Docker: Öffnen des Punkts Zentralen-Wartung nicht möglich

[TheUntouchable]

Hey zusammen!
Ich habe jetzt schon seit einer Zeit RaspberryMatic in einem Docker Container auf einem Raspberry PI 4 8GB mit dem HM-MOD-RPI-PCB am Laufen und habe es nach der Anleitung hier eingerichtet. Die Konfig wurde von meinem Standalone Raspberry PI 2 importiert, schien auch alles super zu funktionieren..
Bis ich den Syslog Server, an den Raspberrymatic seine Logs schickt ändern wollte
Leider kriege ich nur ein graues Overlay wenn ich auf Zentralen-Wartung klicke und egal wie lange ich warte, das ändert sich nicht. Getestet wurde im Firefox und Edge.

Ich habe sogar den kompletten Container gelöscht, alle Daten in den Volumes ebenfalls und ohne irgendwas zu importieren den Container neu erstellt, das selbe Verhalten.
In den Logs gibts ganz viele Fehler zu ReGaHss und weiteren Dingen, die mir leider nicht viel sagen:

messages:

Code: Alles auswählen

May  5 21:09:21 nw-raspmatic syslog.info syslogd started: BusyBox v1.35.0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ vgic(9) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ arch_timer(12) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ vtimer(13) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ fe004000.txp(15) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ fe00b880.mailbox(16) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ hvs(20) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ fe804000.i2c(21) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ IRQ(24) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ IRQ(26) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ IRQ(27) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ crtc(31) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ crtc(32) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ crtc(33) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ crtc(34) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ tx(35) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ rx(36) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ connected(39) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ disconnected(40) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ tx(41) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ rx(42) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ connected(45) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ disconnected(46) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ doorbell(47) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ mmc0(48) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ arm-pmu(49) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ arm-pmu(50) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ arm-pmu(51) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ arm-pmu(52) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ eth0(55) guessed as class 5
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ eth0(56) guessed as class 5
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ v3d(62) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ xhci_hcd(64) guessed as class 0
May  5 21:09:22 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ gpiolib(65) guessed as class 0
May  5 21:09:24 nw-raspmatic user.info firewall: configuration set
May  5 21:09:32 nw-raspmatic daemon.debug /usr/sbin/irqbalance: IRQ fe201000.serial(19) guessed as class 0
May  5 21:09:34 nw-raspmatic daemon.err xinetd[351]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
May  5 21:09:34 nw-raspmatic daemon.crit xinetd[351]: 351 {init_services} no services. Exiting...
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: CUx-Daemon(2.8) on CCU(3.63.9.20220430) start PID:395
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: write_pid /var/run/cuxd.pid [395]
May  5 21:09:35 nw-raspmatic user.info cuxd: started cux-daemon
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:760 update(-83s):Thu May  5 21:08:12 2022
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: 1 device-paramset(s) loaded ok!
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: write_proxy /var/cache/cuxd_proxy.ini (395 /usr/local/addons/cuxd/ 2.8 3.63.9.20220430 0)
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: add interface 'CUxD'
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: write interface(1) 'BidCos-RF' to /usr/local/etc/config/InterfacesList.xml
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: write interface(2) 'VirtualDevices' to /usr/local/etc/config/InterfacesList.xml
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: write interface(3) 'HmIP-RF' to /usr/local/etc/config/InterfacesList.xml
May  5 21:09:35 nw-raspmatic daemon.info cuxd[395]: write interface(4) 'CUxD' to /usr/local/etc/config/InterfacesList.xml
May  5 21:09:35 nw-raspmatic user.info root: Updating RF Lan Gateway Coprocessor Firmware
May  5 21:09:35 nw-raspmatic user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
May  5 21:09:35 nw-raspmatic user.info root: Updating RF Lan Gateway Firmware
May  5 21:09:35 nw-raspmatic user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
May  5 21:10:21 nw-raspmatic daemon.warn cuxd[395]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
May  5 21:10:25 nw-raspmatic daemon.warn cuxd[395]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
May  5 21:10:27 nw-raspmatic user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
May  5 21:10:33 nw-raspmatic daemon.info : starting pid 771, tty '': '/bin/mv /tmp/boot.log /var/log/boot.log'
May  5 21:10:33 nw-raspmatic daemon.info : starting pid 772, tty '/dev/null': '/usr/bin/monit -Ic /etc/monitrc'
May  5 21:10:33 nw-raspmatic user.info monit[772]: Starting Monit 5.30.0 daemon with http interface at /var/run/monit.sock
May  5 21:10:33 nw-raspmatic user.info monit[772]: 'nw-raspmatic' Monit 5.30.0 started
May  5 21:10:36 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","ENERGY_COUNTER"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:10:36 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","ENERGY_COUNTER"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:10:36 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:10:36 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","ENERGY_COUNTER_OVERFLOW"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVERFLOW"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:10:36 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","ENERGY_COUNTER_OVERFLOW"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:10:36 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:10:37 nw-raspmatic user.debug script: [ALCHY ALLINScript START]
May  5 21:10:37 nw-raspmatic user.debug script: [ALCHY ALLINScript Abbruch BLOCK21]
May  5 21:10:48 nw-raspmatic daemon.info cuxd[395]: INIT 'xmlrpc_bin://127.0.0.1:31999' '1332'
May  5 21:10:53 nw-raspmatic user.err monit[772]: 'sshdEnabled' status failed (1) -- no output
May  5 21:10:53 nw-raspmatic user.err monit[772]: 'hs485dEnabled' status failed (2) -- grep: /var/etc/hs485d.conf: No such file or directory
May  5 21:10:53 nw-raspmatic user.err monit[772]: 'hmlangwEnabled' status failed (1) -- no output
May  5 21:10:54 nw-raspmatic user.warn monit[772]: 'hasUSB' status failed (1) -- no output
May  5 21:10:54 nw-raspmatic user.err monit[772]: 'hb_rf_eth-CheckEnabled' status failed (1) -- no output
May  5 21:10:54 nw-raspmatic user.err monit[772]: 'coProcessorCheck' status failed (1) -- no output
May  5 21:10:54 nw-raspmatic user.warn monit[772]: 'rpi4usb3Check' status failed (1) -- no output
May  5 21:10:54 nw-raspmatic user.err monit[772]: 'tailscaleEnabled' status failed (1) -- no output
May  5 21:10:54 nw-raspmatic user.err monit[772]: Lookup for '/media/usb1' filesystem failed  -- not found in /proc/self/mounts
May  5 21:10:54 nw-raspmatic user.err monit[772]: Filesystem '/media/usb1' not mounted
May  5 21:10:54 nw-raspmatic user.err monit[772]: 'usb1' unable to read filesystem '/media/usb1' state
May  5 21:10:54 nw-raspmatic user.info monit[772]: 'usb1' trying to restart
May  5 21:10:56 nw-raspmatic user.debug script: [ALCHY ALLINScript START]
May  5 21:10:56 nw-raspmatic user.debug script: [ALCHY ALLINScript Abbruch BLOCK21]
May  5 21:11:10 nw-raspmatic user.warn monit[772]: 'hasUSB' status failed (1) -- no output
May  5 21:11:11 nw-raspmatic user.warn monit[772]: 'rpi4usb3Check' status failed (1) -- no output
May  5 21:11:11 nw-raspmatic user.err monit[772]: Filesystem '/media/usb1' not mounted
May  5 21:11:11 nw-raspmatic user.err monit[772]: 'usb1' unable to read filesystem '/media/usb1' state
May  5 21:11:11 nw-raspmatic user.info monit[772]: 'usb1' trying to restart
May  5 21:11:27 nw-raspmatic user.warn monit[772]: 'hasUSB' status failed (1) -- no output
May  5 21:11:27 nw-raspmatic user.err monit[772]: 'rpi4usb3Check' status failed (1) -- no output
May  5 21:11:27 nw-raspmatic user.err monit[772]: Filesystem '/media/usb1' not mounted
May  5 21:11:27 nw-raspmatic user.err monit[772]: 'usb1' unable to read filesystem '/media/usb1' state
May  5 21:11:27 nw-raspmatic user.info monit[772]: 'usb1' trying to restart
May  5 21:11:43 nw-raspmatic user.warn monit[772]: 'hasUSB' status failed (1) -- no output
May  5 21:11:43 nw-raspmatic user.err monit[772]: Filesystem '/media/usb1' not mounted
May  5 21:11:43 nw-raspmatic user.err monit[772]: 'usb1' unable to read filesystem '/media/usb1' state
May  5 21:11:43 nw-raspmatic user.info monit[772]: 'usb1' trying to restart
May  5 21:11:59 nw-raspmatic user.err monit[772]: 'hasUSB' status failed (1) -- no output
May  5 21:16:02 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:4","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:16:02 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:4","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:16:02 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","UNREACH"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: UNREACH"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","UNREACH"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","ACTUAL_TEMPERATURE_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","ACTUAL_TEMPERATURE_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","DUTY_CYCLE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: DUTY_CYCLE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","DUTY_CYCLE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","ERROR_CODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ERROR_CODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","ERROR_CODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","ERROR_OVERHEAT"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ERROR_OVERHEAT"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","ERROR_OVERHEAT"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","OPERATING_VOLTAGE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: OPERATING_VOLTAGE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","OPERATING_VOLTAGE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","OPERATING_VOLTAGE_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: OPERATING_VOLTAGE_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","OPERATING_VOLTAGE_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","RSSI_DEVICE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: RSSI_DEVICE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","RSSI_DEVICE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:0","RSSI_PEER"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: RSSI_PEER"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:0","RSSI_PEER"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:3","PROCESS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:3","PROCESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:3","SECTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:3","SECTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:3","SECTION_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:3","SECTION_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:3","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:3","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:4","PROCESS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:4","PROCESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:4","SECTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:4","SECTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:4","SECTION_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:4","SECTION_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:5","PROCESS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:5","PROCESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:5","SECTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:5","SECTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:5","SECTION_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:5","SECTION_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:5","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:5","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:6","PROCESS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:6","PROCESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:6","SECTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:6","SECTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:6","SECTION_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:6","SECTION_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:6","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:6","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","CURRENT"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: CURRENT"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","CURRENT"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","CURRENT_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: CURRENT_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","CURRENT_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","FREQUENCY"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: FREQUENCY"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","FREQUENCY"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","FREQUENCY_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: FREQUENCY_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","FREQUENCY_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","POWER"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: POWER"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","POWER"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","POWER_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: POWER_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","POWER_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","VOLTAGE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: VOLTAGE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","VOLTAGE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:7","VOLTAGE_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: VOLTAGE_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:7","VOLTAGE_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00085BE9A013A8:9","WEEK_PROGRAM_CHANNEL_LOCKS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: WEEK_PROGRAM_CHANNEL_LOCKS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {"00085BE9A013A8:9","WEEK_PROGRAM_CHANNEL_LOCKS"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"OEQ1668401:7","DECISION_VALUE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1010, params: {"OEQ1668401:7","DECISION_VALUE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
May  5 21:17:08 nw-raspmatic user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
May  5 21:17:08 nw-raspmatic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"OEQ1668443:7","DECISION_VALUE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1010, params: {"OEQ1668443:7","DECISION_VALUE"}) [CallGetValue():iseXmlRpc.cpp:1435]
May  5 21:17:08 nw-raspmatic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]

Bootlog:

Code: Alles auswählen

Starting watchdog...
Identifying host system: oci, OK
Initializing RTC Clock: no hardware found
Running sysctl: OK
Checking for Factory Reset: not required
Checking for Backup Restore: not required
Initializing System: OK
Starting logging: OK
Populating /dev using udev: done
Init onboard LEDs: init, OK
Starting irqbalance: OK
Starting iptables: OK
Starting network: eth0: link up, fixed, firewall, inet up, 192.168.60.4, OK
Identifying Homematic RF-Hardware: ....HmRF: HM-MOD-RPI-PCB/GPIO@fe201000.serial, HmIP: HM-MOD-RPI-PCB/GPIO@fe201000.serial, OK
Updating Homematic RF-Hardware: HM-MOD-RPI-PCB: 2.8.6, not necessary, OK
Starting hs485dLoader: disabled
Starting xinetd: OK
Starting eq3configd: OK
Starting lighttpd: OK
Starting ser2net: disabled
Starting ssdpd: OK
Starting NUT services: disabled
Initializing Third-Party Addons: OK
Starting LGWFirmwareUpdate: ...OK
Setting LAN Gateway keys: OK
Starting hs485d: disabled
Starting multimacd: .OK
Starting rfd: ...OK
Starting HMIPServer: ......................OK
Starting ReGaHss: .OK
Starting CloudMatic: OK
Starting NeoServer: OK
Starting Third-Party Addons: OK
Starting crond: OK
Setup onboard LEDs: booted, OK
Finished Boot: 3.63.9.20220430 (raspmatic_oci_arm64)

Weis wer was ich noch tun kann..?

docker-compose:

Code: Alles auswählen

version: "3.8"
services:
  raspmatic:
    image: ghcr.io/jens-maus/raspberrymatic:latest
    container_name: raspmatic
    hostname: nw-raspmatic
    privileged: true
    restart: always
    stop_grace_period: 30s
    volumes:
      - NFS_raspmatic_data:/usr/local:rw
      - /lib/modules:/lib/modules:ro
      - /run/udev/control:/run/udev/control
    mac_address: 02:42:c0:a8:3c:04
    networks:
      MACVLAN_NETW_VLAN60_Docker_Container:
        ipv4_address: 192.168.60.4
      
volumes:
  NFS_raspmatic_data:
    external: true

networks:
  MACVLAN_NETW_VLAN60_Docker_Container:
    external: true

org.opencontainers.image.version 3.63.9.20220430

Danke im Voraus!

[jmaus]

Bis ich den Syslog Server, an den Raspberrymatic seine Logs schickt ändern wollte
Leider kriege ich nur ein graues Overlay wenn ich auf Zentralen-Wartung klicke und egal wie lange ich warte, das ändert sich nicht. Getestet wurde im Firefox und Edge.

Dann schau bitte mal in deine Browser Konsole nach möglichen Javascript Fehlern die dort möglicherweise ausgegeben/angezeigt werden.

[TheUntouchable]

Klaro! Ich habe die Konsole geleert, bevor ich auf die Zentral-Wartung geklickt habe. Leider kam da nicht viel bei raus..

[TheUntouchable]

Keine Ideen? =/

[TheUntouchable]

Kleiner Push, auch mit der letzten Version krieg ich die Zentral-Wartung immer noch nicht auf..

[jmaus]

Schau in /usr/local/tmp auf der Zentrale ob dort "cgimail.*" Fehlerdateien zu finden sind.

[TheUntouchable]

Jap, hab was gefunden!

Code: Alles auswählen

/usr/local/tmp # ls -al
total 4
drwxr-xr-x    1 root     root            62 Oct 14 14:07 .
drwxr-xr-x    1 root     root            72 Feb 11  2022 ..
-rw-r--r--    1 root     root             0 Nov 22  2020 .nobackup
-rw-r--r--    1 root     root             0 Oct 11 04:18 .watchdog
-rw-r--r--    1 root     root           656 Oct 14 14:07 cgimail.26048
/usr/local/tmp # cat cgimail.26048 
Return-Path: <CGI script - do not reply>
From:  <CGI script - do not reply>
To: root
Subject:  CGI problem

CGI environment:
REQUEST_METHOD: POST
SCRIPT_NAME: /config/cp_maintenance.cgi
HTTP_USER_AGENT: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:105.0) Gecko/20100101 Firefox/105.0
HTTP_HOST: nw-raspmatic.home
REMOTE_ADDR: 192.168.1.100
cgi.tcl version: 1.10.0
input:

cookie:
errorInfo:
can't use non-numeric string as operand of "/"
    while executing
"expr {$USERFSFREE_MB / 1024.0}"
    (procedure "action_put_page" line 6)
    invoked from within
"action_put_page"
    invoked from within
"if {[session_requestisvalid 8] > 0} then action_$action"
/usr/local/tmp #

[jmaus]

Jap, hab was gefunden!

Code: Alles auswählen

can't use non-numeric string as operand of "/"
    while executing
"expr {$USERFSFREE_MB / 1024.0}"

Das ist in der Tat sehr interessant das es bei dir wohl ein Problem mit der $USERFSFREE_MB Variable gibt.

Diese wird eigentlich durch folgendes Kommando belegt:

Code: Alles auswählen

execCmd USERFSFREE_MB {exec df -m /usr/local | tail -1 | awk {{ print $4 }}}

Probier mal bitte innerhalb einer SSH bzw. Docker cli session des RaspberryMatic Containers folgendes Kommando auszuführen:

Code: Alles auswählen

df -m /usr/local | tail -1 | awk '{ print $4 }'

Dann schauen wir mal weiter warum das Kommando in deiner Docker Umgebung anscheinend fehl schlägt...

[TheUntouchable]

Ich bin schon froh, dass es anscheinend nicht daran liegt, dass ich mich blöd anstelle

Code: Alles auswählen

/usr/local/tmp # df -m /usr/local | tail -1 | awk '{ print $4 }'
34%

Ich schätze Mal, $USERFSFREE_MB sollte eigentlich etwas in MB ausgeben und nicht in % oder?

Code: Alles auswählen

/usr/local/tmp # df -m /usr/local
Filesystem           1M-blocks      Used Available Use% Mounted on
:/volume1/raspdocker_nfs/raspmatic/data
                       1826888    618560   1208328  34% /usr/local

Es scheint so, als wäre die richtige Ausgabe bei mir nicht das 4. Token Liegt das an dem NFS Share?

[jmaus]

Gib mal folgendes ein:

Code: Alles auswählen

df -m /usr/local | tail -1 | awk '{ print $(NF-2) }'

Dann sollte der richtige Wert ausgegeben werden.