with current
detection is disabled.
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).11.8 - 20180213
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Added sending of unknown RSSI value in two cases.
** Improvement
* Added new operation mode (minimum HMOS 1.24.0 necessary)
* Changed counting of event_counter to new mechanism
(boot:0; other:[1..252]).
* Changed checking of event_counter to new mechanism.
** Comments
*
Version 1 (2 for pluggable).11.6 - 20180205
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Fixed wrong reset of a pending flag if disable_msg_to_ac was set.
** Improvement
* Corrected some comments.
** Comments
* Changed default value for POWERUP_ONTIME from 0x00 to 0xFF.
Version 1 (2 for pluggable).11.4 - 20171219
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Fixed bug with fast switching
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).11.2 - 20171103
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Fixed a bug with sending statusframes with ACK and ARR bit
** Improvement
*
** Comments
*
Version 1 (2 for pluggable).11.0 - 20171013
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Fixed a bug with sending statusframes at actuartors
with powermeter function.
** Improvement
*
** Comments
* Increased version number due to creation of a tag.
Version 1 (2 for pluggable).9.2 - 20171006
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
* Corrected behaviour of weekprogrammm for neagtive coordiantes.
* Changed behaviour of init routines in powermeter- and switch-task.
* Fixed behaviour of sending statusmessages
for multichannel devices.
** Improvement
** Comments
Version 1 (2 for pluggable).9.1 - 20170908
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
* 1854630A
** Bugfix
** Improvement
* new parameter for suppressing messages to Access Controller
** Comments
* First release version for HmIP-PCBS2
Version 1 (2 for pluggable).8.12 - 20170719
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
* 1754501B
** Bugfix
* Statusmessage handling corrected
** Improvement
* Statusmessage handling optimized for multichannel devices
* No reboot after aborded factory reset
* new telegrams are only send if previous telegram is acked or timed out
** Comments
* First release version for HmIP-MOD-OC8
* Use of bootloader 1.10.0
Version 1 (2 for pluggable).7.6 - 20170530
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
** Bugfix
* ARR timeout is not observed
with the Info and TimeInformation frames
* LowBat Bit is not set in the status Info
** Improvement
* DataType Operating Voltage send with StatusInfo
** Comments
*
Version 1 (2 for pluggable).7.5 - 20170519
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
** Bugfix
* he device reacts with the same
event counter for an unconditional switch command.
* Device is permanently awake.
** Comments
*
Version 1 (2 for pluggable).7.4 - 20170427
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
** Bugfix
* Fixed a bug with not acting device if the
channel key was pressed at a included device.
** Comments
*
Version 1 (2 for pluggable).7.3 - 20170426
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
** Bugfix
* Increased the power to trigger a simulated
keypress from 0.1W to 1 W.
* alue for the new powerstatus is saved after
being stable for two measurements.
* Corrected default duration of weekprogramm to 0xFF.
* Corrected / Optimised sending of a normal ACK/NACK.
** Comments
*
Version 1 (2 for pluggable).7.2 - 20170425
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
** Bugfix
** Comments
* Removed ramp time from the weekprogram.
* Added sending of statusframes for the weekprogram.
(After inclusion, cyclic and on request)
* Corrected a bug with inhibit channels.
Version 1 (2 for pluggable).7.1 - 20170413
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
** Bugfix
** Comments
* Added lock feature to weekprogramm channel.
* Added delayed weekprogram status info to status info
receiver after change of lock channels.
Version 1 (2 for pluggable).7.0 - 20170405
--------------------------------------------------------------
** Related Hardware
* 1424102A + 1434181A
* 1564305B
* 1554267B
* 1454104F
* 1764508B
** Bugfix
* Increased the pulse for switching the relais
from 30 ms to 75 ms.
** Comments
* Increased version due to creation of a tag.
--- END OF FILE ---
-
klana
- Beiträge: 1099
- Registriert: 08.02.2015, 08:37
- System: Alternative CCU (auf Basis OCCU)
- Hat sich bedankt: 66 Mal
- Danksagung erhalten: 27 Mal
Beitrag
von klana » 24.11.2020, 13:33
Anfrage war hier nicht gewünscht. Deshalb gelöscht.
Zuletzt geändert von
klana am 25.11.2020, 08:43, insgesamt 1-mal geändert.
Gruß Klana
Es ist nett, wichtig zu sein. Aber es ist wichtiger, nett zu sein.
-
jmaus
- Beiträge: 9862
- Registriert: 17.02.2015, 14:45
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Dresden
- Hat sich bedankt: 464 Mal
- Danksagung erhalten: 1880 Mal
-
Kontaktdaten:
Beitrag
von jmaus » 24.11.2020, 15:01
Tut mir leid, aber all deine zusätzlichen Dinge/Fragen haben IMHO hier nichts in diesem Thread zu tun. Mach separate Beiträge auf uns hoffe auf antworten da. Diesen Sammelthread hier mit solchen Quersachen zu bombardieren die nichts unmittelbar mit der neuen Version oder dem Update auf die neue Version zu tun haben ist nicht gerade hilfreich.
-
klana
- Beiträge: 1099
- Registriert: 08.02.2015, 08:37
- System: Alternative CCU (auf Basis OCCU)
- Hat sich bedankt: 66 Mal
- Danksagung erhalten: 27 Mal
Beitrag
von klana » 24.11.2020, 16:00
Da die Error auch in der aktuellen Version auftreten
Gehört das doch wohl schon hierher.
Gruß Klana
Es ist nett, wichtig zu sein. Aber es ist wichtiger, nett zu sein.