Ich habe mich jetzt schon ein paar Tage erfolglos durch alle möglichen Foren gelesen, konnte mein Problem aber nicht lösen.
Ich habe mir eine Charly von ELV gekauft und versuche RaspberryMatic zum laufen zu bringen. Vom ersten Tag an leuchtet die LED auf dem RPI-RF-MOD dauerhaft rot und es ist nicht möglich Geräte anzulernen.
Zunächst scheint das Device erstmal erkannt zu werden:
Code: Alles auswählen
homematic-raspi:~# dmesg | grep raw
[ 2.548725] hid: raw HID events driver (C) Jiri Kosina
[ 13.160284] pl011_raw_uart 3f201000.serial: there is not valid maps for state default
[ 13.160458] pl011_raw_uart 3f201000.serial: Detected RPI-RF-MOD, using alternative reset pin
[ 13.344780] pl011_raw_uart 3f201000.serial: Initialized pl011 device; mapbase=0x3f201000; irq=99; clockrate=47999625
[ 31.841276] raw-uart raw-uart: Reset radio module
Code: Alles auswählen
homematic-raspi:~# cat /var/hm_mode
HM_HMIP_ADDRESS=''
HM_HMIP_ADDRESS_ACTIVE=''
HM_HMIP_DEV=''
HM_HMIP_DEVNODE=''
HM_HMIP_DEVTYPE=''
HM_HMIP_SERIAL=''
HM_HMIP_SGTIN=''
HM_HMIP_VERSION=''
HM_HMRF_ADDRESS=''
HM_HMRF_ADDRESS_ACTIVE=''
HM_HMRF_DEV=''
HM_HMRF_DEVNODE=''
HM_HMRF_DEVTYPE=''
HM_HMRF_SERIAL=''
HM_HMRF_VERSION=''
HM_HOST='rpi3'
HM_LED_GREEN='/sys/class/leds/led0'
HM_LED_GREEN_MODE1='mmc0'
HM_LED_GREEN_MODE2='heartbeat'
HM_LED_RED='/sys/class/leds/led1'
HM_LED_RED_MODE1='timer'
HM_LED_RED_MODE2='mmc0'
HM_LED_YELLOW=''
HM_LED_YELLOW_MODE1='none'
HM_LED_YELLOW_MODE2='none'
HM_MODE='NORMAL'
HM_RTC='rx8130'
Code: Alles auswählen
homematic-raspi:~# detect_radio_module --debug /dev/raw-uart
Sending HM frame: fd 00 03 fe 00 01 14 1e
Received HM frame: fd 00 0f fe 00 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c 68 c7
Sending HM frame: fd 00 03 fe 01 01 92 1d
Received HM frame: fd 00 0f fe 01 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c e9 c5
Sending HM frame: fd 00 03 fe 02 03 18 12
Received HM frame: fd 00 04 fe 02 05 00 87 3b
Sending HM frame: fd 00 03 00 03 00 12 00
Received HM frame: fd 00 04 00 03 04 03 19 0e
Sending HM frame: fd 00 03 fe 04 01 8c 1d
Received HM frame: fd 00 0f fe 04 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c ec c0
Sending HM frame: fd 00 03 fe 05 03 8a 11
Received HM frame: fd 00 04 fe 05 05 00 07 54
Sending HM frame: fd 00 03 00 06 00 0c 00
Received HM frame: fd 00 04 00 06 04 03 19 4a
Sending HM frame: fd 00 03 fe 07 01 86 1d
Received HM frame: fd 00 0f fe 07 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c ef c3
Sending HM frame: fd 00 03 fe 08 03 24 12
Received HM frame: fd 00 04 fe 08 05 00 87 b3
Sending HM frame: fd 00 03 00 09 00 2e 00
Received HM frame: fd 00 04 00 09 04 03 19 86
Error: Radio module was not detected
Danke und Grüße
Martin