Yahm Homematic IP

[Daimler]

Hi,

hätte ja sein können, dass ....
Aber ich verstehe den Leo.

Wimre habe ich bei mir im Testsystem auch die 'Non-Pixel' mit IP befüttert - lief eigentlich ohne Probleme:

[leonsio]

Hi,

ich habe es heute mal probiert, allerdings mit einem nicht-Pixel jessie (2017-04-10-raspbian-jessie-lite.zip), beim apt-get upgrade kommt wohl auch ein neuer Kernel, aber auch ein Versuch ohne apg-get upgrade bringt die gleiche Fehlermeldung:

Code: Alles auswählen

Executing homematic-ip module_install()
Something is wrong, loaded kernel 4.9.24 is newer then last rpi-update () or dpkg () installed versions, own kernel buils are not supported

Irgendwelche Tipps?

Der Familienvater

hi mach mal folgendes

uname -a
dpkg -l | grep raspb
dpkg -l | grep kernel

und poste die ausgabe

[Familienvater]

Hi,

Code: Alles auswählen

root@raspberrypi:~# uname -a
Linux raspberrypi 4.9.24-v7+ #993 SMP Wed Apr 26 18:01:23 BST 2017 armv7l GNU/Linux

root@raspberrypi:~# dpkg -l | grep raspb
ii  libraspberrypi-bin             1.20170427-1                     armhf        Miscellaneous Raspberry Pi utilities
ii  libraspberrypi-dev             1.20170427-1                     armhf        EGL/GLES/OpenVG/etc. libraries for the Raspberry Pi's VideoCore IV (headers)
ii  libraspberrypi-doc             1.20170427-1                     armhf        EGL/GLES/OpenVG/etc. libraries for the Raspberry Pi's VideoCore IV (headers)
ii  libraspberrypi0                1.20170427-1                     armhf        EGL/GLES/OpenVG/etc. libraries for the Raspberry Pi's VideoCore IV
ii  raspberrypi-bootloader         1.20170427-1                     armhf        Raspberry Pi bootloader
ii  raspberrypi-kernel             1.20170427-1                     armhf        Raspberry Pi bootloader
ii  raspberrypi-net-mods           1.2.5                            all          Network configuration for the Raspberry Pi UI
ii  raspberrypi-sys-mods           20170313                         all          System tweaks for the Raspberry Pi
ii  raspbian-archive-keyring       20120528.2                       all          GnuPG archive keys of the raspbian archive

root@raspberrypi:~# dpkg -l | grep kernel
ii  kmod                           18-3                             armhf        tools for managing Linux kernel modules
ii  libdrm2:armhf                  2.4.71-1+rpi1                    armhf        Userspace interface to kernel DRM services -- runtime
ii  raspberrypi-kernel             1.20170427-1                     armhf        Raspberry Pi bootloader
ii  rsyslog                        8.4.2-1+deb8u2                   armhf        reliable system and kernel logging daemon

Danke,
der Familienvater

[Milahn]

Hallo,

da ich nun mittlerweile doch am verzweifeln bin, wende ich mich nochmal an euch. Ich habe mit mittlerweile einen EQ3 Thermostat HMIP geholt und versuche das an meinem RPi3 mit YAHM anzumelden. Der Anlernmodus timed ohne FM aus und findet nichts. Ich habe nun schon mehrere male YAHM neu installiert in folgender Reihenfolge:
- Raspbian Jessi Lite vom 10/04/2017
- raspi-config
- KEIN apt-get update und upgrade da es hier, wie mein Vorredner schon schrieb, aktuell Probleme mit der YAHM Installation gibt
- YAHM aus dem Develop-Branch installiert --> Ohne FM
- hm-mod-rpi-pcb enable --> Ohne FM
- reboot
- homematic-ip enable --> Ohne FM
- reboot

System scheint einwandfrei zu laufen. Ich konnte auch die FM und die SN des pcb-Moduls auslesen. Da ich nach mehreren versuchen schon an einen HW-Defekt dachte, habe ich mal Just4Fun RespbianMatic in der aktuellsten Version installiert. Anlernmodus gestartet und sofort Thermostat gefunden. Also HW i.O. Dann RespbianMatic in einer älteren Version installiert um die Modul-FM downzugraden. Hat auch funktioniert. Modul hatte danach die FM 1.4.x. Dann wieder YAHM installiert mit obiger Reihenfolge. Alles ohne FM oder Probleme. FW des Moduls ausgelesen, wurde seitens YAHM auf 2.8.x upgegraded. Aber das Thermostat wird nicht gefunden.

Was mache ich falsch ????

Ich komme zwar ganz gut mit Linux klar aber bei YAHM bin ich Neuling

EDIT: Ich habe gerade über die CCU-Weboberfläche ins Log geschaut, dort steht zum Zeitpunkt des Anlernversuches folgende FM:

Code: Alles auswählen

Jun  5 18:23:21 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ExecError= Execution failed: [-1] 0 0x00 [0] 97 0x61 [1] 0 0x00 [2] 99 0x63 [3] 0 0x00 [4] 100 0x64  [../Platform/DOM/iseESPexec.cpp (11622)]

Ich weiß ja nicht ob das was zu sagen hat

Gruß
Micha

[Kombjuder]

Hallo Gemeinde,

ich weiss auch nicht mehr weiter.

Raspi 3 mit hm-mod-rpi-pcb, Raspian Pixel aktuell.
eth0 und die yahmbrige haben die selbe MAC. Damit nimmt die Bridge dem eth0 die ip-Adresse weg.
Kann man die MAC vom Container irgendwo manuell editieren?

Es treten keine Fehlermeldungen auf, auch das hm-mod-rpi-pcb sei erfolgreich gestartet.

[robsdobs]

Hallo,

ich wollte heute das homematic-ip Modul aktivieren, da ich vor habe Homematic IP Komponenten zuzulegen. Leider hat dies nicht funktioniert:

Code: Alles auswählen

pi@raspberrypi:~ $ sudo yahm-module -m homematic-ip enable

!!! You are using develop branch, this branch is unstable. Using at your own risk !!!!

Executing homematic-ip module_install()
modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/4.9.28-v7+/modules.dep.bin'
gzip: /proc/config.gz: No such file or directory
Stopping rfd and multimac services, to detect module firmware
Stopping multimacd: OK
Stopping rfd: OK
Updating sources
Installing dependencies
Kernel module amba_pl011 already shared! Skipping
Building Homematic-IP modules
Building eq3_loop kernel module
make -C /lib/modules/4.9.28-v7+/build M=/opt/YAHM/share/tools/kernel-modules/eq3_char_loop modules
make[1]: *** /lib/modules/4.9.28-v7+/build: Datei oder Verzeichnis nicht gefunden.  Schluss.
Makefile:4: recipe for target 'all' failed
make: *** [all] Error 2
Problem while building eq3_char_loop module, exit

Was kann ich machen?

Danke & Gruß
Robert

[leonsio]

Hallo,

ich wollte heute das homematic-ip Modul aktivieren, da ich vor habe Homematic IP Komponenten zuzulegen. Leider hat dies nicht funktioniert:

Code: Alles auswählen

pi@raspberrypi:~ $ sudo yahm-module -m homematic-ip enable

!!! You are using develop branch, this branch is unstable. Using at your own risk !!!!

Executing homematic-ip module_install()
modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/4.9.28-v7+/modules.dep.bin'
gzip: /proc/config.gz: No such file or directory
Stopping rfd and multimac services, to detect module firmware
Stopping multimacd: OK
Stopping rfd: OK
Updating sources
Installing dependencies
Kernel module amba_pl011 already shared! Skipping
Building Homematic-IP modules
Building eq3_loop kernel module
make -C /lib/modules/4.9.28-v7+/build M=/opt/YAHM/share/tools/kernel-modules/eq3_char_loop modules
make[1]: *** /lib/modules/4.9.28-v7+/build: Datei oder Verzeichnis nicht gefunden.  Schluss.
Makefile:4: recipe for target 'all' failed
make: *** [all] Error 2
Problem while building eq3_char_loop module, exit

Was kann ich machen?

Danke & Gruß
Robert

führe per rpi-update den Kernel Update durch und probiere es nochmal, bzw installiere per apt-get den kernel neu

[robsdobs]

Danke.

Wer mal ähnliche Probleme hat,

Code: Alles auswählen

 sudo rpi-update

wollte bei mir nicht, weil es das angeblich nicht gibt.

Das folgende hat aber funktioniert:

Code: Alles auswählen

sudo apt-get install --reinstall raspberrypi-bootloader raspberrypi-kernel

Mit

Code: Alles auswählen

sudo apt-get install rpi-update

hat dann auch

Code: Alles auswählen

sudo rpi-update

funktioniert.

Jetzt läuft erstmal die Installation des homematic-ip Moduls.

[robsdobs]

Die Installation scheint durchgelaufen zu sein. Es gab einen Reboot.

Jetzt ist allerdings das Funkmodul nicht mehr erreichbar.

Hier das Logfile:

Code: Alles auswählen

Aug  2 20:48:38 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Aug  2 20:48:38 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2017-07-17 14:07:03 CEST)
Aug  2 18:48:38 homematic-ccu2 daemon.err udevd[56]: specified group 'dialout' unknown
Aug  2 18:48:38 homematic-ccu2 daemon.err udevd[56]: specified group 'kmem' unknown
Aug  2 18:48:38 homematic-ccu2 daemon.err udevd[56]: specified group 'video' unknown
Aug  2 18:48:38 homematic-ccu2 daemon.err udevd[56]: specified group 'lp' unknown
Aug  2 18:48:38 homematic-ccu2 daemon.err udevd[56]: specified group 'floppy' unknown
Aug  2 18:48:38 homematic-ccu2 daemon.err udevd[56]: specified group 'cdrom' unknown
Aug  2 18:48:38 homematic-ccu2 daemon.err udevd[56]: specified group 'tape' unknown
Aug  2 18:48:38 homematic-ccu2 daemon.err udevd[58]: inotify_add_watch(6, /dev/mmcblk0, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[59]: inotify_add_watch(6, /dev/mmcblk0p2, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[58]: inotify_add_watch(6, /dev/mmcblk0p1, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[119]: inotify_add_watch(6, /dev/loop1, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[118]: inotify_add_watch(6, /dev/loop0, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[120]: inotify_add_watch(6, /dev/loop2, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[123]: inotify_add_watch(6, /dev/loop4, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[127]: inotify_add_watch(6, /dev/loop7, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[126]: inotify_add_watch(6, /dev/loop6, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[122]: inotify_add_watch(6, /dev/loop3, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[132]: inotify_add_watch(6, /dev/ram12, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[125]: inotify_add_watch(6, /dev/loop5, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[136]: inotify_add_watch(6, /dev/ram2, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[128]: inotify_add_watch(6, /dev/ram0, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[133]: inotify_add_watch(6, /dev/ram13, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[137]: inotify_add_watch(6, /dev/ram3, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[134]: inotify_add_watch(6, /dev/ram14, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[135]: inotify_add_watch(6, /dev/ram15, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[138]: inotify_add_watch(6, /dev/ram4, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[130]: inotify_add_watch(6, /dev/ram10, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[129]: inotify_add_watch(6, /dev/ram1, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[143]: inotify_add_watch(6, /dev/ram7, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[142]: inotify_add_watch(6, /dev/ram6, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[131]: inotify_add_watch(6, /dev/ram11, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[145]: inotify_add_watch(6, /dev/ram9, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[139]: inotify_add_watch(6, /dev/ram5, 10) failed: No such file or directory
Aug  2 18:48:39 homematic-ccu2 daemon.err udevd[144]: inotify_add_watch(6, /dev/ram8, 10) failed: No such file or directory
Aug  2 18:48:40 homematic-ccu2 daemon.err udevd[64]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
Aug  2 18:48:40 homematic-ccu2 daemon.err udevd[58]: inotify_add_watch(6, /dev/sda, 10) failed: No such file or directory
Aug  2 18:48:40 homematic-ccu2 daemon.info ifplugd(eth0)[286]: ifplugd 0.28 initializing.
Aug  2 18:48:40 homematic-ccu2 daemon.info ifplugd(eth0)[286]: Using interface eth0/4A:49:43:49:79:6E with driver <veth> (version: 1.0)
Aug  2 18:48:40 homematic-ccu2 daemon.info ifplugd(eth0)[286]: Using detection mode: SIOCETHTOOL
Aug  2 18:48:40 homematic-ccu2 daemon.info ifplugd(eth0)[286]: Initialization complete, link beat detected.
Aug  2 18:48:40 homematic-ccu2 daemon.warn ifplugd(eth0)[286]: Beep failure, disabled.
Aug  2 18:48:40 homematic-ccu2 daemon.info ifplugd(eth0)[286]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Aug  2 18:48:40 homematic-ccu2 daemon.warn ifplugd(eth0)[286]: client: sysctl: error: 'net.ipv4.tcp_timestamps' is an unknown key
Aug  2 18:48:40 homematic-ccu2 daemon.warn ifplugd(eth0)[286]: client: eth0 carrier detected
Aug  2 18:48:40 homematic-ccu2 daemon.err udevd[59]: inotify_add_watch(6, /dev/sdb1, 10) failed: No such file or directory
Aug  2 18:48:41 homematic-ccu2 daemon.err udevd[61]: inotify_add_watch(6, /dev/sdb2, 10) failed: No such file or directory
Aug  2 18:48:41 homematic-ccu2 user.err : Could not read serial number
Aug  2 20:48:41 homematic-ccu2 user.debug setclock: Try to get time from fritz.box
Aug  2 20:48:41 homematic-ccu2 user.debug setclock: Wed Aug 2 20:48:41 CEST 2017
Aug  2 18:48:41 homematic-ccu2 daemon.info ifplugd(eth0)[286]: Program executed successfully.
Aug  2 18:48:41 homematic-ccu2 auth.info sshd[362]: Server listening on 0.0.0.0 port 22.
Aug  2 18:48:41 homematic-ccu2 auth.info sshd[362]: Server listening on :: port 22.
Aug  2 20:48:41 homematic-ccu2 daemon.info cuxd[375]: write_pid /var/run/cuxd.pid [375]
Aug  2 20:48:41 homematic-ccu2 daemon.info cuxd[375]: CUx-Daemon(1.10a) on CCU(2.29.18) start PID:375
Aug  2 20:48:41 homematic-ccu2 daemon.info cuxd[375]: load paramsets(/tmp/cuxd.ps.sav) size:14189 update(-289s):Wed Aug  2 20:43:52 2017
Aug  2 20:48:41 homematic-ccu2 user.info homematic: started cux-daemon
Aug  2 18:48:41 homematic-ccu2 user.info logger: Updating RF Lan Gateway Coprocessor Firmware
Aug  2 20:48:41 homematic-ccu2 daemon.info cuxd[375]: write_proxy /var/cache/cuxd_proxy.ini (127.0.0.1 8700 375 /usr/local/addons/cuxd/ 1.10a)
Aug  2 20:48:41 homematic-ccu2 daemon.info cuxd[375]: add interface 'CUxD'
Aug  2 20:48:41 homematic-ccu2 daemon.info cuxd[375]: write 5 interfaces to /usr/local/etc/config/InterfacesList.xml
Aug  2 18:48:41 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Aug  2 18:48:41 homematic-ccu2 user.info update-coprocessor: performGatewayCoproUpdate(): updating KEQ1064973
Aug  2 18:48:42 homematic-ccu2 daemon.err udevd[58]: inotify_add_watch(6, /dev/sda, 10) failed: No such file or directory
Aug  2 18:48:42 homematic-ccu2 daemon.err udevd[61]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
Aug  2 18:48:42 homematic-ccu2 daemon.err udevd[58]: inotify_add_watch(6, /dev/sda, 10) failed: No such file or directory
Aug  2 18:48:42 homematic-ccu2 daemon.err udevd[59]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
Aug  2 18:48:43 homematic-ccu2 user.err update-coprocessor: Could not find gateway by unicast with ip 192.168.178.207. Trying search by serial number.
Aug  2 18:48:51 homematic-ccu2 user.err update-coprocessor: Could not find Lan Gateway using ip and serial number
Aug  2 18:48:55 homematic-ccu2 user.err update-coprocessor: UnifiedLanCommController::connect(): Unable to connect.
Aug  2 18:48:55 homematic-ccu2 user.err update-coprocessor: Could not connect to Lan Gateway ip: 192.168.178.207.
Aug  2 18:48:55 homematic-ccu2 user.info logger: Updating RF Lan Gateway Firmware
Aug  2 18:48:55 homematic-ccu2 user.info update-lgw-firmware: LAN Gateway Firmware Update...
Aug  2 18:48:55 homematic-ccu2 user.info update-lgw-firmware: Gateway KEQ1064973
Aug  2 18:48:57 homematic-ccu2 user.err update-lgw-firmware: Could not find gateway by unicast with ip 192.168.178.207. Trying search by serial number.
Aug  2 20:49:02 homematic-ccu2 daemon.info cuxd[375]: INIT 'xmlrpc_bin://192.168.178.220:8701' 'hm-rpc.2'
Aug  2 18:49:05 homematic-ccu2 user.err update-lgw-firmware: Could not find Lan Gateway using ip and serial number
Aug  2 18:49:05 homematic-ccu2 user.info logger: Updating Wired Lan Gateway Firmware
Aug  2 18:49:05 homematic-ccu2 user.info update-lgw-firmware: LAN Gateway Firmware Update...
Aug  2 18:49:05 homematic-ccu2 user.info update-lgw-firmware: Gateway LEQ0636689
Aug  2 18:49:07 homematic-ccu2 user.info update-lgw-firmware: Gateway type is eQ3-HMW-LGW-App
Aug  2 18:49:07 homematic-ccu2 user.info update-lgw-firmware: Available Firmware Version:   1.0.5
Aug  2 18:49:07 homematic-ccu2 user.info update-lgw-firmware: Lan Gateway Firmware Version: 1.0.5
Aug  2 18:49:07 homematic-ccu2 user.info update-lgw-firmware: Firmware is up to date
Aug  2 18:49:09 homematic-ccu2 user.info setlgwkey: Performing key exchange for lan gateway LEQ0636689
Aug  2 18:49:11 homematic-ccu2 user.err setlgwkey: Key exchange failed.
Aug  2 20:49:13 homematic-ccu2 user.err multimac: HomeMatic Coprocessor detected!!! Please install DualCoPro Firmware 
Aug  2 20:49:13 homematic-ccu2 user.info kernel: [  648.267422] eq3loop: eq3loop_close_master() mmd_bidcos
Aug  2 20:49:13 homematic-ccu2 user.info kernel: [  648.267830] eq3loop: eq3loop_close_master() ttyS0
Aug  2 20:49:18 homematic-ccu2 user.err rfd: UnifiedLanCommController::connect(): Unable to connect.
Aug  2 20:49:18 homematic-ccu2 user.crit rfd: CCU2LGWCommController::init(): Cannot connect to HomeMatic Lan Gateway with serial number KEQ1064973.
Aug  2 20:49:18 homematic-ccu2 user.err rfd: No BidCoS-Interface available
Aug  2 20:49:28 homematic-ccu2 user.info kernel: [  662.750299] eq3loop: eq3loop_open_slave() ttyS0
Aug  2 20:49:28 homematic-ccu2 user.info kernel: [  662.760281] eq3loop: eq3loop_open_slave() ttyS0
Aug  2 20:50:41 homematic-ccu2 daemon.err cuxd[375]: AUTOMOUNT system(ln -s /media/sd-mmcblk0 /tmp/sd) exit(1)
Aug  2 18:54:19 homematic-ccu2 daemon.info init: starting pid 736, tty '/dev/tty1': '/sbin/getty -L tty1 115200 linux'
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","1007"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [iseXmlRpc.cpp:1227]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=BidCos-RF [iseRTHss.cpp:163]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","1236"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [iseXmlRpc.cpp:1227]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=VirtualDevices [iseRTHss.cpp:163]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"MEQ1113087:1","STATE"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"MEQ1113087:1","STATE_UNCERTAIN"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"MEQ1113087:1","INHIBIT"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"MEQ1113087:1","ERROR"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:30 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:31 homematic-ccu2 daemon.info cuxd[375]: INIT 'xmlrpc_bin://127.0.0.1:1999' '2415'
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","3639"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [iseXmlRpc.cpp:1227]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=HmIP-RF [iseRTHss.cpp:163]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","51287"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [iseXmlRpc.cpp:1227]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=Homegear [iseRTHss.cpp:163]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"*LEQ0389382:1","STATE"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"*NEQ0244449:1","STATE"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"*NEQ0243096:1","STATE"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0946462:1","STATE"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0946241:1","STATE"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0626208:1","STATE"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0626635:1","STATE"} result= nil [iseXmlRpc.cpp:2635]
Aug  2 20:54:31 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1455]

Ich habe das Funkmodul bereits deaktiviert und wieder aktiviert.

Code: Alles auswählen

sudo yahm-module -m hm-mod-rpi-pcb enable

[leonsio]

hi es scheint als wären die Kernel module da, aber es würde die richtige FW auf dem Funkmodul fehlen

Code: Alles auswählen

Aug  2 20:49:13 homematic-ccu2 user.err multimac: HomeMatic Coprocessor detected!!! Please install DualCoPro Firmware 

führe die Installation von homematic-ip nochmal aus (wird schneller gehen, da kein kernel bau notwendig ist) jedoch mit -f (force) und mit -v (verbose) durch
achte auf den Schritt

Code: Alles auswählen

    info "Updating firmware for DualCoPro configuration"

ggf poste den Output hier und poste zusätzlich den Output von

Code: Alles auswählen

 ls -al /dev